93 models
My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see…
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
Halterung für Bosch GBL 18V 120
Diese Teigblume passt perfekt für den Monsieur Cuisine Smart von Lidl. Ich habe sie so gestaltet, dass man die Teigblume auch als Ständer für das Messer nach dem Spülen oder zum Lagern verwenden kann. Druckeinstellungen Druckermarke :…
Teigblume for easier dough removal on the Vorwerk Thermomix TM5. Not a original part from Vorwerk. For the Print i used the following settings: Filament: PLA, PETG Layerheight: 0.2mm Walls: 1.2mm Infill: 20%
This is a Wall mount for the Nozzle and the Bosch Professional GBL 18V-120. The device-Mount was optimized for the blower, but shoult also work fine for other leight Bosch Pro 18V-Tools, since it's attached to the base. Screw holes are…
I'm a Bosch Pro Fan. Unfortunately Bosch has no leaf blower in their Pro-Series. I've bought the GBL 18V-120 for a year ago, but these blower is not so good for blowing leaves from gras. With my adapter this is no problem anymore. I get a…
Nozzle v2 for cordless blower Bosch GBL 18V-120
I like interlocking building blocks so i combined the ability to mount those blocks with a bookend. Maybe someone likes the idea too. :) The baseplate is 12 x 12 nubs.
You can now use the vacuum. And an adapter for Coleman air bed.
See https://github.com/SMerrony/picopanel for a project using this case.
With this adapter you can connect your Bosch blower to the garden hose in order to blow out the hose or maybe you need to blow in some hidden places so a hose adapter could be useful. My first intention was to use it to blow out…
Goodman handle for my VTL3500P BigBlue dive torch. Additional material: 3x screw M3 x 15mm 3x washer M3 12x1mm 2x washer M3 10x1mm 2x injection nut M3 See my bungee mount for this torch:…
Nozzle for vinyl float. Short nozzle 25φ. Coleman Inflator Mat Nozzle.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Meet the SpringBlossom Dragon, a fully articulated, beautifully detailed model available in three versions: Adult, Teenage, and Baby!…
Slim bungee mount for my VTL3500P BigBlue dive torch. Additional material: 1x screw M3 x 15mm 1x washer M3 10x1mm 1x bungee cord 4mm See my goodman handle for this torch: https://www.prusaprinters.org/prints/33673-bigblue-goodman-handle…
Flachdüse mit Verlängerung, für Bosch Professional GBL 18V-750 Mit Verlängerung für erweiterten, breiten Luftstrom zum Reinigen großer, ebener Flächen Zum Entfernen von Laub, Schmutz und Pulverschnee in aufrechter Körperhaltung Geeignet…
BOM GBLS Magazine BB Lib ( For HP Mag) : x1 M2 Head Threaded Insert (length: 3mm, OD 3.2mm) : x9 M3 Head Threaded Insert (length: 4mm, OD 5mm) : x2 M2 x 12mm or 13mm Flat Head Screw : x6 M2 x 8mm Flat Head Screw : x2 M2 x 12mm Socket Head…
i wold recomend printing the base in petg or abs the rest u cant print in pla if you want to. i printed mine with 3 perimiters and 15% infill in petg. 0.4 nozzle added a verision that uses hexnut instead of heatsets Requierd hardware is:…
a full buildingblocks build of the iconic mustang. incl the pdf file for building
This is a 110mm wide nozzle for the Bosch GBL 18V-120 battery powered blower. I got this tool for the main purpose of drying my car after cleaning sessions. It only comes with small diameter, circular nozzle attachments which are not…
Small gift for my daughter who loves this rock star ;)
Introducing the BlingBling Box: the 3D Printed Makeup Organizer that's ready to add some sparkle to your routine. Say goodbye to cluttered makeup bags and hello to a perfectly organized world of cosmetics. With its sleek and stylish…
Zum Bosch Pro 18V Akku Gebläse GBL 18V-120 habe ich diverse Düsen aus den einschlägigen Downloadportalen heruntergeladen und gedruckt. Dann hat mir eine für mich passende Wandhalterung gefehlt. Daher habe ich unter Verwendung von…
I printed a bunch of mathgrrl's Sunburst Clocks and bought the clock mechanisms she recommended, just to discover that there's nothing included to mount them to a wall. So, after looking at a similar listing on Amazon I "reinvented" a…
I made a sanding block for my Guitarbuild and decided to make a small collection of them for all the guitar builders out there. I have made Radius for the most Common ones but if you need a different one leave a Comment. Radius are in 10,…
This adapter allows you to both fill and unload GBLS magazines using the awesome Vanguard Electric BB loader. As well as the printed parts you'll need an M3x16 hex bolt to fit the unloader wheel in place. Once fitted
This part allows you to print a replacement for the GBLS magazine loader that comes with the airsoft gun. The dimensions of the outer are a little larger than the original to allow for some wall thickness when printing, but the critical…
Just a sanding block. Nut outer size is 8mm, but change it if you need in the FreeCAD file to fit the bolt and nut you have lying around. One stl with open bottom, and one if you would like to just pause the print and drop the nut in.
Simple adapter for the odin sidewinder to load the gbls das mags tested on the stang 60rnd mag and the PTS 120rnd mags
Sanding block with a 30mm radius with a small profile that makes it easy to use in tight spaces Use 2* 20mm woodskrews
Do you love the razor hand mount, but wish that BigBlue's TL3500PS had a properly sized mount? Now you can print your own. This will probably fit any BigBlue light that has a 63mm diameter head and a goodman mount on the light head, or a…
Here are some flat nozzles for the Bosch GBL 18V blower with different orientations
From scratch re-design of @Stefa , I made a quite a few reconsideration and refinement for my design. The idea is to release the CAD files so by modifying the parameters one can make one's own goodman handle by measure. Enjoy.
Dies ist eine kleine sehr simple Burg, in dessen Türme man etwas hineingeben kann z.b. Stifte, vielleicht Pflanzen oder auch sonstige Gegenstände, wie Murmeln. This is a small very simple castle, in the towers of which you can put…
Dieses Modell sowie weitere Rührer stehen in Zusammenhang mit der Smoothie-Mission , bei der es darum geht, Schülerinnen und Schüler über Experimente aus der Küche für Verfahrenstechnik und Chemieingenieurwesen zu interessieren. Erstellt…
My daughter loves Yungblud and I wanted to create a Christmas gift that she cannot buy anywhere. If you keep the settings (especially the supports) you should not need to use multimaterial print. Powered by MakerWorld-Make My Statue (…
Holder for the accessories of the GBL 18v-120.
Um das Fangblech zu bauen braucht man 4 hauptbleche und drei inleys, einfach zusammenstecken
The Ikea Ringblomma Roman blind comes with a spring-loaded clip. This is a non-spring-loaded snap-on replacement. PLA 20% infill Arachne Wall 2 walls no supports required brim or mouse ears This needs to be printed with its side on the…
klička pro snadnější odstraňování těsta z hrnce
Zik bugbliss - Senior Cockroach Whisperer
Bosch Professional GBL 18V120 Wallmount
This is a propeller guard for the PLEGBLE PL‑516 drone. I printed it on an A1 Mini using PLA+ at a 0.1 mm layer height . It’s better to print it with tree supports.
Mit meiner Teiglüte kann das Schneidemesser von unten schmerzfrei gedreht werden und somit können eventuelle Teigreste aus der Maschine problemlos entfernt werden. Ein Must Have für alle Besitzer von Monsieur Cuisine Smart etc.Mit meiner…
I attached the native Watercraft Springblade to my kayak. If the rudder is not folded down for transport, the T-handle operating handle is loose in the boat. That's not pretty and so I drew a holder for the handle. Printed in TPU or PETG.…
I used Hueforge to create this 180 x 180 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Prusament PLA Jet Black Prusament PLA Gentleman's Grey Prusament PLA Gravity Grey Filament PLA…
Ich suchte nach einem kleinen Schleifblock der ohne Zusammenbau funktioniert und einfach zu handhaben ist. Da ich nicht wirklich fündig geworden bin, habe ich selbst einen kreiert.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Here is my design of a motor mount for the 3Dlabprint Slingblade. With this motor mount you can install a Racestar 4108 in your Slingblade. Propeller 9x6 6S / 1300 mAH LiPo ESC 40 Amp Very hot ;-)) There are two versions of the part. One…
Jetpack upgrade kit for legacy optimus prime from transformers animated Includes: Jetpack, gauntlets, the magnus hammer Glues us required for assembly Supports yes
POLY-CARBONATE BELLOWS HOUSING FOR THE GBL 3D PRINTED VENTILATOR ASSEMBLY, 1 REQUIRED! Print instructions PRINT IS BASED ON POLYMAKER POLYLITE PC FILAMENT HEATED ENCLOSURE RECOMMENDED BEST RESULTS USE MAGIGOO PC OR BUILDTAK ON THE BED…
As i like to play around with OpenSCAD i took the already great lm8 bushings from Triffid Hunter and made a block around it. Also i added a short code to fight the elefantfeet effect my and many other printers are having. Credits for the…
Voor onder de transformator voor de opslag op het terrein zodat een kraan kan tillen. Gemaakt voor mijn H0 modellen.
The adapter allows you to mount the Ringblomma curtain on a ceiling rail and extend it by 5 cm. After printing the elements, insert the hook into the block and secure it with a drop of glue. I printed the element using transparent PLA…
An adapter for the Bosch Professional GBL 18V 9.5mm x 160mm Use TPU
These building blocks are the start of an educational product to teach kids or adults critical skills in designing and building robots and other cool things. The basic concept behind this is that each building block is set up with a grid…
Beschreibung: Dieser Einflugblock wurde speziell entwickelt, um Honigbienenvölker vor Angriffen der Asiatischen Hornisse ( Vespa velutina ) zu schützen. Diese invasive Art breitet sich seit Jahren in Europa aus und übt durch ihr…
END CAP FOR GREEN BEAN LABS 3D PRINTED VENTILATOR ASSEMBLY, 2 REQUIRED! Print instructions PRINT IS BASED ON POLYMAKER POLYLITE PC FILAMENT HEATED ENCLOSURE RECOMMENDED BEST RESULTS USE MAGIGOO PC OR BUILDTAK ON THE BED SURFACE DESIGNED…
General Description To make this sword model, I used reference art from a game called “Hexaria“. The model is about the size of a DnD miniature to begin with, so I would suggest scaling the sword to fit your 3D printer. Default size ^…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
It is a thread model of KingBlade's light emitting parts, an LED light stick often used in Japan. By attaching this file to another model you want, you can make that model into the type of lightstick you want. As an example test file, I…
Beschreibung: Dieser Einflugblock wurde speziell entwickelt, um Honigbienenvölker vor Angriffen der Asiatischen Hornisse ( Vespa velutina ) zu schützen. Diese invasive Art breitet sich seit Jahren in Europa aus und übt durch ihr…
Mountingblock for a machinelight for my Wabeco F1210 Mill. For assembly I used the M10x1 thread which normally is screwed into the included magnetic block and the 2 factory drilled M8 holes in the foot of the mill. The light I bought HERE .
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
I have no design or en gineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Verhindert das Spielzeug oder auch der Saugroboter unter Möbel gelangen und dort feststecken
This is a building block. There will be more that link in with it. Scale it however big or small you want.
http://flickr.com/photos/geekubator/sets/72157629825289523/ Some of you may remember how practical the removable build platform of the Cupcake CNC was! The aim of the project is to make a build platform (here demonstrated on a MakerBot…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
This is a remix/custom of Xiaomi Aqara Wall Switch (surface-mounted wall box) for my personal need with my WiFi Thermostat Temperature Controller (BHT-002-GBLW) FR / WiFi Thermostat Temperature Controller (BHT-002-GBLW) US and maybe with…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
I needed such a Holder for my Multiboad-Tool wall, but for my Black & Decker EGBL14 electric cordless screwdriver. So I have remixed the [Einhell] Cordless Screwdrivers Holder (multiboard, HSW, screw) which was originally designed by…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Own design , inspiration from the teigblume tm5 / tm31. This is for the kitchen machine thermomix TM5 and TM31. Update for the TM31, you can shrink it 10% then it fits perfect. i will update later with an separate file for TM31 , It helps…
This is a simple cover to protect the lens and the button. Using the cover will reduce the need of unplugging the batter
Diverse bloemen en steeltjes om te rijgen op de rijgplaat. Leuke activiteit om de fijne motoriek te oefenen en/of te werken rond wiskundige vaardigheden en taal. De bloemen moeten geprint worden met supports als je ze rechtop wil printen.
Tubeholder for GBL18v-750/800
This is a 10 cm in diameter coaster with the artist YungBluds logo YB in carachteristic colors. Made for multicolor printing as with CFS, AMS, MMU. Take care
To build one holder, you'll need: 1x Pressfit insert M3 x 5 x 4 1x M3 Screw 2,5 cm wide adhesive tape e.g. 3m or Art3d Tools: Soldering iron Print in matching windowsill color for better wife approval factor.
Allows for 4mm M5 heatset inserts with 7mm OD to replace the imperial nut situation. Chamfers made to ensure no surplus plastic in the barrel area. STEP and STL Included. I used 8mm M5 screws with a washer at each screw to ensure no…
Mit meiner Teiglüte kann das Schneidemesser von unten schmerzfrei gedreht werden und somit können eventuelle Teigreste aus der Maschine problemlos entfernt werden. Ein Must Have für alle Besitzer von Monsieur Cuisine Smart etc.Mit meiner…
I needed such a Holder for my Multiboad-Tool wall, but for my Black & Decker EGBL14 electric cordless screwdriver. So I have remixed the [Einhell] Cordless Screwdrivers Holder (multiboard, HSW, screw) which was originally designed by…
An adapter for the Bosch Professional GBL 18V 9.5mm x 160mm Use TPU
To really super charge our new Animated Optimus Prime, let's zap in his Wingblade upgrade kit! This armor and wings add on kit really helps to give Prime a bulkier and souped-up look, what with his new wings for flight and beefed up hands…
Meet the SpringBlossom Dragon, a fully articulated, beautifully detailed model available in three versions: Adult, Teenage, and Baby! Inspired by the fresh bloom of spring, this dragon is adorned with intricate flowers and leaf-like…
Meet the SpringBlossom Dragon, a fully articulated, beautifully detailed model available in three versions: Adult, Teenage, and Baby! Inspired by the fresh bloom of spring, this dragon is adorned with intricate flowers and leaf-like…
