Counting matching models…
This version adds all the improvements in V2 ( https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support ) Assembly instructions, apart from the added fasteners are all the same for this version, and is…
EggBot - patterns, lines & samples - collection Hey folks, Here are a few patterns, lines and examples to paint eggs with an EggBot, SphereBot or Eggduino. The templates were created with Illustrator and have a resolution of 3200 x 800…
Here are the files for my EggBox, this is a print in lace close able Egg Shaped box, that is just perfect for filling full of the treat of your choice. i have included the files combined for use with a single extruder, and the separate…
Eggbeater Drill - fully 3d printed - no supports. This was my first version of the tool, I've had two more iterations since: https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support…
Äggbot – The Minimalist & Futuristic Egg Cup Where simplicity meets innovation. The Äggbot is a modern, tech-inspired egg cup designed for those who appreciate clean aesthetics and smart functionality. Its sleek, geometric form makes it a…
Eggbeater Drill - fully 3d printed - no supports. Assembly instruction video here: https://youtu.be/LRMtJGYOVTI Just a demo of it in action here: This new version has an added idler gear, which allows for a bit more torque than the…
this are mummy mags for in GGB airsoft pistols. in case you like to practice some dry fire skills like reloads, drawing, presenting, and actually dry firing. with out a risk of making a lot of noice, or excellently firing a BB. I also…
This is a template to print an zipper onto a egg. Print instructions Category: 2D Art Summary This is a template to print an zipper onto a egg.
Print the “Generic Game Board” (GGB) and you can play lots of games with it. The GGB is ideal for travel, as the integrated game pieces won't fall off if you tilt or bump the board. The integrated pieces means there is no pack up required…
This is a series of mods that I created for the JJRobots version of the EggBot. I started with the remix of the base that allowed for the vertical adjustment of the servo arm - https://www.thingiverse.com/thing:2120339 . From there, I…
this are mummy mags for in GGB airsoft pistols. in case you like to practice some dry fire skills like reloads, drawing, presenting, and actually dry firing. with out a risk of making a lot of noise, or excellently firing a BB. the Pmag…
Remix der phantastischen Ostereierdekorations-Maschine von Herbert_b1. Hier findet Ihr nur die geänderten Teile, alles andere beim Original !! https://www.thingiverse.com/thing:3431363 Geändert wurde die Montageplatte vom Stiftantrieb,…
this mac cover is slightly modded because the the 50 round mags are longer then the original stingray mags. but it should still give you the same look and feel over all. mag compatibility this models for a WE Tech G18 mag (50 round mag)…
NOTE: This is a work in progress and may change over time. Remix Changes: De-themed, removed all easter "badging" (nothing against easter) Passive cooling, removed fan mount and replaced with large vents Expanded stepper motor cable…
Update: 28 Oct 2019 haarp's comment made me realize that although I had remodeled this thing with a T30 torx interface, I had never posted it, so I'm including it now. The flat screwdriver interface wasn't great, and hex was worse, but I…
A one line rabbit, designed by me.
The new IKEA 'Myggbett' sensor. You can use this 3D template to help make other 3D files such as mounts, skins or brackets. In photo: White is real sensor, yellow is the PLA print. Small edit: Added the area for the sensor's light 20-12-25
this are dummy mags for in the GGB FGC-6 airsoft replicas. in case you like to practice some dry fire skills like reloads, drawing, presenting, and actually dry firing. with out a risk of making a lot of noise, or excellently firing a BB.…
I need a 1cm spacer to that my Myggbett sensor fit my door. With the door closed, the sensor element is too far away from the other part to be recognized. The height can be adjusted in the spreadsheet using FreeCAD.
Here you have the cutest bunny for your easter decoration. Bun-Bun will be the favorite on your easter hunting. you can decorate any space you want or even give it to your kids as a price or special item in their easter hunting. The model…
EggBot is a machine that can draw anything you want on an egg. It's a great introduction to CNC machining and a relatively inexpensive project to build. And it's a lot of fun once it finally works. More info in the video: The list of…
A little Knob for the Pen-Holder of the Spherebot / Egg-Bot: https://www.thingiverse.com/thing:1683764 Requires a M3 Nut and a M3 Skrew (needed anyway for the Egg-Bot). The Knob needs some space, so I used a little longer skrew. But the…
IKEA Mygbett sensor for a tilting garage door. It opens under gravity when the door is open. Use M4 screws to make the axle for the rotating sensor support.
You can watch a drawing here: https://youtu.be/KiS0o3kpmoQ
This is BitBeam version of ball plotter, knows as EggBot. Print is still in progress now. Printed files 1 x bb-adp-ball-30.stl 1 x bb-adp-ball-40.stl 1 x bb-adp-shaft-8.stl 2 x bb-adp-stp-5x3-th.stl 2 x bb-a90-2x4.stl 1 x bb-a90-2x5.stl 3…
Der IKEA MYGGBETT Kontaktsensor ist mit dem mitgelieferten Klebepad und dem Magneten einfach zu dick, um ihn im Fensterrahmen zu montieren. Der Halter lässt sich in den Fensterrahmen kleben. Man braucht das dicke Klebepad von Ikea nicht.…
Here is the model for Eggburt Bear. Eggburt is a good Friend of Barry, and Just like Barry would like to be your friend too, do you have space for Eggburt Bear? maybe he can keep Barry Company. I hope you enjoy, Thanks Bugman If you like…
Použití laser modulu 1W pro vytváření obrázků na vajíčka pomocí EggBotu. Úprava je řešena jako jednoduchý doplněk stávajícího stroje EggBot. Stačí vytisknout díl ruka_laser.stl pro uchycení laser modulu na původní rameno. Pro toto použití…
A template to engrave tee light glasses or christmas tree balls.
This is my remix of herbert_b1's EggBot. The main change is that on the main body, the pen holder has been removed and replaced with a modular box. Now you can use the Eggbot without a side box or with any you want. I designed three…
a remix of Trigubovich's EggBot and schuetzi99's remix of it thrown together with a few own parts to form the easterhegg 2023 edition (aka eh20) in Hamburg Print every file once, except for the arduino spacers - you will need four of…
DEUTSCH: Hallo Füchse, wir hoffen, dass es euch allen gut geht und ihr euren Uncl0ggbuddy in vollen Zügen genießt! Wir haben eine STL-Datei erstellt, mit der ihr eurem Uncl0ggbuddy eine Sicherheitskappe verleihen könnt. Ihr könnt nun eure…
These thing makes the "eggbot redrawn" ready to clamp beer glasses for engraving them. I also changed the engraver mount of original “eggbot redrawn”, because I guess, there should be more possibility to swing. For the same reason, there…
Model je vygenerován pomocí AI. Třeba udělá radost při oslavě Velikonoc :-)
This allows you to put your Ikea MYGGBETT sensor into a bag and drop it in this print to enable outdoor use. The included lid is designed to keep rain out. Put the sensor in a bag (bag needs to be tight to the sensor to have clearance)…
I liked the redrawn eggbot but had a minor issue with the pen arm and couldn't make the spring work with my servo. Instead I just went back to the original eggbot design and let gravity do the work. I did this by just taping over the hole…
A simple print in place hinge to use the Ikea Myggbett door/window sensor as a garage door sensor. Other than a couple strips of double sided tape, no extra hardware is required. The sensor clips onto the hinge, so the original base is no…
This was originally made by Leo136_6, so props to them!
Kids Art - Eggy Eggbert 3D printable model.
90T MXL Pulley w/ 4mm shaft diameter for Makeblock eggbot (and other Makeblock bots) Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627…
Nachdem der Eggbot nun läuft, musste ich feststellen, das der "Druck" ziemlich zittrig ist. Erste Vermutung war, das die Mechanik "schwingt". Bei näherer Untersuchung kamen nun die Motortreiber in betracht. Also Lösung gesucht und…
Tastengehäuse zum manuellen Steuern von Funktionen am Eggbot: Druck pausieren, z.b. zum Stiftwechsel etc. kann dann in der Inkscape Eggbot Erweiterung wieder gestartet oder aber mit Homing abgebrochen werden. Stift heben oder senken, das…
A parametric spacer for the IKEA Myggbett. min is 2.5 as that is how big the clip is
This is a sensor mount for Ikea's new Matter compatible Mygbett door/window sensor in combination with Hörmann overhead doors. It fits both my doors - even though they are different and 17 year apart in production. The existing two holes…
I have found that the IKEA MYGGBETT sensor isn't tall enough to line up with some of my doors (front and back door) so i've created a extension peice which clips in inbetween the sensor (battery side) and the part with the attached 3M…
90T MXL Pulley w/ 5mm shaft diameter for Makeblock eggbot (and other Makeblock bots) Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627…
This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the long small side (see photo, holes open on top) with only…
[PL] śmieszny model wielkanocnego Bulbasaura [EN] A funny Easter Bulbasaur model
Verkleinerter Eierhalter für 626ZZ Lager. Durch den kleineren Durchmesser lässt sich der Druckbereich minimal vergrößern. Außerdem scheint das Lager leiser zu laufen, kann auch Einbildung sein. Der O-Ringhalter ist angepasst auf 19 x 2,5…
Das sind zwei Gummiringe die sich an der EggBot-Achse befestigen lassen, damit sich das Ei beim bedrucken nicht mitdreht. Natürlich kann man auch eine normale Gummidichtung verwenden, aber man ist ja Maker :-) Schichtdicke: 0,15-0,25 mm…
I have been using the silicone molds for Egg Painter Mini posted by @ANicolai but I noticed that the marker hits the edge of the larger pad when it gets close to that end. To solve that problem, I trimmed the edge of the pad down at an…
This eggbeater antenna design uses 1/2" x 1/8" aluminum that you can find at Home Depot or similar stores. It is designed for the UHF satellite band (~437mhz). The mesh for the reflector is optional but is supposed to improve performance.…
This is a small modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. I printed it on the big flat side and added suppot on the T-parts. More modular boxes…
This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the big flat side with only suppot added on the T-parts. More…
Hab den Arm so geändert dass man Kugellager mit 3x9x4mm nutzen kann. Dadurch ist das Gelenk sehr leichtgängig jedoch der Stift immer genau auf Position (kein hin und herwackeln wie ohne Kugellager) - Schrift und Zeichnung wird eindeutig…
Die Abdeckschicht der Symbole wurde in einer neuen Farbe gedruckt.
3DP XL Spherebot Fully 3D printed (bolt and/or glue together) Extra Large Eggbot/Spherebot Files for a standard size version are included. 5mm and 4mm shaft options...comment below if you desire a different shaft diameter for the driver…
This model allows you to mount an Ikea Myggbett sensor in a 6cm deep 16mm hole. It uses an N/LR1 battery, and the strip for the negative terminal must be shortened and bent to fit. Requires a 6x9mm (or 3 6x3mm) round neodymium magnet. The…
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
No supports needed. Just an object of my free time. Happy printing
This is a re-design of the https://www.thingiverse.com/thing:2422393 Eggbot arm, to allow to draw on Eggs. In order to draw on non-spherical objects, you have to set the point of rotation lower than the center of the Egg. This design has…
This is a holder for Christmas balls to use with the original Eggbot with the precision Egg Coupler. (https://shop.evilmadscientist.com/productsmenu/208) Used data … Diameter of balls: 56mm Diameter/deeps with the coupler: 23mm/10mm…
to not cause any confusion but the top part of the model DOES NOT COME CONNECTED. So pls modify it as much as you want but recommended that you find a way to add a hinge to the top. Another thing, it is not recommended to print in place.…
little minifig for desk also paper weight
I use this to take my daily egg with me to work in this.
Der IKEA MYGGBETT Kontaktsensor ist mit dem mitgelieferten Klebepad und dem Magneten einfach zu dick, um ihn im Fensterrahmen zu montieren. Der Halter lässt sich in den Fensterrahmen kleben. Man braucht das dicke Klebepad von Ikea nicht.…
A parametric spacer for the IKEA Myggbett. min is 2.5 as that is how big the clip is
A simple print in place hinge to use the Ikea Myggbett door/window sensor as a garage door sensor. Other than a couple strips of double sided tape, no extra hardware is required. The sensor clips onto the hinge, so the original base is no…
Want it printed for you? Buy the print here: https://chris3dprintsstuff.etsy.com/uk/listing/1868743001/ikea-parasollmyggbett-zigbee-door-window --------------------------------------------------------- Most Zigbee/Matter sensors are not…
EGGBO | Chessboard print-in-place Meet EGGBO, a print-in-place foldable chessboard. No assembly required. It was designed to be printed folded and upright for 2 reasons: 1- Fast printing , as the first layer surface is very small, and…
This 3D print allows you to replace the fixed egg-axis of the Sphere-o-Bot (eggbot) with an easily adjustable mechanism, which makes it possible to adjust the distance between the suction cups, so that different sized eggs/objects can be…
![[EN] Eggbasaur [PL] Pisankosaur](https://media.printables.com/media/prints/82c8c993-112b-4f48-bfc9-c407885e76cf/images/12441001_5bdaf404-582b-408a-98b9-b69e2c8ad8e4_3c8aaaae-ddb4-4ee7-8774-c1ef0e8e3116/obraz_2026-03-29_221723357.png)
