74 models
Inspired by a hole lot of box systems, I wanted to design a storage system with no frills, wich is easy and fast to print on my Prusa Mini and fits on my Skadis pegboard. I came out with this. I use it to organize my 3D printing…
If you can print 252mm long, you can print the 6-grid-version. If you have less print capabilities or definitely want the 5-grid-version, use this. Slider and Pin fit both. At 3.8mm or adequate (depending on your layerheight) you may…
This is a Fusion template for creating stacked gridfinity grids. These grids are symmetrical top-to-bottom, so they stack easily. Use Modify→Change Parameters to change the size of the grid and the number to stack. Grids are stacked with…
My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…
For storing and organizing/reorganizing very small hardware, example m2 thru m6 nuts screws washers from sets. Great if you are constantly adding new sizes and types because the double or 5x boxes are a hassle to reorganize if you add one…
Stacked Gridfinity Grids with modeled support
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
My remix of https://www.printables.com/cs/model/29030-customizable-board-game-carcassonne-tile-grids Thinner - low material, still stable, faster print.
PC fan grids for 140mm fans 3 styles: hexagon hexagon 2 sun
In Hueforge one important function is the Transmission Distance of your filament.THis test grid will help you determine the TD for each of your filaments. Be sure to use a layer height of 0.08mm and 100% infill. Start with white filament…
---Zur deutschen Beschreibung geht's weiter unten!--- Gameboy cartridge stand - fully customizable! I was looking for a stand for my beloved Gameboy cartridges . Here I came across Liartes' work, which I based myself on. When I went to…
GridSystem is a modular platform to create computer cases of various sizes (including ITX, mATX and ATX). The platform offer great flexibility and is designed with future expansions in mind. It is the second iteration of my GridCase…
HyPar gridshell through active bending. The geometry of the HyPar gridshell is generated by inscribed modulation of junction slots. The fabrication process produces flat PLA stripes. During assembly they have to be elastically bent in…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
Made a Hagrids Hut Diorama for the Nerd themed living room. The Model can beprinted in both FDM and SLA. Printed the hut itself in FDM, the Pumpkins and stuff on SLA. For the roof i used some Sandpaper, cut to little shindles, the smoke…
Ich habe in der .3MF Version ein Textfeld hinzugefügt. Vor dem Druck bitte hier Text bearbeiten (unter Objekte) anklicken und die Filamentbezeichnung (oder eine eigene) eintragen. Die Ausdrucke können so besser Archiviert werden.
I thought the available shaker boxes were a bit steep pricewise and also very crammed for my big fingers. It started with the idea of a somewhat wider grid for convinience and escalated from there into a modular box system when I figured…
This is a lamp made of grids.
Modell von Hagrids Hütte aus Harry Potter Teil 3 “Harry Potter und der Gefangene von Askaban”. Das Modell zeigt die Szene aus Teil 3 der Harry Potter Filme, kurz vor der Hinrichtung Seidenschnabels. Durch die detaillierte Gestaltung der…
Small grids are super useful for organizing stuff in moving boxes, closets, cabinets, drawers and so on. But 3d printing big ones would take a lot of time and filament, and require you to have a huge printer. Luckily cardboard exists and…
Cryo gridbox with custom screw and a pin-type lid. Fits 4 FEI Autogrids (and bare grids as well, but they have some wiggle room), positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position…
I love the idea of @Clough42 's Gridfinity Grids - Stacked for Printing , but there wasn't much info on how to actually get the printer to do the thing, and I was initially faced with some issues. Comments on that model showed that other…
Grid with 2x2mm holes for the bottom of plant pots, when the holes are to big for the earth or sand. I uploaded some sizes I already used.
As mentioned above don't use the remix as stand alone model but use it to connect already printed parts Thanks to Edwin Eefting @EdwinEefting_24240 Xander @Xander_424401 You can customize…
This is a simple, interlocking card grid designed to neatly organize the "shipyard" and "colony" cards for the game Space Base. Unlike nearly all of my other game models, this one does NOT support sleeved cards. These can be used by…
Aeration grid for hanse588 - replacing the plastimo ones that are very fragile. To be printed in PETG of the color you prefer…i include also the scad file for other customisations.
Print 2x for the full lid. Bolt whatever you want to it.
A Majestic Highlands XL Grid compatible to a 6x6 one with magnets.
Cryo gridbox with custom screw and a pin-type lid. Fits 4 bare TEM grids, positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position directly on the platform with no pad or supports. Lids are…
5x1 through 5x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
4x1 through 4x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on…
I recommend using a brim to ensure good adhesion
3x1 through 3x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
I made a simple box with cover for Carcassonne tile grids from @Kaxna. Original model can be found here: https://www.printables.com/model/292386-carcassonnekarak-tile-grids-and-holder/comments/1773778 I made two versions. Box for 10 pcs…
2x1 through 2x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
6x1 through 6x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
Have designed this protective grid for an inverter (with a standard 40mm fan) that is mounted outside. The slots are 2mm wide and offer by the large surface and distance to the fan the effect that no insects are sucked in, and yet no…
This is a simple snap-on grille for a Gridseed 5-chip "orb" miner. Protect your fingers from those spinning razors that Innosilicon calls "fans" :P Print instructions Licence: Creative Commons - Attribution - Non-Commercial - Share Alike…
Original design of a standard SEM cryo grid holder. Holds seven pieces. Tested printed in PLA, 100% infill, 0.2mm nozzle. Should work with SLA as well. Category: Physics & Astronomy
Hi! Have you printed out a bunch of card grids for games like Carcassonne, Karak or Isle of Skye and now you're wondering how to keep them from getting lost? Try printing out this stand for them, which has a screw-on cap so the grids…
My family loves to play the game we call "boxes" where you have a grid of dots and then each player takes a turn drawing a line orthogonaly between the dots. Whenever you finish a box you put your initial in it and get to go again.…
Hey! 👋 This is the first release of GridSmith — a modular, snap-fit TTRPG terrain system designed to actually work at the table. Why GridSmith? I’ve printed and used a lot of terrain systems over the years, and kept running into the same…
Clips to hold magnets to keep a wire grid held onto a vertical surface. Intended to use for a climbing surface for plants on the back of an Ikea Rudsta cabinet. The clips hold the grid firmly to the back of the cabinet, the grids would…
This is a snap-fit 2-part frame designed for hanging theater playbills. It is sized for NY Broadway playbills, taking into account small variations. The backplate is designed and tested to snap fit into the frame without any scale…
Use these to represent monster in combat, while using epic descriptions to fuel player imagination! You can print them a variety of colours, to more easily keep track of individuals. Also includes "_Reduced" versions that are slightly…
Stl file for printing Oven column vent grilles, hole diameter 43.6 mm
For the newer Tool-Check PLUS Set without the belt clip (Code Nr.: 05 056490 001) Print it from PLA, 2 or 3 walls with atleast 20% infill.
An assortment of Gridfinity bases in various sizes and two styles. The light grids are better if you want to join two or more grids together as this allows the trays to overlap the joint.
This vase features a high-detail fishnet mesh pattern wrapped around a smooth, curved form. The woven geometry creates an organic surface that prints cleanly and looks stunning in metallic or silk filaments. Designed for standard printing…
Hey! 👋 This is the first release of GridSmith — a modular, snap-fit TTRPG terrain system designed to actually work at the table. Why GridSmith? I’ve printed and used a lot of terrain systems over the years, and kept running into the same…
Cryo gridbox with custom screw and a pin-type lid. Fits 4 bare TEM grids, positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position directly on the platform with no pad or supports. Lids are…
Cryo gridbox with custom screw and a pin-type lid. Fits 4 FEI Autogrids (and bare grids as well, but they have some wiggle room), positions are marked with dots. Suitable for SLA printing. Gridboxes can be printed in upright position…
An assortment of Gridfinity bases in various sizes and two styles. The light grids are better if you want to join two or more grids together as this allows the trays to overlap the joint.
This modular storage system is designed for simplicity and versatility, making it an ideal solution for organizing items on a shelf, desk, or workspace. Featuring a stackable design (with all units based on the same 11cm x 110cm size), it…
The GridSort Storage Basket is designed to provide an easy and organized solution for everyday storage needs. Its grid structure maximizes ventilation and visibility, allowing you to keep your items neatly separated and easy to access.…
This vase features a high-detail fishnet mesh pattern wrapped around a smooth, curved form. The woven geometry creates an organic surface that prints cleanly and looks stunning in metallic or silk filaments. Designed for standard printing…
Corrected thin interior grids to stop unnecessary retracts. Model now slices with clean, continuous perimeters.
This is a parametric storage system for trading card games , designed in OpenSCAD. Instead of downloading a fixed STL, you open the .scad file, type in how many cards each of your decks has, and the whole system generates itself:…
Spacer for drying grids. I've made two different heights: 5cm and 10cm. The distance between the grids on top and bottom are 25mm. The diameter of the rods 4mm. I used PETG for better disinfection.
The Stanley bins have little feet that fit into intentions in the floor of the case, but it was not practical to recreate them, so I designed a grid that sits on the bottom and keeps the bins aligned. I had to redesign the bins a little…
This Door Stopper was made for a Door that has to be kept securely open. A Stairway with a Grid Floor was used as a benefit to securely anchor the Door Stopper. Its printed Concentric to further improve the stability. Additionally I added…
I wanted a contrasting border around the HSW walls on the Hex-a-Hub riser so rather than try to use the paint tool in Bambu Studio, I created these alternate panels in Onshape with the border and hex grid as discrete objects so I could…
This is a pretty basic insert for the base version of the game Space Base. It was designed to hold 5 of my player boards [ https://www.printables.com/model/754371 ] and a full set of card grids [ https://www.printables.com/model/754374 ].…
This is a peg for hanging items on a songmic wire grid. I use them to hang pins and keychains in artist alleys at events. Recommended material: PETG because it's a bit flexible and can hold some weight the fit might be tight depending on…
