Counting matching models…
A round container which can be fully customized by parameters in Fusion (360). Variations: Round Container 01 - Knurled Available parameters: Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK ,…
Remixed Ram Base with better -123 o-ring groove geometry so it prints nicer vertically. Changelog: 4-20-2025: Added STEP and F3D source files for CAD users.
Hey, today only a small upgrade. I didnt like the loose "handle" for the Calibration pin, so i designed one with better grip and pressfit. The new one has a nice pressfit, just enough to not get loose. Also i gave it groove for more…
According to a user's request from the comments, I made three size version (the photo shows the “large_spoon_size_kitchen_utensil_holder_with_anti-sliding_grooves_64mm_between_posts_center”-size. There are also versions with…
4 3/4 inch Plant Pot with Drip tray(optional) inspired by mid century design Example printed in PLA 15% infill and supports, fuzzy skin for added texture. Alternate design with no drainage holes in you want to use with nursery pot insert.
A more versatile alternative to the classic fischertechnik building block 15/Baustein 15 . This idea has been around for some while and others have realized it before . However there's no version on thingiverse yet, so here's my version.…
A knob for Prusa Mk3 series 3D printers. No wings on the knob. There are spiral grooves on the surface, which also has been inclined to allow better grip on the knob.
Ring with Geometric Grooves - Ring is designed in size T - which is 21mm diameter. I printed this using the following Layer Height : 0.1 Temp : 205c Bed Temp : 60c 3 layers on Parameter 3 Layers on Top and Bottom 75% Infill
Spindles, nuts threaded inserts fitting TR8x8 4 grooved systems. Primarily intended for use in the further modeling process.
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
As the name implies, another vise soft jaw design, but for 125mm, including v-grooves. There's holes to insert d4x12.5mm supermagnets for easy clamping. The hight of the standard vise jaw of my vise is 20mm, so the softjaw is made to fit…
This is a remix of @2vid's VX4 Pro remote case, intended to be printed out of rigid material (PETG, ASA, ABS, PLA etc.). There are two halves and are joined using (3) screws. The screws I designed it for are from McMaster-Carr and are…
This model is compatible with the lego system.
Be aware that this grip is designed for ergonomics for a specific hand size. Feels comfortable to me, but might be less good on smaller/bigger hands. Also : This grip is just a version of the ergonomic grip with less aggressive finger…
So, a friend sent me a part to print for his kid's Paw Patrol Firetruck, but for some reason, we just couldn’t get it to fit right. After a few failed prints, I thought, "Why not just design my own?" I fired up Fusion360 and, thankfully,…
I really liked the bed levelling thumb wheel with locking clip by Big E , but thought that it could do with a few more grooves for extra resolution when levelling. I also really like the look of the extra grooves. The clip is the same as…
first pic is with a zip tie to keep the cover on and protect against getting knocked off. I also have a pic of it with a ranger band which i prefer more. It keeps it tight, helps keep more dirt out generally looks neater.
Spatula for even distribution of adhesive - smaler version for corner Groove-wide = 1 mm
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle using PLA filament. No supports needed.
Title: Support or vase with grooves This vase was designed to bring charm and beauty in the best possible way to your home. Its creative design, combined with the minimalist style, allows printing in different colors. Created to be a Dulf…
Spatula for even distribution of adhesive Wide = 60 mm Groove-wide = 1 mm
I needed to convert three doors into sliding doors for a wardrobe. This included routing a slot down the middle of the bottom of the doors for the guide, which helped the doors slide evenly. Since I had the door thickness I designed this…
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
Vase with grooves, as decoration or more
So, I loved the original, but I wanted a spot to hand my needle nose pliers, and the Allen keys always move around and seem like they are trying to keep you from grabbing them. So duplicated the hanger for the snips and added it to the…
Material use was black PETG. Strength setting Orca Slicer: Top shell layers: 4 layers Top/Bottom solid infill/wallover lap 25% Support setting Orca Slicer: Type: Tree (auto) Style: Organic Top Z distance/Bottom Z distance 0.28 mm Requires…
I recut the post to fit my keyboard better. If the original is too tight, you might try this.
I was pretty amazed by the initial model and got addicted immediately - however, I was unhappy with how smooth the narrow sides were. So I added some grooves there, to get another haptic and make it easier to rotate them sideways. Magnets…
Changelog: 2020-01-31: Added variants with only one peg. The fischertechnik groove and peg connections are sometimes too loose, due to inaccuracies in 3D-printed parts or wear of the original parts. This washer will result in a tighter…
For another model, I need the ability to lock the rotation of Lazy Susan. Therefore, I have added lock grooves to the bottom. You can download the other necessary parts from the original . Printing information Layer height: 0.20mm…
Pulley diameter: 52mm, diameter of the hole: 5mm, overall width: 17.8 mm, distance from tooth to tooth: 1.6mm
Modified the wheels to have deeper grooves so the string won't fall off when setting it up and during operation.
I've modified the spoolholder slightly and added grooves specifically designed for PTFE tubes, resulting in even less resistance. The grooves have a diameter of 4.3mm. For easier installation, please cut an M3 thread into the holes. Happy…
This model is compatible with the lego system.
new model on riser lid for K1 Max. Here you only fit 3mm thick acrylic sheets in the grooves. The dimensions of the acrylic sheets are 305x39mm
Pipe adapter to fit hoses with 10 mm and about 20 mm together. Printed using PETG (outdoor use), 0,10 mm, 15 % infill
3D printed child with grooves (collapsible model). This and other 3d models - on the 3d printing website
Pulley diameter: 28mm, diameter of the hole: 5.8mm, overall width: 32.8 mm, distance from tooth to tooth: 1.6mm, diameter square hole: 14x14mm, the depth of the hole:15mm
LED Remote holder with added grooves to fit most small LED remotes. I recommend the upright model with brim and organic supports (those printed the best for me).
Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…
easy to print, no supports needed
NORDIC GROOVES VASE is a modern, minimalist home decor piece inspired by clean Scandinavian interior design. Featuring an elegant vertical fluted texture and a soft neck contour, it adds a sophisticated architectural touch to any living…
Doll clothes hanger with groove and middle opening with lock mechanism 👕 Description: This is a hanger for small sized clothes like doll's clothes like Labubu homemade clothes (my use case). It has 2 wide grooves to fit the epaulettes on…
Read summary, not much work done aside from removing the grooves, felt the grooves add friction to the darts hence removed them for smoother firing
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A classic coffin shape, narrow at the head, wide at the shoulders, with plank grooves round the sides and a lift-off lid with R.I.P., a cross and a border cut into the top. Fill it with Halloween sweets, rings or dice, or give it as a…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Cubes in 1cm increments, with sub-cubes separated by a line or groove so the size in cubic centimeters can be easily visualized. I printed these with 3 surface walls and 5-10% infill, gyroid works well but linear or triangles suffice to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Cut even slices from a homemade loaf every time. The loaf sits between two slotted walls and the bread knife runs down the slots, so every slice comes out the same thickness. Grooves in the base catch the crumbs. Choose the slice…
Hexagonal pen and pencil cup, 80 mm across flats, with decorative vertical grooves and a chamfered rim. 80 mm across flats, 100 mm tall 2 vertical grooves on each face Chamfered top rim Print settings A1 mini, 0.20 mm, PLA: 2 h 2 min (73…
A solid door wedge that actually stays put. Slide the thin nose under the door and the door holds it in place. Anti-slip grooves : 90° V-grooves across the bottom (1 mm deep, 4 mm pitch). Their edges grip carpet, rugs and laminate, so the…
Eight little rests to keep chopstick tips off the table: two each of a fish, a leaf, a cloud and a dog bone. A shallow groove across the middle cradles the chopsticks; they also work for a knife, a pen or a paintbrush. DETAILS • 48 mm…
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…
This is a remix of @2vid's VX4 Pro remote case, intended to be printed out of rigid material (PETG, ASA, ABS, PLA etc.). There are two halves and are joined using (3) screws. The screws I designed it for are from McMaster-Carr and are…
Title: Support or vase with grooves This vase was designed to bring charm and beauty in the best possible way to your home. Its creative design, combined with the minimalist style, allows printing in different colors. Created to be a Dulf…
![[OETS] Trapezoidal Spindle standard parts TR8x8 4 grooves](https://media.printables.com/media/prints/1208965/images/9077602_d2773ff5-45d3-4cfd-ae6e-3184a99443cc_992f56be-1c9e-485c-b2cd-bb5ace0b8d2b/ff971991-b628-453e-af03-db08bab7bc1d.png)
