Counting matching models…
Hi, this project is a beta test because i have not received my printer yet, so give me advices for the mode Need tree spings, one for the trigger that is a compression spring 4,5 mm DIA by 10mm long, one for reload activation system 4,5…
Elevate your AceXR experience with this professionally engineered Glock 17 Generation 5 shell, featuring a fully overhauled and stress-tested Fire Control Unit (FCU). While the original concept was a great starting point, this version has…
About 1mm off from a G19 grip, could use some cleaning up but its functional and looks good enough! used for gaming purposes only. Added .3mf file for Bambu users and .stl as well.
DWX grip (Shadow 2) for Ace VR. Barrel/Slide is generic 2011 slide but it is close to the DWX. Could be remixed/cleaned up to be more accurate, but I just wanted something close for a fellow ACE VR user. THIS DOES NOT REPLACE THE ACE FCU…
Update: the main clip can flex a little bit if you have the holster riding high. Putting a dab of CA or super glue between the clip and holster once you're happy with it will fix this. I wanted a holster option for my Ace XR MR920…
I have an Icom IC-2730A, which uses an HM-207 mic. I had already created a nicer hanger for my Yaesu mic, but this one has a molded-in “bar” in which you are supposed to hang it from. Being cheap and thin sheet metal, I'm not one to use…
Ochranný kryt pro handsety rebretheru Liberty fy Divesoft. Materiál PETG, 100% výplň, bez podpěr.
I have a couple Yaesu radios, which use an MH-31 and MH-48 mic. The original hanger is cheap and thin sheet metal, which easily bends, so I created this holder. I believe I made this for #8 wood screws, due to naming the model the way I…
Remix of the original design by ryaninc to allow the piece to be used either with the tab facing up (if the phone is wall mounted) or the tab facing down inside the phone body (If the phone is just standing on a desk). Printed it on my…
This is a bracket to wall mount a Gigaset S650H DECT charging base (it might fit others). We've a number of these dotted around the office and workshop and while you can use a couple of screws to mount this with the 'keyholes' in the back…
Use your material of choice. I'd probably recommend PETG or ABS if you live in a hot climate. Intention is for it to be mounted with an adhesive tape such as 3M VHB tape. Print Settings Printer: Creatbot DE Plus Rafts: Doesn't Matter…
Where I mounted my clip, on the passenger side (right hand side driver) of the centre console, was convenient to grab, but leaves the handset display facing slightly away from the driver. This model turns the handset towards the driver…
You can use 6 each Ø6x4 mm magnets or 3d printet pins if you will assembly it permanent. I would prefer to glue (gluegun) the earbuds and mic in, so it's not rattle around. The STL file has to be mirrored X or Y for second parts.
Lanyard ring for DJI drone controllers
In Australia, a common type of phone was the Telecom TF200 (of the T200 series). Other names for phones of this type are Telecom Touchfone, Telstra Touchfone and Telstra T400. If you wanted to stick it to a wall, there was a wall mounting…
Jednoduchý kĺbový záves slúchadla na Lamax Base 1/ Simple joint handset hinge on Lamax Base 1
Modeled to contour to a Cisco 8800 series handset. I use the smallest size Ranger Band, cut into thirds, to attach it to the phone. Depending on the size of the push-to-talk button, I've included 2 versions of the button insert.
Ever lost that tiny plastic clip that holds your handset in place, only to find out you have to buy a whole new phone to replace it? This model is a functional 1:1 replacement designed specifically for Fanvil X-Series IP phones . Overview…
Elevate your VR setup with our 3D model - an Oculus Rift VR Handset bracket, converting wall mount to desk mount convenience. Enjoy immersive experiences while keeping your handset secure and within reach. Maximize your gaming space and…
Ideal Standard shower handset bracket
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cuEFDUfRdSc Category: 3D Printing
Simple Wall bracket to hang the Oculus Rift Headset and hand controllers Category: Computer
This model gives you somewhere to hang your batteries and controller for the Sky Watcher EQ3-2 dual axis motor drive. It hangs on the leg of the standard square section aluminium tripod, which comes with the mount. Easy access to the…
it's the holder for the phone handset siemens euroset 2005 first version
I made this to replace the handset holder on my VGO2007 model faucet. Its not symeterical so I put a dot on the bottom as its tapered. I suggest a test fit with the handset before installing it. I made this with ABS. Category: Hobby
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7sAzMg7hGiH Category: 3D Printing
shower handset holder replacement for standard round models, outer diameter: 40mm
DWX grip (Shadow 2) for Ace VR. Barrel/Slide is generic 2011 slide but it is close to the DWX. Could be remixed/cleaned up to be more accurate, but I just wanted something close for a fellow ACE VR user. THIS DOES NOT REPLACE THE ACE FCU…
This model gives you somewhere to hang your batteries and controller for the Sky Watcher EQ3-2 dual axis motor drive. It hangs on the leg of the standard square section aluminium tripod, which comes with the mount. Easy access to the…
Hi, this project is a beta test because i have not received my printer yet, so give me advices for the mode Need tree spings, one for the trigger that is a compression spring 4,5 mm DIA by 10mm long, one for reload activation system 4,5…
Pins for the model from Camille COSSA @CamilleCOSSA_4352927
Jednoduchý kĺbový záves slúchadla na Lamax Base 1/ Simple joint handset hinge on Lamax Base 1
This is a 3d model of a Radio Hook that would be installed in a Ford vehicle to hold the CB radio microphone handset. The size is a little large to accommodate for hand finishing. It just needs some sanding to ensure a good fit.…
Full details including parts list (for speaker, mic, etc) and parametric source here: https://hackaday.io/project/201909-handset-modular-3d-printed-h-250
RC Handset Wall Hanger Long and strong enough to hang the RC handset either way up PETG 230'c 80'c 40mm 100% infill strength and flexible (50% infill 5 hrs print) No support 7Hrs Print Category: R/C Vehicles
This 3D-printable hook is a replacement part for the Dewert handset models Classic 45167 and Classic 27760 . The original plastic hook often breaks after long-term use—this printed version restores a secure way to hang the handset on a…
Attempt at creating a model for this post on Reddit. https://www.reddit.com/r/3Dprinting/comments/1s2qq5f/i_work_as_a_911_dispatcher_and_im_on_the_hunt_for/ Also created an extra one that is slightly beefier in the lower portion and…
Pins for the model from Camille COSSA @CamilleCOSSA_4352927
I bought a field phone that was missing the end caps of the hand set. It seems to be an M45x2mm thread, but it needed a lot of clearance to fit. These end caps are quite crude, but I don't have the original ones and I couldn't be bothered…
Remix of https://www.thingiverse.com/thing:1211781 Changes were made to hook on a Asus VP28U 4K screen and hold an HyperX headset Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 35…
The iOptron CEM40 telescope mount ships with the 8407+ handset, but does not have a holder, so it just dangles with no place to attach it. To remedy this, I designed a holder for the handset that attached to the tripod leg (2 inch…
Used Overture grey ABS at 265C nozzle, 110C bed with .8mm nozzle. Prusa MK3S+ No supports or brim. Smooth PEI bed. Note the handset bracket (the part the handset goes into), has a sloped surface on the inside edge on the front. This…
![[Dual Sided] Cisco 79XX Series IP Phone Handset Retention Tab](https://media.printables.com/media/prints/142802/images/1351281_a9050bad-7d25-4e7f-a698-783ea929eaea/large_display_no_tab_142802.jpg)
