Counting matching models…
Here is a coaster for the Iowa Hawkeye fan in your life! This is originally made by Dart31 on Thingieverse. I printed this with 15% infill using CookieCad PLA in Black and Prusament PLA in Oh My Gold. You can print this coaster with:…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
I absolutely loved tacohittah's ornament , but I wanted a bigger version on a stand as a display piece. I closed the hole on the ornament, made it 300% bigger, and added a stand with the IOWA branding as an inlay. All of the pieces are…
Bring the Marvel universe into your collection with this highly detailed 3D printable figure of Hawkeye with Baby Groot perched on his shoulder. This unique collectible captures the perfect balance between action and charm — showcasing…
Remixed from https://www.printables.com/model/184911-iowa-hawkeyes-decoration by Dylan2868. Changes fixed thin walls made logo and border flush added some thickness to black layers to give it some additional heft added hole at top to use…
Part of my Marvel's Avengers Coaster collection where other Avenger coasters can be found. Also print the Avengers Coaster Holder to keep all your Marvel Coasters in! Designed these using Fusion 360 after my favourite comic book, movie,…
Mount for Radiomaster Pocket and Hawkeye 3.5inch FPV monitor Requires screw (M3x12 works well) to fix monitor to mount. Mount snaps onto Pocket "To attach, put the bracket over the strap mount point on the centre or the radio at an angle.…
Model of Subaru Impreza GD Hawkeye Dimensions Length: ~ 38mm Width: ~ 30mm Height: ~ 1.8mm Print settings Nozzle 0.4 mm Layer height 0.2 mm Material PLA If you want to see more of my Subaru projects, check out my profile !
Famous US Early Warning (EW) aircraft. Still in service and upgraded continuously. Designed by: http://logic-wizard.art.coocan.jp/fms_e.htm Hint: Glue: UHU hart, make "legs" from skewer (24mm).…
With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorter No supports. Only brim needed for tall part Easy to disassemble Held by friction Stem must be printed in shown upsidedown orientation for it to be…
M.A.S.H. - Captain Benjamin Franklin Hawkeye Pierce - 1972-1983
M.A.S.H. - Alan Alda - Hawkeye Pierce - 1972 3D printable model.
This is an easy printable mount support for Hawkeye thumb 4k camera. Must be in TPU material. For the installation you'll need 2xM2 screws, the one's in the pictures are perfect. Its suitable for all canopy Mobula style. Enjoy! Print…
Hawkeye logo for the University of Iowa on an Iowa background. I included a color change in the slice so the logo was a different color than the state. Space for a small magnet on the back. Printed with Hatchbox PETG bright yellow and…
This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.
Iowa Hawkeyes Oversized Necklace Logo that I designed. I hope you enjoy!
Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video: https://youtu.be/c1FKlvVu_cY Printing: Open stl, split to objects/parts (there are 2 parts), orient as in photo and…
This switch cover was designed for Prusa MMU. In PrusaSlicer use “smart fill” to select the different contours. Each section has a .001" height difference to allow for easy color selection. Print face down.
Cut the blaster at just before the line just above the grip, install the new plunger rod. Cut the rear plates to fit, gluing the right side on the ledge and using it to line up the other side. Print the plunger rod with 3 walls, 10 top…
20, 30, 40 degree fpv mount for Hawkeye FireFly Micro 2 ! U can use zip ties for a more secure hold. Lot of mounts for OLD VERSION of this camera is lying around, but it won't fit as Micro 2 is bigger! Added 20, 30 and 40-degree version…
3D model description [The minifigure is not included in the purchase! In case of misunderstanding, I do not assume any responsibility] Minifigures compatible LEGO base plate for Hawkeye + blind dog minifigures Hawkeye is an American…
Full lean angle for the thumb camera and comfy place for a small gps module.
V2 Hawkeye mount design with Fusion 360 files No supports and no brim needed Held by friction Requires 3pcs M3x12 (2 screws for TX16S and 1 screw for monitor) 3 slots in radio mount currently has no use but it's left in case later mounts…
Created with Fusion 360 then airbrushed. The individual parts were glued (cyanoacrylate) to the base after printing (& painting). The following Vallejo airbrush colours were used to complete the look. Marvel Studios Logo - White (71.001)…
Hawkeye nameplate, kinda of experimental if you give it a shot and it doesn't work I would love to hear how it turns out! For more cool 3d printing stuff check out my Instagram: @djs_3dprinting Category: 3D Printing
Ultimate Iowa Hawkeye fan set for when the game is close or a Cyclone fan shows up. Completely my design. Three separate pieces. Never find another set like this gem. Be cool on a desk or in a man-cave on the bar.
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my TX16S Transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp it to…
Decidueye x Hawkeye pokemon x marvel Check out my other designs.
If you like vinyl records and Hawkeye, you will appreciate this 3D printable model of a 45 record adapter with a Hawkeye logo design. This adapter lets you play your 7 inch records with a larger hole on a standard record player. It also…
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
Made for me to adapt a Kodak Series VI 31.5mm Adapter ring to use a close-up lens on my Brownie Hawkeye for taking portraits, with an adapter flash. (Two wires & electrical tape) I printed in 15 minutes on a stock ender 3 in PETG with 20%…
Unfortunately it does not clip into the original wire, so it is a bit fidly, but it is stronger and does not break as easily as original one.
Hawkeye Firefly X LITE II 4K Naked Camera holder for drones. Added counterparts for Apex frame. Holder is mountable on Crux35 frame (M3 screw) and GEPRC Cinelog 35 v2 Filament: Gembird PETG - using Prusament PETG profile Infill: Gyroid…
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my Spektrum DX6i transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp…
My First Upload here :) Please comment ;) Print Settings Printer: Tinyboy/Filabase Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Category: R/C Vehicles
Simple lens cap for the Kodak Brownie Hawkeye. The cap covers all three elements. I appreciate any support you can give. It helps motivate me to continue sharing my creations.
Print orientation same as the original model. I recommend using standard/manual supports after support-painting the highlighted face (Paint-on supports tool in Bambu Studio or an equivalent). Print settings: Same as original. every other…
Hawkeye SuperNOVA Regular Flashlight Adapter Description This is a simple flashlight adapter to connect a generic flashlight to a Hawkeye SuperNOVA Borescope. The original light source was damaged by leaking batteries. This adapter adapts…
Mount for Hawkeye little pilot FPV monitor Requires screw to fix monitor to mount. Mount snaps onto round dial. 2 version : tilt and flat
Simple snap cap to protect camera lens. Category: Camera
Just a simple case to hold Hawkeye Thumb2 and 2 ND filters. This consists of case, lid and insert. If you wont print the insert it can be used as a simple case for anything else. To hold them securely in-place and won't allow vibrations…
Hawkeye SuperNOVA Regular Flashlight Adapter Description This is a simple flashlight adapter to connect a generic flashlight to a Hawkeye SuperNOVA Borescope. The original light source was damaged by leaking batteries. This adapter adapts…
Decidueye x Hawkeye pokemon x marvel Check out my other designs.
M.A.S.H. - Alan Alda - Hawkeye Pierce - 1972 3D printable model.
NOT A PERFECT FIT! Was designed in a hurry for it's intended use only on a rally car. Was printed in TPU and glued (sikaflex) into bumper as the driver smashed the vents out almost every event as can be seen in photos. The final version…
I created a mount for the MakerHawk Camera. I attached it with 2 M3 screws. If there are any wishes/ideas or changes that should be done. Please let me know.
This remix was created to correct the dimensions of the original model. The issue was that the TPU part was about 1 mm wider than the slot in the top plate, causing fitment problems. The remix was completely re-created parametrically…
Token Arrows for the Hawkeye Ally in marvel champions No supports, change colour at 10 and 11 when printing with a 0.2mm layer. (I recommend starting with red, changing to black at layer 10, changing to white at layer 11) Create layer…
It uses a real airfoil. In fact with 1 wing on it'll roll to the side without the wing.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA BambuLab Basic Red PLA+ Sunlu White This print uses 4 unique filaments Swap…
The Grumman E-2 Hawkeye is a carrier-based early warning and control aircraft used primarily by the United States Navy. Introduced in the 1960s, it features a distinctive rotating radar dome mounted above the fuselage, allowing it to…
its a benchy. has more over bridging than most so some supports may make it better but its very possible with tunes settings you wont need them. good luck . if you print it i would like to see what it come out like with your settings and…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
NOT A PERFECT FIT! Was designed in a hurry for it's intended use only on a rally car. Was printed in TPU and glued (sikaflex) into bumper as the driver smashed the vents out almost every event as can be seen in photos. The final version…
print using normal auto supports on the higher end of the temperature range of your tpu
Simple lens cap for the Kodak Hawkeye Instamatic R4. I appreciate any support you can give. It helps motivate me to continue sharing my creations.
Overview It's a shell mod for the Xshot Hawkeye it requires a knife, the shell, and some kind of padding or craft foam for a seal. How to use To allow your Hawkeye to use the shell, you have to cut out the air-restrictor (the thing inside…
Made this for my sister. I sized it to my Ender 3 Bed and dropped it down to get about 2-4mm of bottom layers before doing a color change for the boarder and Hawkeye logo. Category: Art
This Hawkeye pirate file will include a highly detailed sculpture of this character on a base. Each file will work in a resin or FDM printer. Feel free to scale this up or down accordingly. This is a personal use-only file. Use it to…
Hawkeye 4K Thumb case to protect the camera.. Print this in TPU Category: R/C Vehicles
Spiderman LED Light Box I use the 6.5' Monster brand LEDs. They are available on Amazon for about $10 each: Amazon.com: Monster 6.5-Foot Color-Changing LED Light Strip, Multiple Combinations and Modifications, Remote Control, 5-Volt USB…
Bracket for the Hawkeye Thumb 2, inspired by Painless360's thing: https://www.thingiverse.com/thing:6593421 .
This switch cover was designed for Prusa MMU. In PrusaSlicer use “smart fill” to select the different contours. Each section has a .001" height difference to allow for easy color selection. Print face down.
