Counting matching models…
Jeep Grand Cherokee's often have a small issue with the material around the cup holder. This trim is coated in chrome and becomes very sharp when it peels; damaging or at least marking whatever is placed in the cup holder.…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
The Piper PA-28 series is a family of single engine, low wing, four seat aircraft. PA-28's were first introduced in the 1960's, with the Piper Cherokee. It had a square wing with fixed tricycle undercarriage, and was available with…
Hello. I wanted a snorkel for my Jeep. So i made one. It´s designed for the passanger site. But you can flip in PrusaSlicer. With the part “Bohrplatte” you can drill the holes in your hardbody. In the snorkel will fit 2 threaded Inserts…
I took Renafox's Jeep Cherokee model on Sketchfab and made it into a shell. You can find Renafox's model here: sketchfab.com/3d-models/jeep-cherokee-3fdd9619be2c4e7b809888d08cbdab88 . Then I removed the windows for FPV. I added my…
The model is modified with less stroke on the hot side with the hope it won't jam and break. It is also modified to be easier to print with less supports. One model is for the passenger side and one for the driver side.
The 144mm model is at 10th scale to the real thing. I printed the 72mm version with a 0.2mm nozzle so that it's not so big on the keyring. If you're printing with a standard 0.4mm nozzle you might want to play with the scale to get the…
Piper PA28 Aircraft all have 4 fresh air vents in the cockpit near the floor. They are very fragile vacuum formed plastic and easily damaged by peoples feet. I made the replacement parts in PETG. The two parts were redesigned slightly for…
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
Keychain Jeep Cherokee XJ / klíčenka Jeep Cherokee XJ
Hi i bought a SCX10 and a Team Raffee Cherokee Hardbody. But how do i mount the body? My solution is simple. Print the 2 parts. Mount it with to the Hardbody. You need longer screws i took longer screws from the SCX10 Mounting Bag which…
I recommend printing at the odd angle shown in the attached gcode to manage stresses in the part and reduce overhang issues but YMMV
After some driving i broke my rubber mirrors. Instead of buying new i made some folding mirrors. These mirrors are for the Team Raffee Co. Cherokee XJ Hardbody. The mirrors are printed in place. No screw needed. You only need an M2x6mm…
This started out as a minor modification to Titan's existing design for a friend and quickly snowballed in to nearly a complete redesign. What was changed. -Fixed a ton of miscellaneous geometry errors. -Rebuilt factory switch sockets.…
Center console latch for 84-96 Jeep Cherokee. These parts tend to break so why not make them better? This latch helps keep the center console more secure and fits just as good as stock! Pictured latch is printed out of PLA in a horizontal…
This is a remix of nonnux's 3D scanned design for the Jeep Grand Cherokee WJ Wheel Center Cap. https://www.thingiverse.com/thing:2453570 I lost a wheel center cap for my 2001 Jeep Cherokee Classic XJ that has the 16" ICON wheels. nonnux's…
The words "Grand Cherokee" in the Jeep font to replace lost badges.
measured off of my 98 Cherokee xj and a standard beer can NOTE: I do NOT condone drinking and driving
Made using my 98 Jeep XJ. The Auxbeam is from a wholesaler so just be sure to measure to make sure that this mount fits. I made 3 versions. just NOTE that it is a press and tight fit so if you need to get it out once it is screwed in…
Cherokee chief - Keeper of the Ancestral Flame
This is a mount for a Jeep Cherokee that has a bin up on the center of the dash. It is made to connect to a Lisen for magsafe charger through a ball mount. This is designed to hold an iphone 13+ pro model.…
JEEP Grand Cherokee, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
This is just a modified version of my existing switch plate that uses six factory switches and the lighter plug. While you can bridge the openings for the factory switch latches, you get better results with supports. That said, I…
This is a dash kit to hold a single din aftermarket radio and 5 round switches. Way stronger version then the ones you will find online for sale. Just slide your radio cage through the hole bend a few tabs to hold it in place and slide in…
The purpose of this model is to present an approach to incorporating indigenous languages into the teaching of 3D printing design. Frequently, the first 3D printing design challenge presented to students in design software such as…
Print in PLA or PETG 0.4mm nozzle with no supports
Simple adaptor to allow a Yeti Rambler mug to be held by the cup holder in a WK2 Jeep Grand Cherokee. Updated to not get stuck in the cup holder.
My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…
Jeep vehicles with the scissors type window regulator have three pins with ball ends that have plastic rollers over the ball. These plastic rollers run in channels that raise and lower the window. Over time they break and the window drops…
I broke one of the bag clips in the rear of my Gran Cherokee so I designed a replacement. Works for WK2 Jeep Grand Cherokee models but may work for others as well.
Used Fusion 360 to replicate a Guillows Piper Cherokee 140 balsa model. I can't post the instructions here due to copyright, but if you search hard enough, you can find them. Each part is named to match the instructions with the number of…
Needed a keyfob replacement for my 2014 Jeep Grand Cherokee. Created in Fusion 360 and printed up one really quick. Ebay sells metal ones for $6 shipped. Probably better to do that. But here is an alternative option you can print for…
Jeep Cherokee XJ Auxbeam 6gang Mount. made off of my 98XJ. i modded my 8gang model and measured my 6gang in my truck i have not test fit but if you have issues i'm more than happy to fix the file and re upload. should be a nice press in…
Injora Jeep Cherokee XJ Hardbody mounts for the Traxxas TRX4 printed in PETG I modified the original rear mount to make sure the wheels were aligned in the wheel wells. The rear mount is a modified version of another that I found a while…
Printed in TPU 100% infill. simply remove old grip and slide replacement on. Fits snug but you can add a little glue if you feel it’s needed.
Jeep Cherokee Mopar Cargo shade cover - Left and Right, please note the L and R are facing downwards when installed. These will likely fit other vehicles so long as the specs match those shown in the illustration I have attached. I used…
measured off of my 98 XJ and a 2.5'' can. *pictures are not correct as i didn't want to upload pictures of my first model *
Habe mir zwei Rock Slider erstellt. Abgestimmt auf den Jeep Cherokee von Axial (SCX10). Vorteil: man kann die Karosserie in den Rock Slider klemmen und die Seitenschweller in der Breite einstellen. Karo klappert nicht so, einstellbare…
This is a bumper for the center console on the 96-98 Jeep Grand Cherokee ZJs. I printed mine in Polymaker 95A TPU. I recommend cleaning up the old holes with a 10mm drill bit by hand (not in a drill!) and/or blade and/or wire cutters. One…
This is the Oval-shaped firewall boot / grommet for the Engine Control Harness used by the 4.0L AMC engine. Used by AMC Jeep Chrysler from 1984-1996. It was commonly found in the engine bay of the Jeep Cherokee Comanche XJ MJ. It is exact.
This is a switch panel I made, the original didnt have enough slots for switches for the aftermarket parts that where being added to the vehicle. I tested this print and adjusted it a lot so it would work well. I used prusament petg…
Model Jeep Grand Cherokee wk2 wall art. height 3 mm, thickness 2-3 mm. Assemblable from 2 parts
This is a mount for a Jeep Cherokee that has a bin up on the center of the dash. It is made to connect to a Lisen for magsafe charger through a ball mount. This is designed to hold an iphone 13+ pro model.…
Jeep Cherokee XJ 1 gen 2door seat trim around lever that fold seat - the crack after time best to print vertical with only neccesary organie supports as in Gcode attached, fits both sides - the same PETG Prusament - urban grey, fit the…
You printed my other Hardbody mount? You need something in front of the Body? Here it is! You need some Screws and 4 Magnets (10x20x3 mm). I bought some magnets from the Baumarkt. Each magnet can Hold 4kg. 2 magnets are installed between…
Center latch was broken on my '87 XJ before I bought it . Designed this one off of pictures online and the pieces left. Here's another option: 84-96 Jeep Cherokee Center Console Latch by Josh Nez I haven't used this model but this…
Print flat, then install upside down. The part is thicker around the gear selector, but there isn't room for that reinforcement on the top, so it has to be on the inside. Use a semiflexible filament for best results, I used PLA+.
This is a grommet which goes over the front brake lines in a Jeep Cherokee XJ. The grommets go in the holes in the front wheel wells, where the brake line passes through from the engine bay to the wheel wells. I made these with TPU 15%…
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an SCX10 there are also body mounts available here on my Pritables Site. L and R mean left and right. Most parts are…
Just a simple design for an 80's model Jeep Cherokee visor clip replacement. Made a couple in PETG for my brother after designing it. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.16 Infill:…
This is a front bumper retainer for my 2000 WJ Jeep Grand Cherokee Limited. I'm assuming it is the same for all 1999 - 2004 WJ Jeep Grand Cherokees, and you can't really mistake this for any other body fastener I have seen. It is fully…
2010 model Jeep Grand Cherokee cargo handle, since I can't buy it, I made it. Printed out of ABS and works great. Added 4 screw holes to clamp it firmly to the cover. NOTE: YOU WILL HAVE TO USE A 9mm HOLE PUNCH FOR THE 4 STUDS Easiest way…
The antenna topper is designed for a Honda CRV 10mm rubber whip antenna. The hole is 30 degrees from vertical. Two STLs are included, one with the antenna hole, and one without so you can make your own hole. It's "kind of" scale; all the…
This is a model kit of a plane.
If you own a 2019-2023 Jeep Cherokee, you are likely to encounter corroded retainers for your license plate on the tailgate, causing you to remove the entire nut with your plate. This 3D print file provides a solution. This replacement…
Simple yet effective dashboard holder for Yanosik XS device that fits in the Jeep Cherokee KL dashboard. I've used cloth tape to ensure it won't damage the plastic parts of the car. Also it gives it a better grip than plastic on plastic.…
Wipers for Axial Jeep Cherokee 2000 /lexan body/ Material: PLA, black :-) 3D print: Prusa MK3s, 0,25 nozzle Printed with supports Apply double-sided tape onto contact surfaces (3M) Use heat to shape (warm water) Použitý materiál PLA, 0,25…
This is a switch blank for a Jeep Cherokee Comanche XJ MJ. Used by AMC / Chrysler as a dash blank from 1984-1996. It's dimensionally spot on. Enjoy!
Like so many other XJ owners on the internet I too encountered a completely stuck fuel pump retaining ring. After attempting to remove it using the ‘hammer and scredriver' method and only marring the cap I went looking for other…
Print on its side, so that the layer lines are going horizontal. Supports are needed! Highly suggest printing with full walls for strength. Any infill might allow cracking instead of bending.
This is a seat belt sleeve that wraps around the lower seat belt mount point on a drivers / passenger side seat belt. This design was measured off the OEM Jeep comanche bench-seat seat belt sleeve. If you have a cherokee, subtract ~2in in…
The fit is NOT perfect, so i needed to do some sanding. It is hold on to the bracket with some silicone. I also added .step and .f3d files if you want to fix and adapt the design This is a replacement cover for Jeep Cherokee lincense…
Seat lines for Jeep Grand Cherokee zj
This is a bezel to install a single din radio in a Cherokee XJ. I didn't find any basic install kits on here so I measured my broken one I had and printed this. If it is angled just right it will fit on a 220x220 print bed face down and I…
🔧 Design Concept This 3D model replicates the air vent control clip specifically designed for use in Jeep Grand Cherokee 2005–2010 models. The design focuses on accuracy and compatibility, ensuring it fits seamlessly into your car's…
This part will allow you to move the Off-Road Accessory Kit over to the right side where it fits perfectly into the alcove where there are two bag hangers. This gets it out of the way of the main cargo area. (see pictures) This was…
Door handle nut cover for Jeep Grand Cherokee 1995
A Bin for your Jeep Xj's Cupholder, designed specifically to fit the back cupholder which doesnt actually hold a cup (unless its like, a really small one or something) Printed in PETG, PLA may work but i would not recommend it due to…
This is a clone of the Brake booster spacer present on the 1996+ XJ brake booster assembly. This is dimensionally accurate and measured off of the genuine chrysler booster+master combo found on the 1996+ cherokee XJ. The original part was…
Material: PLA, Prusa MK3s Use heat to shape (warm water) Pro natvarování do mírného prohnutí karoserie (aby to sedlo) nahřejte třeba teplou vodou, nebo mírným plamenem :-)
The old inserts broke when taken out of the grill, one survived and was used to create a 3D CAD file. Recommend ABS/PETG, using 100% infill. You may need to scale this model up or down a smidge to get it to fit. Use atleast 3 walls.
All files updated 2023-09-23. If you have a 1999 to 2004 Jeep Grand Cherokee(AKA WJ), you may have wondered what you might put in the little dash cubby … or you might just have stuffed random things there. This printable will fit in…
this is so your coke or any drink with the same size won't tip over
This is the relay cover cap used in the engine bays of the Jeep cherokee and comanche from 1984-1996. The original part has holes in it, but this is completely solid for longer life. Print this in a high temperature plastic or ABS so it…
My brother was needing to add upfitter switches to a mid 90's Jeep Cherokee so i created this panel that replaces the lower area of the center of the dash with upfitter switches.
PA-28 interior air vent. Provides much more directional control of the airflow. Useful for keeping yoke mounted tablets cool in the summertime. Print in abs or similar to prevent warping No supports needed Brim is optional for center part…
Replacement clip for the headlight and fog light cover for the Jeep KL (mine is a 2014, but this should work for others as well). Tip appreciated if this helps you out :) Category: Automotive
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
I was always missing a place where to place a small bowl during vacation trips. The box can be placed on the driving selector wheel. The model is split into single parts to be printed without support. Material should be food- and…
Use a high temperature, possibly flexable filament. I used YXPolyer PA6 (no fibers). I suppose you could try a fairly stiff TPU, and could also try ASA/ABS, but I'm not sure how they'd hold up to the heat. See below for support sections.…
2015 Jeep Cherokee Dash Pop Socket Holder Rev.2. Needed a better solution that didn't block my vents.
Overtighten knob to charger's ball joint to aid in screwing in knob to base
A simple coin tray for a 2014 Jeep Grand Cherokee (or a similar model). This coin tray features dividers to separate quarters, dimes/nickels, and pennies from each other and fits in the driver-side doorhandle and can be easily slide in…
About A simple hinged mount for Auxbeam 6-gang switch control onto the coin-tray of the Jeep Cherokee KL. This design eliminates the need for drilling into the console, allows the panel to remain reasonably within reaching distance yet…
Shifter Dust Cover of Jeep Grand Cherokee WK/WH 2005 - 2010 Printed with Ninja Flex
Another iteration of the design. Moved the pop socket holder over more to the left and angled it more to the driver for better visibility. Also added a little more of an appropriate design to the extra space created by the move. I would…
This is a custom 3/8 drive deep socket intended to fit the head of the lower, outer, headlight stud on a Jeep Grand Cherokee ZJ that is twist locked into the header panel. the hex on the end is a 19mm and the body is a 26mm hex. I printed…
YOU PROBABLY SHOULDN'T PRINT THIS! Update, July 7 2023: Dave Hayden took the resin-printed typeball concept and improved on it greatly . I'm extremely grateful that he took on all the hard work of iteratively going through and dialing in…
Designed for 2022 Jeep Grand Cherokee L but should work with all newer Grand Cherokees. Secures 2 phones upright so they don't flop around while driving, does not support use of the built in wireless charger. Works with apple wallet…
I modified an existing 3d print for post 94 models (linked below -- thanks to MechEgnr for letting me share) to fit pre-94 XJs. This is larger than the other model and offers three centered clips as opposed to the four clips on the other…
Jeep Grand Cherokee 2012 Model, headlight fender cap cover tested, workds perfectly
Rear bumper hitch cover retainer for Jeep grand Cherokee WK2. The part can be printed with a bigger nozzle diameter for more strenght. There is a spring in the mechanism which you have to buy separately. I got mine manufactured at a…
There is a hole to the left of the trailer hitch on the Jeep Cherokee Trailhawk meant for electronic things. If you don't have those things, you can use this to cover that up (could also hide something in it turning it into a “secret…
I purchased this body model for an Axial SCX10ii and created some additional parts for it. https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/jeep-grand-cherokee-1977-body-for-print The lights are for the left side only but you…
Nut cover for Jeep Grand Cherokee 1995 steering wheel.
Tested on 2016 Latitude. Press fits into the cavity but I secured mine further with a bit of trim glue. PLA will warp in the heat as you can see in the picture, recommend PETG or ABS. Can be customized.
I pulled a design from grabcad and remade it into 2 4" round taillights and split the body for smaller 3d printers to handle it. Will include the .step file so you can either reassemble the split or modify/clean up the housing. Post a…
This part is found on the back of the heater control unit of a 97 or 98 Jeep Cherokee. It is used to operate the heater blend door cable. You will need to use a .25mm nozzle, running a .07mm or .05mm layer height, and have every thing…
Fits 1984-1996 Jeep Cherokee. Fitment on 1997-2001 models is not verified, so please measure yourself if that's your application. This floor plug fits the larger holes in the front floor pan on both the driver and passenger side.…
Used to check or set strut lengths for a 1968 PA-28-140. Front Nose 3.25" +- 0.25" Mains 4.5" +- 0.25" *Confirm strut length for your plane before using.
