712 models
This is an easy-to-print Synthesizer Stand angled at 45 degrees. I am using it for several synthesizers at 100 percent and 85 percent. I print up the first batch of four and am now printing another four. Will support Synths or mixers up…
Print approx. €20.80–€25.42 excl. taxPreliminary estimate for one variant
It's not pretty, but hopefully it can help someone else out in a pinch. I've also included the Fusion360 file. Instructions : 0.2mm PLA Add some support underneath the lid. See starbond-ca-nozzle.3mf , it might be overkill but gets the…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Made for a friend who had two Behringer synthesizers he wanted stacked on top of each other. Uncertain if the hole pattern works for other models but taken from the Behringer Model D. Made to replace the side cover and use the original…
Print approx. €8.65–€10.57 excl. taxPreliminary estimate for PETGSource material: PET
Adapters for two different hose sizes: 18 mm and 22 mm (plus an 18/22 mm combo). The combo adapter is shown in the photo. The .3mf file shows how I painted-on supports for the combo adapter. I also used a 3 mm brim for stability. Print…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Self-Adhesive Cable Wall Clip Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Easy to remove cables when needed. Can be scaled for different…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Rat gas anesthesia masks for stereotaxic surgery. Designed in Fusion 360 to replace an original part. Requires an M4 screw and a nut, and also a little bit of glue to hold the nut. I recommend printing the thicker version. Enable supports…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
This is an easy-to-print Synthesizer Stand for “Make Noise,” “East Beast,” and “West Pest” type Synths. Will support Synths around 228.6MM X 139.7MM or 9 inches x 5.5 inches Places the Synth on a comfortable 5 degree slope No support…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant
This is an easy-to-print Synthesizer Stand for LYRA-8 Organismic Synthesizer Will support the LYRA-8 Organismic Synthesizer or Synthesizers around 266.7MM X 266.7MM or 10.5 inches x 10.5 inches Places the Synth on a comfortable 5 degree…
Print approx. €15.33–€18.73 excl. taxPreliminary estimate for one variant
This is a patch cable / USB cable holder. I use it on a plywood deck where my synthesizers are crowding along with my science fiction models. A support enforcer is needed No gluing Easy to print Designed on Tinkercad. Enjoy!…
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant
A simple mount to be able to magnet mount the self-adhesive hooks from Rusta. You pick howmany magnets you use, up to 9! I used 5 and stuck the hook on it. works like a charm. magnet diameter is 10,1mm and 2,1mm deep.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
Prosthesis finger, to be printed with strong material. Will not be functional when printed in FDM PLA. Functionnal proof of concept, dimentions to be adapted to fit the need.
Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable
Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
This is a quick test I designed to test bed adhesion. There are some crazy tests out there that'll determine holding power and such, but I just wanted something that would replicate the sorts of issues you might run across in everyday…
This is a Remix of kjbturok s Bambu Lab X1C Plate and Gluestick Holder to fit both the big 3DLAC Spray Can and the smaller Spray Bottle. Additionally it can hold the Bambu Lab Glue Stick, another Spray Bottle with ~33mm diameter (I have…
A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…
Super quick and simple print I recommend doing after you first setup a new resin printer. Simply duplicate the raft out to line the build plate like you see in the image, and print it off. I recommend keeping the slice file on your USB so…
This is a replacement nozzle and replacement nozzle cap for Super Glue/CA Adhesive bottles. It's possible multiple brands use this type, but this one was specifically modeled after the Rockler/Stick Fast brand, for the 4.5 Oz bottles. In…
This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…
BioMech Finger Prosthesis In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on…
This tests the adhesion in a few more spots, to better fine tune the bed levelness
In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…
This is an adhesive backed cold shoe mount. Can be used to place camera and microphone gear that utilize cold shoes anywhere you can get 3M VHB tape to stick. I specifically made this to mount a Deity V-Mic to my primary workstation for…
rectangle 1 layer thick to test your bed adhesion and clear off residue from print bed infill-100% Supports-no Rafts-no
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
Print your slick adhesive hook in any colour. Please read the instructions for detailed information about the printing. Print instructions The instructions can be found in the pictures.
Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…
The higher you print it, the heavier it gets! Test your bed adhesion with this. Play with your fan speeds, your heat settings... see what works! The higher it prints, the more it pulls on the bed. Measuring gauge on side in 25mm steps.…
CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…
You can print each of these three components separately and then glue them together for use.
Simple but effective bed adhesion test for your 3D printer to verify if your bed leveling is correct. The model is shaped to be only one layer tall so you can peel it just right off and not waste material. The xy dimensions are calibrated…
This is a qualitative layer adhesion test. If your trying to get the best layer adhesion in your prints, you can use this model to look at the failure mode of your layers. Ideally, you are looking for a cohesive failure where the part…
I have scoured printables for the different lucky 13 hand gestures that have been made so far. this is primarily a repost to put all of them in one place. I'll continue to update this list as new ones come out. Each file is a pair of…
Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…
I tried hardly a convenient way to store/display my tape rolls on my Skadis boards. I downloaded all what I found online, but that solutions had many issues. Some was difficult to plug into the Skadis pegboard, some was too weak to hold…
Pretty simple cylinder. Good test to see how well your prints stick to the bed. Use the 40mm tall one to test various temperature settings and/or other settings until you find the one that sticks nice and firm to the bed after the print…
Fusion 360 files released by request: This is an early release of version 2: Changes: Added 3D print support to the design. Some changes / forms created / added for future design changes. Left index – to convert to right hand use mirror…
This is a Remix of @daclasen and @TmnSn I add the holder fpr the Top Glass on the original file. And I made two new files one with out the accessory holder and one with out the Glass and building plates holder. I add some magnets 6x3 for…
This is a replacement mixing nozzle for the 2K epoxy adhesive cartridges from UHU. With this glue I like to glue larger components or generally components which must be firmly bonded together. Unfortunately, only two mixing nozzles are…
A 3D-printer torture test. Highlights cooling, overhangs, stringing, bed adhesion and more. Please note that this is not an easy print, ensure proper bed adhesion before attempting this. I wanted a model to use while finding the optimal…
Cardo Packtalk adhesive mounting plate replacement
Simple adhesive hooks for utensils to be glued (or acrylic-taped) onto the underside of a kitchen cupboard.
Test your bed adhesion with this fast and simple test. Print with spiralize/vase mode. LH 0.2 30mm/s (or slower depending on your cooling capacity) ~25min print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This is a development and modification of a real knee prosthesis.
This is a simple parametric synthesizer stand. It was originally designed for the Vector synthesizer but can be used for any other gear after changing the parameters. The stand consists of two identical parts. When printed wide enough…
Introducing the Universal Flight Sim Trigger Module by @TheSimNet! Featuring: Dual or Single Stage operation Authentic operation Consistent return force Satisfying break action click Parts required: Mini Micro Limit Switch 5A 125 250V AC…
This is a simple Cable Clip. You can use it with M3 screws or similar but you can also mount it with self-adhesive tape. The inner diameter is about 6mm. 01-12-2020: CLIP WITH LARGER DIAMETER ADDED Category: Electronics
As part of our school main project I printed this e-Nable Hand Prosthesis. The model is reverse engineered from Thingiverse in SolidWorks 2019/2020 SE. Print instructions https://www.thingiverse.com/thing:1453190 If you want the…
Testmodel to test the layer adhesion of PETG. PETG tends to lose layer adhesion or become brittle when the humidity is to high. Model details: 25x25x25 (mm) 1mm Wall thickness 0.95m Filament 2.85g Filament
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
Prusa Core One Rubber Foot Holder – Adhesive‑Free Upgrade The adhesive on the Prusa Core One’s rubber feet has always been an annoyance for me, and with some inspiration from Prusa Core One Feet v2 - Prusa rubber feet reuse by Ondrashek ,…
I printed with slim tree supports.
Adhesive tape holder, use 2x screws, infill size tape 75mm
I just filled the screw holes since I planned to stick it with biadhesive
This model is designed for printing with a .4mm nozzle and .2mm layer height. It's a great way to diagnose and calibrate things like nozzle offset and fine details as well as overhangs and retractions. I printed my test on a direct drive…
Print recommendations: Print laying flat (not vertically standing up), as shown in the first picture. No supports Use double-sided tape, my favorite is 3M VHB.
I recommend using a good double-sided tape to fix it firmly. Easy WAF Points ;-)
Let me know how many levels your printer reached !!
Calibration Test Circular – Retraction & First Layer Check 🎯🖨 Not sure if your 3D printer is calibrated correctly? This Calibration Test Circular is here to help! 💡 Test your printer's retraction settings and first-layer accuracy with…
That can is soo tall it always ends up falling when it's on my bench next to my Prusa printer. She needed his own place. - Design in Thinkercad. -Printed in PLA+ - 0.4MM
What you see is what you get. :-) Data: Build plate adhesion: Skirt Number of lines: 4 Daten: Druckbetthaftung: Skirt Anzahl der Linien: 4 Print Settings Rafts: No Supports: Doesn't Matter Resolution: 0,2 Infill: - Filament: all Category:…
Here are a couple of tips for an E6000, 3.7 oz tube of adhesive. Fine has a 1.5mm tip, Small is 1.8mm, Medium is 2.0mm and Wide is about 4.3mm. No supports, raft, or brims 2.0mm PLA 15% infill Rotate the part 90 degrees, then use the…
A minor remix of Kh's Guition 4" 480x480 mounting bracket with holes for accessing Command adhesive strips from inside
Short, new Version: https://www.printables.com/model/470834-phone-dashboard-mount-v2 17mm seems to be the default for many chargers using ball joints. I recommend printing in a Material with a higher melting temperature to prevent…
Designed with slight curve to be taped or glued into place on a bike helmet.
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
Precision 3D Printed Nozzle for 310 ml Adhesive Cartridges Product description This versatile 3D printed applicator nozzle is designed for controlled dispensing of thick construction adhesives and sealants from standard 310 ml cartridges.…
Simple hook to store your bike helmets on the back of a door for example. There is already plenty of design with screw but that's sometime not possible to do so. 2 version available: Big hook for bike helmet Small version of the hook for…
Modified the mounting bracket to fit 40mm wide VHB tape. Thanks to Calini for the original design!
I needed replacement for original knobs/sliders because they are sticky from uv light so after couple years they useless. designed in fusion360. sliders are tight fit! Sequener pattern knob is difrent so i designed also this variant.
I've used this part to test ZillaGrip on my steel FlexPlate. More info in my video: youtu.be/IrL0kZ1LjYo It's a copy of Toms design used in his video about Grocery Store Bed Adhesives:d youtube.com/watch?v=MAw2FK8y5i4 Print Settings:…
To attach my two Samsung T7s to the back of the iMac stand, I took @OSXtraveller's (perfectly fitting!) model as a template and filled the screw holes. This modification adjusts the base so that it provides a continuous surface. Attaching…
After trying hardly a convenient way to store/display my tape rolls on my Skadis boards and downloaded all what I found online, but that solutions had many issues: some was difficult to plug into the Skadis pegboard, some was too weak to…
Prótesis escalable para nuestras mascota . Es recomendable imprimirlo con materiales resistentes
Description / Overview This is a 3D-printable access arm that lets you press the power button of the Mac mini M4 from the front side—perfect for setups where the Mac is stored inside a desk shelf or cabinet. 💡 Key Features : Designed for…
Can be adjusted for your adhesive tape sizes. Uses https://raw.githubusercontent.com/clothbot/ClothBotCreations/master/utilities/fillet.scad
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
Print in the orientation from the .stl file. It is not a trivial task to get sharp points out of a 3D printer, so if yours come out a bit blunt you could use a nail file (or similar) to sharpen the teeth. Usage: stick it on your roll of…
Please give it a ❤️ if you like it 🥰 I designed this model to compare the adhesion of different 3d printer beds. Video FR about it: Please give it a ❤️ if you like it 🥰
Objective: Create a rubber Tip insert using a 3D printed insert. Materials: 3D printed Inserts: For best quality, I got the inserts printed on a resin 3D printer (Formlabs Standard Resin (SLA), Layer height: 50μm) - 8 each. Making the…
Not simple to print to have nice gear but, its nice to work with. Printed PETG 0,15 with supports 2/3 to have nice gear on pushing mechanism Update: I broke my tooth when adhesive was too old so i change design for easy print pusher…
I wanted to build a new “Honeycomb Storage Wall,” but I was asked to avoid drilling any holes so it could be removed without leaving any marks. To solve this, I designed a bracket based on the hollow inlays, which can be easily attached…
Simple remix that removes the four screw mounting points, for adhesive mounting. I attached it to my mirror with command strips.
Most of us know that self adhesive hooks available in stores are pretty expensive things. With these hooks hanging pictures and other small items on a wall can be pretty cheap. Hooks can be printed without supports. To make them do the…
I realized the parent could use some different attachment methods, this one is for command strips or velcro or adhesive mag strips. The cutouts for the default model are 0.5 mm deep x 19 mm wide, to accommodate a wide variety of possible…
I created this model as quick test that is larger/more in depth than the included bed leveling test in Prusa firmware but still smaller/quicker than most tests out there.
Slicer settings: • Printed in PETG • Nozzle size: 0.4 layer thickness • Layer Height: 0.2 (mm) • Supports must be activated, right in the dropdown menu (everywhere) • Supports are required for the small hooks of the glasses holder • Size:…
This holder for the Philips Hue Motion Sensor is designed to be fixed to the wall with adhesive tape or glue, to avoid drilling into the wall. The magnetic pin of the holder is held in place magnetically, I designed it to fit in a 5…
Wall-mounted display for hot wheels. Will hold up to six hot wheels. Printing on wall-side, no supports needed. Based on a thingiverse Remix of a shelf with nails by Zanecrc (https://www.thingiverse.com/thing:5807664)
Hi! My name is Malcolm. This design is my final project for CAD. It simulates the human hand-finger grip motion. It is an add on for PJ Prosthesis forearm base made freely available for whomever may need it. The mechanism to control each…
Original design: https://www.thingiverse.com/thing:4852416 additional Parts needed: 4x M3x8 screws 4x M3S threaded insert (short version, 4mm length) 1x Apple AirTag Information : I needed a method to mount an AirTag onto an object via…
Versatile 3D-Printed Adhesive Hook English The 3D-printed adhesive hook is a versatile and practical accessory suitable for both households and offices. Here are the details of this product: Material and Printing Details: Material: The…
This is my first ever remix. I wanted a tray on the front but I was looking for something that utilized the minimal enclosure shielding plate from @design8studio minimal DIY enclosure because I wanted to keep the screen mounted to the…
Description: Designed to store your hair dryer neatly against a wall or vertical surface. This mount secures to the surface using 3M Command adhesive strips, providing a quick and removable mounting solution without any holes or hardware.…
I've included STL, STEP and Fusion 360 files if you would like to edit. 6mm x 6mm. I printed in PETG but would work in most materials. 0.3mm layer height
![Super Glue/CA Adhesive Bottle Nozzle & Cap [Stick Fast/Rockler Brand]](https://media.printables.com/media/prints/78959/images/849535_1c4e08d2-5b99-4e11-9370-f4b47782731b/untitled.png)
