Cody Rhodes multicolour logo
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
- Downloads
- 737
- Likes
- 74
- Rating
- 5
85 models
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
If you don't want the top spool holder installation on the Ender-3 S1, print this filament guide for side spool holder.
Holder for analog caliper - if someone is still using these like me :) Držák na starou dobrou analogovou šupléru (posuvné měřítko - abych nebyl bývalými učiteli trestán :D ) Print instructions Default settings are completely OK for this…
See original design.
Rhode Island, USA (RI) Topographic Relief Map with Rivers and Coastal Waters Rhode Island, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Modeled after a 1977 Rhodes Mark 1 Stage 73 Piano hammer. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Infill: 100 Category: Music
A fast remix of the original with a cut making it possible to use a side spool holder
There was 7 wonder in the ancient world. One of them is the Colossus of Rhodes. It stood in the city, and build for the sungood, Apollo, after the failed siege of Demetrios Poliekretes. This is a modern reproduction of it, made for…
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
Print upright, support pegs 29mm x 5 bottle 60mm x 3 bottle 86mm x 1 bottle STL and step for pegs only so you can attach it to your own items in your own cad program
This is a pair of slanted holders for 11 wrenches in size 7 to 19 To attach the holder to the board the T-Nuts for Ikea Skadis Pegboards system from 6d6178 are used. The holders can be printed without support. The shown example was…
Lettres mobiles pour la méthode Décodi des éditions Retz, méthode d'enseignement de la lecture. Lettres issues du site officiel :…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
4 in 1 Filament Hub Upgrade for Anycubic Kobra 3 / S1 Combo – Skadis Mount spoolhoder Print flexible filaments like TPU effortlessly, without disconnecting your ACE Pro system! This upgrade is specially designed for the Anycubic Kobra S1…
Minis of the Gray Merchant of Asphodel. They get a paragraph in the Mythic Odysseys of Theros book. They aren't directly hostile just selling cursed items and jewelry stolen from graves an all they want in exchange is mundane goods or…
Holder for 8 ping pong rackets and 9 balls. It should fit any racket.
This is a replica Rhodesian A76 radio. This was created for the purpose of reenacting various conflicts and historic displays at events. The knobs are slightly undersized so they can fit into the "Top" plate and spin or be glued in place.…
Remix of the "Schleifschwamm-Halter" for Multiboard . You need two MultiConnect connectors, e.g. Multiconnect - Board connectors_Multiboard big, laying down , vertically.
An mount for using the RTK antenna on a pipe/mast holder with an inner diameter of 37.5–44.5 mm. Since in my case there was already a mast on the roof for various installations, it made sense to install the RTK antenna on the same mast.…
Model has height differences for manual color change. To make the size of each match better, scale up the y of Dey to 46.02 in slicer and x to 18, but keep z at 2.4.
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
for vent and/or cable cover, diameter 60mm and 106mm
This spool holder is designed to be just the right size for the mini spool. I highly recommend the mini spool, it snaps together so well and is just the right size for leftover bits of filament. you should print it lying on it's back with…
Note: This is my first time using Fusion360 and i do not know what i am really doing. I also included STEP file and the F3D file that I modified from the original post. STL is upside down, be sure rotate it so that the flat part is on the…
Just a fan work and a realization of an old dream I had when I was a kid to build a big 'ol army of spacefaring space nuns from 40k in the future. These sisters love battle, that's for sure! Seemed like most of the Adepta ladies you can…
I just removed the AAA battery box and the Low battery box part. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Notes: I scaled it by 105% to prevent jams.
A very basic model--the bushing that separates the damper rail from the action rail in a Rhodes piano. These should be printed in a high strength material that has self-lubricating properties such as PA or POM. It is possible to use PETG…
These are basic thread boards holders, of various sizes, suitable for Duncan Rhodes Paint Academy paints. These paint bottles are 24mm in diameter, so anything around there would fit. I've also made a similar set for the Citadel range of…
For better audio quality, I purchased a Rhode VideoMic for my GoPro Hero 10 Media Mod. The audio is definitely better, but the microphone is always in the picture due to the wide angle of the GoPro. I found the design of @flazer where he…
It is very, very tight, I had to drill a hole (see picture) just to let air out, now it won't came out, but that is ok for me. Printed with PETG 0.2
I just removed the AA battery box part. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Notes: I scaled it by 105% to prevent jams.
I was fixing up a ‘72 Fender Rhodes that was missing the cheek blocks, so I designed this model from scratch instead of buying reproduction blocks. I secured each block with a wood screw into the existing hole on the frame, and then…
A 3d printed insert to divide up in multiple sections a tin can, pringles can or any other type of regular cylinder with a bottom. This way the container can be used as a pencil holder or tool organizer. Parameters The scad project is…
Holder for digital caliper IKEA JERKER Desk Držák na plastovou šupléru (posuvné měřítko) (Stůl JERKER)
I found models of a few other Rhodes logos, but not the rear name plate. Mine was broken in half and mostly missing, so modeled up this replica. It's not perfect, the original has more of tapered edge from the text down to the base, while…
[EN] Toothbrush and toothpaste holder with a tooth as a decoration. The tooth is a model downloaded from https://www.printables.com/model/756487-teeth (that is why I do not publish the STL object in my model). Dimensions: 225 x 50 x 55 mm…
Not perfect, but adjusted the Ender 3 Pro main body and fan duct to fit the CR Touch and notch for the wiring harness.
This a model for the state flag of Rhode Island. No filament switcher is required for this model. Using manual layer change switching start with White, switch to Yellow at layer 16 then Blue at 19 (for 0.2mm layer height). See the…
Replacement for Rhode Video Microphone Pro flash/tripod mount. Made this as the thin brittle metal mount on the Rhode VideoMic Pro breaks easily. This is probably by design to prevent damage to the mic or camera but annoying nevertheless.…
Es gibt ein Modell des Hammerkörpers für Fender Rhodes. Dem fehlt aber das Gegenlager, das Kniegelenk, mit dem der Hammer am Holzrahmen befestigt wird. Aus PLA (Thermoplastisches Druckermaterial) hat das Modell genügend Elastizität, um…
Pi camera holder for ender 5. Lower front bar for better view. 4mm bolt and nut needed.
Make sure to use a strength preset for this tool. 0.4 works fine. This tool alone can rotate the pins if they are loose enough, otherwise, use it in combination with the pin wrench.
Prefer printing with 0,16- 0,2 layer height 15% infill ONLY USE TEALIGHT LED !!
No supports needed. 2x2 Gridfinity Tiles. Video about cool Gridfinity drawer solution on my channel: https://www.youtube.com/@luisengineering
Make sure to print the pickup up, a bit of support is needed. 0.2 nozzle is recommended but 0.4 works too. I don't recommend PLA as it gets brittle over time.
i made this with fusion 360
Žáci 2. stupně vytvoří modely kostek pro žáky na prvním stupni. Spolupráce a komunikace je nezbytná mezi žáky a učiteli na 2. stupni, žáky a učiteli na 1. stupni, učiteli na 1. a 2. stupni navzájem.
With holder for control box and USB-slot Category: Audio
Hier ein Ständer, ein Schild unf ein Stift zum 3D drucken als Schild für den UNterricht
Dárek pro kamarádku do nové pergoly jsem vymyslel Pohárekpochoden kdy po vložení ze zhora led čajové svíčky krásně svítí ve tmě tisknuto z PLA filamentu bez podpěr
Zum darstellen der Projektionsmethoden. Perfekt um Azubis zu erklären wo welche Darstellung hin kommt.
This version is of two halves, which can be glued together after fitting. Use a spiral drill to widen the hole if necessary.
organizer for kathode from plasma cutter
Fourth iteration of my attempt to print a replacement rubber part that fits easily into the original metal. 100% better than the 50 year old brittle dried up rubber. :-) “original replacement” was in my opinion a ridiculously expensive…
How to assemble: Slide two fasteners and PTFE holder on the rail and install in the spoolholder. Tighten fasteners on sides so the rail can't move. Tighten PTFE holder in the midddle. Install PTFE tube and funnel
This is my phone holder. You can also charge your phone on the holder. I would appreciate a review.
while removing my fridge door side holder broken hence i designed it and now its fitted exactly original one Print Settings Printer: anet a8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: while removing my fridge door side…
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
This print holds a USB-C Cable, a Lightning Cable, and an Apple Watch Charging Puck I stuck mine to the side of my PC to charge my apple watch iPhone and airpods.
Pomůcka slouží k větší názornosti při vysvětlování učiva sčítání a odčítání čísel s přechodem přes desítku. Dále je možno pomůcku použít i k vysvětlení násobení.
My beat up old suitcase was missing both of these cups on top of the suitcase, it made aligning the piano on top a bit more difficult and the sustain pedal wasn't always aligned. One of my holes was deeper than the other, but the bumper…
This bushing sits in the hole on the bottom of the suitcase piano, this is different than the one found on the stage piano. I'm honestly not positive it's the perfect design as I never had my original, I worry the sustain block might get…
This bushing sits on the top of the suitcase speaker box around the push rod that connects to the pedal itself. Mine worked fine without it, but is definitely a bit smoother with slightly quieter action with this installed.
The sphere radii come from the Wikipedia page for ionic radii: Li+, Ni/Co 3+, O2-. There are two versions of the model: 1 is a single hexagonal unit cell, as a complete unit cell (for a multi-color print) or as individual spheres and a…
The official coaster and logo of RIBTC, Rhode Island Bitcoiners! We are small but mighty
Kleine Dose, um Gummis für feste Zahnspangen aufzubewahren. So kompakt, wie eben möglich. Druckempfehlung: Material: PETG Infill: 25% (dann ist sie ausreichend stabil). A tiny container designed to carry elastics/rubber bands for fixed…
Helios standing over the harbour of Rhodes, printed as one solid piece. The pedestal is laid up in stone courses with mooring blocks at the corners. Bare legs show below a fluted chiton, the torso is modelled, and the bearded head wears a…
I printed the model with PETG and used 10 outside layer and 30% infill. For the assembly you will need: 2 hexagon socket screw M6 x 60 mm 2 M6 screw nut 4 M4 threaded inserts 4 M4 x 16mm countersunk head bolt
It is very, very tight, I had to drill a hole (see picture) just to let air out, now it won't came out, but that is ok for me. Printed with PETG 0.2
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
Prefer printing with 0,16- 0,2 layer height 15% infill ONLY USE TEALIGHT LED !!
This is my phone holder. You can also charge your phone on the holder. I would appreciate a review.
How to assemble: Slide two fasteners and PTFE holder on the rail and install in the spoolholder. Tighten fasteners on sides so the rail can't move. Tighten PTFE holder in the midddle. Install PTFE tube and funnel
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.449, 28.226 (LatLng) . It…
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.446, 28.226 (LatLng) . It…