36 models
Problem ist, meine Brauchwasserwärmepumpe Bosch5000DW baugleich Buderus WPT200.4 AS ist Photovoltaik-Ready. Was immer das heist? Den wenn ich diesen Kontakt schließe erhöht sich nur die Soll-Temperatur auf einen Eingestellten wert.…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
Printed with Prusament PETG Jet Black/Orange 0.3mm no rafts or supports required. I added a text file for the configuration in ESPhome.
The enclosure contains a buck converter and an esp32-cam. All the necessary parts you can see in the photo below. You can use any DC-DC buck converter up to 20x16x4mm and 5V or 3.3V output. There is enough room in the case for a small…
Minimalist DIN rail / screwable mount for HomeAssistant Green server.
Remixed to accommodate the Arlington DVFR1W-1 electrical box and split for an Ender 3 bed size
This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…
Case for a 2.9 Waveshare eink screen using a NodeMCU - displaying live data from Home Assistant. Code will be posted on github - at the moment it can be found via the Home Assistant Community Forum under eink (…
Printed with Prusament PETG Jet Black/White 0.2mm no rafts or supports required. How to print the numbered keycaps: Print the number first without a skirt. Leave the print on the printbed. Set Z-hop to be 0.5mm. Print the corresponding…
Remixed for devices with external aerial Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: ANy PLA Black Category: Computer
Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…
This is a CC2531 cover with HomeAssistant logo, based on the CC2531 Zigbee dongle Case by hansaya Print Settings Printer: Anet A2 - Modified Rafts: No Supports: No Category: Gadgets
After printing i removed midle support X things with calipers or you coud delet them in your slicer. Top Plate for Switchces is sturdy as hell without them. esphome: name: buttonpad-v2 friendly_name: ButtonPad-V2 on_boot: priority: -10…
This is a small USB powered speaker designed to run ESPHome and link to HomeAssistant. I use it to play rain sounds as a sleep aid and it triggers automatically by automation. The ESPHome YAML file provided allows for a timeout to be set…
HomeAssistant keychains on both new and old logo
This key ring for the holyiot beacon improves the original case, which is difficult to close. It also gives a personal touch with the logo of our favorite home automation hub. I recommend printing in PETG, as PLA will be too brittle to…
I made this for my Voron 2.4 printer since I did not want to be poisoned by fumes. My printer sits in the same room I am working, so this is the solution I settled on: I build a cabinet (from furniture panels) with slide out printer…
Homeassistant allows integrating electricity monitoring inside its home automation platform. Homeassistant glow allows energy monitoring using the count LED present on many consumer meters in the UK and Europe. This requires a photodiode…
I wanted a fiament guide that included a filament sensor. But, I wanted it to interact with my HomeAssistant / Octoprint setup so I could get notifications via HA and get better control. Also my raspberry pi isn't that close to my printer…
Overview A quiet air purifier that can be automated to run at full speed when there is nobody in the room. Uses MERV11 Filters and Arctic P12 Completely silent when at 40% fan speed while still moving quiet a bit of air. Integrates with…
3D printed wall mount designed for my Home Assistant dashboard setup , which runs on an old Lenovo tablet (Lenovo TB-X304F) using the Fully Kiosk Browser app. The mount allows you to easily place your tablet on the wall and use it as a…
This tray has been modified to allow mounting of the HomeAssistant Yellow board without screws, just pegs. Used for the great modular rack project. There are two variations, one with vents and one without.
This is a simpler version of the Home Assistant connected Magic Clock https://www.printables.com/model/1224639-magic-clock Instead of an actual clock hand controlled by a servo this model has room for a esp32-2431S028 (or CYD - cheap…
I needed to clean up my networking rack after porting my Adguard service from my HomeAssistant instance to 2 RPi 4s, and decided to add some nice-to-haves to the rack. Overview Beelink Mount Fits Beelink SEI-series mini PCs 3 keystone…
PCB upgrades and holes you may need... friends who do this kind of work can include them in the box themselves
Prusa Core One with 0.4 HF nozzle, 0.2mm layers, 15% infill
Enclosure for HomeAssistant Voice Preview with place for 2"-2,75" 4ohm speaker. SpeakerPlate is meant for LG Woofer Speaker EAB65148201 Cylinder113 is for mostly every other 2" speaker You only need: 4x M3 LockNuts for side inserts of…
If you ever read or saw Harry Potter, you may remember the Weasley Family's magic clock that showed the whereabouts of all family members. And of course you wanted something like that, too. Good News : I built one and can share my work…
A usb powered infrared hub for receiving and transmitting IR codes from homeassistant to make your dumb IR devices controllable from your smart home or to use an IR remote for controlling your smart home devices. Top of the case has space…
Switch for switching loads such as an espresso machine (that's what I made it for). I have an automation that turns the machine on in the morning, and off 2 hours later. Made for these parts: ESP32C3 supermini board such as this Relay…
This is an updated version of the great case (v2) by Ioannis: I tried to keep all design choices as they were intended (snap fit mechanism, enclosed design, ventilation, usb-c power) and only updated it to work with 7" touch displays…
Parts required: 5x Buttons 12mm 1x ESP8266 Printing Instructions: printed with PLA Part_1 support needed 15% infill 0.1 - 0.2 mm layer height
I needed to clean up my networking rack after porting my Adguard service from my HomeAssistant instance to 2 RPi 4s, and decided to add some nice-to-haves to the rack. Overview Beelink Mount Fits Beelink SEI-series mini PCs 3 keystone…
Enclosure for HomeAssistant Voice Preview with place for 2"-2,75" 4ohm speaker. SpeakerPlate is meant for LG Woofer Speaker EAB65148201 Cylinder113 is for mostly every other 2" speaker You only need: 4x M3 LockNuts for side inserts of…
Printed with Prusament PETG Jet Black/Orange 0.3mm no rafts or supports required. I added a text file for the configuration in ESPhome.
