1,732 models
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly. I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole…
Since I don’t have space for a standard spool holder and even for any vertical spool holder, i have used or rather tried to use horizontal spool holders. I have used multiple types from this website. E.g. i have used this one:…
Need (2x) Rubber Bands. ASA recommended for UV resistance. One Size Fits All!
Layer height : 0.2mm. 0.3mm may work too but will likely reduce strength. Print with supports , but block them on the top chamfer if needed. May be able to block the supports on the plug access too. The supports will be a pain to remove…
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
This is a cookie cutter with sharp edges for royal icing decorating. I think it looks nice at valentine's day to have many different heart shapes to pick from.
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
This DeWalt 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. Other battery…
This stand can be used to set up the Playstation (disc version) horizontally. I have remixed the original model.
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
Pre-cut for printing without support or in one piece.
The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.
Pre-cut for printing without support or in one piece.
This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attach a wide filament spool to the side of…
Print it and snap it together Original size for MK3 https://www.printables.com/cs/model/229447-playstation-5-ps5-horizontal-stand 28.12.22 Added No Logo version 27.12.22 Added better joint for snap (preview image is with old joint)
Introducing the indominable Tallneck from Horizon Zero Dawn! This machine is to scale with the official board game and stands on an incredible 150mm base. It has been split into many easily printed parts that come together without any…
Pre-cut for printing without support or in one piece.
Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Pre-cut for printing without support or in one piece.
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
I needed to store small hardware, but was limited on vertical space. This design is fully parametric and can be added to any spool based on the height, diameter, and the number of drawers needed. The STL files included are for a 12 drawer…
Introducing the Watcher from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 10mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
VÍDEO DEL PROYECTO:
It's a recreation of a Tenex 300 series tape dispenser. I used a 20mm wide metal tape cutter blade from another old dispenser. The top half can just be pressed on the bottom half and you could fill the holes with sand if you want to make…
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
Introducing the Stormbird from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 120mm base. Use with the Stormbird expansion during gameplay for the landed stance. It is broken up into smaller…
after an insightful comment from @Bischi_244918 i've remixed my tape dispenser to fit on a 2x4 Gridfinity grid.
I was unhappy with the available solutions, so I designed a new adapter to attach to the dock. It replaces the backplate of the Dock and clips in. The Dock can be flipped up to access the cable connections. This adapter is useful if you…
Remix of https://www.printables.com/model/137697-ssr-din-rail-mount to mount SSR from Rat Rig kit horizontally.
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
I needed a holder to hold my paintbrushes horizontally and not on the wall. Couldn't find an existing one so made this. Included the STEP files and print files in case you want to modify it at all.
Introducing the Ravager from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base attached. If you have already hunted this machine you…
Simple model I use to test my horizontal expansion settings as used in
Introducing the ultimate hunt, the Slitherfang from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, more easily printed parts that come together…
I designed a dodecahedron with bluntly rounded points extruded from each face using Fusion360. Inspired by the Star Fragment items in Animal Crossing: New Horizons, they look great in a silk or glow-in-the-dark filament! It prints great…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
Precision Horizontal Level Key chain This is a high precision alternative to spirit level. It's small, compact and can be attached to your key chain. The level requires a 7mm steel ball bearing. If you built the Prusa printer yourself,…
Make your Switch 2 fit inside your TV rack! A Nintendo Switch 2 horizontal dock stand with anti slide features. The stand gently holds the dock in place, see red arrows on photo. Possibility to add 12 mm rubber legs underneath the stand.…
An updated side spool holder that I did for the X1. This one is 10mm shorter and the filament feed hole is 20mm lower, making it feed a little easier. Designed to fit the P1P, with a 90-degree mount for the connecting coupling. I printed…
Add the gentle giants from the Forbidden West! This machine is to scale with the official board game and stands on a 80mm base. I printed attached to the base for stability but a detached version is also available. Note that the tail dips…
Unleash Your Nintendo Switch 2's Potential with This Horizontal Dock Stand! Just got your brand-new Nintendo Switch 2? Maximize your gaming space and show off that stunning 4K-capable dock with this custom-designed horizontal stand!…
Introducing the Snapmawfrom Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
You can use this stand to keep your iPad air 2 at vertical or horizontal as per the pictures.
Horizontal version of Daniel Josvai's tilted display stand for lightsaber hilt at https://www.printables.com/model/15505-tilted-display-stand-for-lightsaber-hilt . The attached photo shows the horizontal stand with Josvai's Obi-Wan Kenobi…
Introducing the Behemoth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Horizontal Magsafe and AppleWatch Stand This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17. All cable cutouts fit both USB-A and USB-C…
Update : Added a “true scale” version to video game scale and all the other machines here, instead of the official board game's (which is much, much larger). If you aren't trying to match the SFG board game pieces I would recommend…
Introducing the Stalker from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 50mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Here is one of the first machines we saw in the forbidden west, the Burrower! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece (with the base) for stability. All…
Introducing the Grazer from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Version 2.0 Changelog A new rulebook, much more in depth, has now been released, including some rule changes and updates. A free companion app (credit to makermike99) is now available to help you keep track of everything during your…
This model is compatible with the lego system.
Introducing the Corruptors from Horizon Zero Dawn, now with removeable components! These machines are to scale with the official board game and stand on an 80mm base. They are intended for all pieces to be printed separately and connected…
This model is compatible with the lego system.
Introducing the Strider from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. Note that the newest version…
Introducing the Shellwalker from Horizon Zero Dawn, now with removeable components! This machine is to scale with the official board game and stands on a 60mm base. It is intended for all pieces to be printed separately and connected…
modified the original files to fit tighter to the PS5, and increased the strength of the hooks. Also added a larger hook to the back side of the right side. Added a 3mf file where they both fit on the print bed together on the MK4 or MK3…
Introducing the Scrapper from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Glinthawks are easily the most annoying machines. But someone has to clean up all the scrapped watchers, so I guess I'm thankful for them anyways. This machine is to scale with the official board game and stands on a 30mm base. It is…
Introducing the Fireclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 100mm base. Use with the Fireclaw expansion during gameplay for the 4-legged stance. It is intended to be printed in…
Horizontal stand for PS5 Slim Disc version...
Scroungers call in reinforcements to take down careless hunters. Two poses are available, one stalking its prey and the other sending out an alert. These machines are to scale with the official board game and stand on 40mm bases. It is…
This model is compatible with the lego system.
Introducing the Longleg from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Oh Deer! The Fanghorn is here! I'm not sure what purpose the flaming antlers serve, but it's one of my favorite machines anyways. This machine is to scale with the official board game and stands on a 30mm base. It is intended to be…
Hello everyone! I would to share with you my idea for placing Switch's dock horizontally. It's good idea, if your Switch is placed in some low TV cabinet. I also designed anti-slip feet printed out from flexi filament, whitch help keep…
Horizontal stand for PS5 Slim Digital version...
Introducing the Trampler from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
This is my quick remix for an original design. Printed material PETG Nozzle 0.4 Layer height 0.3
English: This Spool Holder was inspired by the Horizontal Side Filament Holder by CdRsKuLL, which was one of the first models I printed on my X1 Carbon. But for the most common filament types I always use big Spools, so I changed the…
Introducing the Lancehorn from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Introducing the Rockbreaker from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 120mm base. The body keys into the base for easy assembly. It is intended to be printed in one piece with the base…
Introducing the Broadhead from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Introducing the Red Eye Watcher from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 10mm base. It is intended to be printed in one piece with the base attached for stability. All credit for…
Simple/robust card holder for two credit-card sized badges. We use those in our biology lab to open doors and fridges. They are sturdy, hold the card securely and allow the card to be swapped very easily. The small gap between the two…
The Tideripper is one of the most iconic machines of the forbidden west. While truly at home in the oceans, this machine is surprisingly agile on land. Really more than it should be. In any case, this sea monster is one of the biggest…
This bracket is made to hang M18 batterypacks on Your workshop/garage wall. Due to horizontal orientation batteries can be easly slided in. You can also easly check actual energy level, the display is in front of Your eyes. Credits to @…
I've recently finished my screen accurate Graflex lightsaber project. This is one of the two display stands that I designed for the lightsaber. It has a traditional horizontal build with a structure inspired by the grips on the side of…
Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
Introducing the Charger from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. The extra supports on the…
A wall mount I designed for the Lego Saturn V I decided to make this, because all other mounts I found were either vertical, or mounted the rocket in one piece. The printed pieces are mounted to a 18mm wood panel, which is stained dark…
Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…
Wanted the original stand to be a bit higher, so I have altered a bit.
This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17. Require glue to keep parts together (superglue is fine). Compatible with all iPhones…
[UPDATE July 19, 2024]: Added a horizontal version. In my job I have always to carry my company badge and Yubikey around, but I don't like to have them dangling separatly on my lanyard. So I designed a badgeholder, which can safely hold…
Replace the cardboard token with a sculpted one for an extra bit of realism in your Horizon campaigns.
Created a gun stand designed for a shelf. 2 versions available: split and solid. Solid version is meant to be printed standing, while the split one is for horizontal printing. Split will have better details and print time but worse base…
A battery tray to securely hold the stock battery (Spektrum S3 2200mAh) in the battery compartment of the Carbon Cub S2 1.3m RC airplane.
