482 models
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
Print approx. €36.53–€44.65 excl. taxPreliminary estimate for one variant
Wird das iPhone geladen und liegt quer hat man einen prima Wecker am Bett. Um dies bequem zu realisieren habe ich diesen Ständer mit integriertem Kabelhalter designed. Mein iPhone ist in dieser Hülle . Gedruckt in PETG, Düse 0,6 mm, layer…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET
A small and modern stand for the Garmin Venu 2 smartwatch. I have made the model Specifically for the 45mm version of the watch. At the bottom of the stand, the charging cable can be threaded in, and attached by the clip on the side. You…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
Two small bookends with Voronoi Pattern.
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Stable Triple Watchstand for wrist watches. Printed on the Prusa mini in Mat Black PLA. Both STL. and g-code attached
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
This is the wall cup / door frame socket / anchor (they seem to go by different names) that the child / pet gate slots into. We purchased a Northstates Toddleroo Supergate Explorer which comes with 4 wall cups and 4 self adhesive pads to…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Dual antenna mount for the Vannystyle frame. Meant to be used with the Truerc Matchstick 65mm version. .f3d is included so feel free to remix!
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
This is my take on the mn rebel alliance. There are lots of similar models and logos out there. I wanted bigger laser eyes and the North Star so I used tinkercad and used some .svg files created in vcs. I attached the .stl for those of us…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
Halter für Schneidebretter / Frühstücksbretter. Kein Umfallen oder wegrutschen mehr.
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for one variant
Adventskranz Weihnachstbaum mit Kerzenhalter. Das Modell besteht aus drei Teilen und kann zum Aufbau einfach zusammen gesteckt werden. Advent wreath Christmas tree with candle holder. The model consists of three parts and can be easily…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Die Konstruktion kann an einer Duschstange mit 25mm Durchmesser angebracht werden und verhindert das Abrutschen der Handbrause bei nasser Duschstange. english: The design can be attached to a 25mm diameter shower rod and prevents the hand…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
Single Letters A to Z / Einzel Buchstaben A - Z [Arial] Scaleable Here Numbers >
Printing instructions Deathstroke comes in two pieces: a main bust part, and a base part, to be printed separately. FDM This one is an easy one on FDM printers. No supports required for either part! Resin As usual this one comes…
Printed in PETG for strength but may be usable in PLA. Requires a small elastic band, I used a 1mm thick 40mm diameter band. Fires small safety matchsticks, the attached 3D printable match STLs or similar size projectiles. Ensure you only…
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
— Handle With Care --- Introduction: Discover the thrill of launching matches with precision using my innovative 3D printed matchstick shooter. Crafted for safety and excitement, this print-in-place model guarantees endless fun for…
Print on Prusa MMU Everybody needs a Hearthstone. Stone Filament: https://smile.amazon.com/ZIRO-Printer-Filament-1-75mm-Marble/dp/B01IIAC2MW/ref=sr_1_2?ie=UTF8&qid=1521210609&sr=8-2&keywords=ziro+pla&sa-no-redirect=1 Teal Blue Filament:…
A like and/or follow costs nothing, just like the 3D model! Thank you 🤗 Repeating Matchstick Gun Full printable functional Toy. It shoots 4 matches quick in a row with Pump action to reload. You need just a rubber band and a piece of…
I have a new AD5x printer and found a 24vdc LED JST-XH port on the main board. I also had a couple of Daylight on a Matchstick pcb lights. I designed some slip in mounts to screw to the PCB lights and snap into the side rails of the…
V 1.1 28. Feb. 2024: The katana has been extracted into a new set to meet the new license requirements V1.0, 26. Jan. 2024: first release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is…
Um an den Dachstangen ein wenig Deko und eine Lichterkette zu befestigen, habe ich diese Haken entwickelt. Die Modelle sind alle zweimal zum Download vorhanden, einmal mit Beschriftung und einmal ohne. Ich kann die Dinger kaum…
A watchstrap for Mi Band 5. The watchstrap thickness is 0.6mm, 3 layers if printed with 0.2 resolution. It's 7g lighter than the original. I also added the 3d model files (.ipt & .step) if you want to remix it or change some measures.…
Update 2022-01-16 Making Of Video with FX: Parts for my Death Star Bay 327 Diorama. I build this to show my Star Wars Spaceship Models in the right place. The base case is made from 10mm waterproof plywood. Lighted Spacedoor ring i cut…
Simple clip-on powerstrip holder. Fast and easy to print, use a single 3 or 4mm screw for mounting. Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach. Files: standard-Version = tight fit; powerclip_l =…
So many people have suggested these masks would be great for Paint ball and or airsoft ; ) I quite agree, so what better than one with a little attitude. Another evening of trialling modeling free hand, which I'm starting to really enjoy…
Key from serial and comics Locke & Key
Starwars Deathstar nigh lamp with RGB LED. There is no hole in the Deathstar for the 8mm LED just in case you want to use the model somehow different or put the LED somewhere else. Just drill the 8mm hole ;)
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
just insert wick, snap together, i recommend you use a clamp to hold together, place upside down (wick facing down) pour candlewax into hole Sell my prints commercially by joining my Patreon Join my Patreon to gain access and commercial…
Replica of the box from Hearthstone. If you add hinges it can be used as an extremely handsome container. The photos shows the prop after the printed pieces have been glued together, seams filled, sanded, and painted. We filmed a video on…
Schöne, gut lesbare Buchstaben für allerlei Projekte
Another awesome model from Pepakura.com Unfortunately there was no reference to the original modeller, so no credit available. Please note the sizing will need to be checked to suit your needs and since I have upgraded to a Crealty CR-10…
DeathStroke Inspired Helmet Enjoy Category: 3D Printing
Dieses Modell bietet eine Kollektion von Buchstaben und Zahlen im 3D-Druck, die aus zwei Teilen bestehen: einem schwarzen Grundkörper und einer weißen Abdeckung. Die Abdeckung kann mit LEDs hinterleuchtet werden, was einen besonderen…
20cm mech, articulated For PERSONAL USE For commercial license , subscribe to Patreon 7$ https://www.patreon.com/c/KmechToys
Introducing the Deathstar twist fidget, remixed from the original model by tato_713 found here https://www.printables.com/model/57266-death-star-scaled-one-in-two-million A huge thank you to Tato_713 for allowing me the use of his…
You should use M3 heat inserts with an height of 3mm heat inserty like these ones: Heat inserts M3x3 OD: 4,6mm
To wear it on keys just scale it down to like 25-30% in slicer Updated version: V2: The ring is pushed more down into that model so it won't break so easily V3: The hole for the key ring is directly inside the hearthstone itself so there…
Fortnite DeathStroke Inspired Sword Enjoy I don't mind if you make and sell my models that's fine, But this can Not be tolerated. If you have a etsy account please leave some negative feedback on this guy.…
Positive and negative shape template for your Christmas elf (Elf on the shelf). Both stencils are available with or without a handle to make it easier to pick up from the surface. At 100% scaling, the gnome is approx. 7.5 cm tall. It can…
Es sind die Innenseiten der verlinkten Buchstaben, nur etwas modifiziert, damit sie etwas stabiler sind und sich meiner Meinung nach das Licht besser verteilt. Viel Spaß beim Drucken und Basteln ;)
I recommend to print both bowls with the flat side down. You may need to sand the posts on the “top disc and posts” STL because they will probably be a tight fit. I modeled the magsafe charger plate to fit this one: https://a.co/d/8yQnzZa
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Meshmixer) Category: Buildings & Structures
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
This is a remix of chirpy2605's Daylight on a Matchstick LED strip mounts for the Voron v0.x line of printers. The original uses a snap-in design, whereas this remix uses M3 screws and nuts for a more rigid mounting solution. Installation…
this edition has no extra function this is just for the looks. E4 feels a bit like a final edition for me, it feels ergonomic with the texture. and rounded shapes for when you hold the magwell. So I removed the other designs at this…
English Wall mount for a power strip. The same model for both sides. Easy print design. No Support. One modled to fit the shape of the power strip and one rectangular. Printed with 3 perimeters and no supports. Back is shaped for easy…
When assembling in to the bottom I put some of my failed castings, some rusty washers and nuts for he weight, and sealed with the lid (maybie sand would better). After that simply glue together, I used a gluegun for that. I printed the…
Hey! To put my new LSX II's a little higher on my desk, I've tried to recreate a look-a-like to the original stands from KEF. The speakers are 10 degree tilted upwards. I've printed them with e-Sun ABS+ and connected them with an ¼ screw…
DeathStroke Arkham Knight Inspired Helmet Enjoy Category: 3D Printing
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
Der Halter besitz eine kleine Kerbe, damit die Schale nicht verrutschen kann.
360° Drehteller, Drehständer, Drehplatform, Fotografie, manuell oder elektrisch mit Hintergrund Habe hier einen drehenden Teller für Fotografie oder 3D Scan gebaut. Der Hintergrund ist perfekt zum Fotografieren für Modelle. Passend dazu:…
added ''Z'' Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or…
Table saw pushstick, quickly drawn to fit my Prusa MK3 print bed. Original design found here Print instructions Category: Hand Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .6mm Nozzle, .4mm…
Official german traffic signs from 274-5 (5 km/h) up to 274-130 (130 km/h) in original size of 600 mm. You'll need a multicolor capable printer or use different element heights with filament change in between. At least 3 colors. The mf3…
Beim LMC Vivo 530 K habe ich das Problem, dass die hintere Umrissleuchte im weg ist, wenn man die Dachstangen der Wigo abstützen möchte. Ich habe das Teil in PETG mit 25% Infill als Gyroid gedruckt. Das sollte ausreichen, muss aber jeder…
I printet with PLA 0.2 mm Leyerheight. The fit of the inner Cylinder is tight, so you need to sand one half a bit down to remove the upper part easely.
DeathStroke Black Ops inspired Helmet Enjoy Category: 3D Printing
I proved the need for a push stick by taking a slice out of the one that came with the saw (see last picture). This left the original push stick with reduced contact area with the timber and a sharp point on the end. As this is a solid…
A remix of the Matchstick Diffusers to fit on to the bed of a Voron V0 (120mm x 120mm). The main body of the diffuser is split into two so they fit on the V0 or similar size bed. For the rest of the BOM, please refer to the original…
30 degree angled Top side mount for Maple Leaf Makers Matchstick diffuser. Placed sideways in the Top hat extrusion of a V0.2 and lights up the area downwards. cables can be tugged away in the extrusions. Use the matchstick diffuser and…
Damit Weihnachten noch schöner wird und der Tannenbaum noch mehr Landwirtschaft in sich hat! Zugegeben ist es keine Kugel, sondern eine Scheibe, aber mit Trecker ! Als Vorlage diente ein Claas Axion . Damit das ganze leichter zu drucken…
2023.10.24: Updated Colors since they were completely out of order. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap…
StarWars DEATHSTAR Light Up Book Ends! These are great bookends for my collections. Heavy enough to use with any books and glow with fitted area for standard tea light! 10" tall and 7" wide Enjoy and happy printing! Includes BOTH sides of…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
Deathstroke mask. You can scale the mask to fit your head. The file contains two parts for easier assembly.
This is a simple 2D Wallart of the iconic Deathstar from Starwars. Its a very easy print with no special requirements.
Praktische und passgenaue Duschablage für Duschstangen mit einem Durchmesser von 22mm (weit verbreitet). Dieses Modell bietet euch cleveren Stauraum für Duschgel, Shampoos, Seife und all die anderen Dinge direkt an der Duschstange.
Celebrate Valentines day by shooting these festive arrows with a miniature bow (love spell not included). This small toy bow and arrow is the perfect way to spread Valentines cheer. Shoot people at your own risk. Info on extra arrows below
simple bookend, without support, print in place
This is a shielded LED bar mount for Voron 0.2 and likely 0.1 for the affordable “Daylight on a matchstick v2.1 by RZT”. This has an additional switch. Original design can be found here:…
DeathStroke Rebirth Inspired Helmet Enjoy Category: 3D Printing
Cropper Tutor 90° HST High Stress Training Super Cropping Trainer para imprimir en pla, relleno del 100% to print in pla, 100% infill
I faced some problems with the overhangs printing the 100% scaled washstand in PETG, so I remixed it and I printed it (without supports). Print was done with a 0,6mm nozzle. Thanks to SubSite for this very nice design for the Dollhouse…
Another 45 RPM record adapter modeled after the second DeathStar from Star Wars. STL, 3MF, and STEP files included Enjoy! Edit: The walls on either side of the “trench” were really thin, so I've added an additional version with thicker…
for those who like the idea of a bigger charging handle. Category: Sport & Outdoors
PTFE-Schlauchstopfen : Welche PTFE-Größen können verwendet werden? min: 2mm max: 6mm Die Öffnung verläuft konisch. Instagram: 3d__cnc
Handy solution for outdoor camping or garden. It will leak until negative pressure builds up inside the bottle or you add a rubber ring.
Die Begrenzungsleuchte stört sich mit den Wigo Stützen. Meistens ist die Stütze genau da, wo die Lampe ist. Deswegen habe ich diese Halterung gemacht. Sie passt sehr gut über die Lampe und folgt der Kontur des Wohnwagens. Material = PETG…
Print at 0.08mm layer height for most detail. Works fine at 0.2mm layer height. I used a sharpie to color in the swirl, but you can also do it with a multicolor print.
This is my design of Master Spool with perfect mesh. Print instructions Category: 3D Printer Accessories Summary This is my design of Master Spool with perfect mesh. Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter…
this is purely a cosmetic chance. but it does make the middel part thinner. and is 2.60 mm longer. the assembly of this part is the same as the original. Category: Sport & Outdoors
Mit zwei dieser Haltern lässt sich eine handelsübliche Mehrfachsteckdose einfach an z.B. der Unterseite eines Schreibtisches festschrauben. Eine einfache Möglichkeit den Kabelsalat in den Griff zu bekommen.
Version für CH
A special edition commemorative coaster marking TK-1889's (pictured) blaster range passing score. An almost unheard of feat. Found only in finer Death Star canteens, and embossed with the official imperial emblem (to keep you thieving…
#ENGLISH# A set of interlocking spray stencils. Contains the letters A-Z,Ä,Ö,Ü,ß, the numbers 0-9 and the special characters ?!. The individual elements can be inserted into each other to form a word. There is also a “holder” so that you…
This is an alternative mount for Rainbow on a Matchstick for the V0.1. This mount: Hides the PCB completely Includes a diffuser that can be printed out of natural or white filament Snaps in and out of 1515 extrusions Printing Each of the…
An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here my solution , and need only some 12 gramms of Material ! and 4 screws diam 3mm No support Infill: minimal 15% better 20% or 25%…
Edited the original model, because it took too long to print, because of the internal cavity.
I created tiles with letters of the alphabet in two colour. Each tile for every letter of the alphabet. The tiles have a hole for a small wire to create a “Name chain” for Babies. I printed several for the newborn childs of my friends.…
eine einfach zu druckende Buchstütze...
I ordered a Brennenstuhl 8 port powerswitch off Amazon. It's supposed to go under my desk, but had no way of mounting it, since the package came with only one adapter plate (white in the photo). Printed in PETG with 3 walls and 30%…
Teile deine Botschaft über deine Schuhe! Diese Buchstaben passen auf normale Schnürsenkel (mit bissi Quetschen 😉)
This cover is secured using mounting hardware for the Daylight on a match stick LED. This helps protect from being blinded by the LEDs when looking at print jobs. Update 2025-11-13: Uploaded mounting bracket, I didn't model the Mounting…
I can’t test fit this but the main components are the same as the tested FGC-9 one so it should be alright… see the manual of the FGC-9 edition for the installation. for a big part will it be the same. there is a DC buttstock added. this…
![Letters / Buchstaben A - Z [Arial]](https://media.printables.com/media/prints/508862/images/4125632_264544e2-b4ee-4433-b530-e1a5cc626566/d8134d5c7b1872a084686efe5e8badde.jpg)
