Counting matching models…
DHT11 Sensor Case for AZ-Delivery DHT11 Optional bottom piece with mounting hole included. The two pieces are meant to be clued together. I'm currently working on snap-together pieces. Feel free to remix. Tolerances for the top piece are…
This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…
This is an enclosure for a DHT11 sensor module. The Sensor/PCB is held inside the case body by the post, and the lid is secured to the body using a flat or pan head M2x3 screw through the same post. Print Settings Printer Brand: Prusa…
Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…
Simple DHT11 housing with 3mm cablehole. Lid snaps in place, no glue needed. Print instructions Category: Electronics Summary Simple DHT11 housing with 3mm cablehole. Lid snaps in place, no glue needed. Print Settings Printer Brand: Prusa…
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…
Summary A case for a temperature and humidity sensor powered by an Arduino uno board. The case fits: an Arduino uno a small breadboard a 16x2 LCD display a DHT11 temperature and humidity sensor The parts are locked in place by melting the…
A simple and easy to print case for Chinese AHT20 sensor. max cable diameter : 6mm (¼ inch) The cable can be lock with a 2.5mm(1/10 inch) zip tie and they are a hange for a fixation zip tie on the top. The sensor fixation hole suit with a…
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
Here is a simple housing for the DHT11 temp and humidity sensor that is mountable using two #6 screws. Ideal for indoor applications or outdoor locations that are undercover as this is not a waterproof housing. Check out the assembly…
This little enclosure will hold an ESP32 and DHT22 snugly, for wifi climate monitoring in a nice small package. I recommend the vented, direct soldered lid. Even with the vents, if you use this without deep sleep or lower power mode, THE…
You can use this to make IoT devices , such as Tasmota devices or other IoT and Home Automations projects Hope this will help you
So I made this box that can hold in place an Arduino Uno, a breadboard, an LCD (16x2) and there is also room for a dht11 sensor on both sides to make it more convenient to assemble. The box was also designed keeping in mind room for…
ESP8266 and DHT12 Case
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
Case for Esp32 + PIR + DHT11 + RCWL-016 I use Espresense to detect presence by detecting the Bluetooth signal intensity of my devices. Additionally, it has a temperature sensor and two motion sensors, one with infrared waves and the other…
This is a remix I made to montior the temperature & humidity of my network cabinet using Home Assistant & ESP Home - It then triggers & automation to turn on fans to cool the cabient once a temperature threshold has been reached.
In the process of building 2 x V1 Lack enclosures, I decided that I wanted to incorporate temperature and humidity monitoring - as you do. While most people seem to go for fairly standard devices I wanted something that both logged the…
Einfaches Gehäuse für DHT11. Ichhabe es mit 0,15mm gedruckt, damit der umlaufende Snap-In gedruckt wird. (Im Slicer überprüfen, oder Kleber verwenden... :-) ) (DeepL) Simple housing for DHT11. I printed it with 0.15mm so that the…
Simple remix of nalanengine's base for the Wagner HT1000 heat gun. Great way to secure it when it's hot. The base simply slides onto the back end of the heat gun. The original is great, but its hollow base may be aesthetically pleasing…
DHT22 / DHT11 / AM2302 sensor mount. Mount using zip tie or screws. Category: Electronics
Simple sliding lid box that will hold the DHT11 temperature and humidity sensor securely with strain relief for the connector. There is a tabbed version for hanging and an untabbed version for sticking to things or just having a smaller…
Changes in this remix: larger hole so that jumper wires fit through removed mounting hole split into two parts
I created this pegboard holder so my heat gun would have a place to live. I used generative design to create the back portion of the holder. So far I have had no issues with the hot heat gun warming up the holder or pegboard. This fits a…
Simple remix to allow 1x3 DuPont connectors through the hole. The top available in the original model.
Simple DHT11/22 holder (stand). Print instructions Default settings will do.
ARCELI DHT11 Temperature & Humidity Module.STL
DHT11 Sensor Enclosure A minimalist and compact enclosure for the popular DHT11 temperature and humidity sensor. Provides basic mechanical protection while allowing free airflow for accurate measurements. 🔧 Key Features and Uses:…
Small outdoor mount for DHT11 temperature sensor. The sensor is to be held in place with double sided tape. I used transparent nail polish to waterproof the screws. Note: I have this mount outside exposed to the element for a year and the…
DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby
I resized the original model so that it fits my KAIWEETS HT118A multimeter, and also added a section to hold a 2nd set of probes with alligator clips. Thanks to blackjack220 for the original model. I printed it in SunLu Grass Green PLA+,…
The DHT11 case is a compact and durable enclosure designed to protect the DHT11 sensor from physical damage and environmental factors while maintaining optimal functionality. The case includes strategically placed ventilation openings to…
ESP-32S ESP-WROOM-32 PIR Dual relay DHT11 sensor case Category: DIY
A small enclosure to stand in the room to hold a 16x2 LCD a DHT11 and WEMOS D1 Mini in it. The right for size for a IOT infoscreen. Category: DIY
Enclosure / Connector for a DHT22 / DHT11 / AM2302 sensor. Included are two different methods of interfacing with the sensor: CAT5 Ethernet Keystone Jack Cable Category: Electronics
Assembly Instructions All of the parts are shown above along with three dupont wires The top must be attached to the bottom case - I used super glue Once they are glued the sensor can be slid in The wires can be connected before or after…
I bought some DHT11 modules from amazon that were a bit longer than the ones I could find holders for so made my own. The STL has two parts, a top and a bottom. The bottom could be left out if you didnt mount the unit to anything…
I did an scan of the original part and sketch the scan into a 3D model 6mm thickness to make the tool stronger. In thoery it shoud work in real life Edit. I change the 12.6 diameter to 12mm and reduced the 26.6 to 26 mm.
Ein Stützrohr für den wunderbaren Hydroponiktower MHT150 von TechnoVardo, das perfekt für den Ikea-Sortera-60-Liter-Behälter geeignet ist. Damit ich es auf meinem Drucker drucken kann, muss es dreiteilig sein, die beiden oberen Segmente…
Just small remix: Added a ear for my cable to hold. Moved the holding screw hole more to middle for my sensor. Removed the letters and legend from front cover. Adjusted the lid "ears" so they print on MK2S and its a snug fit now :) Print…
ESP32 devboard enclosure, big enough to keep the pins attached and use Dupont connectors to the ESP. The enclosure is designed for an ESP-32 Dev Kit C V4 like this one, but should also work with other boards of the same size, as the board…
This design is: A simple holder for DHT11 breakout boards. Designed to be mounted with a countersunk screw. No threaded inserts required - the single M3 screw threads directly into the holder. Able to be used commercially / sold (see…
I couldn't find a case to fit my DHT 11 Model in specific so I designed my own. I also added hole in the top whcih allow you to attach it to a keychain or mount it somewhere. The lid and case connect together with a snap-fit mechanism.…
The knife is rotated 45 degrees in the bin so that the top of the knife does not cross over into another grid. Place the butt of the knife into the bin. The folded blade cover should rest on the top of the bin to provide stability.
Also a remix of a Screen Cable Clip I made so without wires run behind it it will likely move freely on the rail. I put a piece of 1/2in foam tap on the back and that gave it enough grip to stay in place on the rail while still having…
DHT11 Clip-On Case For The Prusa I3 Mk3s+ I added Octoprint to my setup, along with a printer enclosure. I decided I wanted to monitor the temperature and humidity as well of my enclosure and have it on the Octoprint UI. To do this I used…
This is a case designed for the D1 Mini esp8266 board and DHT11 sensor. It was designed for the use as a smart sensor for home automation,specifically espHome and Home Assistant. Hardware: D1 Mini ESP8266 Board Digital Temp and Humidity…
This case can hold AHT10 sensor and the VMEL7700 light sensor. Connect it to ESPhome and a use it in my grow tent. Print with no supports. Lid and Body fits well.
ESP32-C3 DHT11 Weather Station Case – 3D Printed Enclosure This is a simple 3D printed enclosure for a DIY ESP32-C3 weather station using a DHT11 temperature and humidity sensor. The case was designed in FreeCAD and printed as part of my…
Temperaturmessstation Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Temperaturmessstation_34478d1d.html Und hier könnt ihr selber Platinen bestellen: https://www.pcbway.com/ Temperaturmessstation mit LCD,…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
So this is a 3d model that protects Esp-32 and DHT 11. This is for a project in school that i have.
My remix adds a pointed stake to the mounting bracket so the SensorPush HT1 Mount can stand in the ground inside our cold frame instead of mount to a surface. This worked great to track temp and humidity in our cold frame!
I created this case to fit my project with DidiSpark with DHT12 and a 0.91; OLED. More details are on https://www.hackster.io/yu-fan/digispark-thermostat-with-dht12-and-oled-74a692 Category: Electronics
Es un soporte para trabajar con el sensor DHT11 que nos sirve para trabajar y medir temperatura y humedad ambiente.
Summary D1 Mini & DHT11 Case Remix for USB-C connection Print Settings Rafts: No Supports: No Resolution: .2 Infill: 20
I added a small power switch in place of the vibra motor. It's intended to be very recessed to not be accidentally moved, even in a bag or when dropped. This is the switch on Amazon: https://a.co/d/0gSnlvK3 . clip off 4 of the 6 leads,…
ESP8266 Box This is a small box for your small temperature sensor! With the right software you can easily build your own wifi thermometer! You only need jumpers, an esp8266 and a dht sensor! Have fun rebuilding!
This is a compact enclosure for a simple ESP-01 (ESP8266) based weather station. It includes: a cutout for a DHT11 humidity/temperature sensor on the front, a cable passthrough for an external DS18B20 temperature sensor , and space for a…
ein Gehäuse für ein dht11 Sensor, arduino und knöpfe. Mit knöpfe meine ich diesen Sensor von amazon https://www.amazon.de/Berührungssensormodul-Kapazitive-Touch-Taste-4-kanalige-Elektrische/dp/B082LYCC6W/ref=sr_1_20
The Kaiweets HT112B multimeter has a parasitic battery drain problem when it's off. I modified it to run off a rechargeable lipo battery so that it can be easily recharged instead of having to change the coin batteries. Designed to be…
A soft top cover to transform this Stanley hammer into a rubber hammer. I printed this with the Flashforge Adventurer 5M Pro and filament TPU 98A (S-FLEX SKU:80521).
Redukce ventilátor 98mm na trubku HT110
This is a case for a DHT11 GPIO temperature and humidity sensor. Prints two different parts, attach with glue or tape.
I added holes for the LED's. You may get the back cover from original design page.
Combination of both the LED cutout and switch provision versions of the integral antenna model. This is the switch on Amazon: https://a.co/d/0gSnlvK3 . clip off 4 of the 6 leads, and shorten the other 2. needs a tiny drop of superglue to…
Makerworld +- Arduino Mega 2560: Makerworld https://amzn.to/4ruRVmK +- Pantalla TFT 2.4" Shield: https://amzn.to/4ushnMn +- Módulo RTC DS3231: https://amzn.to/3NdP8An +- Sensor DHT11: https://amzn.to/4djKsn0 +- Zumbador Activo (Buzzer):…
Průchodka do stolu pro potrubí HT110 a kabely od PC
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
The DHT11 case is a compact and durable enclosure designed to protect the DHT11 sensor from physical damage and environmental factors while maintaining optimal functionality. The case includes strategically placed ventilation openings to…
This case can hold AHT10 sensor and the VMEL7700 light sensor. Connect it to ESPhome and a use it in my grow tent. Print with no supports. Lid and Body fits well.
I couldn't find a case to fit my DHT 11 Model in specific so I designed my own. I also added hole in the top whcih allow you to attach it to a keychain or mount it somewhere. The lid and case connect together with a snap-fit mechanism.…
This Gridfinity 4x3 cradle is designed to store a staple gun based on the widely used Bosch HT14 form factor. The tool rests securely in a custom-shaped horizontal pocket , providing a clean and organized storage solution within your…
Housing from the AHT10 module for heated chamber printers Voron Design Klipper config [temperature_sensor chamber] sensor_type: AHT10 # PIN for BTT M8P i2c_software_scl_pin: PA8 i2c_software_sda_pin: PC9 i2c_address: 56 # Default is 56…
AHT10 Temperature+Humidity Sensor M2 screw on the back to hold sensor in place and hold front cover. 5mm hole for mounting screw/hanger/rope or double side tape on back. You can use tape or Zip Tie to secure wires. Category: 3D Printing
Hold AHT10 on 2020 extrusion A M2.5X4 screw to hold the board is needed.
Gridfinity Bin for the Kaiweets Multi meter - Model No HT118A or HT118E Storage for the leads under the meter when not in use Cutout for the leads Stoppers for the stand when the meter needs to placed at an angle Slots to rest the probes…
Wagner HT1000 Heat Gun Mount for use with the Multiboard System. Use these multiconnect connectors: https://makerworld.com/en/models/642696#profileId-632145
ESP-32S ESP-WROOM-32 PIR Dual relay DHT11 sensor case Category: DIY
This Gridfinity 4x3 cradle is designed to store a staple gun based on the widely used Bosch HT14 form factor. The tool rests securely in a custom-shaped horizontal pocket , providing a clean and organized storage solution within your…
Just a AHT10 case i designed for 3d printer temperature and humidity sensor in the enclosure. Lot of people download my models and dont say anything .. does not really inspire me to give away my work for free. Drop a make or a comment if…
A simple mount for an AHT10 sensor to mount on a din rail clip to monitor temps in electronics compartment. Its not the best but it does work well. I have included the Fusion file for any edits you would like to make. I assume this will…
Added pegs to the original holder so that it can be mounted to an Ikea Skadis board.
A smaller, more symmetrical version of my other HT1621 lcd case, You need to desolder or cut the right angle header pins on the lcd module, and solder on some 6 core wire, as shown in the 2nd photo (i used 8 core lan/network cable, using…
This is a case for the HT1621, 7 segment LCD's, Sold in the uk by Hoby Components for just £3.99. https://hobbycomponents.com/newproducts/1001-ht1621-6-digit-7-segment-lcd-module The hobby components web site has a forum with the arduino…
Customized version of https://www.thingiverse.com/thing:735213 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=735213 Instructions Using the following options: tube_diameter = 25.5 spool_diameter = 53…
