101 models
The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Adjusted to fit the Asiair Mini.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Introduction: I wanted a way of mounting my AAP to my tripod, and then I remembered I have a 3D printer! This clamp mount is a fairly simple, but a secure and effective way of relocating your ASIAir/Pro/Plus to a 1.75" diameter tripod leg…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
I liked this mount, but unfortunately it didn't fit for my ASIAir Plus, so I changed it slightly. Thank you!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Simple Halterung um den tp-link travel router (TL-WR902AC) am AsiAir Pro befestigen zu können. so hat man alles ordentlich beisammen und keine Probleme mehr mit der WLAN Reichweite. Prusa Mini+ Kein Support 0,25mm 4 Böden 4 Decken 2…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
That's a simple mount for my ASIAir Plus fit for tripod with 44mm diameter legs. It fits a bit tight, you can hear crackling sound when stretched, but nothing broke during few tests. Mount with device attached does not slide down on steel…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Infill: 20% Filament brand: Prusament Filament color: Black Filament material: PETG
Grue sur rail à l'échelle H0 pour le modélisme ferroviaire. La conception de cette grue va faire l'objet d'un article dans le numéro 108 de la revue Voie Libre . Je vous convie donc à vous la procurer si vous souhaitez de plus amples…
Verrière Intermédiaire à associer à 2 verrières d'Extrémité
Stampato in PLA, include modello monocolore
Pièces Communes aux deux modèles de verrières
spinning maxwell cat requirements: a single 6803 bearing(better to be 2rs) housings are as tight as possible,so it may need a bit of pressure i'll be thankful if you share your print pictures and advices to improve : )
Hi everybody, the SIAI Marchetti SF-260 is one of my favourite airplanes, unfortunately I couldn't find a STL to print a small one. That's why I spend last the few days with creating one in Fusion 360. It's not 100% detailed and exactly…
Remix of the great models of Pfelpensson & somtec (see source section below) The truck cabin was modified to airborne version of the GAZ66. The Zu23-2-canon is a fixed one with strengthening at some places, to be able to print. Sized for…
Pour pouvoir ajouter cette plage à mon décor, j'ai supprimé l'ancien pont ferroviaire et réduit une partie du relief, puis j'ai créé ce double viaduc. P.S. Le Tablier et les Arches sont une adaptation d'une réalisation qui n'est pas de…
Le fonctionnement de ce taquet est décrit dans la vidéo YouTube https://youtu.be/nB8tgzVN9ac
The ZWO ASIAir come with a Vixen-style finder foot attached to the side of the ASIAir body for easy attachment to Vixen-style finder bases. This is a 3D printed version which also fits to the Pegasus Astro Uranus Meteosensor or PowerBox…
Modèles 3D développés par Florian Kévin sous l'impulsion de Mahdi Chemkhi.
This bracket allows easy attachment of an ASIAIR Pro to your Dovetail plate. Specifically I have a William Optics ZenithStar Telescope bracket, but I believe all of the plates are identical. I printed on my Prusa Mini with the standard…
ZWO ASIAir Tripod Mount - ZWO TB40 Category: Hobby
This allows you to mount the clip onto the dovetail of your ASIAir and clip it to any 32mm diameter tripod leg. I'm sure there is wiggle room for larger diameter legs, within reason.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Grafaiai , Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
These tools can be used to fix the camshaft on MultiAir engines and the crankshaft on T-Jet and MultiAir. This makes it easier to replace the timing belt. There are two versions for the camshaft. The version without a pin allows you to…
Since I have made myself a dummy so I can make some wire holder/clamps or something like that, I thought hey, why not share it. Maybe some other people will make some awesome gadgets for it :) Credits: Antenna by Bieber Alexis…
Cucchiaio Superiore Forato per la presa di impronte negli studi odontoiatrici
What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…
Spare part for the Xiaomi vacuum cleaner brush. Drive gear for the HTD belt. I printed with PLA+, I don't know how long it will work ;). It fits tightly onto the axle - requires some persuasion ;)
This is an adapter/ mount to connect an ASIAir Plus and a travel router. I printed in PLA with the model at 90 degrees so that the legs stick out to the side. Organic supports were used.
I made this bracket to mount my Asiair Mini to one of the foam covered legs of my Manfrotto 055 Xprob tripod. It should also fit any tripod leg with a diameter of 35mm. I chose to use velcro straps to attach the bracket to the tripod, but…
TMA-1 are good sounding headphones, with their minimalistic look a great alternative for DJ headphones. Unfortunately (at least for the initial series) the headbands always broke. Luckily @gaspardbos has nice easy to print replacement…
Made an update to the old design and made a keychain version as well, not able to print this version because i don't have the colours needed and a MMU. Model needs MMU, colour separated by layers excluding Black No supports needed
This model was designed in OnShape All parts sliced with PrusaSlicer 0.20mm layer height with 0.4mm nozzle 15% cubic infill Print 2x strap pieces in TPU Print bracket in PLA To Assemble: - 4x M3 brass inserts to attach the TPU parts. - A…
Girl and Boy versions of cutaway Easter Egg with bunny candy shapes inside. On our printer it prints with no supports when, but if changing the scale or layer height it may need some.
A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…
The previous version worked for me for about 2 months. I made a modified project, where the gear wheel is secured with an m4 screw. The gear wheel has a socket for an M4 nut, the screw should be cut to approximately 10 mm, and a slot for…
This model was designed with OnShape. Bracket to hold a Samsung T1 (1Tb SSD) to the side of a ZWO ASIAir Pro Printed with TPU Sliced in PrusaSlicer at 0.2mm layer height, 0.4mm nozzle 15% cubic infill
Remix of AstroStock's 2pc Tripod Leg (51mm or 2in) Bracket to allow attaching the ASIAIR by it's dovetail for easier removal of the ASIAIR from the tripod leg. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No…
2 part ASIAIR holder, one part can be fixed with ducktape and the other part can be screwed on
Recommend printing in PETG, PLA will warp in the sun.
Background I got the Iain M Banks Culture drawings book for Christmas; I've loved the books for many years and I've modelled them in the past to build fan art ( http://www.fastness.co.uk/imb ) so I decided to do a project for printing…
conforme aux cotes fournie à l'origine à imprimer en PETG n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
With this model you have the possibility to make all the recolor you want.
For everyone, who wants to make some gadgets for their ASIair mini :) + share, if you have made some stuff for it :)
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
I have created/modified some tools for Katana, Wakizashi, Iaito, Shinken. The tools are based on the ideas of https://www.thingiverse.com/thing:3198623. The spacer/buffer prevents the nagasa and habaki (blade and brass collar) from being…
If you find my designs useful, please consider sending a tip ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like me, you're…
My RPi ASI POWER Clone board for Astronomy compatible with indi-asi-power driver on Stellarmate or Astroberry Wiring diagram and PCB on EesyEDA Web control interface for ASiair (RPi 3) version. on github This web interface can be used in…
A quick vertical stand for the AIAIAI X01 transmitter, as the horizontal layout was resulting in too much interference and taking too much space. Prints fine at normal print settings, 20% infill. Has enough resistance to stop it from…
0.20mm x 5 wall x 15% infill
- 60mm fan - 3mm heat set insert - use ABS or maybe PETG
Celebrate the momentous occasion of the World Youth Days 2023 in Lisbon and the much-anticipated visit of the Pope to Portugal with this commemorative keychain. This meticulously crafted 3D model captures the spirit of the event,…
USB and Power extension hub with ASiair Plus or Pro holder on telescope. Wining diagram and PCB on EasyEDA BOM 1x M4 x 35mm hex head screws 2x 2x6mm self-tapping screws 4x 2.5x4mm self-tapping screws 2x UNC 8#-32*1/2 screws (for 9.25" SCT…
Simple helper to hold VIAR trigger when filling large tires.
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube…
Since there weren't the right pads available and the acceptable ones were quite expensive i chose to use normal pads for ma TMA-2/TMA2 an. Here you can find the files for the conversion. The plugs are a bit tricky: 1) i would print them…
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100 . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like…
The source marked this model as adult content.
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four…
This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the…
Simple 3d Grafaiai. Would love to see it if you print!
this is a snap-on holder for the ASIAIR plus. it may also work for the pro or mini version. the hole in the middle is for a m10 zylinderhead screw. i mounted it on the holder for the dobsonian mount. print with petg 20% infill best wishes h
Bike Grip phone adapter for the Armoured case for Xiaiomi Note11
For 1 stand: x1 Base x2 Legs more info in: https://amiaire.org/
Layer 0,2/0,3 Tree auto support Brim auto (brim width 3,5); (gap 0,1) infil 15% Material: ABS p3d Orcaslicer Printer: v0.2 r1
Mini EQ direct USB cable for ASIAIR or Stellarmate BOM RS232 DB9 Male to RJ45 Female M/F Modular Adapter Connector Convertor Extender USB 2.0 to TTL UART Module PL2303 YP-01 2x 2x6mm self-tapping screws RJ45 Connector Phone Cable Line…
pour vos cadre 3d pied disponible ici: https://www.printables.com/model/1293719-pied-cadre-3d
Explorer Scientific ASIAir Mount that I created as I wanted to reuse the mount on my old ED127. I printed it in PETG to reduce the chance of sagging.
Clip de liaison pour barre d'attelage - Tow bar connector clip
tissue holder with hook for Octavia IV (2025)
Extension board for ASiair / StellarMate + Dew Heater Controller and Power Hub My extension PCB on EasyEDA Can be used for other popular RPi 3 or RPI 4 astronomy poject (Astroberry or IndigoSky) Source code on Github NOTICE I NOT HAVE ANY…
I've included my Fusion 360 .f3d file, so that you can adjust the size to that of whatever magnets you have or remove the cavity completely. You want to add a pause on the layer before the overhang that covers the magnet. The pause starts…
a small insert to help dampen vibration of Viair 380c compressor. Centre hole 3mm, washer needed to stop it from pulling out. tapered for snug fit, short base to minimise clearance height. printed in TPU 90 with 2 wall and 10% infill
I've been waiting so long for a model of the amazing OIIAI cat, so I made it! (With the help of Image to 3d). Comment if you are a fan too! OIIAI Cat facts: Her name is Ethel She is a munchkin cat (with short legs) She is blind and…
Clips for AIAIAI E08 Alcantara® leather earpads . They are primarily designed to secure leather that has peeled away from the plastic or to protect it from peeling. Secondarily, they serves as a stylish design element for the headphones.…
Kulturális és Vizuális Antropológiai Tanszék logója
PuffiAir Smart Air Quality Monitor – Enclosure (3D Printable Case) This is the official PuffiAir enclosure CAD design, created for users who want to 3D print and assemble their own smart air quality monitor. PuffiAir is capable of…
Multiboard Riiai DC 0-10V tester holder
ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. What it holds ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. The device is held by four corner posts only , with 5 mm of clear air along the middle of…
Organiseur de bureau personnalisable autonome avec un module de charge pouvant servir d'alimentation auxiliare de 3v-5v La lampe led s'allume en effleurant du doigt le dessus transparent pour activer le capteur sensitif Avec l'option…
This is an adapter to attach AIAIAI modular cans to an Oculus Quest 2 with a Chinese Elite Strap Knock off
This is a complete automated flat-panel project for the William Optics RedCat 51 II. The panel swings clear for imaging, closes as a dust cap, and provides dimmable neutral-white illumination for flat calibration frames. An ASIAIR Plus…
Two models, one with 1/4 hole and one for cold shoe mount of AIAIAI Transmitter X03
Need to be glued against the backpart but then it works perfectly fine.
Simple vase design playing around with the max print angle of a Mk4. The idea is that you print the outer frame and inner vertically - the 6 inserts (shown in yellow in the exploded pic) horizontally I might improve the detail in time to…
Print as you normally would. I used PETG, but PLA would be fine. .015 mm Balanced with .40 nozzle
These tools can be used to fix the camshaft on MultiAir engines and the crankshaft on T-Jet and MultiAir. This makes it easier to replace the timing belt. There are two versions for the camshaft. The version without a pin allows you to…
3D printable topographic miniature of Anykščiai - 🇱🇹 Lithuania Capture the beauty of Anykščiai 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 55.526, 25.106…
3D printable topographic miniature of Anykščiai - 🇱🇹 Lithuania Capture the beauty of Anykščiai 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 55.526, 25.106…
Background I got the Iain M Banks Culture drawings book for Christmas; I've loved the books for many years and I've modelled them in the past to build fan art ( http://www.fastness.co.uk/imb ) so I decided to do a project for printing…
A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…
This accessory plate uses the M4 holes on the side of ZWO ASIAIR Plus. It provides three ways of organizing cables and mounting accessories: using M4 holes in 20mm raster. These holes have chamfers for the flat head of M4 DIN 7991 screws…
3D printable topographic miniature of Šiauliai - 🇱🇹 Lithuania Capture the beauty of Šiauliai 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 55.934, 23.316…
3D printable topographic miniature of Anykščiai - 🇱🇹 Lithuania Capture the beauty of Anykščiai 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 55.526, 25.106…
![Suspended "Limiting Factor" [V2] (from Iain M Banks Culture novel "The Player of Games")](https://media.printables.com/media/prints/f23a6d49-d7a7-4145-8905-d7e7cba57f81/images/9548616_478b5cb7-8ffa-4769-b9fb-ba279403ecba_4c52eeb6-c648-4507-b42b-e15c1bd569bb/pxl_20250420_152159892.jpg)
