LayersFactory

Search results: ib

Sort order

33,317 models

P
PrintablesGabbox3D

Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test)

The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…

Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant

Downloads
96,642
Likes
12,661
Rating
4.89
Order a print of this model
P
Printablesyahbluez

Stress Free First Layer calibration in less than 5 Minutes to perfection

TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62,109
Likes
8,898
Rating
4.92
Order a print of this model
P
PrintablesMaple DIY

Build Plate Cleaner Microfiber Holder

Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
51,807
Likes
18,215
Rating
4.95
Order a print of this model
P
Printablescmh

Z offset calibration print

Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
31,162
Likes
743
Rating
5
Order a print of this model
P
Printablessobieh

XYZ Calibration Cube

XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
23,395
Likes
630
Rating
4.89
Order a print of this model
P
PrintablesRossero

Collapsible Hand Fan (print in place)

This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…

Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant

Downloads
15,836
Likes
4,107
Rating
4.37
Order a print of this model
P
PrintablesJeepingJohnny

Circular Sock Knitting Machine For My MOM and YOU! V2! With Ribber. Legare Style Machine!

THANK YOU Mom for being My MOM! You are Amazing and the best MOM ever! Please Give my Mom a HEART she deserves it! My Mom is always sewing and knitting for others. When my Cousins' wife was sick with cancer and lost her hair. My mom…

Print approx. €13.50–€16.50 excl. taxPreliminary estimate for one variant

Downloads
15,067
Likes
4,464
Rating
4.93
Order a print of this model
P
Printablescyron52

Ender 3 Refined Bed Level Test & Calibration

Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
14,883
Likes
307
Rating
4.83
Order a print of this model
P
PrintablesMadaco

[Use M3 screws] Spool holder for Prusa MINI Flexible

Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12,129
Likes
3,942
Rating
4.95
Order a print of this model
P
PrintablesExtrutim

Helix Test Cube / Filament Sample / XYZ Calibration

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
11,952
Likes
1,049
Rating
4.93
Order a print of this model
P
Printablessoozafone

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
11,065
Likes
2,408
Rating
4.94
Order a print of this model
P
Printablesval.fpv

flexible phone stand

phone stand with flexible design

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant

Downloads
8,894
Likes
1,853
Rating
4.81
Order a print of this model
P
PrintablesPrusa Research

Extruder linearity correction calibration tower

This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
8,343
Likes
686
Rating
4.88
Order a print of this model
P
Printablesthall72

Lego Compatible Classic Minifig Complete

This model is compatible with the lego system.

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,683
Likes
649
Rating
4.57
Order a print of this model
P
PrintablesDr_Lipo

Capibara

Capibara

Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant

Downloads
6,615
Likes
575
Rating
4.98
Order a print of this model
P
PrintablesFlyboyEUC

Collapsible Dice Tower

This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
6,439
Likes
1,416
Rating
4.89
Order a print of this model
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
6,439
Likes
304
Rating
4.89
Order a print of this model
P
PrintablesRT3D

Incredible Bubble Straw for Kids

Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant

Downloads
6,195
Likes
1,641
Rating
4.83
Order a print of this model
P
PrintablesImAThingsGuy

Reversible Hinge

4x 3mm countersunk machine screws STEP file added by popular demand

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
5,880
Likes
725
Rating
4.92
Order a print of this model
P
PrintablesVC Design

Invisible Wall Hook

Print Orientation! Front of the hook on to the bed! Update: Please reprint the base with the V2 stl file. There was an issue with the tolerances. Thank you @ Wojciech Kawa for pointing this out :)

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
5,806
Likes
2,144
Rating
4.33
Order a print of this model
P
PrintablesEmkatech (Mike)

Modular Scraper for 3D Printer Bed Cleaning – compatible with Stanley Blades & printable blades

This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…

Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant

Downloads
5,478
Likes
1,599
Rating
4.83
Order a print of this model
P
PrintablesPrusa Research

LA1.5 k-factor calibration

This is an advanced calibration, recommended only to experienced users. For more information, read this article . Material Layer height | Fastest speed | PrusaSlicer profile </tr> 0.2mm | 45mm/s QUALITY 0.2mm | 60mm/s SPEED 0.3mm | 50mm/s…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,279
Likes
458
Rating
4.8
Order a print of this model
P
PrintablesPax Prints

Lego Compatible Outlet and Light Switch Cover (FIRE HAZARD)

(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…

Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant

Downloads
5,162
Likes
1,415
Rating
4.94
Order a print of this model
P
PrintablesJCPhlux

First Layer calibration

I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
4,977
Likes
209
Rating
4.73
Order a print of this model
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Bed Level First Layer Calibration Squares Aligned with Bed Screws and Brim Test

This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
4,927
Likes
194
Rating
5
Order a print of this model
P
PrintablesMany24

Modern simple hook with invisible mount

UPDATE 29/02/2024 Some people requested bigger chamfer on the mount holes to accommodate bigger screw heads. Original 2mm chamfer Updated 3mm chamfer UPDATE 31/01/2024 After first feedback it seems that the original tolerance 0,05mm is…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant

Downloads
4,826
Likes
2,420
Rating
4.84
Order a print of this model
P
PrintablesR3D

20 mm XYZ Calibration Cube by R3D

This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant

Downloads
4,729
Likes
135
Rating
4.88
Order a print of this model
P
Printablesjkim_makes

9 Prong Espresso Distribution Tool WDT

This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
4,621
Likes
546
Rating
4.9
Order a print of this model
P
PrintablesDavis543

Calibration cube

All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buymeacoffee . This cube printer about 10% shorter than classic And look much better than clasic calibration cube

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
4,568
Likes
152
Rating
4.83
Order a print of this model
P
Printablesfilada

Calibration Cube

20x20x20mm calibration cube.

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
4,377
Likes
82
Rating
4.88
Order a print of this model
P
Printablesthrutheframe

HULA v1.0 Anti Vibration feet for Prusa Mk3/4, Core One (beta) & Prusa Bear

(IMPORTANT) Please download the User Guide for HULA v1.0. I do my best to double-check and test the print profile I created. They are up to date with the latest changes made to the designs. If you wish to purchase ready-to-use HULA feet…

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,334
Likes
1,050
Rating
4.98
Order a print of this model
P
PrintablesVC Design

Invisible Wall Hook

Print Orientation! Front of the hook onto the bed! Tested in PLA

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
4,033
Likes
1,727
Rating
4.84
Order a print of this model
P
PrintablesRedKrieg

Fibonacci Golf Ball

I did not like any of the parametric golf balls I was able to find, so I designed my own. This uses the fibonacci lattice to distribute points on the surface of a sphere in a relatively even way. The included STL has a diameter of 42.7mm,…

Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant

Downloads
4,007
Likes
90
Rating
4.86
Order a print of this model
P
PrintablesLinearRelation

Filament Swatch Library

A simple swatch to easily see all the filament you have. Easy way to save a bit of a sample filament for future reference. The swatches are designed to perfectly fit Avery address Labels (1" x 2 5/8") product no 15660. Available here :…

Print approx. €10.13–€12.38 excl. taxPreliminary estimate for one variant

Downloads
3,831
Likes
860
Rating
4.95
Order a print of this model
P
Printablessba1

Flexible/Bendable Brio rails in 3 sizes

Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
3,708
Likes
652
Rating
4.99
Order a print of this model
P
PrintablesMakkuro

Crocs name charms / jibbitz

Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
3,394
Likes
469
Rating
5
Order a print of this model
P
PrintablesIngo

First Layer Calibration

Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
3,322
Likes
176
Rating
4.96
Order a print of this model
P
PrintablesRosa3D Filaments

ROSA3D FILAMENTS MASTERSPOOL - REUSABLE REFILL DISCS COMPATIBLE WITH AMS

COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…

Print approx. €22.26–€27.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,109
Likes
181
Rating
4.95
Order a print of this model
P
Printablesgetcz

flexible snake

flexible snake

Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant

Downloads
2,970
Likes
230
Rating
4.9
Order a print of this model
P
Printablesashurexm

PLA Short Smart Compact Temperature Calibration Tower

Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
2,732
Likes
71
Rating
4.86
Order a print of this model
P
PrintablesMikkoP HAM3D

QuickLoc Carabiner and Hook System (print-in-place + molle compatible) V2

Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,677
Likes
1,110
Rating
4.97
Order a print of this model
P
PrintablesPeter Farell

Inosuke Hashibira

Inosuke Hashibira from Demon Slayer.

Print approx. €16.02–€19.58 excl. taxPreliminary estimate for one variant

Downloads
2,646
Likes
566
Rating
4.86
Order a print of this model
P
PrintablesGlennovitS 3D

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
2,388
Likes
500
Rating
4.86
Order a print of this model
P
PrintablesArtyL

First Layer Calibration Prusa i3 MK3/s/+

Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,383
Likes
135
Rating
5
Order a print of this model
P
Printables3DTimon

Ghostface Chibi – Cute Horror Icon for 3D Printing

🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…

Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant

Downloads
2,379
Likes
447
Rating
0
Order a print of this model
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Print approx. €5.37–€6.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,260
Likes
585
Rating
4.88
Order a print of this model
P
PrintablesCalebTimoteo

Totoro (Studio Ghibli) - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Print approx. €6.74–€8.24 excl. taxPreliminary estimate for one variant

Downloads
2,207
Likes
797
Rating
5
Order a print of this model
P
PrintablesDSkolnik

U-scribe jig set - Metric and Inch

U-scribe jig set for for all common thicknesses. Metric: 12 - 14 - 16 - 18 - 19 - 20 - 22 - 24 Inch: 1/2 - 5/8 - 11/16 - 3/4 Added STP file for your own customization ! 10.9.2024 Added 19mm on demand.

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant

Downloads
2,198
Likes
162
Rating
4.83
Order a print of this model
P
PrintablesCreativus

Small Fast Test Cube - Small Fast Calibration Cube 1cmX1cm 1g of filament! 0.5m!

Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
2,178
Likes
46
Rating
5
Order a print of this model
P
PrintablesRossero

Flexible Contour Duplicator V2

This tool accomplishes a goal that few other tools can: copy bigger complex contours. Place the Duplicator against any curvy contour with the arrows visible and pointing to the contour. Carefully transfer it to the medium (or even a…

Print approx. €3.03–€3.71 excl. taxPreliminary estimate for one variant

Downloads
2,114
Likes
1,613
Rating
4.65
Order a print of this model
P
PrintablesJulian0815

Smooth Cat LEGO compatible

I did not like the available edgy cat design, so I made my own, which is much smoother. Additionally, I made the upper tail section steeper, to remove the overhang. Under the model files you will find a version with a brim model. This…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
2,050
Likes
482
Rating
4.93
Order a print of this model
P
PrintablesRossero

Mini flexible tape measure spooler

This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
2,029
Likes
1,025
Rating
4.69
Order a print of this model
P
Printablesobri

First Layer Test for Prusa Core One, Mk4, MK4S Testprint calibration (or others)

This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,021
Likes
112
Rating
5
Order a print of this model
P
PrintablesAMPERAGE

12 Gauge Shotgun Shotshell Holder (Matchsaver) - M-Lok Compatible

Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,992
Likes
258
Rating
5
Order a print of this model
P
PrintablesMossi Brossi

Anti-Vibration Feet For Prusa MINI(+)

IF LOOKING FOR VERSION 2 OR 1 THEN CLICK RIGHT HERE ! SUMMARY OF CHANGES MADE WITH THE VERSION 3 !!! The current version of these is 3. They use over 55% less plastic than the previous edition and are over 2.5mm lower as well. I also…

Print approx. €1.34–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,973
Likes
450
Rating
4.87
Order a print of this model
P
PrintablesPatrik

Multiboard pegboard click hooks in various sizes

When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
1,864
Likes
230
Rating
5
Order a print of this model
P
PrintablesDazus K

Spiral Ribbon Christmas Ball 2025

The model has 2 small holes at the top to make it easy to add a thread to hang the ornament. The holes are great for thin threads, but may not work for everyone. I've also provided a version of the STL with no holes so you can add your…

Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant

Downloads
1,796
Likes
460
Rating
5
Order a print of this model
P
PrintablesTechNerd

Toy Train BRIO / IKEA compatible

I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
1,793
Likes
646
Rating
4.88
Order a print of this model
P
PrintablesSmoothDragon

Flexible fractal finger fidget (vase mode)

I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
1,781
Likes
366
Rating
4.83
Order a print of this model
P
PrintablesMiner

cali dog (calibration dog)

test the quality of your prints by printing a cali dog

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
1,732
Likes
141
Rating
5
Order a print of this model
P
Printableschleeblatt

lego compatible alphabet and digits

Alphabet that can be built on with Lego bricks (but have a flat bottom). The basic brick size "I" is 2x10. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PLA Category:…

Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant

Downloads
1,703
Likes
208
Rating
5
Order a print of this model
P
PrintablesLibor Škaroupka

Honeycomb wall organizer (not compatible with the original)

This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,656
Likes
342
Rating
4.25
Order a print of this model
P
Printableskunaa

First layer calibration

Print resolution: 0,20 Material: PLA

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
1,642
Likes
54
Rating
4.64
Order a print of this model
P
PrintablesKarel Pěnička

Flexible Spine

Easily printable cervical vertebrae with discs. No wipe tower. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelná krční obratle s ploténkami. Bez čistící věže tištěno. Segmentace CT dat…

Print approx. €10.97–€13.40 excl. taxPreliminary estimate for one variant

Downloads
1,639
Likes
380
Rating
4.8
Order a print of this model
P
PrintablesTmnSn

Lego Duplo compatible building block 2x2

A simple 2x2 building block compatible with Lego Duplo Rounded corners to make it suitable for kids No supports .step file for customisation Dimensions are pretty much exactly from the original, I just made some changes to make it more…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
1,593
Likes
86
Rating
5
Order a print of this model
P
PrintablesGeorge Manessiotis

Ultimate Ender 3 Bed Level Calibration Grid (ABL workaround)

Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
1,591
Likes
61
Rating
4.75
Order a print of this model
P
PrintablesJeepingJohnny

First Layer Calibration Squares! Fast Easy Print!

I made these three "Custom First Layer Calibration Squares" to help you dial in your perfect first layer. When printed properly they will come out as a solid single sheet of plastic. Its a fast easy print! .20mm Layer Height Single Layer…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
1,546
Likes
63
Rating
5
Order a print of this model
P
Printablesmaxelman

Flexible Train Track / Rails for Wooden trains

Bendy train track for non-standard curves

Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant

Downloads
1,519
Likes
219
Rating
5
Order a print of this model
P
PrintablesWilliam H

Lego Technic compatible 120 tooth gear

120 tooth Lego compatible gear Used an involute tooth generator by Robert Conklin for Solidworks. https://grabcad.com/library/robust-involute-spur-gear-generator-solidworks-1 Print instructions Printed in PETG, supports required because…

Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,491
Likes
118
Rating
5
Order a print of this model
P
PrintablesTechNerd

Toy Train BNSF locomotive BRIO / IKEA compatible

BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
1,460
Likes
453
Rating
5
Order a print of this model
P
PrintablesArtyL

First Layer Calibration Creality Ender 3 / Pro

Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - I have now remixed it for use on my Ender 3. In Summary, you adjust…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
1,455
Likes
57
Rating
5
Order a print of this model
P
Printablesddded

Updated OpenSCAD library for HSW attachments

UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
1,453
Likes
237
Rating
4.25
Order a print of this model
P
PrintablesGrafit

TOP GUN Tribute Stand - UPDATED! -> 2022

Update (2022.05.24): added 2022 date to the logo, because it is inevitable now. :) Update (2021.07.12): added new date to the logo, because original release date has been postponed due to COVID A fellow maker @agepbiz made those awesome…

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant

Downloads
1,418
Likes
184
Rating
5
Order a print of this model
P
PrintablesMartin's Musings

Flexible segmented vacuum hose for drill press with parametric FreeCAD design

This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,410
Likes
275
Rating
5
Order a print of this model
P
PrintablesAlvomane

Miele PowerDisk compatible lid | Miele PowerDisk kompatibler Deckel

Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,380
Likes
73
Rating
4.9
Order a print of this model
P
PrintablesRockChalkAZ

Gravitrax Compatible Spacer (various heights) No Support Needed

This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
1,367
Likes
119
Rating
4.92
Order a print of this model
P
Printableshypotesseract

Ender 3 S1 Snap-on Ribbon Cable Guide

For this remix of the JLOJ's excellent ribbon cable guide I changed the attachment to provide a snap fit. Usage To attach it, first slide in the ribbon. Next push the guide into the aluminum profile until you hear a satisfying snap. To…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
1,347
Likes
167
Rating
4.87
Order a print of this model
P
PrintablesJakub Lattenberg

Easter Eggs: Geometric Cross-Ribbing (8 Variants + Stand)

Add a modern touch to your Easter decorations! This collection features 8 unique egg models with elegant cross-ribbed geometry. The designs range from minimalist, airy structures to very dense, intricate patterns. Main Features: 8 Design…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
1,305
Likes
215
Rating
5
Order a print of this model
P
PrintablesIvo

curve 180degrees hotwheels compatible

update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…

Print approx. €6.68–€8.16 excl. taxPreliminary estimate for one variant

Downloads
1,303
Likes
191
Rating
5
Order a print of this model
P
PrintablesPrusa Research

Otto the Calibration Butterfly

Otto, the Calibration Butterfly, is a test model designed for Prusa CORE One+ INDX. We wanted to have a test model that you will not throw away after printing and assessing its quality. It is best to print Otto as a first print, right…

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
1,278
Likes
219
Rating
4.94
Order a print of this model
P
PrintablesEcoDad

Pentagonal Impossible Pyramid Passthrough Fidget

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…

Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant

Downloads
1,270
Likes
65
Rating
0
Order a print of this model
P
PrintablesFlexi-Maker

Flexible Rose Dragon

This is my dragon, I hope you like it. This model is print in place. Filling: 15% Extent: 2 This creatively designed and poseable "dragon" model is finished with intricate details. Its flexibility makes it an incredibly realistic dragon.…

Print approx. €7.49–€9.16 excl. taxPreliminary estimate for one variant

Downloads
1,205
Likes
168
Rating
3.67
Order a print of this model
P
PrintablesThieme

Anti-vibration feet mk3/mk3s/mk3s+

Anti-vibration feet set for the prusa mk3s / mk3 Print instructions Anti-vibration feet set for the prusa mk3s / mk3

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
1,199
Likes
128
Rating
4
Order a print of this model
P
PrintablesGP

Table angle bracket / corner brace (LACK-compatible)

Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,185
Likes
195
Rating
4.88
Order a print of this model
P
PrintablesCrepmähn

Extrusion Multiplier/Flow-Rate Calibration for PrusaSlicer

This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
1,181
Likes
103
Rating
4.69
Order a print of this model
P
PrintablesPetclaud

Prusa MK3 Z axis vibration damper

This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3. The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
1,170
Likes
179
Rating
4.47
Order a print of this model
P
PrintablesMarianne657

Monstera and hibiscus - XL texture roller

Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
1,161
Likes
283
Rating
5
Order a print of this model
P
PrintablesRui do Carmo

Squash Ball MK4/MK3s/MK3s+ Vibration Damper V4.0

New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…

Print approx. €3.50–€4.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,154
Likes
285
Rating
4.91
Order a print of this model
P
PrintablesJorge

Storage Tree - Leaf for PRUSA Tools - MMU3 Compatible

Introduction This module is part of the Storage Tree project . there’s no need for an MMU on this project. Only one material change. But there is a MMU3 prepared files if you have it In case you've come across this model and are unsure of…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
1,123
Likes
1,024
Rating
5
Order a print of this model
P
Printablessblomfield

4" DWV to 4" Flexible Dust Collection Hose Adapter

This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…

Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,117
Likes
136
Rating
5
Order a print of this model
P
PrintablesSzojka

Flexible Hidden Heart Scuplture

A flexible sculpture that is seemly useless until you fold it together. The joints are 3D printed and prints in under an hour. Try to get someone to guess what it is before folding it together. Let me know what you think. I need…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
1,103
Likes
356
Rating
4.82
Order a print of this model
P
PrintablesSASSy Design

Ribbon Plant pot and Planter - Vase mode design

Ribbon shaped plant pot- great for vase mode printing. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…

Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant

Downloads
1,071
Likes
287
Rating
5
Order a print of this model
P
PrintablesCameron

Pottery Rib Tool

Update: I included a version that is rounded on one side and square on the other. Print whichever you prefer! Summary: A tool for pottery wheel throwing, to shape pottery pieces with a wave-like pattern. Makes for amazing tea mugs!…

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
1,057
Likes
188
Rating
5
Order a print of this model
P
PrintablesFLink

BRIO flexible Schiene

Druck mit Filatech FilaFlex40

Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant

Downloads
1,055
Likes
113
Rating
4.5
Order a print of this model
P
PrintablesJenstheclown

Universal Coffee Distributor

This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…

Print approx. €7.80–€9.53 excl. taxPreliminary estimate for one variant

Downloads
1,054
Likes
159
Rating
4.92
Order a print of this model
P
PrintablesTim A.

Axial Fan Ø120mm LEGO Technic compatible

I've always wanted to design a nice fan, similar to the cooling fans that computers have. This turned out quite good in terms of both looks and performance. I was surprised that it was easier than I thought to get the right look. In terms…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,035
Likes
57
Rating
5
Order a print of this model
P
PrintablesPrint@Hive

Invisible Candle Holder

Invisible Candle Holder Bring a touch of magic to your space with the Invisible Candle Holder , a unique design that looks like it’s floating above your table! Its realistic melting wax effect makes it perfect for Halloween, cozy nights,…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant

Downloads
1,020
Likes
407
Rating
4.33
Order a print of this model
P
PrintablesDSkolnik

Scribe Block

Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
1,018
Likes
107
Rating
5
Order a print of this model
P
PrintablesSpock

GoPro Quick Release Buckle with Flexible Locking Tab

Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,008
Likes
264
Rating
4.6
Order a print of this model
P
PrintablesMarek Zítka

NB1100 deburring mod for Deburring Tool Case 154mm (Libraton) - Rugged Box Style

Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant

Downloads
1,001
Likes
330
Rating
5
Order a print of this model