P
Printables3D Poesie
KaliCube - X Y Z Kalibrier Test Würfel für 3D Drucker
KaliCube, der Kalibrier Würfel für deinen 3D Drucker, Jetzt Downloaden!
- Downloads
- 503
- Likes
- 6
- Rating
- 0
Search results: icube
Counting matching models…
P
PrintablesTech Tastic
Quick CaliCube
All in one calibration cube, small, useful and quick to print under 25* minutes! Looking to get the most out of your 3D printer? Look no further than our calibration cube! With its precisely measured dimensions and intricate design, this…
- Downloads
- 331
- Likes
- 27
- Rating
- 0
P
PrintablesViridi
HeliCube
Introduction to HeliCube ; geared cube made of helical gears! I've always loved how 45° helical gears locked together perpendicularly. So I made a cube out of them. There are 16 gears and they are all connected, so when you spin one of…
- Downloads
- 252
- Likes
- 173
- Rating
- 0
P
PrintablesAndyG68
80mm Flex-Rohr Adapter - Flansch - Sculpfun iCube
This is an adapter for an 80mm flex pipe. The walls are 2mm and the diameter of the pipe is 75mm to ensure easy installation. Very easy to print. EDIT: I have reworked the contact plate and adapted the bore. 100 diameter for the holes.…
- Downloads
- 228
- Likes
- 15
- Rating
- 4
P
PrintablesJoerg Kraemer
Sculpfun iCube jig
Jig to fasten materials so they are straight and repeatable. Baseplate fits sculpfun icube 3/5w and fences
- Downloads
- 218
- Likes
- 17
- Rating
- 0
P
Printablesblake3dcake
WiiCube
Convert a Wii with a broken disc drive ($20) into a GameCube that has all of your favorite games! ----------------------------- Step 1: Homebrew a Wii Step 2: Disassemble the Wii (optionally: remove the disc drive) Step 3: 3D Print the…
- Downloads
- 217
- Likes
- 44
- Rating
- 5
P
PrintablesFunky3D
Calicube (4 cm³ calibration cube and more)
Alternative calibration cube that is larger and doesn't require much material because it's sunken. Setting a brim skirt is advised if you don't use any extra adhesive stuff like me. Wall thickness : 2 mm Main mesh : 40x40x40 mm Additional…
- Downloads
- 125
- Likes
- 1
- Rating
- 0
P
Printablesgoesta
Sculpfun iCube Pro Mods
Sculpfun iCube Pro Mods I recently purchased an iCube laser and am quite impressed with the quality of the parts it can produce. However, I am not very impressed with the build quality of the machine itself. It has a lot of design flaws…
- Downloads
- 113
- Likes
- 12
- Rating
- 0
P
Printables3Z3D
Raspberry Pi 4B USB Splitter Case with 3 Holes (Blicube BliKVM)
Remixed USB Splitter Case (Blicube BliKVM) with 3 Holes to see all outputs / inputs Support me at: Buy Me A Coffee
- Downloads
- 106
- Likes
- 8
- Rating
- 4.5
P
PrintablesJoerg Kraemer
Sculpfun iCube jig V2
JIG System for the Sculpfun iCube 3/5 w with Lighburn positioning helpers
- Downloads
- 96
- Likes
- 10
- Rating
- 0
P
PrintablesAndrea
Sculpfun iCube body rods
All you need is a bit of epoxy glue, to bond these blocks inside the body of the laser, 4 nuts for 2 M6 rods. The lwr nut will secure the rod to not unscrew with vibrations. The rods end, are just a nice way to finish it, but not…
- Downloads
- 95
- Likes
- 9
- Rating
- 5
P
PrintablesPhoenix
Ungineer's CaliCube
Tests for ringing, Bridging, Accuracy, flow, stringing, Single line bridges, Floating circles, Bed adhesion 30mm x 30mm Small hole is 3mm Large hole is 8mm Cone is 18mm tall All gaps are 10mm Single bridges are 3mm apart Ungineer's…
- Downloads
- 81
- Likes
- 10
- Rating
- 5
P
PrintablesAndrea
Laser cut iCube extractor
A quick extractor manifold to be mounted at the back of the iCube laser cut machine to be used with a 100mm hose to collect the fumes. I wanted it to be a quick thing, so the angle of the blend is quite steep for 3dprinting, but I printed…
- Downloads
- 79
- Likes
- 8
- Rating
- 5
P
PrintablesKinetik
Sculpfun iCube protective shield
I've got the laser and was very happy with the small footprint. Nevertheless, the protective shield was, at least in my case, completely warped and the thickness of the glass was variable as well. It did not provide a complete protection,…
- Downloads
- 74
- Likes
- 8
- Rating
- 0
P
PrintablesDutylein
Sculpfun iCube Ultra Perforated plate
Deutsch: 3D-gedruckter Montagewinkel mit Lochplatte (Pegboard) für den Sculpfun iCube Ultra Lasergravierer. Zur Organisation und Befestigung von Zubehör. Material: PETG/ABS empfohlen. Englisch: 3D-printed angled mounting bracket with…
- Downloads
- 65
- Likes
- 7
- Rating
- 0
P
PrintablesArek
USB Splitter + text and no holes (Blicube BliKVM)
Print in multicolour or drop letter objects (to get embossed text). Top/bottom is compatible with origin of the remix, so you can mix one part from this remix with original part (if you don't want some text for example). Note : if you use…
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
PrintablesSeb F
Sculpfun icube smoke extraction adapter
A smoke extraction adapter for Sculpfun icube. To connect a 44mm internal pipe. You can use the originals screws for install it. I have print it in PETG with 0.4 nozzle.
- Downloads
- 56
- Likes
- 6
- Rating
- 0
P
PrintablesJoerg Kraemer
Sculpfun iCube jig V2 - pencil holder
Sculpfun iCube jig V2 - pencil holder
- Downloads
- 47
- Likes
- 4
- Rating
- 0
P
PrintablesCrazy Chicken
Calicube PLUS
A model similar to the calicube, but with extra, more difficult features. Print without supports.
- Downloads
- 43
- Likes
- 0
- Rating
- 0
P
Printablesregedit.exe
The New Calicube
Remember the old XYZ cube? What did it test? This is the new Calicube with many new features: NOTE: This is a separate model. I'm not the original XYZ cube author. If you have any problems or questions, feel free to comment!
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
PrintablesMy3DBr
CaliCube
I made a 20x20x20 cube with two top holes for calibration of dimensional accuracy - 8 and 6 mm diameter, one only hole (hole expansion) and other all through to help calibrate horizontal expansion.
- Downloads
- 33
- Likes
- 1
- Rating
- 5
P
Printables3DFreddy
FlexiCube
this is new generation of flexisqueeze but its cube!
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
PrintablesWeeblonMusk
PiCubed - a raspberry pi case design
I wanted a challenge for my first ever cad design project, so I decided to design around a Raspberry pi 5 with the active cooler. I learned a lot during this process, and had a lot of fun too. Outside of the filament, you will need: 6…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesGeaz
UltiCube
This is my take on a small Ultimaker Clone. Update 19 (26.06.2020): Added Mount for United Pro B3510X05B Fan. Update 18 (27.03.2019): Small redesign of the Hotend fanmount and shroud. Updated the Fan Shroud and the 3 Point Leveling zip…
- Downloads
- 29
- Likes
- 5
- Rating
- 0
P
PrintablesJesterhead
YetAnotherLargerMinicube, small Corexy Printer
Small Corexy printer using smooth rods 180x180x220 Volume (Prusa Mini heatbed) RepRap Endstops at X0/Y0 Case for SKR 1.4 + Stepdown module Display MKS12864B 2040 Profiles (mine were partially shorter, therfor I added some printed…
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
PrintablesUniqueDude
Multicube
5 in 1 multicube Made for kids to have fun with rolling and turning cubes inside. Dimensions 60x60x60 (mm) Printing: Quality 0.2mm or finer Normal support to support inner cubes over the buildplate Wall line quantity min. 3 Wall printing…
- Downloads
- 24
- Likes
- 0
- Rating
- 5
P
PrintablesAakaar Lab
Remix of Ulticube
date: 24.09.2018 I very thanks to @ Geaz for wonderful easy design & to share his work. I remixed it little bit as per my needs and considering the cost. The design completed today. I will update the progress later on Thank u to all.…
- Downloads
- 22
- Likes
- 8
- Rating
- 0
P
Printables2bedom
Sculpfun iCube Ultra clamp & alignment set
The Sculpfun iCube Ultra Laser comes with a non honeycomb cutting plate - this makes it difficult to clamp down wood or other parts. I Found no other solution out there so i made one myself. I Printed the whole set in PETG. 0.2mm no…
- Downloads
- 21
- Likes
- 10
- Rating
- 0
P
PrintablesJames Bromby
Sliced Dice - 9 Tricubes
Description This is a more complex dice cube puzzle - can you build a model of a dice using the puzzle pieces? The nine pieces can be assembled to form a cube that resembles a dice What to print: One of each shape: 1 x Sliced Dice Tricube…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesTami
Case for iCubeSmart 3D LED Cube
This is a case for the iCubeSmart 3D LED Cube DIY kit as available from Amazon https://www.amazon.de/gp/product/B084LM2P89/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1 I also used this acryl cubus…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesBruno Smed
Centicube
Just a centicube. Measurements might be alittle off, compared to the real thing.
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesGareth79
Case for "Blicube" USB-C power/data splitter
This is a case for a USB-C power/data splitter sold on AliExpress . It's described as "USB Power Splitter for Raspberry Pi BliKVM & KVM "KVM over IP" HDMI-compatible CSI 1 IN 2 Type-C Power Splitter" and has the brand "Blicube" printed on…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesMr_Kes
Kiddieland Multicube spare parts
There are two replacment parts for Kiddieland Multicube. CD-door may need some modification. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: gembird PETG black…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesstojev
Sony Digicube digital clock radio volume knob
Volume knob for Sony Digicube radio that i got without it, to use it you need something thin from metal, copper wire with hammer and heat insert it in the back, fits nicely and works pretty good. Print with supports
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesbrockhold
Parametric iCube
I really wanted to print out the iCube by Buback, but I wanted to define my iCube just a liiiiitle differently. Now you can too! With this parametric version, you can have an iCube of ANY SIZE! Instructions Download the OpenSCAD file, and…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesWouterV95
Infinicube lamp
This idea came to head when trying to figure out a way to combine the shape of the infinicube in to a lamp. The cube itself is made out of beech wood with mortise and tenon joints. It uses a total of 18 pieces of wood. of which 12 are 350…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesThe A-McD
TheMiniCube Topper - Lego Base
Lego Base Topper for Companion, TheCube Transform TheCube’s flat top into a limitless building zone. TheMiniCube Lego Base Topper is a precision-sized plate whose standard-pitch studs let you snap on bricks, minifigs, sensors, or…
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
Printablesstojev
Sony Digicube digital clock radio power button knob
Fits nicely, made it for my radio so i can use it. Print with supports
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesJesterhead
YetAnotherMiniCube
Simple Remix to Reuse some components I had available. Sorry, no BOM, please measure rods, bolts+nuts from STL Marlin config + SS profile included for reference 6mm X Axis (3*LM6) 8mm Y Axis (2*2 LM8U) 10mm z (2xLM10LUU) 120mm Bed, on a…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesStarkey
MiCube Filter disk V2
The second version of the filterdisk. I designed this filterdisk holder v2 with the intention to make an affordable and user friendly way to change between optical filter when using the miCube microscope as designed by hohlbeinlab making…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesmarbell
remicube board leg
So My brother asked me to print him some Remi cube board legs since new one are expensive so a quick 3D model
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesSeb F
Sculpfun icube smoke blower extraction
Sculpfun icube smoke blower extraction. Replaces the original fan, for efficient smokes evacuation, the outlet does this with an inner 44mm pipe. For the assembly, I replaced the original fan with an old fan of the same size, on which I…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesR J
Medicube age-r wall mount
A wall mount for the medicube age-r. apply double sided tape on the back
- Downloads
- 3
- Likes
- 2
- Rating
- 0
P
Printables
Sculpfun iCube jig V2
JIG System for the Sculpfun iCube 3/5 w with Lighburn positioning helpers
P
Printables
remicube board leg
So My brother asked me to print him some Remi cube board legs since new one are expensive so a quick 3D model