Counting matching models…
CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…
Hi Alex, I remembered you were after one of these prior to Xmas. Hope it helps with your project, Cheers Jace
Hello ! I created simple but reliable hook for drying rack. It's designed that way for better air circulation when you are drying the COVID masks. I use that by myself and it's very helpful. Feel free to comment and if You like it please…
The VOID16 Macropad is a handwired 4x4 pad that uses a Pro Micro as a controller. Bill of materials Redux 6 x M2x3x3.5 OD heat inserts ( aliexpress ) 4 x M2x10 Allen head screws ( aliexpress ) 2 x M2x6 Countersunk screws ( aliexpress )…
There are many versions for face shield headbands. But all of them require making holes into the protective sheet by punching or laser cutting. Too complicated in my opinion. Here is my version of the headband without pikes for holes,…
I have included my project files for each of these, but you are welcome to use and/or change them in any way you’d like. All I ask is that if you redistribute them, please mention me as the original creator. If you decide to sell them,…
This saves your ears when wearing your FFP2 masks for longer than just a minute :-) Print it using PET (around 30minutes): no post-processing as PET is flexible enough to bend over your head. Small enough for a print on a Mini! You want…
I was annoyed by the flat angle of the interface when its standing farther away on the desk. This stand fits exactly under the interface and angles it up. Still fits full size headphone plug without kinking. The corners are sized to…
I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable for us.…
Covid19 Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page here:…
Pour les masques : Impression en 0.3mm Remplissage : 15% périmètre : 3 Pour les clips : Impression en 0.3mm Remplissage : 15% périmètre : 1 4 Clips par masque 1 Feuille A4 transparente 180g posée à l'horizontale 1 Bande élastique de 27cm…
The bit holder lets you store up to 4 bits, it clips on very firmly onto the tool. Prints easily without any supports needed.
two templates to mark the cut lines for the lower and upper side of the Prusa shield. Two separate files, because the whole shield size (240x240) does not fit on the build plate. Especially the curves are difficult to make perfect without…
I made an elastic remixed idea from https://www.prusaprinters.org/prints/26330 But I design this for FLEX filament printing an d optimized design. I used Ice Filament FLEX which has high shore (== not so flex) This could be sterilize at…
Print of https://www.prusaprinters.org/prints/26800-prusa-rc2-face-shield-upper-brow-cover-no-supports
This is the Printable .stl for the COVID19 HEPA Filter Mask V5 (.3 Micron). ATTN: YOU MUST PRINT THE MAIN BODY OF THE MASK IN TPU, AS WELL AS IN VASE MODE (WITH 2MM BRIM) I have also decided to provide the .step (Editable File) located on…
A mock of an ID1 card (a standard credit card), exact dimensions according to the international standard, ideal for photography. Its exact dimensions are 85.60 by 53.98 millimeters, with a thickness of 0.8 millimeters.
Dear 3D Printmakers, Designers and Patrons, This is the Printable .obj for the COVID-19 F2 HEPA Filter Mask V3 (.3 Micron) Main Body. ATTN: YOU MUST ALSO DOWNLOAD THE 3D PRINTABLE GASKET AND PRINT IT IN TPU. For designers the .step can be…
We have a shortage of elastic in our area so I have created this adjustable face shield strap. This can be laser cut or cut with a CAD table such as a Kongsberg. I have only tested this with 0.20 PETG clear sheets. Other thicknesses may…
Based on: https://grabcad.com/library/coronavirus-flu-reusable-mask-1 Print instructions Updated with better screw holes and the possibility to attach over-head stripe.
Properly configured https://3dverkstan.se/protective-visor/protective-visor-versions/ for Prusa MK3s. As described at https://3dverkstan.se/protective-visor/protective-visor-print-guide/ it's very important that there is no infill as that…
When producing several of the covid19 shields without having a laser cutter this template is usefull. You can mark the holes and the upper and lower edge with a pen. The template is not as long as the foil so you have to place the…
I designed fast printable & easy maintainable faceshield. After print all u need A4 size transparent film and a piece of elastic band. Cut the film 260 mm x 210 mm and slide into gap at the front and tie the elastic band to back side of…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
forced type of Prusa RC3 A4 https://www.prusaprinters.org/prints/27026-prusa-rc3-a4-sheet-face-shield-remix-quad-stack/files Print instructions Print at Prusa Mk 2.5, PET, 0.25 mm
A simple ergonomic design that can be mass produced and delivered quickly to medical staff in need. Designed in Mexico City to be donated to public hospitals as quickly as possible. The idea of the design is to make a low cost,…
Just another face shield with less printing time. One alone, 2 stack and 4 stack.
This is a repaired mesh from the file at https://oceanservice.noaa.gov/facts/geoid.html Prints great at .16 resolution. Great present for a surveyor or anyone in the geospatial field!
I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable for us.…
This is a Cylinder-Door Handle that allows to the user to avoid contact with most door handles. It is designed to avoid contamination of your hand. Only the inner surface of the cylinder touches the handles. Even if you put it in your…
Covid Prusa shield for A4 with secure slips to shield and bottom Print instructions designed for A4 covers for comb binding and gap with standard hole punch
Simple stand for Rabid1972's awesome blasters.
Description Grid10 Wrench Organizer. Three sizes are provided for various size wrenches. Two per wrench works the best. I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
This is a modified US faceshield headband, chin support, and strap holder with two sets fit onto the bed. Prints in under 3hrs. The headband modifications include: -slimming and perforating for a faster print with less material…
The face shield mount pins are modified and optimized for HOLE PUNCH designed by Japanese industrial standard, JIS S 6041. Pin pitch: 80mm, Hole dia: 6mm
I did not have access to a laser cutter but had the need to make the process of making shields faster and more repeatable. This tool allows for precise and repeatable hole punching and sandwiching of foil so a few pieces can be cut to…
This is a mechanical toy Covid19 test. I am not sure what its for but it is a fun gadget. It implements some fine mechanics to first fill the teststrip with water then shows the test stripe go red and then the corona stripe. To activate…
To expand the length of elastics used in Covid19 Face Shields. The idea is to decrease the elastic pressure on the head.
C'est un remix du clip pour les points suivants : L'un des bords du Clip (celui qui repose sur le bed) est chanfreiné pour éviter le bourrelet de 1ère couche Ajout d'un rebord pour verrouiller le Clip sur la monture
Standfuß für Covid19-Teströhrchen. Max. Durchmesser 9,5 mm.
Olight ArcPro style flashlight charging station. This can be mounted on a wall, screwed to the Grid10 Base plate or there are holes on the back for two 18x3mm magnets. This is a great accessory of you want a secure mount for your Olight.
This is a remix/cover for the great mask that can be found at: https://www.myminifactory.com/object/3d-print-covid-19-mask-darth-vader-star-wars-115443 I designed it at the request of a local EMT. You'll need to go download his original…
Protetor facial simples impressão rápida e customizável no OpenScad Diâmetros internos de 16, 17 e 18 cm. Print instructions Variaveis podem ser alteradas dentro do OpenSCAD e depois recompiladas. D1 = 80; // 8,00cm D2 = 90; // 9,00cm A1…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
Raises and tilts the Audient iD14 by 25° for improved visibility and easier control access,while keeping all front conne
Half mask (Covid19) Filter: 2x make-up removal tampon 60mm Face - PETG Other - TPE flexible FaceCoveringChallenge Category: DIY
Update 4.24.24: Finally got around to finishing my BOX Sign with lights. Lights are just some cheap battery operated LEDs from Bezos World. (lol) Uploaded a second version with a facepalm emoji (face c/o:…
Print in something tough like PETG or ABS glue on a magnet and you have yourself a handy screw holder. I used a magnet I recovered from a dead hard drive but any strong magnet will work.
A simple holder to place on the shopping cart tube (to avoid contact with the hands). Can be adjusted with inserting a rubber patch or more if necessary Category: Household Supplies
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable…
This is the beginning of many more labels to come. I have also added a tool loop to each label of a common diameter of each extension. Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft…
this is a version of a SARS COV 2 3d model based on the pentakis dodecahedron, each vertex has a 3mm hole to accomodate 3mm Nails 20mm long. the pentakis dodecahedron ensure the best model for almost equidistant holes. The holes are a…
Mount for rp2040 type-c controller board
Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is…
Dieser Halter ist dafür gedacht, dass Schüler einen Corona-Selbsttest durchführen können und sowohl das Stäbchen als auch das Röhrchen mit Flüssigkeit gegen Umkippen zu sichern. Es ist optimiert auf den Druck mit 0,6mm Nozzle, damit man…
This is our version of Prusa Covid 19 Mask ribbon. Printed with TPU. There are 2 different versions, for lager and smaller printers, but with the same lenght. Made by Soldex Category: Fashion
Light half mask (Covid19) Filter make-up removal tampon 60mm Body TPE flexible Category: DIY
Faceshield for COVID-19 PPE Shortage Print instructions Using a 0.8mm nozzle and 0.5mm layer height with PRILINE CF-PC - the rigidity is enhanced. Prusa MK3S with Volcano 0.8mm Ruby Sapphire Nozzle Also tried with MG Chemicals PETG for a…
Fasion, gadgets Print instructions cov 2 and cov-2 print whith PLA GREEN YELLOW 606 (glow in the dark) others standard PLA
This is a small razor blade holder/tool that helps split foam "caulk saver" into two halves. The split foam tubing makes a pretty good comfort seal for the 3D printed masks I've made, making them a lot more comfortable (and probably a…
just print without support. 15% infill
inspired by https://www.materialise.com/en/hands-free-door-opener , (Edit: found it just now on https://cults3d.com/en/3d-model/tool/printed-door-opener-to-help-against-the-spread-of-coronavirus ), so all credit for the idea goes to them!…
Simple cookie cutter in the now famous shape... Print Settings Printer: Prusia i3 Mk2 Rafts: Doesn't Matter Supports: No Notes: Just make it in a easy to clean plastic ... Category: Kitchen & Dining
Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is…
My local paper had a story about why many people are not wearing masks, and they interviewed a guy who said he "personally refused" to wear a mask because (to paraphrase) he was not at risk for anything, and felt that the risk was…
Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is…
Air Drill Organizer. The picture sums it up I believe. Like all my other designs, this also uses #4 sheet metal screws. Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s…
Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is…
Holds a row of vials and swabs for covid19 rapid tests in a row. This is parametric: update the "initial" variable at the top to add/remove vials in the row and to change what letter is in front of them. Category: Household
Update 4.24.24: Finally got around to finishing my BOX Sign with lights. Lights are just some cheap battery operated LEDs from Bezos World. (lol) Uploaded a second version with a facepalm emoji (face c/o:…
This is our version of Prusa Covid 19 Mask ribbon. Printed with TPU. There are 2 different versions, for lager and smaller printers, but with the same lenght. Made by Soldex Category: Fashion
Made me a bit holder for my Ryobi driver. Might also fit other models, but I can't test since i don't own any atm :)
ryobi tool bat cover impact driver r18id1 printed in tpu, keeps dust and wasps out, printed in tpu
ryobi impact driver holder r18id1, keeps dust and bugs out, printed in pla+, 3 walls for extra strength.
