416 models
tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…
A pair of 3 x 15mm countersunk screws are used, to mount it to the wall
I have several times accidentally hit the Netflix button while watching other things. So now this exists. This was designed for PETG, but PLA or any rigid filament will probably work too. This was NOT designed for flexible filaments as…
In addition to this very simple 3D printed part, you need: double sided tape: 24cm long, 15mm width (or 12cm long, 30mm width) 2x zip-tie: 200mm long, 4.6mm width Print instructions: Flat surface on the print bed 15% infill 0.10mm or…
Fits top part as normal but this version has a hole in the bottom to allow for the 1TB NVME with heatsink which does not fit in the original case bottom.
A holder I made for chap stick and a Nvidia shield remote controller. Used to mount under my desk. Comes with a filler block so the chap stick doesn't go in all the way and get stuck. Model is also cut in half just to make easier to print.
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
3D-Printed Adjustable GPU Support for NVIDIA & Radeon Graphics Cards Take your PC build to the next level with this 3D-printable GPU support , designed specifically for makers. Prevent graphics card sag while adding a touch of personality…
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ;…
The design by Kodatrololo is an excellent design and I decided that it could use a logo. So I inserted the logo using Microsoft 3D Builder. Print instructions Unassociated tags: nvidia shield stand Category: Household Print Settings…
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
A simple Case for the NVIDIA Shield Remote. There are two versions, with access to the Netflix button and without: “With Netflix” to have the button NOT blocked “No Netflix” to have it blocked The back is flat so the remote can actually…
3D Printed GPU Sag Support for Nvidia and Radeon Graphics cards. GPU sag is no longer a problem with the 3D Printed GPU Sag Support. the model is easy to print, no support is needed, and the model is designed to save printing pop and…
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
Please comment, rate, and post a make! I needed a wall mount for my Shield TV Pro (affiliate link). I found the original model, but wanted to use screws instead of 3M tape. I added two screw holes that will take an M4 screw, along with an…
Either print Black and Silver with dual extrusion (printing with 2 plastics) or print the Full version. You can, but it is very hard to, print this design in 2 colours seperately and later assemble them. I have seen someone do it.…
A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA, etc. PWM controller makes the fan basically silent in a full tower case.…
Hey, This is a fan shroud for Nvidia Tesla cards which are structurally identical to the P40. After a failed attempt using a normal Noctua (damn I sank money into it...) fan I realized that air pressure is the key to cooling the P40. Due…
GRAPHIC CARD SUPPORT DEVICE OPEN 110 MM CLOSED 64 MM YOUR GRAPHIC CARDS WILL NO LONGER BE WARPED AND WILL BE ABLE TO ADD STYLE WITH THEIR ELEGANT LOOK
Fan ducting that can fit an Nvidia Tesla Pascal-generation P100 and possibly P40. Maybe even more! I'm not sure. I don't own any of the others. I am not good with computer. Or 3d modeling. If this isn't perfect, I'm sorry, please teach me…
1:1 Model of the Nvidia DGX Spark, using this for making stands for stacking the spark. Wasn't able to get the cheese grader texture on the front, but it is flat with the sides, so take that into consideration if using this for a…
A quick and dirty (emphasis on dirty) hack of HojoWork's 90 degree 120mm blower duct. Removed the bend so you can conceivably mount 2+ cards on the same board. Requires supports to print. The first one I printed worked out fine, but the…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…
This is a cooling housing for DGX Spark and related AB10 AI supercomputers. It extracts air from the rear vent while maintaining access to ports. It fits in a 3U rack space, takes a 120 x 120 x 25 mm fan, and has rails for a 140 x 140 mm…
Nvidia GPU support 70-120mm I inspired by https://allegro.cz/produkt/podpera-graficke-karty-nvidia-drzak-s-nastavitelnou-vyskou-70-125-mm-f25e6b5e-8f1d-4374-93cb-ffe712564d66?offerId=17501680800 Assembly: insert nvidia logo to main body…
This is multi-wrench I made for my Rugged Obsidian 45 that includes a regular mount wrench, an end cap wrench, and a 3-lug mount wrench. Print flat side down, no supports required. I designed this in inch standard and that's how it…
To scale glass dagger from the epic series Mistborn by Brandon Sanderson.
Print settings: Printed with support (I printed it with "normal" support, tree support may also work) Short version may also need supports on the inside 3 walls 20% infill Comes in 3 lengths Includes printable gaskets for better…
This is a functional 2 Node Cluster cooling duct for GB10 AI super-computers like the Nvidia DGX Spark, ASUS Ascent GX10, Dell Pro Max, Gigabyte AI TOP Atom, HP ZGX Nano, MSI EdgeXpert, and ThinkStation PGX. It fits in a 3U rack space,…
Tired of watching your graphics card slowly strain your motherboard? Introducing an adjustable support solution designed to meet your needs, complete with a versatile clip for attaching any design you desire! If you print the AMD logo,…
This is a model for a vertical stand for the Nvidia shield pro 2019 version. No need to for support
Jedná se o logo Nvidia. Například k přilepení či jinému přidělání na skříň počítače. Jedná se o remix od autora Thomas Kuban. Snížil jsem za mě zbytečnou výšku modelu a celému jsem dal jakýsi podklad, na němž vše drží. Doporučuji tisknout…
Nvidia GeForce GTX 1650 Low Profile bracket. Print PLA. Update 25.1.2026.
This is a small remix of an existing model I found on onshape. All credits to the original designer of the fan shroud. I'm using sunon fans with the product id mf40201vx-1000u-a99. These are Sunon 40x40x20mm fans. They are not expensive…
Nvidia Tesla P4 Fan Shroud to allow you to fit a 50x15mm blower fan on the end to increase cooling in 1U servers where airflow isn't quite cooling
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
NVidia Shield is a powerful Android media center. Its remote is nice but way to fragile (especially with children at home) This shell fully covers the remote to protect it. The remote also has a Netflix button on the bottom which can…
Nvidia GeForce RTX 3000 series PCI/PCI-E slot covers with extruded model names. Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover. Why have boring, plain, generic PCI/PCI-E slot…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
I needed a simple yet aesthetically pleasing plant pot for my growing jungle. Therefore I designed this perfect squeare-ish vase mode print to achieve that end. I designed this in Blender and applied multiple subdivisions and displacement…
NVIDIA Jetson Orin Nano case optimized for cooling, and minimizing plastic. Thin 1 mm top and bottom, and 2 mm walls. Requires 4x M4 screws that also act like feet.
A small 3D print to be able to fix a Nvidia Jetson Orion Nano to a Din rail. Super easy and fast print. If you like to, check out my other designs too!
GPU Holder NVIDIA / RADEON This universal GPU holder, designed for NVIDIA and RADEON graphics cards, is a practical accessory for every PC builder who wants to protect their components from sagging or damage caused by the card’s own…
Fuzzy skin make this model more beautiful;) I don't have much time for 3D, but I try to do something in my spare time :)If there are any questions or advice, I will gladly listen.
This mount allows you to easily service your Shield TV as none of the cables are captured. Simply put 1 or 2 command strips on the back, apply pressure and wait (follow directions). Now you can easily put the Shield TV into the mount. I…
The Tube Shield - or as I call it the Sausage TV - is an interesting design. The CPU has a heat sink and there is a fan inside the tube that supposedly, should suck air into the tube through the heat sink and exhaust it ... to nowhere.…
Custom design Air Duct Attachment for the GPU which attaches a 40mm fan at one end of the GPU to push sufficient airflow through the silicon which could greatly reduce its operating temperature. I have designed this with the use of a 4x10…
This model modified the original fan mounting part to fit 80mm fan, which allows more air flow to make the GPU even more cooler. Also the inner has been enlarged a little for the shrinking of ABS prints. The original model was created in…
Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Attach the backing plate using 2mm self tapping screws .
Updates are likely to follow. To make Rocky in the presented pose, you only need to download and print two files: “carapace” and “all legs”. The holes in the body are there to put rubber bands in and tie the legs in the joints. Drill…
Last year I modified my laptop to support an external graphics card using the EXP GDC Beast (v8.3 in my case) adapter, allowing me to play relatively modern games when away from my main rig. Rather than have the card exposed, I designed…
I kept misplacing the Shield remote so decided to make a nice holder base for it. To add a little refinement I embossed the Nvidia logo into the front. I made sure to give a really nice fit to the rounded triangle profile of the remote. I…
Since the GPU in my server (a Tesla T4) was running way to hot, since it's a passive cooled GPU and I had limited space in the server (a 2 unit supermicro) - so existing adapters I found didn't fit, I came up with this adapter to fit a…
WARNING: Since this adapter deals with electronics/heat, use it at your own risk. You can get the fan here: Amazon.com: UTUO Variable Speed Blower Fan, 110V 120V 220V AC Powered 120mm x 32mm air Exhaust Vent Cooling Radial Centrifugal…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
Fits many GPU models like; V100, P100, M40, K series but not K20. Not an exhaustive list.
A small combination mounting bracket and standoffs for an NVIDIA Jetson Nano developer kit. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.
Portable DGX Spark stand for stacking 2. Reversible direction with airflow.
The Nvidia Jetson Orin Nano developer kit comes with the PCB mounted on a plastic frame. This frame hosts both the Nvidia Jetson itself, along with the antennas for the WiFi module (mounted underneath). This model is based on the stock…
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used. First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and…
Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics
This mount is meant to to be mounted to a 100x100 VESA mount.
This is a duct for the nvidia rtx pro 6000 server edition, compatible with 120mm fans. I tested with a noctua industrial The server edition doesn't have any fan as it's expected to use in a server chassis with enterprise grade fans. So…
This model allows a 92mm fan to be mounted to a NVidia Tesla P40 & V100 cards. It was designed to replace the funnel from eBay, which had two small fans, which were very noisy. The eBay fans came with a fan controlling circuit board for…
Printed on my PrusaXL with colour change set up in the Slicer Used generic black PLA and Purple Galaxy Prusament, but you can definitely achieve better results by painting the model Added a version with a flat bottom surface, for easier…
Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Remove the lower bracket with antennas from the devkits. Attach to the shelf using 2mm self tapping screws .
I created this mounting bracket after the one that came on my P100 wouldn't fit in my Dell Precision desktop. Using this bracket should allow it to be mounted in any standard PC case without any issues. While having it printed in plastic…
I did find allot of tablet holders for on a head rest without the need of bolts or other (non printed parts). This is fully only printed (beside a bit of glue) I created this one for the Nvidia Shield tablet Note however that you can…
Adapter to mount 2 40mm fans to Nvidia L40 GPU. Fans are mounted by M3 bolt directly to the plastic body. Adapter is mounted with original screws.
120mm fan duct for NVIDIA A100 / CHMP 170HX GPUs. It's not a very efficient design, but it's enough to cool a CMP 170HX with a 120mm Noctua industrial 3000RPM fan. .STL file is included Printing: Orientation: Large Flange on bed Material:…
Welcome, Hunter. You are Forth , a living weapon forged for a single purpose: to dominate the battlefield and sever the souls of your enemies. You are not a simple soldier; you are a Level 18 Battle Master Fighter , a veteran who has…
Here is a simple single unit top mount cooling duct for the DGX Spark and related GB10 AI supercomputers.
Nvidia GeForce RTX 4000 series PCI/PCI-E slot covers with extruded model names. Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover. Why have boring, plain, generic PCI/PCI-E slot…
This is NOT a very good model, I just designed it for this video (need to add link after publishing) and wanted to share it on the off chance someone needs it. It fits the shorter heat sinks like what is on this listing here:…
Remix of MWinkel's remote holder to remove the screw holes, for those who would rather just use an adhesive strip.
A simple wall mount for the Nvidia Shield remote. 2 version: Without holes, to install with double sided tape or an adhesive strip. And one with 2 screw holes (max 4.0mm screws.) Easy print, no supports.
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
This is a low profile bracket for a p400 gpu. The mounting screws cut threads into the plastic. Fit is pretty decent. Print with supports as shown. I set the model to be solid throughout (0 infill) to get it as stiff as I could.
With severely limited mounting space, this solution provides at least basic cooling capabilities. Mounting the fan as close to center as possible to distribute the air flow as evenly as possible and reducing the amount of supports that…
NVIDIA Tesla P40 Shroud with 2x4010 Fans on top instead of bottom
Nvidia GeForce GTX 1000 series PCI/PCI-E slot covers with extruded model names. Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover. Why have boring, plain, generic PCI/PCI-E slot…
Shroud improves cooling by 15%+ on V100 16GB version. Organic tree generation with 100% first layer density and 3mm first layer expansion worked best for me for best bed adhesion.
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
This version is a slightly modified MK4 Nozzle Replacement Tool design to snap fit with the E3D ObXidian nextruder nozzles 0.4 and 0.6 at their correct position on the heatblock
My daughter is fascinated by our Shield remote, which results in sudden weird behavior on the tv - she got it. I figured, I'll print a copy of the remote, slap on a rubber case just like we have and that's her remote. But apparently,…
Inspired by what look like obsidian swords in various places online I wanted some for my Transformers. Enjoy.
I made this simple print to run an Nvidia Tesla P40 outside of my rackmount server as the server doesn't have enough internal space to fit it. The print simply keeps the card upright and locked to the psu so it doesn't slide around. The…
This is a 120mm fan adapter for use with Nvidia Tesla V100 4x Local LLM server, please use fan with over 2500rpm for better cooling performance.
My dog chewed on my remote and destroyed the battery cover. Mocked this up in Fusion 360, fits good enough for me to be functional on the first design iteration. I printed with paint on supports in the orientation shown in the image. Step…
This is a model for the NVIDIA GTX TITAN. It can be mounted on the Founders Edition card (in fact it even fits the 980TI). Should be printed in PETG considering the temperatures. I have printed it in PLA for testing and then Carbon Fiber…
one peace, no supports required models vary by the mounting screw head type
A shapely rounded power cable support clip for the Nvidia RTX4090 Proudly designed in FreeCad
Recently, I installed some graphics AI on my computer, and I like the side blowing cooling method, so I made a fan adapter that looks good to cool my graphics card This model is applicable to the fan model 752512Turbofan
