Counting matching models…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.
Print approx. €4.26–€5.20 excl. taxPreliminary estimate for one variant
Could not find a suitable holder for my IFIXIT dental tools, so i made one myself. Easy to print and with minimal support waste. Still the tiered design allows for easy access of any tool without knocking of the other ones. My recommended…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
A Gridfinity tool holder for an iFixit Kit.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Die Schalen wurden passend für die Ikea Alex Schubladen erstellt und das sie kompatibel mit dem sliding-tray sind https://www.printables.com/de/model/886260-sliding-tray-for-ikea-alex-drawer
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
A remix of MarMed's iFixit 64 bit driver kit holder but without the logo, as I prefer the clean look. Printer settings 0.6 nozzle (Bondtech CHT), 0.3 Quality profile. Supports enabled (everywhere) Printed with Clas Ohlson PETG but PLA…
Print approx. €2.91–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
If you're like me and have been accumulating loose extra tools in this kit that fall out when it's opened, then this magnetic extension tray can be stuffed with that excess and more. The top of this tray is made with a small lip that…
Print approx. €5.67–€6.92 excl. taxPreliminary estimate for one variant
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
Simple Case for Omnifixo https://omnifixo.com/ You need only 2 round Neodym Magnets 12x 3 And 4 silicone adhesive pads or you print your own TPU feets and glue it. I printed in Devil Design Blue with 0.4 Nozzle and 0.2 layer heigh on…
A bit extender compatible with the iFixit Precision Bit Driver. The diameter of the extender shaft is smaller than the one on the driver, allowing for unscrewing of hard to reach screws. Shaft length is resizable in the Fusion source…
I designed the tray for my Multifix holders to store them in the workbench. Printed with PLA @ 0,25mm an 0,6mm nozzle.
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
The original box for the iFixit Mako Driver Kit is held closed by magnets. However, if you often carry the toolkit around, this extension might be useful to you, making the box closable with a latch. All parts are printable without…
This is a storage tray for the iFixit Mako Driver Kit with its original case. It a 5x3 tray for the Gridfinity system by Zac Freedman . This does take up more room than Zac's model for the kit but this allows for easy transport and…
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
Crucifix - DOORS Print this suuuper easy miniature of the Crucifix, an item from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. Scale up in Z (turn off uniform scaling) to make it thicker. Thank you for printing our…
Revision history: 27/01/24 added the STEP files, which may be particularly useful if you want to adjust the slots for the magnets inside the guiding rails. 01/02/24 added an alternative guiding rail version with cutouts for round magnets…
After the release of the the “ iFixit Mako Driver Kit box frame ” I asked myself, why the heck did I never make a version based on my parametric “ Rugged Box ” to fit the foam insert of the kit. So, I did it now. I included the lid in two…
Crucifixion in Retz, Lower Austria - 1727
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
Molle MultiFix : for the well-known molle system, this offers a lot of individual application options. You can use it with paracord, bungee cord (rubber band) or any rope you have on hand. Simply thread the paracord and you can attach…
This enables you to store your iFixit Essentials kit on your IKEA Skadis pegboard. V2.0: This is a new version, updated to use the supportless and easier to print Skadis Ultimount, just like DavidsGotWoods Mako Kit. Since it was requested…
This is the Crucifix Patch. It is a device from "Murder Drones." The show was created by "GLITCH" on YouTube, and they recently released episode 7 "Mass Destruction." SPOILERS In the episode, we are introduced to the Crucifix Patch or…
This is a simple keychain with the Grucifix from the ghost band. I recommend using at most a 0.4 nozzle. Everything large might not work ! Works well with TPU if you want something flexible! It is 30mm wide and 47.25mm tall. The hole is…
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
I was inspired by the few Omnifixo Pinecil case designs, but wanted a version that would also hold solder and a brass sponge so I had everything I needed to solder on the go. This version will require 4x 10mm ball bearings. These ball…
Combined this model https://www.printables.com/model/498256-ifixit-pro-tech-toolkit with the wastebin mounting system
I loved the excellent model by @JohnD920 for mounting the iFixit Mako Driver Kit to the Honeycomb Storage wall—but I wanted to be able to (optionally) leave the lid off the kit, and be able to just choose driver bits directly from the…
I was searching for a Gridfinity holder for my iFixit Mako set, but wanted to keep the original case as I like this very much. This design is also very much inspired by iFixit Mako Screwdriver Set Gridfinity Holder by Tactical Grizzly ,…
iFixit Mako Driver Rugged Box Frame I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution. This uses the dimensions from the…
I use my Manta kit every day, and I wanted to make sure it was always within reach when I needed it. This simple design lets you slide your Manta kit just under your desk, keeping your work surface clean when you don't need it, but always…
Block is two block deep and 3 blocks wide. Printed with 10% infill and 0.4mm layer height with 0.6mm nozzle. Built on my easy to use template base: https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3…
I was having a hard time reading the existing labels and finding the empty holes to put back the bit I just used, so I made this model that can be printed in white or other bright colour making it easier to find the empty holes. The plan…
Here's a honeycomb storage wall Ifixit Mako 64 piece mount that allows you to put the cover on the back giving you full access to your tools without removal. Requires 2 of the hollow inserts for mounting and supports enabled. I put the…
This is a desktop bit holder for iFixit 4 mm bits and bit holder.
Makes the Ifixit screwdriver set much more accessible than when stored upright with the lid on, and take up less space than when stored flat & open. There's a large open space in the back for more storage, or to add weight. This is a…
Made this for easy accsess to the tools in the kit. And thinks it looks good on display as well ;)
Tried to max out my Soldering Game. This is a box that fits for the best third hand in the world, called Omnifixo. I was inspired by the Box from Fab Lab Leon, but wanted to take some more stuff with me and therefore designed my own.…
Remix to mount to an IKEA Skadis Pegboard Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Notes: Supports needed for pegs Category: Tool Holders & Boxes
Crucifix Jesus Christ Silhouette Wall Art
If there is too little filament on the coil, it is pointless to print a large model. And it's a pity to throw away the leftovers, too. But you can print such a trinket as a gift or just for your own pleasure. P.S. When printing this…
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
Frame for iFixit Manta Driver Kit. IIt fits very tightly, if it has to be taken out of the housing frequently, it has to be scaled up a little bit. The two frame parts are connected by a sprip of filament. The latch and the bottom part…
If you're like me, you don't like the case that the ifixit Manta screwdriver kit comes in. It's a really good screwdriver set, but the lid falls off as it's only held on with magnets. This case has latches so it won't come undone in your…
The holder has three attachment points and is therefore bombproof on the honeycomb wall. Small clips were added to the side where you can store tweezers, spudgers or other small tools. The lid can still be stored at the back. Just print…
There's only one STL. Print two copies normally and two addition copies mirrored in your slicer. Takes up a 3x5 slot area. Corners can be stacked when not in use and they are tall enough to help support adjacent modules. Uses dramatically…
An hommage to the tombstone in the form of a grucifix from the cover of the “Rite Here Rite Now” soundtrack. The dimensions are 223×150×15 mm. There are a “damaged” as well as a thin (228×150×8 mm) and a thinner (no border, 215×142×5 mm)…
3D model of the Omnifixo clamp and magnet for all your modeling needs.
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Some time ago I broke my iFixit tweezers tip and since i didn't wanted to buy them i made my own based on originals. Very easy print. I printed with 100% infill, 0.12 layer height, with PETG filament.
I love my Omnifixo clamps. They are so far the best third hand I have found. But for clamping some objects it would be helpful if the clamps could be on different heights. Sure, you can stack the yellow parts of the clamps, but as there…
Reverse Tweezer Tip replacement. Won't be as strong as the original, and you will need to thread the plastic with the screw. Worked well with PLA - it does have a bit of flex, but if it breaks it's five minutes to print another. Printed…
Gridfinity-compatible storage tray for iFixit 54 Bit Driver set. Heavily inspired by the storage box/tray that comes with the set, but the 1/4" adapter was moved to make everything fit in 2x4 Gridfinity squares. No magnet holes. I've…
Tool that helps you center the holes for a minifix furniture fasteners You need some kind of dowel jig - I used “Wolfcraft dowel master” There are probably 3d printed ones, since it's relatively simple tools
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
Parametric Multifix type A Toolholders: Standard tool holder: MultifixA_Holder.stl V groove tool holder: MultifixA_VHolder.stl Dial Indicator holder: MultifixA_DialIndicatorHolder.stl Concentricity Pusher Holder:…
Voronoi Crucifix Hole in bottom to remove supports. The .obj file has no hole if that is needed.
I remixed this usefull model with some things I found when I was using it. I added a pointer in the front of the model, to center it to a measure line drawed in the wood. I modified the lateral hole to be used only with a 8mm bit, working…
The original tray for the Bit Driver Kit was made out of a flimsy plastic that gets brittle over time so i have designed a printable version to replace it. Update 05/08/2023 After speaking to @tswartz07_941440 it turns out there are 2…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D model depicting Jesus Christ on the Cross,…
A remix of JohnD920's iFixit Mako mount for RostaP's Honeycomb Storage Wall to reduce the amount of plastic used.
Gridfinity bin for holding up to 54 bits and an assortment of other small repair tools. Originally based on @georgag 's bin and modified to fit with the Gridfinity system and hold more tools.
Fits perfect on my ifixit tweezer set.
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
This is a remixed version of the Crucifix from Ardesi_Marco. I added a flat bottom to it, as it was lacking one. Category: Sculptures
Because I'm a T-nuts system fan I had to remix this one. Two mounting holes should be more than enough to keep this one steady on the Skadis. Took this model because it's not a massive print and it looks really nicely finished with the…
Essentially a “shoe" that adapts your existing Mako Driver 64-bit kit to Gridfinity. It made more sense to me to keep using the existing layout than design a new thing from scratch. You can leave the lid on, but I prefer to stick that to…
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
This adapter takes the small 4mm bits from IFixit and adapts them to the ¼" bit size of the LTT screwdriver. It is fairly low torque as the version I have printed will spin inside the ¼" tip of the LTT screwdriver It will print nearly…
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated. Be advised, I have an…
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
Base for Omnifixo - Third-hand A 3D printed base for your Omnifixo. An enclosure that allow you to store the “hands” and makes it easier to use on the go! It have been helping me a lot since I am always on the move. There are 2 slots for…
i have printed these on my ender 3 with some nice PETG in 0.15 layer height
If you are unfamiliar with the Omnifixo, it is by far the best “helping hands” system I have used for soldering. https://omnifixo.com I wanted to create an compact footprint Omnifixo case that was also compatible with Gridfinity. The…
This allows you to use your iFixit bits in your LTT screwdriver. The magnet does go through the plastic base so the bit doesn't fall out.
Sometimes companies make screws hard to reach. This part extends the Ifixit screwdriver at about the same diameter as the tip. Make sure you print it at the long flat face down, there is a key in the model that should help you find it.…
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
I just added the Skadis Hooks made by Printables user Rod. Will add to that part, too. added three of Rods Delta model, just to be safe, as the Manta is a bit heavier. Just to be on the safe side.
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
I like to save cases and boxes and it's an issue. With this iFixit Moray screwdriver set you can not only save the case that it comes in but also have a Gridfinity adaptation. All you need to do is print the holder and insert the foam…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
iFixit Driver Kit Pegboard Holder A pegboard holder for iFixit's driver kits "64 Bit" (Nowadays also called "Mako") and "Mahi". Maybe other kits are also compatible, but I only tested those two.. Printing and assembly I printed the model…
Created for discontinued tool it (https://www.ifixit.com/News/14199/new-54-bit-tool-kit-from-ifixit).
I could not find a multifix B holder, so i made one myself! 6mm holes
I have both the iFixit Manta & LTT Store driver, I wanted to keep them together in a way that stacked well with my tools. I made this box to let me keep the original Manta case intact. You will need 6 M3x30 screws. As always, I've…
iFixit Screwdriver Mount works for Mako and Mahi. Modified @DavidsGotWood's mount to work with @tchoupshop_82950's low profile T-clips. Download the low profile T-Clips here: Link
Compatibility This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers. General It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height…
Tištěno z PLA+ Mladeč, magnety 10x3mm od Unimagnet.
This is a replacement lid for the iFixit Mako driver kit. It's my favorite kit and I lost mine awhile ago. Includes screw organizers at the bottom and a magnetic close like the original had. It was designed to use 5x2mm neodymium disc…
Simple HSW mount for the iFixit Pro rollup toolkit storage. Update (11/13/2023): Added a new model that includes a third peg towards the top of the model for stability on the wall. This one will probably require support.
Printed standing with support for the insert to the HSW
A tray for the Omnifixo M4.4 fieldbox to allow it to be removed with content and use Omnifixo vertically. Two versions are included: one with the layout of the original divider and one with larger compartments. Update: Added two versions…
Holder for multifix size A holders of a Latche Mount on the wall and slide the multifix over it. PET-G ore PLA works great
Designed for the typical 8x16 mini-lathe, might work for others. Use the “TEST_FIT” file for fitment testing. Use lock to secure positioning and prevent lifting during tool removal. Adjustment of each lock may be necessary for proper fit…
