59 models
Since all of the feet I could find were for the dGPU version I quickly modeled one for iGPU, because I couldn't get proper airflow when using on bed. Now it works perfect.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
This is a fairly specific part and I'm hoping someone else can use this replacement hinge for the Lincoln MigPak series welders. Printed out of PLA at first but it's too brittle, PETG works a lot better for this application.
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
Habe das Modell erstellt um das Formen der mini Pizzen für den PIZZARETTE oder EMERIO Pizzaofen zu erleichtern. Einfach den Teig in die "Schüssel" und diese Mittig mit den "Stempel" reindrücken. So entsteht ein schöner Rand und eine…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
3D print files for the MultiGP Pro Spec Frame
shoutout to Mando for the original prints https://www.printables.com/@ArmandoGalleg_314352
After i bought iGPSport bike computer with bundled holder, it turned out that i want also to mount gopro or flashlight to it. Unfortunetly it have some strange cross-like petrusion in down facing side. Of course i could replace this…
A few tweaked Pro Spec prints and arm covers
This model is copied from thingiverse and was made by kwmachine and submitted on July 06, 2018: "This hinged corner will allow you to make MultiGP gates that easily fold up for transport and storage. Now in multiple sizes (500 = 1/2", 750…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) I was trying to make a small server device with a spare ITX motherboard and needed a case quickly. As such, this design is pretty rudimentary. Edited 9/2/23: Small dimensional…
Printed pieces archive for the Pro Stock Frame. File title indicates what the part is.
There are a few apex-style lures here on thingiverse, but they all require you print them in a specific orientation that isn't optimal. I decided to make one that you print flat, heat back up with a heat gun, hair dryer, boiling water,…
A turtle fin for the MultiGP ProSpec frame designed to be easy and fast to print especially on smaller printers like a Voron V0. Print using TPU. I am using 15% Gyroid infill and 3 walls. Fusion file included for remixing.
A small collection of MultiGP Pro Spec 3d prints that I made and use!
This is a top plate for use on the MultiGP Pro Spec frame. It mounts a 5v fan above the VTX tray as well as slots in a Project399 arm LED grid from Tiny’sLEDs. The LED grid can pull up to 1.6A so I have a dedicated BEC VHB taped on the…
Arm protector for the MultiGP PRO SPEC frame. Print in TPU! It will require some force to get it onto the arm. It is mounted from the motor side. The motor is installed afterwards, the motor wires will go on top, over the protector to…
Aero (⌐ ■ ʖ ■) adapter to GoPro mounting system. Print without supports! Designed having in mind a lamp Bontrager ion 100R. Fits perfectly to iGPSport computer holder. Should be compatible with Garmin holders. Adapter visible on the…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) A further development of my previous PicoPSU Chassis to now include a single slot for a LP card. The idea is to flex the design in case I need to turn the computer into a router or…
A modified version of Sanderpuh's arm protector without the ridge for cob lights. Print in TPU
This MultiGP double gate hinge. I like this one better than standard articulating hinge because you can stack gates with this piece. Made this one to fit 3/4 inch PVC. Also included a coupling for joining pieces.
These were made for the local Sacramento MultiGP chapter. They print great with any silk PLA, no supports necessary, 2-3 perimeters with low infill. All five are the same size, but you can scale them as you like when slicing. If you'd…
MultiGP Pro Spec CNHL 70c 6s 2200mah battery sleeve. -Created a minimal battery sleeve to get my builds up to weight.
Hard boards for a paper logbook for geocaching The logboog_bigPET.svg file contains a logbook design of paper sheets. Created in Inkscape Paper size (pages) is 30x120mm Print instructions Version 1 - white Printed from PLA as one piece,…
Put a computer directly on the stem and fix it with just an o-ring.
Designed to be used with 3/4" PVC piping of any size. These are meant to be modular so that you can make various different combinations to build any basic track you want using the pieces. Optionally covered with jumbo pool noodles for…
A modification to suit Foxeer Predator Nano v5. I found best result from printing face down with auto tree supports and supports excluded from the rectangle around the camera
Hello, I present my IGPSPORT bike computer mount. I've prepared a mount for the computer and a mount for the handlebar. The components require welding in four 3mm threaded inserts. Two to connect the computer mount to the mount, and two…
The channels in the model are made for 24v cobb leds. I suggest putting a BT2 connector or MR30 to completely remove the top plate for ease of repairs. Update: Made the fin taller in “v2 taller” file
A simple, strong universal hanging bracket designed to keep your sim racing setup clean and organized. Perfect for: Headphones / headsets VR controllers VR cables Anything that needs a solid hanging point This bracket is built to print…
The M80 mount comes witha a rubber ring for 31.8mm handlebars, so I made my own 25.4mm version from TPU. Print settings: 3 walls, 25% infill (Gyroid), no support
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the lovable Sackboy from LittleBigPlanet to your…
handlebar bike mount for iGPSPORT bicycle computer You will additionally need an insert from the purchased bicycle computer mount. Крепление на руль для компа IGPsport for 60mm steam and more Вам дополнительно понадобится вставка из…
IKEA SKADIS Mount for a Classic FiGPiN
Printed using Bambu TPU for AMS (Hard TPU) using standard settings. If you put tabs up, and the large circle on the print bed, that will minimize support required. Uses M8 hardware into a 1.5" spacing aluminum extrusion rig. Contact me if…
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
This model is copied from thingiverse and was made by varndizzle125 and submitted on April 08, 2018: "These are adapters meant to allow you to use stakes and rebar for your MultiGP Flags instead of the stakes provided with them. I have…
Für die kleine Kantenfräse habe ich nach einer Alternative zu der mitgelieferten Grundplatte gesucht um z.B. Dübel und Kanten zu bündig zu fräsen. Die o.g. Kreisschneideschablone wurde verändert und getestet. Hauptänderung: Platte nach…
HDZERO upgraded lens cam mount with gopro mounting on top
A personal rendition of an existing Framework 16 iGPU stand! This version I've made a bit taller for my use case, which was having the Framework 16 at an acceptable ergonomic height relative to my desk height. This version of the stand is…
This is a small Cigpet Capo vape stand designed to make the vape stand more stable on the table. The stand has a cutout, so nothing prevents you from leaving the vape charging while it is in the stand. Print Settings Printer Brand:…
Prints flat, words might not turn out correctly unless you size it bigger. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: .2 Infill: 100 Category: R/C Vehicles
These connector pieces can be used to build MultiGP gates for drone racing. I've tried to upload every conceivable combination for all gates you might want to create. If you are missing a connection option just let me know and I can…
This clip is made to mount an Adafruit PA1010D MiniGPS module on Pimoroni's RP2350-based 'Badgeware' line of wearables. Tested with the Tufty 2350 , it should work on other Badgeware, too, as long as it has the same top clip hole. For the…
I went to BlizzCon and came home with a few FiGPiNs. I'm not a collector, but I loved them, so I designed a small stand to display them. I've only tested it with the pins I own. If yours is taller, you can scale the height up a bit. My…
Es gibt scheinbar Teigportionierer. Diese kann man aufrecht hinstellen. Dann läuft aber der Teig immer zum Boden. Viel besser wäre es, man könnte den Portionierer auf den Kopf stellen. Dafür bräuchte man aber einen extra Verschluss, der…
Fit for RC18D RUNCAM Nano90 camera and analog runcam racer4 camera
Stacksaver, Printed mine in PETG to withstand heat, used normal supports and layer thickness was 0.1 Boots i used TPU and tree supports set to build plate only. (They to be held on with a dab of superglue on each end) Arms i used PETG…
A small collection of MultiGP Pro Spec 3d prints that I made and use!
A turtle fin for the MultiGP ProSpec frame designed to be easy and fast to print especially on smaller printers like a Voron V0. Print using TPU. I am using 15% Gyroid infill and 3 walls. Fusion file included for remixing.
A modified version of Sanderpuh's arm protector without the ridge for cob lights. Print in TPU
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
Fit for RC18D RUNCAM Nano90 camera and analog runcam racer4 camera
Habe das Modell erstellt um das Formen der mini Pizzen für den PIZZARETTE oder EMERIO Pizzaofen zu erleichtern. Einfach den Teig in die "Schüssel" und diese Mittig mit den "Stempel" reindrücken. So entsteht ein schöner Rand und eine…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
handlebar bike mount for iGPSPORT bicycle computer You will additionally need an insert from the purchased bicycle computer mount. Крепление на руль для компа IGPsport for 60mm steam and more Вам дополнительно понадобится вставка из…
Hello, I present my IGPSPORT bike computer mount. I've prepared a mount for the computer and a mount for the handlebar. The components require welding in four 3mm threaded inserts. Two to connect the computer mount to the mount, and two…
Put a computer directly on the stem and fix it with just an o-ring.
