MultiGP Pro Spec Frame Fan and LED top plate

This is a top plate for use on the MultiGP Pro Spec frame. It mounts a 5v fan above the VTX tray as well as slots in a Project399 arm LED grid from Tiny’sLEDs. The LED grid can pull up to 1.6A so I have a dedicated BEC VHB taped on the under side to power LEDs and the fan. The fan mounts with using 2mm thick M3 nuts and 10mm M3 button head screws.

I rarely use CAD so feel free to modify the attached fusion 360 file and improve.

Print settings:

-Recommend using PETG

- Supports enabled

-4 walls as perimeter

-20% infill

-0.2 layer height

-Print with the side touching the build plate and a brim to reduce supports

Materials:

LED grid: https://tinysleds.com/products/project399-practice-rig-arm-led?_pos=4&_sid=0eb8b8f0a&_ss=r

BEC: https://wrekd.com/products/iflight-2-8s-micro-5v-or-12v-bec?_pos=1&_sid=11a01738c&_ss=r

5v Fan: https://www.amazon.com/dp/B0792BW2VH?psc=1&ref=ppx_yo2ov_dt_b_product_details

Use 300LSE Double Side Tape to mount LEDs to print.

Nuts to mount fan (2mm thick M3): https://wrekd.com/collections/m3-hardware/products/m3-knurled-standoff-w-small-step-5pc-choose-your-color-size?variant=45414199460144

Note: Pink plate pictured was an early version where I was finding airflow from flying messed with the fan spinning and gave electrical noise back into the BEC. So I removed the fan hole on the plate in later versions.