Search results: imet

Sort order

981 models

P
PrintablesPadu

Box with living hinge perimeter - Boite pourtour charnière vivante

For the axis of the lid, pass filament through the holes then cut to length. Pour axe du couvercle, passer du filament dans les trous puis couper à la longueur.

Print approx. €4.26–€5.20 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
8
Rating
5
P
Printablesjflick

Kaiweets KM601 multimeter holder

I made this holder so that I could suspend the Kaiweets KM601 meter underneath a shelf. The KM601 has the test lead connections on the bottom of the meter, which is problematic. Because of the test lead entry, I made the holder so that…

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
6
Rating
0
P
PrintablesQED_Maestro

Multimeter (DMM) probe tweezer

Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.

Downloads
20,835
Likes
5,669
Rating
4.85
P
PrintablesPrint@Hive

multimeter tweezers

A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…

Downloads
4,567
Likes
1,394
Rating
4.29
P
PrintablesCrazy_engineer!

Multimeter probe tweezer

This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…

Downloads
4,277
Likes
940
Rating
4.73
P
PrintablesMateusz Tokarz

One-Hand Multimeter Probe Tweezer Adapter

BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…

Downloads
2,779
Likes
972
Rating
4.9

Harry Potter Timeturner Fidget Toy

Harry Potter Timeturner Fidget Toy 3 styles 1. center is flat sided and engraved words 2. center is rounded and engraved words 3. center is rounded and embossed words. All files come with both one and two chain holes to pick from to make.

Downloads
2,725
Likes
551
Rating
4.6
P
Printablesorax

Parametric Cable Organizer (Single Perimeter / Vase Mode)

After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…

Downloads
2,379
Likes
598
Rating
4.9
P
PrintablesTrueShocker

HSW Multimeter Holder

I wanted to put my DM830D multimeter on my honeycomb storage wall, so i made this part. Sharing it in case someone has the same need…

Downloads
2,136
Likes
442
Rating
4.9
P
PrintablesBlue Hazel

Perimeter Origami Lampshade

Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…

Downloads
2,114
Likes
832
Rating
4.86
P
PrintablesMDHR

Rugged Multimeter Box With Insert (AstroAI DT132A)

A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…

Downloads
1,859
Likes
739
Rating
5
P
Printablesmrusk

Altimeter for Flight Simulation

The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…

Downloads
1,816
Likes
210
Rating
5
P
PrintablesDirkvK

Flexi Dimetrodon print in place dinosaur

Inspired by the awesome flexi dino's by https://www.printables.com/@AndreasJoskaSutanto I decided to try to make one myself. After having spent many hours of modelling, trying to get the sail on it's back right, I read some background…

Downloads
1,768
Likes
240
Rating
5
P
Printableskanga

Caliper (Centimeters)

A simple caliper design to measure objects up to 15 centimeters :) happy printing

Downloads
1,647
Likes
180
Rating
4.8
P
PrintablesWavz3D

Multimeter probe tweezers

Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.

Downloads
1,613
Likes
175
Rating
4.94
P
PrintablesVoenie

rugged box for cheap multimeter

Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…

Downloads
1,217
Likes
394
Rating
4.8
P
PrintablesMartin

Semi Circular Protractor 180 Degree Angle, Ruler Centimetres & Millimetres

Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm

Downloads
1,154
Likes
81
Rating
5
P
PrintablesYEHALABS

Digital Multimeter (DMM) Probe Tweezer

Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…

Downloads
1,062
Likes
392
Rating
5
P
PrintablesWarlock Til

Multiboard multimeter mount

Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…

Downloads
1,034
Likes
111
Rating
5
P
PrintablesPaulden2745

Multimeter Hardcase

I made this hardcase for my multimeter and the accessories, but can used for other purpose

Downloads
971
Likes
329
Rating
5
P
Printablessnuggl8tor

Harry Potter Timeturner

This model comes with 7 printable parts. I super glued the nubs/handles on the sides. The only supports needed are for the nubs/handles. The hourglass is printed in two parts so you can easily make a mold out of them and then use that…

Downloads
916
Likes
360
Rating
5
P
PrintablesJA:GR

Dice Roller Tower with perimeter

A remix of the SpaceDog3D model with perimeter

Downloads
870
Likes
66
Rating
5
P
PrintablesKinchey

Multimeter Box

A remix of the parametric toolbox to hold the Aldi Ferrex multimeter. The multimeter dimensions are: 175mm x 95mm x 45mm. The box has space for the manual underneath, the prong things on the right, and some sticky foam from bunnings to…

Downloads
862
Likes
126
Rating
5
P
PrintablesCaptainBobSim

Cessna 172 Altimeter for Flight Simulator

The Cessna 172 Project Altimeter Bill 'o Materials: 📦 3D Printed Parts 📦 Arduino Mega 2560 (can be shared with other components) 📦 Decal (You can use a shipping label) 📦 (8) M3x6mm screws 📦 (4) M3x20mm countersunk screws 📦 (3) BYJ-48…

Downloads
856
Likes
72
Rating
5
P
PrintablesWoj

Tweezer Multimeter Mod

This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…

Downloads
789
Likes
181
Rating
4.88

Multimeter holder for Honeycomb storage wall

Hole for M3 hardware. No supports needed.

Downloads
751
Likes
103
Rating
4.67
P
PrintablesPaul

Skadis Multimeter Mount

Designed around the low cost Kaiweets KM100 model multimeter. The cutouts allow storage and use while mounted. Print using supports for the pegs on the back of the holder.

Downloads
734
Likes
150
Rating
5
P
PrintablesJustin Miller

Dimensional Accuracy Test - Millimeters

I whipped this small test design up to check the dimensional accuracy of my printer. This will print circles and squares of various sizes as holes and towers that can be measured to verify accuracy and determine any dimensional…

Downloads
718
Likes
42
Rating
4.6
P
PrintablesNickSoft

Multimeter Tweezers Remix

I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped. Even though I redesigned the…

Downloads
713
Likes
263
Rating
4.83
P
Printablesmathiasl

Multimeter Holder for Honeycomb Storage Wall

Remix of Libor z Radotína multimeter holder to fit the original Honeycomb storage wall and I also had to make a longer version to fit my multimeter (UNI-T UT133B). Uses M4 insert to attach it to the wall. Link to a collection of my other…

Downloads
684
Likes
135
Rating
5
P
PrintablesNoWarrenty

Gridfinity Multimeter Stand

For Multimeters with size of ~90x~42x~200. Includes cable Routing, Probe- and Thermistor Storage. Sources Included. My rubber-sided multimeter with 90mm width sits tight in there, i can turn the knob without it moving.

Downloads
644
Likes
141
Rating
5
P
PrintablesHobbesdcc

Multimeter Pegboard Holder

Pegboard holder for a Multimeter, One with the Pegs already in it and one with the pegs as separate parts (good if you just want mounting holes instead) Version 2: Has the PEGS BUILT IN! and Custom in model SUPPORTS for the pegs!! Print…

Downloads
637
Likes
130
Rating
5
P
PrintablesCoat

Nice case for your Multimeter or...

A nice and sturdy case for your multimeter or something else. Unscaled the max. measurements for the multimeter are 200x100 mm. The outer size is max. 208x170.6 mm (lid). Included is a version with and without "Multimeter" at the outside.…

Downloads
570
Likes
81
Rating
4.88
P
PrintablesBlackcrow

Harbor Freight Multimeter Probe Holder

Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…

Downloads
566
Likes
163
Rating
5
P
PrintablesMeister Edel

Ultimate turbo Funnel Vasemode & 2 Perimeter + Strainer

Hoioioioi Here I have my Version of a TURBO Funnel xD … Well ok I have many different options for you to choose of! Also you can scale the Funnel to your desired dimension! Parts explanation: Vasemode Vasemode : This Funnel is designed…

Downloads
524
Likes
108
Rating
5
P
Printablesitscollin

Multiboard Multimeter Holder

A simple holder for a multimeter. Built for the multiboard using the multiconnect system. Same/similar design as https://www.printables.com/model/781857-multiboard-multimeter-mount except sizing of large side is: 80w x 40d x 80h.

Downloads
523
Likes
86
Rating
5
P
PrintablesMeister Edel

Turbo Funnel XXL Big Opening! Vasemode, 2 Perimeter, Scaleable

This is a Version of my Turbo Funnel that I created for bigger stuff like Silicagel, dry food or other bulky stuff. This 3D-printed funnel features an extra-large outlet, allowing for fast and smooth flow—perfect for transferring coarse…

Downloads
515
Likes
186
Rating
4.71
P
Printableszyzzyva

Multiboard Multimeter Mount

A simple mount for a multimeter, fits up to up to 94x42mm and has additional slots for leads or other accessories.

Downloads
515
Likes
73
Rating
5
P
PrintablesFruitieX

Gridfinity multimeter holder

Link to the crappy multimeter I have: https://www.clasohlson.com/fi/Yleismittari-UNI-T-UT132E/p/Pr365256000 I've printed a 1x1x12 plain bin to hold the probes/cables in place. Use magnets + weighted baseplates to prevent these from…

Downloads
502
Likes
138
Rating
4.5
P
PrintablesJoe-Joe Joe

Case multimeter DT830D

Simple box for multimeter DT830

Downloads
485
Likes
176
Rating
5
P
PrintablesSimplyHong

Multimeter Pegboard Holder (Skadis)

[Updated version 2.0 here] Print upright with support enabled. Very important: the inserts are meant for ikea skadis pegboard, not tested on different other pegboards. 13 July 2023 Update: If you have printed the original holder, there…

Downloads
484
Likes
74
Rating
4.83
P
Printablesswablab e.V.

HSW Multimeter holder

A holder for a multimeter up to 94x42mm with additional holders for the test leads.

Downloads
474
Likes
69
Rating
5
P
Printablesyetzt

Skadis Multimeter Holder

A simple holder for a generic Multimeter, 72×52mm box size and ⌀10mm Probe holders. Builtin support for the hooks that easily snip off with flush cutters, no other support needed. Walls are 1mm Derived from a Skadis Storage Box by…

Downloads
459
Likes
63
Rating
4.4
P
PrintablesLuu Lac

Single-Perimeter Rocket FIXED & REMIXED

I got frustrated with trying to get the original ( https://www.thingiverse.com/thing:458903 ) to print right so I remodeled the entire thing up in Fusion360 with a flush bottom. I've also added a modified version for easier printing and…

Downloads
452
Likes
23
Rating
4.86
P
PrintablesLyrkan

Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter

This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…

Downloads
434
Likes
84
Rating
5
P
PrintablesJoshua Venter

Multimeter Holder (HSW)

I liked @TrueShocker ‘s Multimeter design however my old multimeter was slightly too large to fit, so I created a slightly larger holder from scratch, based on on @TrueShocker ’s design. Enlarged the holder area and also the holes for the…

Downloads
418
Likes
60
Rating
5
P
PrintablesErremartin

Rugged box for Parkside multimeter

In this remix, the Parkside brand logo was added and custom made to fit the multimeter just right, also leaving a space at the top and bottom to put foam so that the tool is not damaged. Necessary materials 6 m3x30 screws.

Downloads
418
Likes
113
Rating
5
P
PrintablesHesed

Multimeter Mount

This multimeter mount was designed specifically for an AstroAI DM6000AR. However if might work for other multimeters as i have not tried.…

Downloads
414
Likes
48
Rating
5
P
PrintablesKim-Janosch

IKEA SKADIS Multimeter Holder

Multimeter on the wall, upright and ready to use. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Frees up space on your workbench…

Downloads
411
Likes
93
Rating
5
P
Printablesadam0909

Skadis holder for Parkside multimeter

I wanted to create a multimeter holder for my Skadis board in which all the buttons are still reachable because most of the time I only need for 1 or 2 quick measures. I also added a cable holder to the right so everything can be tucked…

Downloads
407
Likes
83
Rating
4.83
P
PrintablesTycheMiner

MultiMeter Desktop Stand

This is a Stout MultiMeter Desktop Stand that also has a stow place for the leads and cables. The multimeter sits secure in a slight rear angled recessed mount. I have tried countless stands from different sites and all kept falling over…

Downloads
405
Likes
157
Rating
5
P
PrintablesStormWatcher

Articulated Dimetrodon skeleton.

An articulated Dimetrodon skeleton. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.

Downloads
402
Likes
122
Rating
5
P
PrintablesHovdis

Gridfinity - multimeter holder

As I wanted my multimeter in a drawer, and all I saw online was holders for multimeters standing tall. So then I made this :) I made the general shape of the bin pretty generous, so I'm guessing most normal multimeters will fit. Aswell as…

Downloads
399
Likes
82
Rating
5
P
Printablesrotanimal

Honeycomb Wall Multimeter Holder

I couldn't find a multimeter holder that fit my model so I made one. I copied Ian Noriega Nunez's probe attachment idea. The inside is 69mm x 35 mm. Prusasliser gives a warning about the overhangs but it printed perfectly on my MK3S+.

Downloads
391
Likes
77
Rating
5
P
PrintablesCuddle Trouble

Multimeter Probe Tweezers (TPU)

I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…

Downloads
373
Likes
271
Rating
5
P
PrintablesAxField

Fluke Multimeter holder for HSW

A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.

Downloads
371
Likes
52
Rating
5
P
Printablesctheroux

Parametric Multimeter Probe Tweezer

This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…

Downloads
368
Likes
75
Rating
4.5
P
PrintablesGabC

Skadis multimeter holder

This tray is designed around an Extech MN16A multimeter but it can work with others. Requires 2 of my universal peg plates . Print with supports. The holder could be used with other pegboard systems if you design peg plates for it.

Downloads
360
Likes
99
Rating
5
P
PrintablesMZ4250

Dimetrodon

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
360
Likes
63
Rating
0
P
PrintablesDavid

Peg for perimeter/guide-wire

Peg for holding down the perimeter/guide wire for robot lawn mowers. Print instructions Prints fine with 0.3 layer height with PETG/PLA.

Downloads
348
Likes
46
Rating
4.9
P
Printablesespn8-theocho

MissileWorks RRC3 Altimeter

I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…

Downloads
345
Likes
11
Rating
5
P
PrintablesSkyberries

Multimeter lead backpack

I made this little clip on backpack to wrap the wire of my multimeter leads around to keep things a little more tidy. Super handy print jajaum3d! top notch work. I fixed the two peices with some M3 flathead screws, but you could also just…

Downloads
340
Likes
197
Rating
5
P
Printablesspuder

Peg Board Multimeter holder

Holds a multimeter to a pegboard. Works with my particular multimeter which is slightly more than 2 inches wide. Can also work with multimeters that are exactly 2 inches wide (by printing two of the same part), or meters that are slightly…

Downloads
336
Likes
99
Rating
5
P
PrintablesKamil

Multimeter holder

UNIT-T UT61E multimeter holder

Downloads
334
Likes
56
Rating
4.5

Skadis Multimeter Holder Voltcraft

Multimeter Halter Voltcraft VC130 IKEA Skadis

Downloads
332
Likes
38
Rating
4.33
P
PrintablesJan

Board mount for Owon XDM 1041 Benchtop multimeter

Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.

Downloads
326
Likes
33
Rating
5
P
PrintablesShabubu

Multimeter Pegboard Holder

Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/7fvnORfahl8-kaiweets-multimeter-pegboard-holder Print…

Downloads
316
Likes
47
Rating
5
P
PrintablesBrad @ FTBT 3D

Curvier Multimeter Holder - HSW

This is a remix of the multimeter holder by TrueShocker. I just made it curvier with less harsh corners to fit the aesthetic of my other HSW holders. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part of…

Downloads
310
Likes
49
Rating
5
P
Printablesdereki22

Honeycomb Wall Multimeter Holder

This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall It should be large enough to hold most multimeters, I designed it to be a snug fit with the Fluke meter I have.

Downloads
310
Likes
52
Rating
5
P
PrintablesKrzysztofGW

BSIDE Multimeter (DMM) Probe Tweezers

Thanks to @QED_Maestro for his brilliant idea of simple tweezers for one handed measurements. Now optimised for BSIDE DMMs. Compatibility: A10 S10 S11 S20 not with S30 / S30X In the photo is the RC ;)

Downloads
303
Likes
26
Rating
5
P
Printablesjonnybergdahl

Multimeter Probe Holder

This is a multimeter probe holder for 4 probes. I have included the Fusion360 design files for easy remixing.

Downloads
302
Likes
39
Rating
5
P
PrintablesMike Stanbro

Rugger Box for a UNI-T UT-210E Multimeter

This is a remix of the popular parametric Rugger Box design by Whity. I used the author's Fusion 360 CAD file to adjust its size and then added a custom liner that fits the outline of the multimeter. The lid was also modified to provide…

Downloads
299
Likes
95
Rating
5
P
PrintablesMaschbauboy

Rugged Voltcraft Multimeter Box

I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…

Downloads
298
Likes
33
Rating
5
P
Printablesaspoon

AstroAI DM6000AR Multimeter Skadis Mount

Just a quick remix to allow herman_v96's multimeter mount to fit an IKEA Skadis board. The universal hook from CSD_Salzburg is also included. Just print the mount and two hooks and you are good to go! Print Settings Printer Brand:…

Downloads
288
Likes
29
Rating
5
P
Printablesmathewsamuel

HSW - AstroAI AM33D Multimeter

Very minimal supports are needed for the mounting bracket. This is optimized to save space on the wall. It also has storage in the rear. You can store the lead cables there.

Downloads
266
Likes
69
Rating
5
P
Printablesmakaaberi

Multimeter holder for Ikea Skådis

Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. My multimeter is about 70mm wide and 26mm thick.

Downloads
266
Likes
47
Rating
5
P
Printablesdavid.h61

Hanna Colorimeter Test Kit Holders

Test kit organizers for Hanna Colorimeters Phosphate, Nitrate and Alkalinity for Saltwater Aquarium Water

Downloads
262
Likes
12
Rating
5
P
PrintablesactualSIZE

Micro SDimetrodon

Here's a little dinosaur that holds six Micro SD cards. Print instructions Instead of starting from scratch, I decided to remix my Stego-Storage USB holder. This time it's much smaller, a Micro-SD holder, and more like a Dimetrodon than a…

Downloads
256
Likes
78
Rating
5
P
PrintablesMeister Edel

2 Perimeter 0,4 & 0,6 mm Nozzle: Simple & fast Q-Tip & Cotton Pad Holder

The original is much too thick, the remix was too thin and small - so I invested the 5 minutes and quickly constructed my own little holder. Optimised for 0.6 mm nozzles (2 perimetres) but also 0.4 mm nozzles should print this design…

Downloads
255
Likes
42
Rating
0
P
Printablescreateminds

HSW Multimeter Holder Uni-T

Created this HSW holder for my multimeter. Holds a Uni-T UT61D and similar sized multimeters nicely. Unlike other holders, this one is rotated by 90 degrees to reduce the footprint on the wall. Height with multimeter 18cm, depth in front…

Downloads
255
Likes
30
Rating
4.67
P
Printableskstuken

HSW Multimeter Holder

A holder to attach my Amazon Commercial Multimeter to my honeycomb storage wall. I have taken idea and design from TrueShocker's model, which unfortunately was too small for my multimeter. This model is a re-design from scratch, though.…

Downloads
254
Likes
45
Rating
5
P
PrintablesDm+

multimeter probe holder for easy one-handed changing

Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.

Downloads
253
Likes
23
Rating
0
P
Printablesbodgerator

HSW Multimeter Mount - Side Storage & HSW Pegs

Storage for multimeters of a “Shield” style shape (modelled after a Etekcity Digital Multimeter). Side clips allow loose storage of probes with compartment for loose cabeling. Rear contains x2 Hex Pegs for HSW

Downloads
253
Likes
52
Rating
5
P
PrintablesKenneth Tan

Aneng 622B Multimeter Desktop Stand.

The perfect stand for the Aneng 622B on your desktop. In the version in photo, the upper Probe clamp is present. In the STL there is also a lower clamp to give the probes more stability. Print this stand on the left side with 20% infill…

Downloads
250
Likes
22
Rating
4.5
P
Printablesndoktor

Multimeter Probe Cover

I modeled this to replace misplaced covers for my Fluke 115 Multimeter probes using another meter as reference. Printed in Octave black PLA and Polymaker red PLA. Print Settings Printer: Cetus Rafts: Yes Supports: Doesn't Matter…

Downloads
249
Likes
33
Rating
5
P
PrintablesSudonem

Craftsman Multimeter Pegboard Mount

This is a dead simple pegboard / wall control mounting cradle for my trusty Craftsman 82029 Auto-ranging Multi-meter. This is one of my first designs from years ago and could likely use some refinement - but it's been pretty popular on…

Downloads
242
Likes
53
Rating
5
P
PrintablesRo3Deee

Omega Tweezers for multimeter probes

Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.

Downloads
237
Likes
78
Rating
5
P
PrintablesH3dSprint

Box for multimeter with rotary lock

Design goals: store the multimeter with connected measuring cables in a box cover of box shall have a lock multimeter box shall stand stable if cover is opened to perform measurements Design: All designed parts of the box are printed out…

Downloads
235
Likes
64
Rating
5
P
PrintablesShabubu

Multimeter Multiboard Holder

Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/htkaNsVCoCQ-kaiweets-multimeter-multiboard-holder Print…

Downloads
235
Likes
43
Rating
5
P
PrintablesPaolo

Multimeter FLUKE 87 III - probe tweezer

Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks

Downloads
230
Likes
30
Rating
3
P
PrintablesPIZZA_CAT

DT830B DIGITAL MULTIMETER STAND

STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!

Downloads
225
Likes
34
Rating
5
P
PrintablesPascal

Aneng AN8008 Multimeter Skadis Holder

Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization

Downloads
222
Likes
30
Rating
5
P
PrintablesPhobos

Large Multimeter Holder for Honeycomb Storage Wall (HSW)

Just a simple rectangular box with slightly rounded edges (1mm radius). Needs 2 x M3 inserts in the Honeycomb Storage Wall ecosystem. No supports needed.

Downloads
220
Likes
61
Rating
4.5
P
Printableskvn5x4

Fluke 179 Multimeter Storage - Gridfinity

Update 5/29/2025 I made a slight tweak to the model that reduced the floor of surrounding area around the tool. I lowered it to save on material, reduce overall print time, and make it easier to get it out of the bin. I've kept the…

Downloads
220
Likes
24
Rating
2
P
PrintablesRon

Multimeter holder for Honeycomb storage wall

Simple holder for my Multimeter, fits securely and has little holders on the side for the test leads. Mine is printed with PLA and it fits perfectly. You may need to resize slightly for your own multimeter.

Downloads
217
Likes
33
Rating
5
P
Printableslufa

HSW multimeter holder

Ich habe einen Halter entworfen in dem das Messgerät mit angesteckten Kabeln untergebracht werden kann. Die Fachgröße für das Messgerät beträgt 87x36 mm.

Downloads
217
Likes
39
Rating
4.5
P
PrintablesEumldeuml

Multimeter tweezers

As the name suggests, this quick print converts your multimeter into a one-handed tweezer-style measuring device. The tips are held with friction which is very strong due to the taper on the tips and the slight elasticity of the material.…

Downloads
213
Likes
74
Rating
0
P
PrintablesChad Margetts

Demon Slayer: Kimetsu no Yaiba Coasters

Created these coasters as a gift for my niece who likes anime. Kimetsu, Tanjiro, Kanao, Zenitsu & Innosuke are included

Downloads
213
Likes
35
Rating
5
P
PrintablesPaw Prints

Reinforced Multimeter Probe Tweezer/Holder

Recommended settings: 4+ walls and 100% infill for best strength. Please let me know in the comments if yours broke and where it can be reinforced!

Downloads
212
Likes
19
Rating
5