Wyniki wyszukiwania: imet

Sortowanie

981 modeli

P
PrintablesMateusz Tokarz

One-Hand Multimeter Probe Tweezer Adapter

BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…

Pobrania
2779
Polubienia
972
Ocena
4,9
P
PrintablesBlue Hazel

Perimeter Origami Lampshade

Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…

Pobrania
2114
Polubienia
832
Ocena
4,86
P
PrintablesJan

Board mount for Owon XDM 1041 Benchtop multimeter

Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.

Pobrania
326
Polubienia
33
Ocena
5
P
PrintablesactualSIZE

Micro SDimetrodon

Here's a little dinosaur that holds six Micro SD cards. Print instructions Instead of starting from scratch, I decided to remix my Stego-Storage USB holder. This time it's much smaller, a Micro-SD holder, and more like a Dimetrodon than a…

Pobrania
256
Polubienia
78
Ocena
5
P
PrintablesRo3Deee

Omega Tweezers for multimeter probes

Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.

Pobrania
237
Polubienia
78
Ocena
5
P
PrintablesPIZZA_CAT

DT830B DIGITAL MULTIMETER STAND

STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!

Pobrania
225
Polubienia
34
Ocena
5
P
PrintablesMike B

Mastercraft MultiMeter Box

As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…

Pobrania
132
Polubienia
18
Ocena
5
P
PrintablesTimon

Parametric Multimeter Probe Cap

Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)

Pobrania
131
Polubienia
24
Ocena
0
P
Printablesc-arts-modelle

Tutorial: Creating wings optimized for single perimeter printing

Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…

Pobrania
108
Polubienia
18
Ocena
0

HSW Emos MD-310 Multimeter mount

Remix of @forsaken_candy 's multimeter mount for Emos MD-310, or any multimeter that fits dimensions up to 74x32mm(length x width)

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesBlayne Bartter

Klein Multimeter/Voltmeter Holder

Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesGreen Joe

Layer 1 Perimeter Pressure Advance calibration tool

Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesArt3Design

Concentric Infill Coaster Diameter 75 mm 5 perimeters

Concentric Infill Coaster Diameter 75 mm 5 perimeters

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesREMLURELMI

Multimeter Strap Lead holder with Extra Fuse Storage

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Brim: Optional

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesPutocreo

Button Protector EXTECH EX330 multimeter (EX310 / EX320 / EX330)

If you use an "EXTECH EX330" multimeter (although this also happens with other brands), you may have noticed that sometimes when storing it, the "NCV" button gets pressed. This causes the batteries to drain. To solve this, you can use…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesQED_Maestro

Multimeter (DMM) probe tweezer

Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.

Pobrania
20 835
Polubienia
5669
Ocena
4,85
P
PrintablesPrint@Hive

multimeter tweezers

A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…

Pobrania
4567
Polubienia
1394
Ocena
4,29
P
PrintablesCrazy_engineer!

Multimeter probe tweezer

This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…

Pobrania
4277
Polubienia
940
Ocena
4,73

Harry Potter Timeturner Fidget Toy

Harry Potter Timeturner Fidget Toy 3 styles 1. center is flat sided and engraved words 2. center is rounded and engraved words 3. center is rounded and embossed words. All files come with both one and two chain holes to pick from to make.

Pobrania
2725
Polubienia
551
Ocena
4,6
P
Printablesorax

Parametric Cable Organizer (Single Perimeter / Vase Mode)

After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…

Pobrania
2379
Polubienia
598
Ocena
4,9
P
PrintablesTrueShocker

HSW Multimeter Holder

I wanted to put my DM830D multimeter on my honeycomb storage wall, so i made this part. Sharing it in case someone has the same need…

Pobrania
2136
Polubienia
442
Ocena
4,9
P
PrintablesMDHR

Rugged Multimeter Box With Insert (AstroAI DT132A)

A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…

Pobrania
1859
Polubienia
739
Ocena
5
P
Printablesmrusk

Altimeter for Flight Simulation

The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…

Pobrania
1816
Polubienia
210
Ocena
5
P
PrintablesDirkvK

Flexi Dimetrodon print in place dinosaur

Inspired by the awesome flexi dino's by https://www.printables.com/@AndreasJoskaSutanto I decided to try to make one myself. After having spent many hours of modelling, trying to get the sail on it's back right, I read some background…

Pobrania
1768
Polubienia
240
Ocena
5
P
Printableskanga

Caliper (Centimeters)

A simple caliper design to measure objects up to 15 centimeters :) happy printing

Pobrania
1647
Polubienia
180
Ocena
4,8
P
PrintablesWavz3D

Multimeter probe tweezers

Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.

Pobrania
1613
Polubienia
175
Ocena
4,94
P
PrintablesVoenie

rugged box for cheap multimeter

Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…

Pobrania
1217
Polubienia
394
Ocena
4,8
P
PrintablesMartin

Semi Circular Protractor 180 Degree Angle, Ruler Centimetres & Millimetres

Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm

Pobrania
1154
Polubienia
81
Ocena
5
P
PrintablesYEHALABS

Digital Multimeter (DMM) Probe Tweezer

Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…

Pobrania
1062
Polubienia
392
Ocena
5
P
PrintablesWarlock Til

Multiboard multimeter mount

Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…

Pobrania
1034
Polubienia
111
Ocena
5
P
PrintablesPaulden2745

Multimeter Hardcase

I made this hardcase for my multimeter and the accessories, but can used for other purpose

Pobrania
971
Polubienia
329
Ocena
5
P
Printablessnuggl8tor

Harry Potter Timeturner

This model comes with 7 printable parts. I super glued the nubs/handles on the sides. The only supports needed are for the nubs/handles. The hourglass is printed in two parts so you can easily make a mold out of them and then use that…

Pobrania
916
Polubienia
360
Ocena
5
P
PrintablesJA:GR

Dice Roller Tower with perimeter

A remix of the SpaceDog3D model with perimeter

Pobrania
870
Polubienia
66
Ocena
5
P
PrintablesKinchey

Multimeter Box

A remix of the parametric toolbox to hold the Aldi Ferrex multimeter. The multimeter dimensions are: 175mm x 95mm x 45mm. The box has space for the manual underneath, the prong things on the right, and some sticky foam from bunnings to…

Pobrania
862
Polubienia
126
Ocena
5
P
PrintablesCaptainBobSim

Cessna 172 Altimeter for Flight Simulator

The Cessna 172 Project Altimeter Bill 'o Materials: 📦 3D Printed Parts 📦 Arduino Mega 2560 (can be shared with other components) 📦 Decal (You can use a shipping label) 📦 (8) M3x6mm screws 📦 (4) M3x20mm countersunk screws 📦 (3) BYJ-48…

Pobrania
856
Polubienia
72
Ocena
5
P
PrintablesWoj

Tweezer Multimeter Mod

This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…

Pobrania
789
Polubienia
181
Ocena
4,88

Multimeter holder for Honeycomb storage wall

Hole for M3 hardware. No supports needed.

Pobrania
751
Polubienia
103
Ocena
4,67
P
PrintablesPaul

Skadis Multimeter Mount

Designed around the low cost Kaiweets KM100 model multimeter. The cutouts allow storage and use while mounted. Print using supports for the pegs on the back of the holder.

Pobrania
734
Polubienia
150
Ocena
5
P
PrintablesJustin Miller

Dimensional Accuracy Test - Millimeters

I whipped this small test design up to check the dimensional accuracy of my printer. This will print circles and squares of various sizes as holes and towers that can be measured to verify accuracy and determine any dimensional…

Pobrania
718
Polubienia
42
Ocena
4,6
P
PrintablesNickSoft

Multimeter Tweezers Remix

I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped. Even though I redesigned the…

Pobrania
713
Polubienia
263
Ocena
4,83
P
Printablesmathiasl

Multimeter Holder for Honeycomb Storage Wall

Remix of Libor z Radotína multimeter holder to fit the original Honeycomb storage wall and I also had to make a longer version to fit my multimeter (UNI-T UT133B). Uses M4 insert to attach it to the wall. Link to a collection of my other…

Pobrania
684
Polubienia
135
Ocena
5
P
PrintablesNoWarrenty

Gridfinity Multimeter Stand

For Multimeters with size of ~90x~42x~200. Includes cable Routing, Probe- and Thermistor Storage. Sources Included. My rubber-sided multimeter with 90mm width sits tight in there, i can turn the knob without it moving.

Pobrania
644
Polubienia
141
Ocena
5
P
PrintablesHobbesdcc

Multimeter Pegboard Holder

Pegboard holder for a Multimeter, One with the Pegs already in it and one with the pegs as separate parts (good if you just want mounting holes instead) Version 2: Has the PEGS BUILT IN! and Custom in model SUPPORTS for the pegs!! Print…

Pobrania
637
Polubienia
130
Ocena
5
P
PrintablesCoat

Nice case for your Multimeter or...

A nice and sturdy case for your multimeter or something else. Unscaled the max. measurements for the multimeter are 200x100 mm. The outer size is max. 208x170.6 mm (lid). Included is a version with and without "Multimeter" at the outside.…

Pobrania
570
Polubienia
81
Ocena
4,88
P
PrintablesBlackcrow

Harbor Freight Multimeter Probe Holder

Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…

Pobrania
566
Polubienia
163
Ocena
5
P
Printablesitscollin

Multiboard Multimeter Holder

A simple holder for a multimeter. Built for the multiboard using the multiconnect system. Same/similar design as https://www.printables.com/model/781857-multiboard-multimeter-mount except sizing of large side is: 80w x 40d x 80h.

Pobrania
523
Polubienia
86
Ocena
5
P
PrintablesMeister Edel

Ultimate turbo Funnel Vasemode & 2 Perimeter + Strainer

Hoioioioi Here I have my Version of a TURBO Funnel xD … Well ok I have many different options for you to choose of! Also you can scale the Funnel to your desired dimension! Parts explanation: Vasemode Vasemode : This Funnel is designed…

Pobrania
523
Polubienia
108
Ocena
5
P
Printableszyzzyva

Multiboard Multimeter Mount

A simple mount for a multimeter, fits up to up to 94x42mm and has additional slots for leads or other accessories.

Pobrania
515
Polubienia
73
Ocena
5
P
PrintablesMeister Edel

Turbo Funnel XXL Big Opening! Vasemode, 2 Perimeter, Scaleable

This is a Version of my Turbo Funnel that I created for bigger stuff like Silicagel, dry food or other bulky stuff. This 3D-printed funnel features an extra-large outlet, allowing for fast and smooth flow—perfect for transferring coarse…

Pobrania
513
Polubienia
186
Ocena
4,71
P
PrintablesFruitieX

Gridfinity multimeter holder

Link to the crappy multimeter I have: https://www.clasohlson.com/fi/Yleismittari-UNI-T-UT132E/p/Pr365256000 I've printed a 1x1x12 plain bin to hold the probes/cables in place. Use magnets + weighted baseplates to prevent these from…

Pobrania
502
Polubienia
138
Ocena
4,5
P
PrintablesJoe-Joe Joe

Case multimeter DT830D

Simple box for multimeter DT830

Pobrania
485
Polubienia
176
Ocena
5
P
PrintablesSimplyHong

Multimeter Pegboard Holder (Skadis)

[Updated version 2.0 here] Print upright with support enabled. Very important: the inserts are meant for ikea skadis pegboard, not tested on different other pegboards. 13 July 2023 Update: If you have printed the original holder, there…

Pobrania
484
Polubienia
74
Ocena
4,83
P
Printablesswablab e.V.

HSW Multimeter holder

A holder for a multimeter up to 94x42mm with additional holders for the test leads.

Pobrania
474
Polubienia
69
Ocena
5
P
Printablesyetzt

Skadis Multimeter Holder

A simple holder for a generic Multimeter, 72×52mm box size and ⌀10mm Probe holders. Builtin support for the hooks that easily snip off with flush cutters, no other support needed. Walls are 1mm Derived from a Skadis Storage Box by…

Pobrania
459
Polubienia
63
Ocena
4,4
P
PrintablesLuu Lac

Single-Perimeter Rocket FIXED & REMIXED

I got frustrated with trying to get the original ( https://www.thingiverse.com/thing:458903 ) to print right so I remodeled the entire thing up in Fusion360 with a flush bottom. I've also added a modified version for easier printing and…

Pobrania
452
Polubienia
23
Ocena
4,86
P
PrintablesLyrkan

Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter

This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…

Pobrania
434
Polubienia
84
Ocena
5
P
PrintablesJoshua Venter

Multimeter Holder (HSW)

I liked @TrueShocker ‘s Multimeter design however my old multimeter was slightly too large to fit, so I created a slightly larger holder from scratch, based on on @TrueShocker ’s design. Enlarged the holder area and also the holes for the…

Pobrania
418
Polubienia
60
Ocena
5
P
PrintablesErremartin

Rugged box for Parkside multimeter

In this remix, the Parkside brand logo was added and custom made to fit the multimeter just right, also leaving a space at the top and bottom to put foam so that the tool is not damaged. Necessary materials 6 m3x30 screws.

Pobrania
418
Polubienia
113
Ocena
5
P
PrintablesHesed

Multimeter Mount

This multimeter mount was designed specifically for an AstroAI DM6000AR. However if might work for other multimeters as i have not tried.…

Pobrania
414
Polubienia
48
Ocena
5
P
PrintablesKim-Janosch

IKEA SKADIS Multimeter Holder

Multimeter on the wall, upright and ready to use. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Frees up space on your workbench…

Pobrania
411
Polubienia
93
Ocena
5
P
Printablesadam0909

Skadis holder for Parkside multimeter

I wanted to create a multimeter holder for my Skadis board in which all the buttons are still reachable because most of the time I only need for 1 or 2 quick measures. I also added a cable holder to the right so everything can be tucked…

Pobrania
407
Polubienia
83
Ocena
4,83
P
PrintablesTycheMiner

MultiMeter Desktop Stand

This is a Stout MultiMeter Desktop Stand that also has a stow place for the leads and cables. The multimeter sits secure in a slight rear angled recessed mount. I have tried countless stands from different sites and all kept falling over…

Pobrania
405
Polubienia
157
Ocena
5
P
PrintablesStormWatcher

Articulated Dimetrodon skeleton.

An articulated Dimetrodon skeleton. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.

Pobrania
402
Polubienia
122
Ocena
5
P
PrintablesHovdis

Gridfinity - multimeter holder

As I wanted my multimeter in a drawer, and all I saw online was holders for multimeters standing tall. So then I made this :) I made the general shape of the bin pretty generous, so I'm guessing most normal multimeters will fit. Aswell as…

Pobrania
399
Polubienia
82
Ocena
5
P
Printablesrotanimal

Honeycomb Wall Multimeter Holder

I couldn't find a multimeter holder that fit my model so I made one. I copied Ian Noriega Nunez's probe attachment idea. The inside is 69mm x 35 mm. Prusasliser gives a warning about the overhangs but it printed perfectly on my MK3S+.

Pobrania
391
Polubienia
77
Ocena
5
P
PrintablesCuddle Trouble

Multimeter Probe Tweezers (TPU)

I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…

Pobrania
373
Polubienia
271
Ocena
5
P
PrintablesAxField

Fluke Multimeter holder for HSW

A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.

Pobrania
371
Polubienia
52
Ocena
5
P
Printablesctheroux

Parametric Multimeter Probe Tweezer

This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…

Pobrania
368
Polubienia
75
Ocena
4,5
P
PrintablesGabC

Skadis multimeter holder

This tray is designed around an Extech MN16A multimeter but it can work with others. Requires 2 of my universal peg plates . Print with supports. The holder could be used with other pegboard systems if you design peg plates for it.

Pobrania
360
Polubienia
99
Ocena
5
P
PrintablesMZ4250

Dimetrodon

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Pobrania
360
Polubienia
63
Ocena
0
P
PrintablesDavid

Peg for perimeter/guide-wire

Peg for holding down the perimeter/guide wire for robot lawn mowers. Print instructions Prints fine with 0.3 layer height with PETG/PLA.

Pobrania
348
Polubienia
46
Ocena
4,9
P
Printablesespn8-theocho

MissileWorks RRC3 Altimeter

I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…

Pobrania
345
Polubienia
11
Ocena
5
P
PrintablesSkyberries

Multimeter lead backpack

I made this little clip on backpack to wrap the wire of my multimeter leads around to keep things a little more tidy. Super handy print jajaum3d! top notch work. I fixed the two peices with some M3 flathead screws, but you could also just…

Pobrania
340
Polubienia
197
Ocena
5
P
Printablesspuder

Peg Board Multimeter holder

Holds a multimeter to a pegboard. Works with my particular multimeter which is slightly more than 2 inches wide. Can also work with multimeters that are exactly 2 inches wide (by printing two of the same part), or meters that are slightly…

Pobrania
336
Polubienia
99
Ocena
5
P
PrintablesKamil

Multimeter holder

UNIT-T UT61E multimeter holder

Pobrania
334
Polubienia
56
Ocena
4,5

Skadis Multimeter Holder Voltcraft

Multimeter Halter Voltcraft VC130 IKEA Skadis

Pobrania
332
Polubienia
38
Ocena
4,33
P
PrintablesShabubu

Multimeter Pegboard Holder

Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/7fvnORfahl8-kaiweets-multimeter-pegboard-holder Print…

Pobrania
316
Polubienia
47
Ocena
5
P
PrintablesBrad @ FTBT 3D

Curvier Multimeter Holder - HSW

This is a remix of the multimeter holder by TrueShocker. I just made it curvier with less harsh corners to fit the aesthetic of my other HSW holders. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part of…

Pobrania
310
Polubienia
49
Ocena
5
P
Printablesdereki22

Honeycomb Wall Multimeter Holder

This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall It should be large enough to hold most multimeters, I designed it to be a snug fit with the Fluke meter I have.

Pobrania
310
Polubienia
52
Ocena
5
P
PrintablesKrzysztofGW

BSIDE Multimeter (DMM) Probe Tweezers

Thanks to @QED_Maestro for his brilliant idea of simple tweezers for one handed measurements. Now optimised for BSIDE DMMs. Compatibility: A10 S10 S11 S20 not with S30 / S30X In the photo is the RC ;)

Pobrania
303
Polubienia
26
Ocena
5
P
Printablesjonnybergdahl

Multimeter Probe Holder

This is a multimeter probe holder for 4 probes. I have included the Fusion360 design files for easy remixing.

Pobrania
302
Polubienia
39
Ocena
5
P
PrintablesMike Stanbro

Rugger Box for a UNI-T UT-210E Multimeter

This is a remix of the popular parametric Rugger Box design by Whity. I used the author's Fusion 360 CAD file to adjust its size and then added a custom liner that fits the outline of the multimeter. The lid was also modified to provide…

Pobrania
299
Polubienia
95
Ocena
5
P
PrintablesMaschbauboy

Rugged Voltcraft Multimeter Box

I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…

Pobrania
298
Polubienia
33
Ocena
5
P
Printablesaspoon

AstroAI DM6000AR Multimeter Skadis Mount

Just a quick remix to allow herman_v96's multimeter mount to fit an IKEA Skadis board. The universal hook from CSD_Salzburg is also included. Just print the mount and two hooks and you are good to go! Print Settings Printer Brand:…

Pobrania
288
Polubienia
29
Ocena
5
P
Printablesmathewsamuel

HSW - AstroAI AM33D Multimeter

Very minimal supports are needed for the mounting bracket. This is optimized to save space on the wall. It also has storage in the rear. You can store the lead cables there.

Pobrania
266
Polubienia
69
Ocena
5
P
Printablesmakaaberi

Multimeter holder for Ikea Skådis

Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. My multimeter is about 70mm wide and 26mm thick.

Pobrania
266
Polubienia
47
Ocena
5
P
Printablesdavid.h61

Hanna Colorimeter Test Kit Holders

Test kit organizers for Hanna Colorimeters Phosphate, Nitrate and Alkalinity for Saltwater Aquarium Water

Pobrania
262
Polubienia
12
Ocena
5
P
PrintablesMeister Edel

2 Perimeter 0,4 & 0,6 mm Nozzle: Simple & fast Q-Tip & Cotton Pad Holder

The original is much too thick, the remix was too thin and small - so I invested the 5 minutes and quickly constructed my own little holder. Optimised for 0.6 mm nozzles (2 perimetres) but also 0.4 mm nozzles should print this design…

Pobrania
255
Polubienia
42
Ocena
0
P
Printablescreateminds

HSW Multimeter Holder Uni-T

Created this HSW holder for my multimeter. Holds a Uni-T UT61D and similar sized multimeters nicely. Unlike other holders, this one is rotated by 90 degrees to reduce the footprint on the wall. Height with multimeter 18cm, depth in front…

Pobrania
255
Polubienia
30
Ocena
4,67
P
Printableskstuken

HSW Multimeter Holder

A holder to attach my Amazon Commercial Multimeter to my honeycomb storage wall. I have taken idea and design from TrueShocker's model, which unfortunately was too small for my multimeter. This model is a re-design from scratch, though.…

Pobrania
254
Polubienia
45
Ocena
5
P
PrintablesDm+

multimeter probe holder for easy one-handed changing

Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.

Pobrania
253
Polubienia
23
Ocena
0
P
Printablesbodgerator

HSW Multimeter Mount - Side Storage & HSW Pegs

Storage for multimeters of a “Shield” style shape (modelled after a Etekcity Digital Multimeter). Side clips allow loose storage of probes with compartment for loose cabeling. Rear contains x2 Hex Pegs for HSW

Pobrania
253
Polubienia
52
Ocena
5
P
PrintablesKenneth Tan

Aneng 622B Multimeter Desktop Stand.

The perfect stand for the Aneng 622B on your desktop. In the version in photo, the upper Probe clamp is present. In the STL there is also a lower clamp to give the probes more stability. Print this stand on the left side with 20% infill…

Pobrania
250
Polubienia
22
Ocena
4,5
P
Printablesndoktor

Multimeter Probe Cover

I modeled this to replace misplaced covers for my Fluke 115 Multimeter probes using another meter as reference. Printed in Octave black PLA and Polymaker red PLA. Print Settings Printer: Cetus Rafts: Yes Supports: Doesn't Matter…

Pobrania
249
Polubienia
33
Ocena
5
P
PrintablesSudonem

Craftsman Multimeter Pegboard Mount

This is a dead simple pegboard / wall control mounting cradle for my trusty Craftsman 82029 Auto-ranging Multi-meter. This is one of my first designs from years ago and could likely use some refinement - but it's been pretty popular on…

Pobrania
242
Polubienia
53
Ocena
5
P
PrintablesH3dSprint

Box for multimeter with rotary lock

Design goals: store the multimeter with connected measuring cables in a box cover of box shall have a lock multimeter box shall stand stable if cover is opened to perform measurements Design: All designed parts of the box are printed out…

Pobrania
235
Polubienia
64
Ocena
5
P
PrintablesShabubu

Multimeter Multiboard Holder

Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/htkaNsVCoCQ-kaiweets-multimeter-multiboard-holder Print…

Pobrania
235
Polubienia
43
Ocena
5
P
PrintablesPaolo

Multimeter FLUKE 87 III - probe tweezer

Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks

Pobrania
230
Polubienia
30
Ocena
3
P
PrintablesPascal

Aneng AN8008 Multimeter Skadis Holder

Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization

Pobrania
222
Polubienia
30
Ocena
5
P
PrintablesPhobos

Large Multimeter Holder for Honeycomb Storage Wall (HSW)

Just a simple rectangular box with slightly rounded edges (1mm radius). Needs 2 x M3 inserts in the Honeycomb Storage Wall ecosystem. No supports needed.

Pobrania
220
Polubienia
61
Ocena
4,5