Counting matching models…
Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…
3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj
This is a mount that's designed to house an IMX708/Raspberry Pi camera inside a Bambu Labs P1S 3d printer. I measured it all up with the IMX708m but it should also work with the stock RasPi camera module. Once you've got the video set up…
Version 1.0 Intended Design/Use An alternative Arducam IMX519 mounting system for the OpenScan Mini and a back cover that attaches to it. First, let me start by saying that there is nothing wrong with the original mounting system (a…
After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…
Summary I wanted to use the amazing support from https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m to be able simply to use the Raspberry Pi with an Arducam IMX219 camera module camera as…
Thank you to Sneaks for an amazingly designed project. I ordered the wrong camera by mistake and I wanted to make it work instead of returning it. The front cover prints with no supports and no issue whatsoever. I used a brim and supports…
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
The original Creality K1 series camera is widely known for its unreliability and mediocre video quality. This model is a remix of the AngryCam camera mount that allows to install a much better third party camera, either IMX179 or OV5640,…
This model allows an IMX179 USB camera module to be used as a web camera, by mounting it to the top of your monitor. This module has an extremely good image quality for a low price - a comparable factory-made webcam would cost at least 5x…
A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…
Resized the model to work for the Arducam 16MP w/ the Sony IMX519 sensor. You'll still need the original corner mount, from here .
This is case for Waveshare Sony IMX179 8MPx camera which is 38x38mm. For back case use 3mm threaded inserts and use 10-13mm M3 screws. I printed without supports, but inner part is ugly then, so I recommend supports on.
This is a remix front cover for the picam corner cameras for Arducam IMX219. As of this submission, there is a corner cam and a mirror corner cam for the Voron 2.4. The front cover does not fit the Arducam 8MP IMX219 variant so this…
Waveshare camera 8MPx IMX179 cover. Printed in PETG, that camera chip is hot on the backside. Photos are from mine PRUSA MINI… I did this years ago, and do not exactly remember which model/author I take inspiration from (Thingiverse). I…
This is a case for the innomaker IMX708 Camera Module. It measures 38x38mm, center hole with 11x11mm. Back plate with holes for M2 screws, 10mm long, and front plate with holes inside for M2 inserts, 2x3mm (HxW)
Remixed Dana's back cover for the Openscan Mini, to provide some ventilation for the electronics. I printed this in ABS, 0.2 layer height I didn't use supports, some minor sagging on the outer edges, but it turned out OK. Depending on…
Basic mag pouch with belt clip for RimX magazines. Multiple mounting holes for belt clip for some adjustability. I believe I used M4 button head bolts. No need to change orientation and no supports needed.
Source: https://cad.onshape.com/documents/8e32626565cbbeef5e4cd8d3/w/b09365e8f3eeb6319f5a1b46/e/11d4dc9550a5c0cac525a516?renderMode=0&uiState=64aaf63abe953312f726ec55
Lightburn Mount for IMX179 AliExpress Camera It's a camera mount for 2020 Alumunum Profiles. The camera can be mounted on the V-Slot and will require 8 M3x5 screws, no nuts. The print was designed for PETG but it can be also made with any…
Remix of Back and Cover for Raspberry Pi Waveshare Autofocus AF IMX519 16MP Camera. The bolt and ball from original file are best printed in 45o, for more stronger.
A basic mounting setup for developing vision + AI apps for your BeagleY-AI. The BeagleY-AI is a single board computer (similar to Raspberry Pi) but with 4 TOPS of AI performance. This case holds the BeagleY-AI in place with easy access to…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a case for the Waveshare IMX335 5MP USB Camera (B) , which is 2K USB2 camera with a microphone that works well in low light conditions. Low light means low light - it will not work in pitch black. This is a…
assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807 you'll need one m3x25mm bolt and nut (or 20mm without nut) to secure the camera mount and the cover two m5 Tnuts and bolts to…
Kamera Halter für den Voron. Ich habe den Halter Konstruiert um die Kamera IMX335 von Svpro möglichst flexibel am gantry vom Voron 2,4 zu befestigen Am besten druckt ihr es aus ABS und im Winkel von 45° auf dem Druckbett. Ich habe es als…
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover. The used parts contain: - Arduino Pro Micro Type C - FT232RL - Small wires - And the 3d Printed case parts…
I've designed this to use two M2 heat set inserts for the camera PCB and used screws from a laptop screw kit. Two M3 heat set inserts are used like in the original version for the aukey cam. Designed for module WN-L2011.K200L FF, but…
GIMX enables to cross use peripherals with many of gaming platforms. You'll need a dongle like this (atmega32u4) and the computer (Rasberry PI3, PC, ...) with the GIMX SW. More info: gimx.fr Category: Games
simple enclosure for a DIY GIMX adapter for using my logitech steering wheel with my PS4. instructions: https://gimx.fr/wiki/index.php?title=DIY\_USB\_adapter fits very nice! If it doesn't stick together (because it is very tiny), simply…
Enclosure for GIMX USB Device. This device allows you to use mouse/keyboard/racing wheel/flight sticks with your Xbox 360/One and Playstation 3/4. http://blog.gimx.fr/ The parts included are: CP2102 USB 2.0 to UART TTL 6PIN Module Serial…
I wish to add camera for my Atomstack laser to use it with LightBurn software. But I wish to remove camera when it is not needed. I used SONY DSJ-3079-HE also sold like 8MB IMX179 from here: https://s.click.aliexpress.com/e/_oENAtbv…
This camera enclosure is for a Sony IMX214 camera sensor board with a USB connector. I purchased the camera from a retail store that deals in Amazon returns and merchandiser liquidations. This can be purchased from ELPCCTV here - though…
I This is for the following product https://www.aliexpress.com/item/1005004407649001.html?spm=a2g0o.order_list.0.0.8ec01802ioh7Xm Mounts to any 20x20 extrusion via the modular case parts. The case is held together via 4 M2 self tapping…
No extra tips here. This is a remix of a remix. Follow the rabbit back a few makes for better info from better makers. Last photo is the original remix by huberjer.
This is a support to mount the 15x30mm motherboard of the IMX258 camera module on the extruder of the Prusa MK3S+. Please note that there are many dimensions of the IMX258 motherboard on the market. This support is only compatible with…
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
Helps secure the 4 cables from the G-Belt so they do not fatigue with a chassis motion system. Uses two M8x16 bolts and M8 T-nuts to bolt to 40 series profile. Uses two zip ties to secure the G-Belt Cables in place
Remix of existing kayoumini canopy to accommodate cameras of a similar size with a 10mm lens like that which comes with the Emax Wyvern 100mw OpenIPC air unit.
GIMX enclosure for Atmega32u4 and CP2102 (6pin w/ DTR/CTS) FTDI adapter. the cover is a snug fit, could be glued if desired. Print Settings Printer: geeetech i3 Rafts: Doesn't Matter Supports: No Resolution: 0.4 Infill: 20-30 Category: DIY
I know, I'm late to the party but a friend got me a fabrikator mini from his basement - new. Now I'm stuck between the world of newer cameras and old mouns - this is my first design of a cam holder as the current ones do not fit my picam…
Print with ABS/ASA for in chamber corner mount of webcam (34mm on center holes but 38.5mm width clearance and 45' angle down tilt. Prints without supports if printed on back.
IMX 290 ASTROIMAGING CUSTOM PASSIVE COOLED CAMERA BODY has a slit style intake for passive cooling.
This is a support to mount the IMX258 10x85mm webcam to the Original Prusa Enclosure (OPE). Please note that there are other sizes of this camera on the market, but this model is only compatible with 10x85mm ones. For example, I suggest…
Designed to fit a Pelican 1120 carry case to organize: Two Dexcom G7 sensors Two Cartridges, syringes, and infusion sets One vial of insulin To use, remove all of the foam with the exception of the thin bottom foam insert. This foam will…
I didn't like not being able to tighten my 20mm m2 bolts to lock in a specific position for my camera. A couple of small notches allowed me to fix that by giving enough room for a nut. Category: 3D Printer Accessories
This is a very simple case for the GIMX adapter. I used a USB-C Arduino Micro (the version with the headers on the bottom) and the USB-A CP2104 module. I’ll include pictures of all the components I used. The fit inside the case is very…
My first 'production' scan using : OpenScan Classic Arducam IMX519 Focus Stacking OpenScan3 beta Meshroom Photgrammetry Turntable flow FeatureExtraction: sift, dspsift, akaze Describer Density+Quality = ultra Meshing: Max Input Points +…
No extra tips here. This is a remix of a remix. Follow the rabbit back a few makes for better info from better makers. Last photo is the original remix by huberjer.
This is a very simple case for the GIMX adapter. I used a USB-C Arduino Micro (the version with the headers on the bottom) and the USB-A CP2104 module. I’ll include pictures of all the components I used. The fit inside the case is very…
A bracket to hold the IMX291 camera module that takes the place of (and reuses the same screws) as the IR LED board that comes in the below enclosure. Holds the end of the 6mm lens about 1mm off the front glass. Utilizes some M2 threaded…
Nice camera enclosure to use outdoors, the seal should keep water out and allow you secure many similar camera designs.
The Waveshare IMX179 8MP USB Camera (B) module is prone to significant overheating, which becomes even more critical inside an enclosed printer chamber. To prevent thermal throttling or damage, I implemented this simple cooling upgrade. I…
You can use it to mount IMX179 8MP USB Camera (B) module to a board and adjust it horizontally. It is especially useful for mounting a camera for your printer when the printer is enclosed in a wardrobe. In order to maximize devices…
This is a 5 round magazine for a RimX rifle in 22LR caliber. It includes the body, base plate and follower. You'll need 4ea M3 flat head screws for the baseplate and a spring for the follower. I've had good luck printing these using…
The camera is very compact and is sold without a case. To be used in a 3D printer a protective case and mounting system are required. I designed a case where the camera stick is attached with two 4mm M2 screws using hot inserts. The stick…
This model is a remix (thank you to https://grabcad.com/lehaiver-1) . I adapted it to suit the 8 MP camera purchased on Aliexpress ( https://a.aliexpress.com/_EI7BHP3 ) of 38x38mm. The legs of this bracket are assembled with screws and…
I bought a non-autofocus USB Arducam (1) for the use with OctoPrint and the 'Articulating Raspberry Pi Camera Mount' (2). My camera has the back mounted usb cable and the lens was slightly lower than other designs I found online (3). So I…
I had removed Raspberry Pi v3 camera autofocus mechanism https://forums.raspberrypi.com/viewtopic.php?p=2099545#p2099532 and need to superglue CStoC metallic adapter ring (with free space for connector dremeled away) onto v3 camera PCB so…
Camera mount for SONY IMX179 USB 8MP with 2.1mm lens http://s.click.aliexpress.com/e/6HCBgNw (32mmx32mm) Print file "cameraplaat.stl" twice, one for in the camera and the other to mount on the wanted surface. You can connect the plates…
Modified versions of the front and back covers of chri.kai.in's Angry CAM USB v2 for use with the IMX179 USB8MP05AF camera module.
