Counting matching models…
Introducing the 'Individual Scale' model, perfect for cosplay enthusiasts and DIY crafters. This triangular, textured piece boasts a precise, patterned design ideal for creating lifelike armor or accessories. Elevate your creative…
A new 3D figurine generated by AI, The Three Wise Monkeys. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
Hedron Stack pieces separated to individual STLs so you can reprint single pieces.
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
I lost the pick that came with my hearing protection PPE for cleaning. Here is one in case you've lost yours or need a replacement. It's used to clean the crevices of the individual hearing protection from all the gunk that accumulates…
Sakura blossom polymer clay cutters. Files are pre-oriented and work with a 0.4mm or 0.2mm nozzle. Includes: Large flower outline Large petal outline Medium flower outline Medium petal outline Small flower outline Small petal outline
Print 2 of either the flat or round pins, and then print each individual model (left, right, and logo). The pins are to align the two bases and the logo goes into the center of the two halves to hold everything together, but aren't…
EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom. A User suggested simply CUTTING OFF the nubs, which also seems to work well. This works really well! EDIT 7/17/2024: From AJAX: Made the…
Exact same version of the Remixed source, but in 3mf file format. Parts are Pre Broken down.
Print at 0.2mm layer height. Insert a color change after 2 layers. This 3MF is designed for a MK4S and MMU3, and will print in 50 minutes on one.
ARSAT-1 by INVAP model remix, I've made indiviudual parts to use less plastic.
This is just a 0.6mm version made in TinkerCAD, because I was not able to edit Solidworks file.
A tool holder in tree design. A practical solution for tool storage. 30 mm main post can be printed or bought in home improvement store as a steel furniture leg. Furniture legs are available also in different lengths which is really…
Schachtel mit Deckel für einzeln verpackte Kleinbildfilme. Die Schachtel ist in 4 verschiedenen Größen erstellt. Für 4 Filme, für 6 Filme, für 8 Filme und für 10 Filme. Gedruckt mit PLA ohne besondere Einstellungen. ……………………… Box with lid…
Add a second, elevated row to your Funko Pop! display shelf with these individual figure stands/risers. Comes in 11cm (pictured above, standard height) and 15cm (large height) variants. Printing Print upside-down - no supports required!…
Couldn't find the proper 3mf model I wanted, so had to make 1 of my own. Proper individual bodies and labeled. Colored bodies are .6mm thick for proper color, then rest is black. Printed with .2 nozzle for detail is recommended. .4 should…
Grinch earrings. Proper individual bodies and labels. .2 nozzle HIGHLY recommended for detail. Colored bodies are .6mm. Total depth of 2mm. About 35mm tall.
Colored pencil holder, printed in vase mode. A base with 16 slots for colored pencils, approx. 8mm in diameter, which can be attached to other bases on the sides via a small link. A similar collar holds the pencils upright and can also be…
Aufgrund dessen, dass mir die vorhandenen Bowling-Pokale nicht im Detail gefallen haben, habe ich beschlossen für den Geburtstag unserer Zwillinge eigene Pokale für die teilnehmenden Kinder zu erstellen. Der Pokal ist mehrteilig…
Split the original files into individual .obj files for each part. Also split the guard down the middle for easier printing.
I wanted a clip to store my cycling gloves near my helmet, but didn't like how one would be pinned against the wall by the other with current clips. I designed a new clip that grabs the edge opposite the thumb of each glove individually…
There are two Models here A blind clip that allows routing of cables inside of the Extrusion A Clip that holds a single RGB LED Both clips grip pretty tightly into the extrusion and won't move laterally easily. Can be printed without…
Individual Magnetic Marker Dots You need to add a pause at layer 15 (for a 0.2 mm layer height ) to insert a 8×2 mm magnet into the marker. Once the print is finished, there is space to attach a self-adhesive marker on top. This makes it…
I didn't like that that the Headamame files were not STLs and were not individual files. So I divided the .3mf into each individual part to make it easy for you. These are for Closed Back. Print however you want.
This is the Elegoo logo but into different files so you can space them and size them to whatever you like.
July 9 2025 edit - added dome for Hoocho's netcups, same print settings These are small, easy to print humidity domes that fit on single cells in Hoocho's seedling propagation system I often mix different plants in the same tray when I'm…
The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…
I needed something to hold my Presch Chisels on my newly created Honeycomb Storage Wall . The hole/holder part is tapered like the neck and the chisels sit really comfortably. You can see the spacing I used in one of the pictures and even…
Introducing the 'Individual Scale' model, perfect for cosplay enthusiasts and DIY crafters. This triangular, textured piece boasts a precise, patterned design ideal for creating lifelike armor or accessories. Elevate your creative…
F1 2022 circuits. Designed to be placed in order with F1 logo and year in top corners. Files are separated into individual cities to allow for customization. The blank board file is what I used to put the circuits on. Check out my profile…
Individual Letters to create your own sweeping name/text plate using individual STL files that you can use in Blender, TinkerCAD or other 3D software that works with STL files. You can also print them as is after converting to gCode in…
This holder holds 1 toothbrush which can be mounted using a 2cm suction cup. An alternative to the suction cup is a 3mm double sided tape. This design took only 17 mins to print 1 and 40 mins to print 5 (don't ask me how, it was on the…
PLA, 0.2mm layer height, 15% infill. Uses (6) 20x6x2 magnets
Separate grips for Joycon 2's that let you play ergonomically and still spread your hands! And yes, they are also dockable and can be used in handheld mode. They can also be used as a sort of kickstand given the sturdiness, if using…
A sleek, minimalist mount designed to support a single LED light bar like the Barrina T5 60–120 cm . It’s made to hang from two lateral points , offering more stability than central-hanging systems — ideal for grow racks, under-shelf…
This is an optimized hair catcher and sieve designed for the Vigour Individual 3.0 shower drain that replaces Vigour part V3DRHS or V4HSIEB. The stock hair catcher sieve did not succeed in catching all the hairs of my wife and my two…
Das Modell kann mit beliebigem Namen oder anderen Text versehen werden. Wie man den Text ändert, ist auf einem Bild ersichtlich. Danach muss in der Regel der Text neu eingefärbt werden. Bitte das Modell nach dem Druck ausreichend abkühlen…
Although I have since found similar on prusaprints my remix came from https://www.thingiverse.com/thing:2918462/files. Again looking for individual holders for my various and individually purchased screwdrivers to mount in a small area.…
These player trays can be used to store the wooden player tokens and player card from the base game (and 5-6 player expansion). The pieces rest in slots at different heights so that the player board can function as a lid. An outer slip…
I had problems printing the original file. I had to do some editing and resizing. This is a 3mf of all the parts.
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
This is an individual tray for cards that can be used in board games like as Settlers of Catan (Devir version) or Hare & Tortoise. Esta es una bandeja individual para cartas que pueden usarse en juegos de mesa como Colonos de Catán o La…
I lowered the front tabs to be just tall enough to still hold the pop in place while also allowing full view of the box graphics. Redesigned the hanging holes and filled in back so the nail doesn't go through. Resized it to fit pops…
I wanted to be able to hang my quick release nozzles on the wall so they have a fixed spot. Theres a hole in the bottom to fit a 4mm screw. The margins are very tight for the locking part and as some quick release nozzles have slightly…
Generated a simple power strip holder using https://makerworld.com/en/models/783010-underware-2-0-infinite-cable-management#profileId-1504508 and then modified the top to fit my power strip. The power strip is a generic one sold under…
You know that i know that you know what it is, so take it and leave. Now.
A new 3D figurine generated by AI, The Three Wise Monkeys. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
the original only had the right side as a seperate piece meaning you cant print in different colors, i fixed this
The Filamentalist_v3 connects to its base using a "clip-on" design, similar to the method used by Emu , and only requires two M3x8 screws to be installed in the back. The original enclosure (or box) used six toggles, which I felt were too…
I made this since im ok with the space the mmu3 occupies, but im not ok with how exposed the spool are when in use. This dry box is meant to be used with the pair of spool rollers that came with the MMU3. Just print and assemble the lid…
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
this is a file set of the OUT OF DARTS L.R. Fold every part is its own STL file allowing compatibility with all 3D slicers. And easy customization.
Hedron Stack pieces separated to individual STLs so you can reprint single pieces.
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
I lost the pick that came with my hearing protection PPE for cleaning. Here is one in case you've lost yours or need a replacement. It's used to clean the crevices of the individual hearing protection from all the gunk that accumulates…
Sakura blossom polymer clay cutters. Files are pre-oriented and work with a 0.4mm or 0.2mm nozzle. Includes: Large flower outline Large petal outline Medium flower outline Medium petal outline Small flower outline Small petal outline
This is 100% the tank from WindhamGraves, I just individualized the parts for those of you that have (like me) issues with printing multiple parts at once but lack the skill to cut the file yourself. Enjoy :D Print Settings Rafts: No…
To find out where we are in our Yahtzee game. Print in 2 layers colors. Stick the 2 side of signs. Clips signs to the board.
I split the file to fit most printers at 100% scale. Blade pieces go Base> 2 > 1> Tip. Enjoy! Category: 3D Printing
A simple yet elegant trophy that allows you to add custom text in your slicer. Print the stand separately, then print the desired trophy. During printing, you will need to change the filament color twice. Once finished, press the trophy…
This is a modular magnetic dartboard number ring with individually printed and replaceable numbers. Each number is printed separately in two colors and attached to the side of the dartboard using a rectangular magnet. The design allows…
PC case leg extensions designed for the Corsair 7000D case. These leg extensions lift the case 19mm or roughly 3/4in off of the floor to allow your PSU to breathe more easily. Four total are needed to fit each leg on the case. This also…
Individual screwdriver holder for Gladiator system This will print just fine and be functional in PLA and .2mm quality This is a remix, but can't remember where I got it. If you know please remind me, so that I can give credit.
These are individual holders for the Gladiator system. Print in PLA with .2mm This is a remix, but can't remember where I got it. If you know please remind me, so that I can give credit. Adding additional pictures. Some of these show…
This is an individual hook for the gladiator system. Printed in PLA with .2mm accuracy. This is a remix, but can't remember where I got it. If you know please remind me, so that I can give credit.
Remix of Impishone spray bottle holder. I made modifications to mount it horizontally and added screw holes. Perfect for mounting detailing bottles in the garage. Edit: I have successfully printed without supports. This is some stringing…
the original was all 4 parts in 1 STL. i broke them apart into the individual pieces Category: 3D Printing
individual box to place the tl smoother near the stepper motor The box is fixed on its support, from the inside or the outside (2x diam 5mm ) published on thingiverse : https://www.thingiverse.com/thing:3399073
Clearly, I did not yet have my printer fine-tuned. In my first attempt at printing K2Van's challenge piece - a little under 4 hours to print, every nut was frozen solid. While informative, I decided that I could have learned as much from…
I needed a Soapholder for my Bathroom and had some Tisken Vacuum Holders from IKEA laying around ( https://www.ikea.com/de/de/p/tisken-haken-mit-saugnapf-weiss-70381275/ ). I know that you can buy a Soapholder from IKEA directly, but why…
MA5C Individual Combat Weapon System Print Settings Printer: Creality CR6-SE Rafts: No Supports: Yes Resolution: 0.2 Infill: 10 Filament: Sunlu PLA White Notes: I modified these file so that there are less pieces to print because I found…
Just something to group the individual player cards and troops together. Can be slotted into the original plastic insert that came with the box. Made for sleeved cards Category: Games
I have created this kit for bending 16x1.5 mm steel tubes building a frame for saddle bags for my motorbike. You will find the possibility to bend 8mm, 10mm, 12mm, 16mm tubes with different radius and I have also added the FreeCad files…
These pieces are designed to be used with my individual-spool drybox inserts. The outer fitment is a panel mounted push-fit holder for 6mm outer diameter tubing, and the inside fitment is a funnel guide for filament being pulled from…
Another awesome model created over at the 3D warehouse https://3dwarehouse.sketchup.com/model.html?id=723f13f70b2132413c5a70503dac4f1d Cheers Jace
Need to move your spool of filament into a dry-box while still using the Universal Auto-Rewind Spool Holder? This set of files will let you do so. This set of modifications and new custom parts moves VincentGroenhuis' rewinder into a…
Found this cool model over at the 3D Warehouse https://3dwarehouse.sketchup.com/model.html?id=84010cab36f931b22c6c56ff3482e215 And thought it would make an awesome 3D print. Please post some pics if you do print this model, Cheers Jace
Hi, my visually impaired cousin broke his king chess piece, so I decided to make him a new one. I printed this at 0.12mm layer height, 100 percent infill, supports and adhesion enabled.
Soporte IR individual para bq PrintBot Evolution Print instructions Category: Robotics Print Settings Printer: Witbox 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20
Bonjour, vous trouverez les 22 pièces du robot BD-1 en 22 fichiers séparés pour une impression en plus grand ou pour juste imprimer une pièce à la fois modèle original Star Wars BD-1 Droid Kit Card Hello, you will find the 22 parts of the…
Individual Drawer Latch (IDL) for Harbor Freight US General Tool Rollers. The latches mount on the right side of the drawers. To mount on the left side, you will have to mirror the housing and the drill jigs. I think I saw a similar…
BD-1 parts kit from fixumdude separated into individual parts files for convenience. Image from https://starwars.fandom.com/wiki/BD-1
Open-Filament is an collection of filament producers, materials and product lines. It’s main purpose is to give you an easy solution to label you test print’s and filament spools with a QR-Code or the link to an quick overview over your…
With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…
Screwdriver holders that actually work! I have a few multi-screwdrivers and have never found the single hole or multi-hole screwdriver holders very good. I also have a French-cleat wall system and want to be able to move sections around…
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers: https://www.rockler.com/igaging-3-piece-engineers-square-set Should you have a different set, an…
Not even exactly a remix, it's just the dismantled links and connectors, so that you can manually put together your own shapes, don't limit yourself to a square! “HexMaille 6 piece” - 6 links to the main hexagon “HexMaille 0 piece” - no…
I cut every part of original model so you I could print individual colors without needing color changes. Minimum support needed. Only emitter_2_silver needs support. Feel free to print in any color. I also remade pommel to have cutout and…
The RepRack Table Top Spool Holder is great, but the two pieces of the model are joined. I wanted to print the pieces on my Prusa Mini+. The objects have been separated so that you can print them on at a time on the smaller build plate of…
Jumpstart pack with a sliding cover as the original was not good enough due to clearance.
This is a remix of the original base for Dycus' Ocarina of Time Spiritual Stones. The base was cut into individual pieces for each stone and the total area reduced to use less filament as well as fit in smaller spaces. The prints from the…
I am very happy with an app "HotKeyBind" which allows me to individually program function keys with my favourite actions. Here some examples: Shift+F1 adds a date to a filename. I store “2023-02-12 (1) ” in key F1, so a file is renamed to…
It has been bothering me that the SpaceX Dragon module connects to the LEGO International Space Station 21321 the wrong way around. This simple adapter makes it possible to dock it correctly. It also enabled the Space Shuttle to dock,…
The original file had a few dominos that were duplicates so this one has all the correct files and they are individual so that you can print them however you want, at whatever scale you want. Dominos in photo were printed in white and…
