126 models
I wanted an easy way to keep track of initiative in my role playing game sessions while allowing the players to see when they were about to come up in combat. My solution was to design a widget that accepts a 1 inch wide cardstock tag and…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
My son is making a screen using foam-core which is 5mm thick. I remixed these with a 6mm clip and chamfers on the inside edges to make putting them on easy. 6mm so that they slide back and forth easily. When remixing the STL files, I also…
Initiative tracker for the top of a DM screen that has a slot on either side. You can have a picture of the character, NPC, or monster on the side facing the players and useful stats or notes on the DM's side. These are 52 mm wide and 73…
# Printable TBS Source One V5 ## donate if you like…
A modular initiative tracker designed for ultimate flexibility during tabletop play. This system allows you to display portraits or names for each character or creature in initiative order—on the table or on your DM screen. Each base…
Basic initiative trackers in d20-style for dnd or other rpgs. Category: Toys & Games
No more messy notes! Simply glue a piece of paper on each arrow, write a name on it and rearrange as you go. Be the first to know when Dungeon Master's Inventory launches on Kickstarter so you can grab the early bird rewards! How to print…
I was looking for an alternative to our paper namecards that hang over our GM Screen for initiative purposes. I made them to look like a kind of banner. After a testprint I added a pole on top to make it possible to track if the…
This model contains the three initiative tokens needed to play Star Wars Unlimited. The first player token is the only token needed for 1 vs 1. The multiplayer “ Twin Suns ” game mode needs the “Plan Counter” and “Blast Counter”. These…
This requires some additional materials in order to construct, however I've been considering modeling something similar that requires no additional materials. That said, here's my construction approach. I used 3m magnetic tape , cut to…
These simple initiative markers are designed to make tracking combat fast, clear, and hassle-free. Each token sits directly on your DM screen using one of two slits underneath. They're lightweight, fast to set up, and require no clips or…
This is a bookmark I made of the Lodestar Initiative from the book series, Keeper of the Lost Cities. I've made two variants, one without the backplate. This one while looking batter, is harder to clean up. and one with the backplate.…
Nice looking customisable initiative trackers for tabletop RPG games such as D&D or Pathfinder. Build instructions You will need 2 things to prepare your ribbon trackers Prusa Slicer 2.6 Printer that can change filament mid print (This…
This Initiative Tracker for Frosthaven, Gloomhaven and any other x-Haven game lets you put your initiative tokens on a magnetic surface. You can also add a light source inside of the tracker, which will shine through the side-plates. To…
I included generic nameplates and blank ones so you can make your own. We created a nameplates for each player and then are slowly bulding a set with the monster we face as we meet them in our current campaign. Be aware that you need to…
UPDATE: Finally printed and finished the model. This is Blast Machine 10 Cap. initiator used by US Army Engineers from the 30s thru the 50s. This is a gift to another team member whose done an amazing job. Print everything as it is…
Star Wars Unlimited compatible Initiative Token - part of a big Tokens Set. Enjoy this promo part of a big Tokens Set. Tokens are high-quality and double-sided. Print them with your resin printer at home, to bring your gameplay experience…
I remixed this to be support free and to cover less space on the GM screen. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: No Supports: No Resolution: 200 Infill: 10 Filament: Ultimaker PLA Category: Toys & Games
Print in PETG with TREE supports for results better than your outcome playing against this player. Hes so kikimama.
Uses 3x3 mm magnets press fit into the holes. Print without any supports.
A more substantial Initiative Token for the board game Arcs. Makes seizing the initiative much more satisfying. Printed on Mrk 3.9. Requires supports. I used organic supports. Increased wall thickness to 3 min and the base to 7 layers,…
I use these coins in my D&D game to keep track of initiative order at the table. We all roll initiative and then take coins to place in front of us in initiative order. First up takes the '1', second the '2', and so on. The DM usually…
No more messy notes! Simply glue a piece of paper on each arrow, write a name on it and rearrange as you go. Download PDF template for arrows This is not a physical item. You will receive a digital 3D model in STL format for 3D printing.…
Banners with letters and numbers, so the less technically savvy people can easily print and use them. Banners with letters and numbers, so the less technically savvy people can easily print and use them. Not all letters available yet. I…
These are 3d Printable Gloomhaven board game initiative tracker bars. Like Jaws of the Lion these are little bars with the baddies and heros names on them to help keep track of who goes next. I am not affiliated with the companies that…
I really like the initiative trackers on my Wyrmwood DM screen, but the need to write down names on both sides of the tile before you set them up does cost a little bit of time and the tiles themselves cost a bit of money. So I decided to…
Ein Ring sie zu knechten… Moment mal, falsches Universum :) Hallo zusammen, da wir in unserer DnD Runde immer öfter das Problem hatten, die Initiative zu tracken, vor allem mit vielen Monstern, habe ich diese Ringe erstellt. Sie sind…
PRINT WITH PETG and TREE SUPPORTS so that the devs release this skin :sob:
See original design. Made this a two sided variant so the DM can also see what the marker means.
larger plate printable in one K1C plate
Print 2 at a time. Click 2 together. Use glue if needed. I used superglue. Insert something unique into the tracker so that you can keep your combatants straight. There is room for a 30mm X 30mm piece of paper or picture. Can be folded…
Inspired by the awesome model by Joel Crane (PotatoFi) and the default BlueSCSI bracket, this allows you to mount your BlueSCSI v2 “Initiator” unit to the rear expansion port of your SE or SE/30. Just supply two M3 screws and you're done.
Initiative token/marker for Warcrow. Have fun playing and happy printing. if you want to support me and buy me a coffee → https://ko-fi.com/khain Print settings: 0.2 mm layer hight printed with PLA and 0.4 mm nozzle infill 15% If you have…
Model is made to fit the top bevel of a Wyrmwood GM Screen. Print at .3 layer height with piece flat against the bed. Edit: You can fit 4 onto each panel. Working on making it 5, will upload file when I get it right.
This is my first attempt to design a screen for myself. After several gaming sessions, I came up with some ideas on how to redo it, so I'm currently working on a second version that will significantly differ from this one. Version 2:
This is an initiative order tracker for an already great model from Endorriar. https://www.printables.com/model/153782-dnd-dice-box-tracker A remix with the D&D logo was made by Brandon Barrera and can be found here:…
Initiative tracers for the Fates Ends DM Screens. This has all 5e base classes and a few extras tossed in. If you want to sell these with your Fates End Screens please add the attribution This is a remix from another initiative tracer set…
This is my Initiative Hamer. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. This is an original model made entirely by me. Pointers can be secured to the…
These are super fast to print and can be printed in multiple colors with a pause at layer height command (if printing at 0.2, layer 10) These rings are large enough to fit around the bases of minis with a 25mm base I modeled 30 of them so…
The bottom piece has a longer ramp with a dent, so I can have 1 piece stuck in the raised position at a time. For the swatches, I usually use PrusaSlicer to add a number, character or symbol of my choosing on a blank swatch, according to…
DM/GM Screen Top Initiative Tracker & Condition Markers. Are you looking for a simple way to track initiative and show what conditions are on which monster/player without resorting to minis & condition rings? I travel to DM and want to…
these basses are meant to number you NPCs 1-10 for the purpose of tracking initiative and effects Category: Models
A bookmark/hook designed to fit over a DM Screen and assist in tracking initiative and status effects. The face of the tracker has an open spot to place nametags/labels for players and enemies as well as a blank space underneath for minor…
Main Info I had some trouble, sometimes , to print https://www.thingiverse.com/thelukec 's trackers. One issue I had was that there were not always the same amount of layers on both sides of the slit. So I remade the base from scratch in…
Version 1: Die with 2, 3, 4, 5, 6 and 6 (no "1"). Version 2: Skeleton Hands (Multi Material) Version 3: Monsters (Multi Material) Visit my website: https://StarLabs3D.com My YouTube: https://www.youtube.com/@StarLabs3D
Older edition (and Polish) have smaller initiative tokens. I made an adapter to use them as lids.
The original model was single sided, so the trackers could either face the players or the DM. My DM asked for double sided ones, so we could both see what the initiative was.
My D&D Sessions needed some generic tokens for our battlemaps and all of the existing tokens didn't really appeal to me. So i made some myself. Tokens are included from 1 to 25, with and without direction indicator. You can also use the…
Magnetic Initiative tracker for use with the sliders from my monster card boxes , all the creature trackers can be found there. You need to add a pause in the print to add the magnets in the holes of the Stand. 3x3 mm magnets in the stand…
Roll initiative! Then use these enemy trackers to mark the enemy turn order for up to 5 groups of enemies. They'll slide perfectly on the top of any standard Dungeon Master Screen. These trackers also can double as table minis! Check out…
A tower I made for myself (and my dm) cause i liked this idea I had. The bottom of the tower is who's turn it is, so load the tower in the correct order, just pull the players flag out when their finished their turn, and place it back on…
An alternative war chest initiative marker. Glue the 2 parts together after printing. See also: Alternative War chest Control marker . Alternative War chest Unit coin . Alternative War chest Fortification coin .
My husband and I started playing the Gloomhaven series from Jaws of the Lion and when we got to Gloomhaven proper, we discovered quickly that we missed the name tokens that JotL provided. There are other models here for marking…
Initiative Tower – A Visual Turn Tracker for Dungeons & Dragons and Other TTRPGs Streamline your combat encounters with this stylish and practical Initiative Tower! Designed for Dungeon Masters who want to keep the action moving and the…
The model comes in multiple modular parts. It is meant for you to write the names of your players and monsters down and them to the initiative tracker during combat. The parts in this include, the main post, signs, a lantern topper, a…
I was looking for Pathfinder 2E related models, and came across a nice initiative and condition tracker by Nazghul on Thingiverse. I decided I was going to use it for my upcoming PF2E campaign so I edited the condition markers to make…
Quick and dirty mount to allow you front panel access to your SD Card for the BlueSCSI v2 “Initiator” on the Macintosh SE. Use one of the main brackets (with or without “Authentic LED Hole”) to mount the BlueSCSI, then use the required…
Don't underestimate the Initiates just because they're small. They're fast, and they're the real hands of the Coven. They're not there to kill you; they're there to hold you in place. You'll be fending off a Harvester, and suddenly one of…
I really liked the look of the initiative trackers by Cotanaj ( https://www.thingiverse.com/thing:4597082 ) and created a similar v version from scratch that I thought would be slightly easier to print and doesn't use magnets. I intended…
I really liked the https://www.printables.com/model/358736-pen-paper-initiative-tracker-easy-to-print initiative tracker, but wanted to add some to the player plate. I found the icons from…
I wanted a neat token to keep track of the initiative order. You can print as a single color or change part way through for better contrast.
This build consists of 4 parts: Rails without locks - fits to the top of the standard game masters shield. They will not maintain position relative to their neighbors. Rails with locks - fits to the top of the standard game masters…
Organize your session notes and encounter cards in style with this 3D-printable DM screen card holder! Designed to clip onto most standard DM screens, this holder lets you keep initiative cards, NPC stats, spell reminders, or other…
This Combat Initiation Jason/Slasher skin from Forsaken action figure is probably one of my favorite Jason/Slasher skins. (The others being Mystic, White Pumpkin, Vanity, Pursuer, and Retro.) (For the ones that want the chainsaw on the…
Fed up with dry-erase markers on acrylic tombstones? Me too! So, I modelled a replacement tombstone in fusion360, chamfered the edges and was about to call it a day when I thought… what if I was just a little bit extra and made the whole…
This is a remix of the GM screen initiative tracker but with an added hook to hang condition rings. Great to help keep track of multiple conditions such as fear, sickened, wounded, etc. The slim version hugs my screen a little tighter…
Added a blank variation of the token to allow for custom font and more than 12 tokens
Now you can take your tracker on the go! Just write your players names on the flags, i used tape so its not permanent. Then place the flags onto the tower in order, so the first up is on the bottom. Wait for the monk to make 12 attacks……
The Initiative tags are meant to lay on top of a DM screen or other similar surface. They have a gap of 2 mm. You can place them in order from left to right to represent the initiative order. When slicing, I would recommend creating print…
Based on the Frosthaven initative tracker from Thingiverse by jojobao. I made my own version. Economical print with 6 slots (half of the original and slimmer); this way you only need one with tracker e.g. 4 monster types and 2 players;…
CHOOSE YOUR WEAPON & ROLL FOR INITIATIVE, SIGN Category: Games
I created these to work perfectly with the popular DM screen-top initiative trackers by thelukec on thingiverse. Print these bases and attach one of the initiative trackers to it to use as a miniature in your tabletop game! Slides on…
Deck box for the initiative cards in Mice and Mystics. Designed to hold all 19 initiative cards sleeved in Ryker sleeves . Interior Dimensions : 47.2mm (W) x 16mm (D) x 73.4mm (H) Extras: 4x D3H1 Magnets from K&J Magnetics
Hello, this is my design of a Initiative Stand with Numbers for Mini with a diameter of Ø28mm. Enjoy.
I made these Star ship initiative tracking hex token numbered 1-10 to track NPC or allied ships , missile token and arc of fire markers miniatures suitable for starfinder Category: Models
A perfect initiative deck for all your RPG games, especially for games like Dragonbane, which changes every round. Slide System This system can be used with or without magnets. You can customize the tag names in the F3d file. Place/Slide…
Join the Initiative now and download this keychain!
CHOOSE YOUR WEAPON & ROLL FOR INITIATIVE, SIGN Category: Games
Single piece print will likely need supports for the bottom lip
HueFoge Dharma Initiative Picture (2 color version) (Dharma Initiative is from the Lost series) You can resize the model, keep X und Y in the same relation, BUT KEEP Z AS IT IS! Print at 100% infill with a layer height of 0.08mm with a…
I needed a simple initiative tracker for my dnd players, so I designed this. It prints relatively quickly (about 2 hours) and its nice and visible for the players and the DM.
Wall Mount for the Starwars Unlimited Initiative tokens. More specifically made for the unique pre-release tokens. Holds 6 per mount. If the pins dont fit, use a file to file them down until they do. Maybe ad some glue. Use settings with…
Simple, printable, and generic initiative trackers that you can hang on the side of your DM screen so players can keep track of the turn order. Just clone the clamp as many times as needed and glue them onto the banner. If you don't have…
Tokens to assist with initiative tracking for the Genesys role-playing game. Category: Toy & Game Accessories
When looking to print Endorriar's DnD Dice Box - Tracker, I looked at the remixes and liked both slapjack's and Norvilledingus' remixes. As a forever DM I decided to create a remix of slapjack's tracker to incorporate Norvilledingus' GM…
This initiative tracker fits perfectly along the top of a standard sized dm screen. pdfs have been provided from the original creator that can be printed and filled out to slide into the initiative tracker. There are caps for each of the…
Deck box for the initiative cards in Mice and Mystics' expansion Heart of Glorm. Designed to hold all 13 initiative cards sleeved in Ryker sleeves . Interior Dimensions : 47.2mm (W) x 16mm (D) x 73.4mm (H) Extras: 4x D3H1 Magnets from K&J…
Before printing / Customization Adjust the nozzle size in the variables of the file to fit yours, this will only change the width of the bottom wall. All the STLs have been generated with a 0.6mm nozzle in mind. Other variables are…
Deck box for the initiative cards in Mice and Mystics' expansion Downwood Tales. Designed to hold all 25 initiative cards sleeved in Ryker sleeves . Interior Dimensions : 47.2mm (W) x 20.8mm (D) x 73.4mm (H) Extras: 4x D3H1 Magnets from…
Should slide on top of ~3mm screen. Added Freecad file for mods. not parametrized (yet) Prints shown in pics - scaled in slicer. Gathering ideas for v2.0 ;)
Laser cut rail for initiative tracking. I made this to have a place to use initiative trackers atop my wife's fancy wooden DM screen. The screen is much thicker than commercial cardboard DM screens, but it has metal sheets on the DM side…
Overview For when your book is great… but your party still insists you roll for initiative . This Hueforge-style bookmark features a chunky D20 and bold “ROLL FOR INITIATIVE” text with a stone/cracked texture look — perfect for RPG…
Generated with the help of the Bambu relief map maker. It's just a token to track initiative in your games. If you'd like these released with each character either drop a like, download or comment and I can start experimenting from there.
it is a initiative tracker to see the order of turns. each card needs to have a paper inside it, as a name, ac, initiative, speed, health, and more. so on the top of the card is a hole, which u can put a turn tracker to. and on the bottom…
45° Wallmount for the Growmau5 Far Red Initiator Puck, probably best printed in PETG/ABS or similar higher temperature yielding plastic as the puck can get quite warm. I have retrofitted my pucks with extra passive heatsinks on the back…
A set of Initiative Tabs for a regular 2mm DM screen. Can be used for any ttrpg game, but these were designed with DnD in mind. The tabs are magnetic, and include a pause in the 3mf just before the layer that covers them. Rear and Front…
I made these to use as a monster tracker in initiative for my D&D games they print sideways so they are supportless nce you print the holder you need to buy cabochons preferably glass ones for the 2 inch version ( which i use for bosses)…
