4,345 models
TIP! Use lube in the bearing for optimal spinning :) NEW VERSION: https://www.printables.com/model/1345804-keychain-spinner
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Printed with 0.2mm layer height.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
MODEL DETAILS This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. If you liked this model, why not try out our other stress tests too? You can find out all about Revo Hemera XS here! RECOMMENDED PRINT…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for PETGSource material: PET
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Kumihimo, anyone? Kumihimo is a Japanese braiding technique, which can be made with a Marudai or a Kumihimo Disk, like this one. I'm making Kumihimo braids for several years now and I tried lots of different disks - but alsways the same…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
As thin as a toothpick and Stil 88 dB loud IMPORTANT: Use wall thickness: 3
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
A new box opener concept WD40 can be used to make it spin better
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Watch the motion of your 3D printer's extruder, Star Wars style. Embed a 6mm X 2mm tall magnet while printing, multi-colored as well with a single extruder (swap mid-print). Print instructions I used .1mm layers, since I wanted this to be…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Description I tried to make the model with a durable, stable and, above all, soft edge. First test models had sharp edges and were uncomfortable to use. Required part: 608ZZ bearings or any 608 bearing Bearing dimensions: 8 * 22 * 7mm…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
We purchased a secondhand Hi Ho! Cherry-O game... and the spinner was missing! This is the first model I have ever created– I used Fusion 360 and PrusaSlicer. Parts can be superglued together or pressure-fit– I recommend first gluing the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
In keeping with the original look of the front doors of the Original Prusa i3 MK3 Enclosure, this is a redesign of the front door hinges and front corner blocks so you can remove the doors when organizing or doing maintenance on the…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Created as a physical representation of nested hypocycloids . The .gcode was generated with the model scaled to 75% because it makes it a nicer size for fidgeting. If the nested version comes out fused together, you can download the…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Gyro-style fidget spinner featuring 7 interconnected rings, each rotating on its own axis. The smooth, multi-directional motion creates a mesmerizing kinetic effect that’s perfect for fidgeting, calming your mind, or productive…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
I modified the original model, which was flat on one side. It is an excellent toy for your cat. It will keep your cat entertained for hours.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
For the toy to work, you need to use random seam position! A tiny gyro-style fidget spinner featuring 5 rotating rings, each spinning smoothly around its own axis. Despite its compact size, it offers a surprisingly satisfying kinetic…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
The making of my Lack Enclosure was a very long journey but it was worth it I thank all the other makers who inspired and helped remix my own parts I hope this remix will inspired you to do the same ! Features Fully customizable and…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET
A small blow-powered toy inspired by a whistle. By blowing into the turbine, a tiny internal rotor spins and produces a mechanical sound, making it a simple yet satisfying interactive toy. The model consists of 3 parts. The covers snap…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Outdated Please go to https://www.printables.com/model/961742-honeycomb-storage-wall-90-degree-corner-4-variants to find updated models as well as new variants. Description My storage wall is partially standing on my desk and for that…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
I love Wind Spinners! I got some Blue ABS in the mail today. I like how the two winged cardinal came out, so I designed the body of a Blue Jay. I can't wait until my Prusa Multi-media adapter arrives. Then I can better color the wind…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
To fill inner tube you must remove valve core.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
Prusa Balance Game is great and the Prusa Balance Game Box is a great way to pack it. However, the Prusa Balance Game Box requires quite a lot of material. I have slightly adjusted the model by making the walls of the box thinner near the…
Print approx. €6.94–€8.49 excl. taxPreliminary estimate for one variant
Ninja Star (Shuriken) fidget spinners and stand! There are two versions of the model - the one with name “Rounded Corners” is the kid friendly version. I've also included the model for the stand that is shown in the photos - which makes…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
This is a live bucket trap for catching mice. I am currently using it in my attic and have caught 4 mice with it in a couple of days using peanut butter as bait. The mice venture out onto the spinner to get the peanut butter and then…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
An arc-style gyro fidget spinner featuring a combination of multiple rings that rotate in an engaging and unusual way. The curved geometry creates a unique spinning motion that feels smooth, dynamic, and visually satisfying. Perfect for…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This super-cute mushroom doubles as a fun fidget spinner. Holding the mushroom by the stem and then quickly spinning the cap with the thumb and forefinger of the opposite hand produces a smooth spin that can provide a fun, satisfying…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
This is a remix of the radius finders created by victornpb with inset numbers instead of raised.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Found this neat model by BreakfastDeluxe , but I wanted something simple and thinner so I can throw it in my caliper case. All credit stil goes to him, just performed a little z cut on his name at the bottom :p
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
My kid bedroom curtains had some eylets detached from the fabric, so as a replacement designed this simple model with 41 mm inner diamenter (similar to the original ones). .Printed on a MK3S+; . Filament clear PETG; .0,15 Layer height;
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback is welcome This custom-designed 4-gear fidget spinner combines mechanical ingenuity and playful functionality. Featuring a snap-in-place assembly, this spinner is easy to assemble without the need for additional fasteners.…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
These 5 gauges let you measure radiuses from 1 to 20mm. PLA with 0.2mm layer height will be fine, you may want to use two different colors, so a different one for the values. I recommend a light color for the fillets. This was created…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Foam Smoother Spinners for Shadowfoam to smooth out the cutout in your foam insert. With 1/4" tool shaft. Print in 0.10mm layer height to get a nice sharp edge and use 100% infill for more strength.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Minnesota Timberwolves
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant
Jonas original model is genius, But on the acrylic thinner bottle it was a bit tight and the clips did not seat properly, because on the side, the bottle has a raised design. I made this model from scratch using his idea. I shortened the…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This toy that you put on your keys looks nice, it's practical and you can play with it or do tricks.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Für die Montage im Bereich Foto, Kamera, Befestigung von Zusatzteilen aller Art. Diese Käseplatte wurde für die Befestigung der Verkofferung für “Custom Blackmagic Atem” entwickelt.
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Reinforced inner case for the GoPro carry case there is room made for: — GoPro — 2 Batteries — USB-C Cable — Max lens mod — Floaty mount — Magnetic clip — Screws&mounts
Print approx. €6.98–€8.53 excl. taxPreliminary estimate for one variant
This design started with just the merkaba star shape to fill a request from my father. It was fun to model, and turned out nicely with the clear Colorfabb XT filament. Then I discovered that it could be printed in spiral vase mode and I…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Wagon interior for H0 gauge.
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
print settings: PLA works fine! Happy printing :)!
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
This is a gear-shaped fidget spinner for use with a 608 ball bearing. I borrowed and modified Braunbaer 's screw-in caps from his fidget spinner . Printed at .10 mm with 15% infill. No supports. Edit: I've also uploaded an earlier version…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
I wanted the same great idea by Jonas but for the Mr Hobby 400 ml bottles of thinner.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
A remix of a butterfly knife model but with the blade removed and replaced with a simple rectangle to prevent cuts and allows you to flip it around safely
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for PETGSource material: PET
Ruhig den Einzug mal ausstellen und die Temperatur ein paar grad höher. Der Filter wird dann durch das Stringing sehr fein.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Simple remix of the spinner cone for multicolorprinting, as the glued version kept falling apart unfortunatly
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I noticed my spools aren't centered with the original design so I made a adapter that should go over the original nut. Print instructions lay flat on the large side. Printed them in PLA 2 perimeters 10% rectilinear infill worked for me.
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Da ich nicht immer den Gartenschlauch auf die Kabelrolle aufwickeln wollte, habe ich eine Halterung für ein 100er Fallrohr erstellt. Alle Teile können in einem Durchgang gedruckt und anschließend zusammengesteckt (und gerne auch geklebt…
Print approx. €7.31–€8.94 excl. taxPreliminary estimate for one variant
made from ASA, arm need to print twice
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Thinner walls from the original. I can adjust the model to include different container configurations, let me know.
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
3D Printy has provided a great tool, but let's face it, most folks don't want to learn a new language and would rather just have the STL. This set of STLs are specific to the Prusament spools with the cardboard center as well as Hatchbox…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
After creating my “game spinner” to allow selection of 1-12 (just like using a pair of dice). I revised it further to be used with the Prusa Balance Game (available here on printables). This is an easy print - If you use the printed…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Dieser Türhaken kann an der innenliegenden Seite von Türen, d. h. an der niedrigsten Seite befestigt werden. Wichtig: Bitte beachtet die Maße (s. Bilder) und druckt das Modell mit Stützen. Wenn dir mein(e) Modell(e) gefallen, hinterlasse…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
I thought the original design was too thick and damages the pages of the books. This is only 0.8mm, instead of 1.5mm original, which is much more friendly to paper pages.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Das Sieb dient zum Einsatz in einer Regenrinne meines Tomatendaches zur Filterung von Laub und groben Verunreinigungen. Es passt in ein Loch mit 30 mm Durchmesser. Gedruckt wurde es ohne Stützen und Rand mit PETG, damit es einigermaßen…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
This is a moving spinnable version of the quest marker icon from the MMORPG ‘Runescape’ made by Jagex. Introduced in the quest ‘Ancient Awakening’, The new in-game spinning quest marker was far easier to see and use. Reddit users were…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
This is a remix of the Removable pinned hinge doors for the Ikea lack Enclosure The new hinge incorporates locking bolts to hold the plexiglass in place NOTE This model is obsolete, but you may have a look at my latest version…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
🐉 Dragon’s Fang Wizard Staff – Channel Your Inner Sorcerer! ✨ Summon storms, control elements, or just rule your living room in style with the Dragon’s Fang Wizard Staff ! With a fierce dragon wrapping around a glowing arcane orb and an…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Po vytisknutí se odštípne podstava u špičky a je to. Tisk bez podpěr. Upravoval jsem středovou část a takhle mi to sedí.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Repairs Elko L3033 light button by adding additional structure inside of existing button. It will look exactly the same as original part, but will function much better and last longer. Print part from ABS or ASA because it needs to handle…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Model Odor trap cover for a drain pipe with a 40 mm inner diameter. Print Material PETG or PLA Nozzle 0.4 mm, layer height 0.2 mm 4 bottom layers, 3 top layers Scarf joins as needed Bottom infill pattern: Concentric (simply looks better)…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Propeller spinner cap for popular RC aircraft Volantex TrainStar in equal scale with side bolts mounting. No supports needed. For 6mm shaft Equal scale If you like it, please support me: Paypal: [email protected] Skrill:…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Der Pavillon Hersteller liefert leider keine Regenrinne mit. So das ich eine fertige kleine Dachrinne aus dem Baumarkt nutzen wollte “Marley Dachrinnenhalter”. Diese funktioniert jedoch nicht mit den angebotenen Halterungen. Daher habe…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
the g-code has the proper height of layer for the manual color change
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Ein 65mm Innendurchmesser und 135mm Hohes Y-Rohr mit Wandstärke 2mm und am Anschluss 3mm Wandstärke für Luftröhre einer Heizung für Wohnwagen Marke Eigenbau. Winkel zwischen den Anschlüssen ist 120°. Print settings: Layer height: 0.4mm…
Print approx. €6.28–€7.68 excl. taxPreliminary estimate for one variant
Halterung für das Auto-Innenreinigungsset der Kärcher Nass- und Trockensauger WDx. Damit diese in der Gartenhütte griffbereit sind habe ich diese Halterung konstruiert. Gedruckt habe ich es erst Mal mit Prusament PLA in Silber. Da es in…
Print approx. €10.18–€12.44 excl. taxPreliminary estimate for one variant
Este cover decorativo fue diseñado específicamente para ser compatible con la serie Cooler Master Elite Liquid Series, ofreciendo una forma simple y efectiva de renovar la estética del bloque sin modificar su funcionamiento original. Él…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Add an extruder visualizer to your 3D printer it's cool way to pimp your 3d printer. Quick print, print with supports . 0.4 mm nozzle, 0.2 mm layer height. Printed at 45 degree angle kind of looks better (second .gif). Please hit <3 if…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I teach a weekly, small class of dyslexic kids at my son's school about design thinking. The aim is to encourage them to think big and realise that even though they may not excel at school they can still imagine and then create amazing…
Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant
My love of all things Metroid demanded it. This print: comes in two parts - the spinner, and an 8mm “bump” to glue into the back to raise a 3mm thick magnet (if your magnet is thicker, you probably wont need this spacer!) has magnets! -…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Ein kleiner Fidget Spinner PRINT IN PLACE wird ohne Stützen funktionsfertig gedruckt. Diese Version V2 unterscheidet sich in der Auflösung ( 0,15) und dem Smiley. Nach dem Druck sind noch je zwei 1 Cent Stücke (€ Cent) in die Taschen der…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Ein simples Filterelement zum Einlegen in eine Dachrinne mit rechteckigem Querschnitt. Es soll verhindern, dass grobe Schmutzteile in die Regenwasser-Sammeltonne gelangen. Das Element ist 70 x 60 x 33 mm groß und wird - Achtung - im…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Hier ein Drehknopf, für eine defekte Salatschleuder. For my broken salad spinner I made this turning knob.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
This is a fidget spinner that you attach to some kind of base with a single screw. It consists of several 3D printed pieces, modified ball bearing and possibly several washers for M5 bolts. The modified ball bearing in question is the 608…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Toothbrush Holder that fits the curved wall in the Winnebago View/Navion 2023 24V. The model is attached to the wall using 3M Command Large Picture Hanging Strips. There are grooves on the back side of this model so that the strips are…
Print approx. €8.96–€10.96 excl. taxPreliminary estimate for one variant
Es gibt keine Besonderheiten zu beachten beim Drucken dieses Werkzeuges. Es soll eine Möglichkeit bieten auch Sechskantschrauben mit 13mm Durchmesser zu in engen Stellen zu lösen. Als Bspl. jedes handelsübliche Waschbecken hat genau…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
6 corner connectors for a box rain gutter Description : We have built a 6 corner garden house with a box rain gutter. But the corner connectors are only available as an optional accessory for a price I did not want to accept. So DIY…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Anschluss dient zum Ableiten von Wasser durch eine Schmutzwasserpumpe z.B. zum abpumpen von Teichen oder Sickergruben. Konstruiert für ein Fallrohr D100mm und einem Schlauchdurchmesser von 25mm( 1 Zoll ) . Benötigt wird des…
Print approx. €12.73–€15.56 excl. taxPreliminary estimate for PETGSource material: PET
Beginner Flute Key Plugs
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
The Magnetic gear spinner is optimized to showcase an ideal gear mechanism in the style of a fidget spinner. With its nearly frictionless design, only the ball bearing friction remains. Due to the arrangement of the four spinners, the…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Remixed "bearing holders" for the Spool holder for Prusa MINI Flexible by Madaco to fit Bones Reds bearings with a 7mm inner diameter. (the kind you get in the 16 pack). You certainly don't need skateboard bearings for this project, but…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a chess set, as similar to a regular one that I could make. It has engraved letters, indicating the intial of the piece; useful for beginners who may not be able to tell apart pieces when first starting. The king and queen can…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for one variant
This Hatak fidget spinner is made up of a spinning body section with a top and bottom pyramid section that connects via two small pins. The spinner body prints in one piece but will need some supports from the build plate for the rising…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Extruder indicator to make your prints faster ;) Simply press on the extruder motor and bada bing bada boom you got a neat lil wheel! I printed with a .2mm nozzle for the extra details but on a .4 I was getting respectable prints.…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for one variant
Korb für die Küchenwand mit Rinne. In meiner Küche gibt es eine Art "Rinne", in die man Halter und kleine Regale einhängen kann. Dieser Korb ist zur Ablage oder zum Laden von Telefonen geeignet. In einer Ecke befindet sich die…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required. I use it to secure the end of a digital caliper, to…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Korb 2 für die Küchenwand mit Rinne. In meiner Küche gibt es eine Art "Rinne", in die man Halter und kleine Regale einhängen kann. Dieser Korb 2 ist zur Ablage oder zum Laden von Telefonen geeignet. In einer Ecke befindet sich die…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
This a spinner with buttons you can press to relieve stress. There are five 5 buttons one for each finger and there's small notch in the back to spin the model. Or if you are feeling adventurous, you can take the 2 hubs separately, tie a…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
![Sewing machine spool & bobbin clip {Fadenrollen Klipp} [V2] (size:= M; L) // more powerful inner clip effekt](https://media.printables.com/media/prints/900668/images/6887835_da70503f-32a6-473b-9e4c-5a68c096e3aa_526eaf59-464b-4738-b9ee-614b38f723b5/2024-06-02_23h26_07.png)
