256 models
Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Use supports for the top lid. You need to open the access ports necessary for your setup with a N#11 Xacto knife, for example throttle, right aileron, Sbus an DSM Satellite, this way ports you do not use are covered. Close with 4 M2x10…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Easy to print heaset / headphone rest with original IKEA screws on the table. You don't need any additional parts. Print instructions 5% infill is enough Changelog: 22.03.2022: One part design (no more cones needed) add right version
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for PETGSource material: PET
Placer un insert M3x5 dans le trou du bras en chauffant légèrement et en étant bien dans l'axe (une perceuse à colonne fera l'affaire). Utiliser une vis tête hexagonale de M3x20 en ajoutant un peu de frein filet pour la maintenir en place…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Vytvoření pomůcek pro podporu výuky v předmětech: Přírodopis, Matematika , Fyzika , Zeměpis, Chemie, TV/Sport, Pracovní činnosti Využití 3D tisku ve spojení s výukou informatiky/ pracovních činnos
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
modeled these up for fun, couldn't fit any rods in it, but if you print them laying down and filament weld them together they should be pretty durable. Split for smaller printers Category: Props
One side of a minnow trap. I recommend using v2, it is higher resolution and less vertices because the edges are chamfered instead of filleted How to use: Print 2 of the Minnow trap sides (or one side and the cover) Connect the two sides…
This is a small Minnow Trap I designed to be printed taking advantage of the fast Honeycomb infill pattern in Simplify3D. Using the process setting below it takes the solid object files and prints them out without any top or bottom layers…
This is another swimbait that I am working on using the same fabric printing technique as my last swimbait. This one is modeled after a rubber minnow swimbait so it only has three sections. More info and build pictures can be found here…
Is it possible to improve the honeycomb infill pattern? Many slicers have one or two types of honeycomb infill patterns. But none like this 😊. This pattern is made from single non non-intersecting walls and without bridging! It also…
This is a larger version of my original Minnow Trap It uses two sections of the cage part and finishes with a 6" Diameter x 7" length. I printed this one ABS and used CA glue and accelerator to glue all of the pieces of this one…
I created this model using the player tray and neutral tray from @Raymond's version of AoI insert because I like them so much. Besides that, I was also inspired by Gaming Trunk's design for the resource tray. All other trays were designed…
Pokemon Generation 4 Sinnoh Gym Badges These were designed to be printed in different colors by pausing during printing and swapping out colors. Where to pause depends on your layer height, but it should be easy to figure out in your…
Replacement Piece For the True Innovations DPS 3D Insight Gaming Chair, This Connects The Rotating Lumbar Piece Under The Head Rest. You Will Need Hardware From The Existing Chair Since This Only Replaces The Rubber Arm. Installation…
Clone of an Innova Destroyer distance driver. Requires support, print upside down. Weight when printed solid are as follows: PLA - 154 g PETG / PC - 158 g TPU - 147 g Flies fairly understable, but I was still able to clear 400' with a big…
My take on the Linnorms uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy (paizo.com/communityuse). I am expressly prohibited from charging you to use or access this content. My take on the…
Hey fellow creators! Just wanted to share my latest project: a meticulously designed medieval bracer inspired by historical armors. A lot of time and effort went into making sure it's not just historically accurate, but also comfortable…
Realistic fishing lure designed primarily for catching zander in shallow waters. The model is shallow-sinking, floating when filled below 20%. It is made of transparent PCT-G, due to the durability of the lip and its transparency. The…
This minimal mounting for the Inno-Maker 1080P camera is excellent and gives a great view to monitor your printer, I designed it for my Voron but it will work on any 3d printer really, as long as you have a Raspberry Pi with a free USB…
An artistic mask, perfect for home decoration, artistic performances, costumes, or simply experimenting with painting and finishes. In this file, you will find the mask with or without the attachment system. I also added a .3mf files to…
My takes on the Void Dragon and Water Linnorm uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy ( paizo.com/communityuse). I am expressly prohibited from charging you to use or access this…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 Hello, for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused…
This is a remix of grildensnork insert. I was not too fond of some of the trays, so I remixed it and shifted some stuff around to better fit. I'm still not that happy with the original hex tray and might remix it as well, also now there…
INNOCN monitor comes with a detachable magnetic kickstand that props it up. I needed it to be higher off the desk rather than just sitting on it. Initially, I modified MakerBot's headphone stand, but then decided to model a new one from…
The Ultimate Space-Saving Clothes Hanger with Innovative Features Transform your laundry routine with this innovative foldable clothes hanger designed for maximum versatility and convenience. Key Features: Space-Saving Foldable Design…
This is a trophy for innovation awards.
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
Since I am using a Innomaker camera module, i was looking for a mounting, that is compatibel with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 from @sneaks. This model is therefore aimed at those who use a innomaker…
Void Winnower mini. I did not expect this to be able to stand without a base. If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
the hoops take fare less place with this hooks, it's a great organisation improvement. printed with no supports. for the fixation., you need three countersunk screw (head diameter=7mm and thread outer diameter=4mm) printed in PLA one year…
Do you own IKEA but wish you had a better way of holding your headphones? Well have I got the solution for you. Introducing: this model. Printing Instructions: If I'm being honest, I probably could've designed this to be easier to print.…
Prints with no supports, pushes into plugs.
Découvrez le modèle 3D du Stickman Innocent, une figurine qui incarne la pureté et la candeur. Imprimez ce modèle en 3D pour ajouter une touche d'innocence et de douceur à votre collection. Le Stickman Innocent est représenté avec une…
The SuperCat mole trap is far the best mole trapper I have ever used. !!!!This is only the hole cutter!!!! Search the net or amazon.com for: Swissinno Solutions SuperCat VuldmusFall In Swedish, sök efter: SORKFÄLLA PRO SUPERCAT Eller:…
Simple yet effective trap suitable for capturing shrimp, crawfish, minnow, and other creatures. Free, open-source, parametric; designed using ShapeScript . Features Corrosion-free (leaves no rust marks on your boat); No electrolysis next…
Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…
Frame for inserting socks into Brother Innovis F540E embroidery machine Made in collaboration with @Bibik_2062343 This custom frame (13x18 hoop) will allow you to embroider designs on socks (or at least make it easier and more…
Looking for a low power home lab with high performance networking? Upgrade your Intel NUC 12 Pro with a 10Gbe LAN module! Works out of the box with ESXI8 and Proxmox 7.4 and uses about 12 watt idle in Proxmox, 14.5 watt idle in ESXI.…
Simple case for the Innomaker USB2CAN CAN-bus to USB adapter. It does not require any additional fasteners
Needed a housing for my InnoMaker day and night vision camera so I added opening in the housing to accomadate the light sensor and cable connection.
Base file is for the bottom layer to add stability to the tower. Extra requirements: Side holes are 4.2mm, use M5 thread tap taper drill bit tool; Top/Bottom holes are 5mm, use M6 thread tap taper drill bit tool; 5x8mm and 6x16mm studs…
Innovatives Hamsterlaufrad unter Ausnutzung der maximalen Druckfläche (X1C) Dank Hohlbauweise mit Steg im Fuß ist die Konstruktion sehr(!) stabil. Stückliste: Zum Einsatz kommen zwei (gebräuchliche) Kugellager: 608 ZZ Kugellager, 8mm x…
This is an inno-maker usb-dac case. Optimized for raspberry pi zero w. You need M3x8 (or M3x12) hex head screw x 4 M3 din562 square nut x4 Details of usb-dac https://www.inno-maker.com/product/hifi-dac-hat/ Enjoy your Volumio life. Print…
the standard version of this hook need three screws, and the skadis version is compatible with the Ikéa skadis pegboard. if you decide to print the skadis compatible version, you need a hammer to push "gently" the skadis hook in place, be…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I included a ventilated and non-ventilated back panel. With how warm the camera gets I recommend the ventilated one. Files also include the mount for camera to attach to a wall with command strips or other double sided tape. (Plus a…
Description Introduction Unleash the potential of your living space with our customizable Wall 3D Panels, meticulously designed to add a touch of uniqueness and personal flair to any room. These panels are not just decorative elements but…
Printed on Ender 3V2 PLA plus filament Perimeter of 4 Printed upright with supports
Topfdeckelhalter zum aufklicken an die Relingstange des Hettich InnoTech Schubkastensystems für mehr Ordnung in der Küche. Der Halter ist vorgesehen für WMF Glas-Topfdeckel, passen jeweils für die Durchmesser von 21,5cm und 17,5cm.…
This is a simple case for the Inno-Maker Rpi HiFi AMP Hat and Raspberry Pi Zero W. To assemble, simply mount the Inno-Maker hat on the pi Zero. Place the mated circuit boards into the case bottom. Finally, snap on the lid. This model does…
Wide minnow scoop V2 Model added - Made handle more comfortable
brother innovis 15 bobbin cover
Extra requirements: all holes are 2,5mm, use M3 thread tap taper drill bit tool; 3x8mm and 3x4mm studs for assembly.
The source marked this model as adult content.
Floss tray for Innovative Marine NUVO 40 AIO If you find this helpful, your support will be much appreciated: https://buymeacoffee.com/hyluong
Case should just snape together, you'll want to hot glue the cable for strain relief and affix the camera permanently (hot glue or super glue) to the bottom piece. Holes are 2" spacing. Not great at CAD so it's pretty messy, but here is…
The Bright Spark Innovator Award is a captivating 3D-printed trophy that boasts a meticulously designed lightbulb as its focal point. The lightbulb signifies the essence of innovation and creativity, with a gracefully curved filament…
Der 3D-gedruckte Visitenkartenhalter bietet eine perfekte Kombination aus Funktionalität und Ästhetik, da er in einem modernen und schlanken Design gestaltet ist, das zu jeder Art von Schreibtisch oder Büroeinrichtung passt, und einen…
A simple mount that holds a INNO-Maker U20CAM. The magnetic corner mount works with 6x3mm and 6x3mm round magnets. I'm using a Raspberry Pi and a custom made script to upload the images to Prusa Connect: Script:…
Print the other side in the mirror. You will need additional two 20mm spacers. In theory could be used on other frames with front spacers of 20mm. Camera angle is at 25deg.
This is a camera mount for the Innomaker Raspberry Pi camera module to mount it on a regular 2040 V-Slot rail. I use the 2040 v-slot rails as a small transportable DIY optical table. The camera module is 39 mm x 39 mm, the holes have a…
This easy-to-install riser sits in front of the overflow compartment, raising your water level to a more visually appealing height. It's designed to be flush with the rim of your AIO 50 Lagoon, maintaining a clean, seamless look while…
Amaxinno freestyle frame - vtx pigtail holder at 45º Made this for a friend to use on his 5" frame. Design with the rear/back divider/plate in mind. No supports are needed. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts:…
A printable case for the Raspberry Pi (only tested with a Raspberry Pi 3 Model B/B+) and Innomaker Amp Hat. This case is a rework of the excellent work of @gcauwenberg's case and allows the Innomaker Amp Hat (RPI-HIFI-AMP) and my…
As the seasons change, so does our inspiration! At Vertex Design, we're thrilled to showcase how 3D printing allows us to blend holiday fun with functional decor. Say hello to our Jack-o'-Lantern Planter , ready to bring a smile (and a…
Camera holder in the style of TinkrMakr's PiCam mount but for the InnoMaker Raspberry Pi Camera Module OV5647 . The two halves clip together around the camera module and attach to the X-Axis motor.
A simple dummy cad model of the backdraft phoenix to aid in integrating the phoenix into your design. If there are any mistakes make a comment, I may or may not remember to check for comments. All credit to Aiden Walsh at Backdraft…
The Death of Saint Innocent at the Louvre
These are legs 10 inches long to add to my Furinno "Turn-N-Tube" end table in order to raise the height up a bit more. You can see in my photo I added them at the bottom and added another shelf of heavier material to keep the table stable…
You will need to clone and mirror it to make a whole back cover, designed to be able to print on most printers
This is a 1" pegboard mount/holder for an Innova 3320 multimeter. The design is essentially a copy of jww's thing 2024376 on Thingiverse, though I designed it in Fusion from scratch. I recommend printing with 3 walls and 20% infill for…
Finally after several trial and error, I managed to create the GPU travel kit for my GPU, which is: Inno3D RTX 5080 X3 OC (the one with vapor chamber) the 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's…
This is a mount for the Merkury Innovations smart wi-fi camera (model cw007). These cameras are sold at Walmart for around $25, but they don't come with any sort of mounting bracket (just a piece of double sided tape). I made a slight…
You may want to sand the bottom to make it rougher Use the supplied rubber tape on the camera bump to the top This has a back stop so the camera doesn't slide to the ear and a tiny bottom mount to take up space left around the mount Use a…
This is an inkwell type support for the screw top stylus support supplied with the XP-Pen Innovator graphics pad. I wanted something to support and give some weight to the screw top pen support and designed this simple thing in Fusion…
Incubator water plug
I replaced my Innovative Marine Fusion Lagoon 25 gallon aquarium pump with Hydor Seltz D, the default nozzles too strong. This Flow Diffuser Nozzle will take the strong flow from the Seltz D pump and disperse it evenly throughout the…
Momo steering wheel holder NRG Innovations SRK-400BK Black Quick Release Thin Version
It is currently with a 0.2mm spacing, you can change that in the Fusion360 file if needed. For me just opening/closing it a few times was enough. Now it closes thightly, but is still easy to pen.
With a mount for a Raspberry Pi zero, so you need only a power source to stream a video.
Travel case for your favourite iFixit set that stays closed even on the bottom of your backpack. Opens like a flip phone. Print with PETG and 0,2mm layer height. Use piece of filament as a hinge. Heat and press ends of the filament to…
this is waluigi and you just need to download, print, and place
I am a big fan of the game, but unfortunately the original box cannot accommodate sleeved cards. So I created a card holder which can fit sleeved cards (verified with Dragon Shield). There are separate slots for cards for each era of the…
This is slim enclosure for the Innovateking DC USB buck converter (https://www.amazon.com/dp/B087RHWTJW) no special print instructions. additional notes I'm interested in your feedback to improve my stuff! So give me likes, post makes,…
Mounting accessories to mount a “Innomaker U20CAM” camera (found on Amazon, does 1080p30, has manual close focus distance, very wide angle, and works well with Linux/Crowsnest) in a Voron V0.2 top lid. On the Umbilical Mod board, there is…
Quite straightforward, can be printed in PLA. it is designed not to have any vibrations and to precisely see the nozzle all over the plate, many iterations in angle and position! Admittedly, the camera has a good quality but the depth of…
Tangoinnos Fire4000 Rangefinder Front Protective Cap. Cap rotates 270 degree to lay flat on the unit. Detent built in to keep cap open. Frame clamps onto front of unit. Bill of material (1) M3 x 3mm CNCKitchen threaded insert (1) M3 x 8mm…
Easy way how to create SMART mouse trap. Simple adapter for very good mouse trap Swissinno No See No Touch for Sonoff Zigbee Window/Door sensor SNZB-04. Simple adapter helps to put senzors on top of mouse trap. I'm using Home Assistant to…
Keep your bathroom clutter-free with our sleek, two-piece toothbrush holder. This isn't just any organizer – it's a revolution in dental hygiene storage! Key Features: Accommodates the whole family: 4 slots for electric brushes, 3 for…
For Innokin Kroma R and Innokin Prism T20S (A) , Innokin Kroma 217 and Z Force (B).
The cap of my Innokin Klypse broke. After looking online for a replacement, I couldn't find any so I decided to make my own. There is some room for 2 magnets (2 mm x5 mm). I printed mine with a 0.12 layer height.
Overview Funny Cat Figurine with Knife Ruin the Innocent (Probably) Meet Ruin. He’s a cat. He’s holding a knife. He looks just as surprised as you are. This playful figurine captures that exact moment when something definitely happened……
Alignment pins, funnel for pouring. Any issues let me know.
Just a quick adjustment of the model (not perfect) to fit the minnow driver set from ifixit
IFixit Minnow Driver Kit Wall Holder. Can use Medium Command Strips either horizontally or cut one in half vertical. Command-Medium-Adhesive-Hanging-Removable Can use two screws as well to mount.
