Counting matching models…
Since I am using a Innomaker camera module, i was looking for a mounting, that is compatibel with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 from @sneaks. This model is therefore aimed at those who use a innomaker…
Simple case for the Innomaker USB2CAN CAN-bus to USB adapter. It does not require any additional fasteners
Needed a housing for my InnoMaker day and night vision camera so I added opening in the housing to accomadate the light sensor and cable connection.
This is an inno-maker usb-dac case. Optimized for raspberry pi zero w. You need M3x8 (or M3x12) hex head screw x 4 M3 din562 square nut x4 Details of usb-dac https://www.inno-maker.com/product/hifi-dac-hat/ Enjoy your Volumio life. Print…
I included a ventilated and non-ventilated back panel. With how warm the camera gets I recommend the ventilated one. Files also include the mount for camera to attach to a wall with command strips or other double sided tape. (Plus a…
Case should just snape together, you'll want to hot glue the cable for strain relief and affix the camera permanently (hot glue or super glue) to the bottom piece. Holes are 2" spacing. Not great at CAD so it's pretty messy, but here is…
This is a camera mount for the Innomaker Raspberry Pi camera module to mount it on a regular 2040 V-Slot rail. I use the 2040 v-slot rails as a small transportable DIY optical table. The camera module is 39 mm x 39 mm, the holes have a…
A printable case for the Raspberry Pi (only tested with a Raspberry Pi 3 Model B/B+) and Innomaker Amp Hat. This case is a rework of the excellent work of @gcauwenberg's case and allows the Innomaker Amp Hat (RPI-HIFI-AMP) and my…
Camera holder in the style of TinkrMakr's PiCam mount but for the InnoMaker Raspberry Pi Camera Module OV5647 . The two halves clip together around the camera module and attach to the X-Axis motor.
With a mount for a Raspberry Pi zero, so you need only a power source to stream a video.
Quite straightforward, can be printed in PLA. it is designed not to have any vibrations and to precisely see the nozzle all over the plate, many iterations in angle and position! Admittedly, the camera has a good quality but the depth of…
Mounting accessories to mount a “Innomaker U20CAM” camera (found on Amazon, does 1080p30, has manual close focus distance, very wide angle, and works well with Linux/Crowsnest) in a Voron V0.2 top lid. On the Umbilical Mod board, there is…
I just found it easier to mount the camera on a stand vs linking it to the x-axis motor.
A simple camera mount for the skeletor duct so I could speed up skew calibration and check how accurate the XY axis are with unidgen/SkewCamera There is now a V2 version that puts the camera in a case that can be snapped into different…
A simple camera mount for kobra 3's to check skew (Klipper-go does not support software skew correction, unfortunately) and how accurate the xy axis are with undigen/SkewCamera There is now a V2 version that puts the camera in a case that…
Height adjustable mount for InnoMaker Raspberry Pi Camera Module 5MP 1080P OV5647 Sensor with M12 FOV90 IR Filter LEN For Raspberry Pi. I used an 8.2mm OD aluminium tube in the stand - which could be substituted for a 3D printed tube.…
This is a remix of the main housing of @Rainer's Core One ESP32 Camera Case. I was looking for a USB Plug-&-Play solution for my Core One to connect straight to my Octoprint Raspberry Pi. I didn't like the ESP32-CAM module so I decided on…
I suggest printing the Front part at 100% Infill and 3 Walls. The back cover is fine with 25% and 3 Walls and should be printed with supports (Clamps Up) (Sadly I didnt calibrate my new filament properly for the first print as seen i had…
Innomaker U20CAM 1080p USB Camera Enclosure A custom-designed, 3D-printable enclosure specifically made for the Innomaker U20CAM 1080p USB camera module . The enclosure provides a compact and practical solution for protecting the camera…
A compact case and tilting desk stand for the InnoMaker 1080P USB2.0 UVC camera (130° wide angle, 32 x 32 mm PCB, M12 lens). The camera board sits in a small housing with a front bezel and a vented rear cover. The housing tilts in a…
This is a remix of the main housing of @Rainer's Core One ESP32 Camera Case. I was looking for a USB Plug-&-Play solution for my Core One to connect straight to my Octoprint Raspberry Pi. I didn't like the ESP32-CAM module so I decided on…
I just found it easier to mount the camera on a stand vs linking it to the x-axis motor.
