Innomaker U20CAM 1080p USB Webcam Enclosure

Innomaker U20CAM 1080p USB Camera Enclosure

A custom-designed, 3D-printable enclosure specifically made for the Innomaker U20CAM 1080p USB camera module.

The enclosure provides a compact and practical solution for protecting the camera electronics while keeping the lens exposed and accessible.

Features

• Designed for the Innomaker U20CAM 1080p USB camera module

• Dedicated front housing with a circular lens opening

• Ventilation slots for improved airflow and heat dissipation

• Modular, multi-part construction for easy assembly and maintenance

• Compact design suitable for robotics, computer vision, monitoring, and DIY projects

• Access for the USB connection

Printing recommendations

• Recommended material: PETG for improved thermal resistance and durability

• Layer height: 0.2 mm

• Infill: 15–20%

• Supports: Depending on print orientation

Parts and assembly

The enclosure consists of three separately printable parts:

• Main body: Houses and supports the camera module

• Front cover: Protects the camera and provides a dedicated opening for the lens

• Rear panel: Closes the enclosure and includes ventilation slots

The separate components make assembly and maintenance straightforward and allow each part to be printed in a different color for a customized appearance.

Required hardware:

• 6 × self-tapping screws, 2 mm diameter × 8 mm length

Position the camera module inside the main body, then secure the front cover and rear panel using the self-tapping screws.

Refer to the exploded assembly view for the correct positioning of all components.

Note: This is an unofficial, community-designed enclosure and is not affiliated with or endorsed by Innomaker.