Counting matching models…
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
This is a logo to print in White and glue on the camera cover for Darts Camera and LED Ring mount by 3DEngelen.
These boxes have rounded insides and finger recess, and we use them for cutlery in our kitchen drawers. They are for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). I use these to store cutlery and other…
Description: A mystical pirate-style treasure chest sits open, revealing a glowing dragon egg nestled inside. From the chest, a small, newly hatched dragon emerges, its wings slightly spread as it curiously explores its surroundings.…
Since the box of Oranienburger Kanal is so big I thought I could store another great 1-2 player game from Uwe Rosenberg inside it as well. Please note: The drawers are oriented in a way so the bottoms are in the center so you can grab the…
This 3D-printed fidget model features a sphere inside an octahedron. The sphere has just enough room to move freely inside, allowing you to spin and rotate both the sphere and the octahedron in a few different ways. For the best visual…
This 3D-printed fidget model features a sphere inside another larger windowed sphere. The inner sphere has just enough room to move freely, letting you spin and rotate it within the outer shell in a couple of different ways. For the best…
A great Wall Art of Bing Bong from Inside Out (Vice Versa). Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used a children’s coloring
Print in place, no assembly, no glue, no support and less purge! No CFS AMS 3MMU required (different h-sizes, separated parts). Play with heights to add shades if you are using transparent filament! Personal use only, original fan art, do…
Case holding IDs or credit cards up to 2.25" by 3.65" with a space for a barcode and hole at top for lanyard clip or key ring.
Vaelntine's Heart Fidget turned inside out. Make sure you have good bed adhesion before printing (0.4 mm nozzle recommended). Happy Valentine's Day! If you like this fidget, then feel free to check out my fully parametric polygon fidget…
Insert for the Insider boardgame from Oink Games Printed using PETG with a 0.4mm nozzle (i did not test with PLA as some of the walls are 0.8mm wide)
Do not use Support on a slicer app (e.g. Cura) otherwise the inside would be filled with plastic filament (won't work).
This is a simple enclosure for a ferrite rod 4:1 balun, made of a plastic 32mm diameter tube and two caps at the ends. One side is capped with a simple speaker wire terminal for the antenna wire (M4 threaded), on the other side there is…
NOTE: PAY ATTENTION to the orientation of the cone and mouthpiece during assembling. Assemble instruction: Break the ball inside the whistle using a screw driver. Slide the cone into the whistle mouthpiece. Pay attention to the shape of…
I wanted an AT-AT style pen pot for my desk, originally with a head and legs but ened up scrapping that idea as it was too high/taking up too much space. I do however have the parts made/remixed from someone elses models and if enough…
Print your own Shin Kai that can glow! Model snaps together firmly. Recommend using PETG to avoid warping that occurs with PLA and printing by object instead of by layer. I made this flat instead of tapered and curved to avoid the need…
This is a modular 3D-printed funnel system designed for silica gel containers with M42x4 threads . The funnel completely replaces the original cap , allowing clean and controlled pouring without spills. Thanks to its modular design, the…
This design is an additional upgrade for this official part: https://www.quadlockcase.eu/collections/shop-mounts/products/bike-mount?variant=262854443024 that allow you to fasten the locking mechanism a little more elegantly than tied…
Repair piece for a Redragon Brahma volume scroll / roller (it goes inside the metal scroll) If your Brahma volume scroll isn't scrolling anymore, this may help you. You will probably need to trim the cylinder (a octagon actually) that…
This cracked egg hatchling figure features a small chick emerging from a broken shell. The shell edges are thick and rounded for safe, clean printing. The chick is simplified with minimal facial features and tiny wings tucked close to the…
DE 🇩🇪 „Diese 3D‑Chassis‑Modelle zeigen das finale Innenleben eines modularen R2‑D2‑Projekts. Sie dienen als Referenz, um ein bestehendes Hasbro-2002‑R2‑D2‑Modell mechanisch und elektronisch zu tunen (Elektronik, Sound, Licht, Bewegung –…
Pre-Filled Easter Egg – Print-In-Place Twist-Open Surprise Egg (V1) Bring some magic to your Easter prints with this print-in-place, twist-open Easter Egg that hides a fun surprise inside. Designed to be support-free, easy to print, and…
Do you have leftover Filament boxes? Do you need space for organisation? Then you have come to the right place! I generated a gridfinity baseplate fitting my leftover filament boxes from "The Filament", but it should fit other filament…
A keytag that has a small compartment inside it that could be used, for example, for a microsd card or some other small item. The cap is twisted onto the case and a small wire ring (as in picture) is used to keep it locked and attached to…
💡Why? I have found that I have an affinity to using macros for efficiency and productivity. My solution for my unsatiable need was a macro pad. I have had macro pads in the past such as a repurposed USB numpad, DIY Adafruit and keyboard…
This was made for the bottle of 19,5mm diameter - scale it up if you need bigger/smaller :) If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any…
A box inside SUNLU 1kg filament spool for silica gel for roller dryers, as well as for storage in zip-lock bags (without vacuuming). P.S.: More is not better, use about 30g (half of the box or one full portion of the extractor) so that it…
NOTE: This design assumes you have a 35mm door, you will need to adjust it for other door thicknesses. Background I needed 6 interior cat doors, so I took this opportunity to go through multiple design revisions. What you see here is…
This is a holder I designed for the VSD Inside N4 Pro. It is a tray meant to be mounted to wood or aluminium extrusion. I made it as a tray so the unit doesn't move, and all the ports are accessible and it can be relocated easily.
SG116MAX replacement inner wheel with added material to account for weaker filaments.
This is a hard case designed to fit inside the bag for Radio Link's radio-controlled transmitters.
This organizer shape was designed so the pouch would easily slide in each niche while spreading the contents inside evenly to save space. All the pouches can be seen and easily taken from any angle. Prints with no supports :) As usual,…
you need: Pneumatic push-in fitting https://www.amazon.de/gp/product/B098SYV68R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hexagon Nut M8 PTFE-Tube Ø4 Printing Instructions/Materials: Print Resolution: 0.1 Material: PETG
I am always short of some bricks when creating LEGO MOCs (My Own Creation), so I am using FreeCAD and my printer to create temporary placeholders when prototyping. This model is a brick compatible with LEGO's brick no. 15254 - Brick w.…
Work in Progress… This design will be parametric in the future. If you need specific dimensions, let me know in the comments. I printed both with fuzzy skin (cura experimental setting).
Inside Out - Anger , Pixar movie !!BUY Anger GET 2 OTHERS FREE!!
Inside Out - Sadness - Pixar movie 4 colors no AMS keychain earrings etc.
Inside Out - Fear movie Pixar, 3 color no AMS keychain, earrings etc.
Inside Out - Fear - Pixar movie 3 colors no AMS, keychain, earrings, etc.
Adaptor for my Trashbagholder https://www.printables.com/de/model/841043-trashbagholder-campervan
Jednoduchá visačka se jménem uvnitř - simple tag with name inside
All LEGO L.G.S. head of animal but without the head inside. It's just the shape of the animal. For now, only the wolf head is make, i go upload more soon. Jacob Quintana is the creator of this model. Jacob Quintana page:…
Just a quick east little drawer organizer mi drawer will fit 6 of these. Printed with 5% infill, nothing fancy and im sure there is a million of them out there but im trying to learn blender and this is easy enough for anyone.
The purpose of the box is to be mounted on the hose nut without damaging the wall or any bathroom equipment and to be easily disassembled. This box is an ideal design for your tools such as razors, soaps, etc. During assembly, 2 pieces of…
Even when I lock the car from the inside, the inner lock of the trunk can open the trunk door. I was afraid my dogs could accidentally open it, so I printed this safety plug to make it impossible to unlock the trunk from the inside…
This rack mount allows you to use ¾" dowel rods to hold filament in a cupboard. The poles snap in so they don't interfere with the spools, and the hole is just slightly smaller than 19mm to ensure tightness. The idea with the space on the…
Gridfinity 1x3 Storage Bin for the PB Swiss Insider Stubby Ratchet Screwdriver (PB 8453.R-30)
Since a variant of my fidget gear rings with knurling on the inside was occasionally requested, I made this one with diamond knurling outside and inside. It is available in 4 ‘odd’ sizes: 15mm, 17mm, 19mm and 21mm inside diameter. Also…
I designed these hex nut shells because I wanted to create begleri that have good ergonomics and weight. The weight comes from the nuts, and the ergonomics from 3D printing. They are meant to be used 2 on each sides of the string. The…
Resin printing is a smelly business. Anycubic Photon has for some very strange reason a 50mm fan inside the printing area that fans all the fumes out from the printer. This is really catastrophic so something has to be done. I designed…
Auf meinen Brevets habe ich immer eine Erste Hilfe-Tasche dabei. Damit im Falle eines Falles dies auch von außen sichtbar ist, habe ich mir ein kleines Schildchen gedruckt, welches ich mir an die Fahrradtasche befestige, wo sich das…
Created this for a cap i needed on propane tank. inside dimension is 57.35mm fits 57.16 part perfect.
Modified version of the cover by @Zito55_148891. Modified so that a 4010 fan can be mounted on the inside. (ATTENTION - check that no cables can get into the fan. If necessary, use a fan grille) I had a little more than 20mm of space for…
Will fit all of the Milwaukee Insider Electric Ratchet bits that come with the tool. Designed for the OlsaTools Tool Grid Platform. Printed in PLA+ with 0.2mm layer height, 15% infill, supports enabled, and 4 wall loops.
V3 UPDATE 04-Nov-2023 - Created hygrometer mounting plate for simple set of sensors, removed adafruit sensor thing; updated spindle spinner to include spinning handle for each part; updated spindle holder; added blank spindle plug to fill…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
This is a remix of Peter Farell's awesome Poison Bottle I changed the shape of the cavity inside the bottle so that it prints well without supports, so you're not left picking out the support material with tweezers. Also cleaned up the…
15% infill 0.20mm Supports on for plants and geo pot
Anxiety from Inside Out 2 gave me an idea for a quick and easy “costume” prop. The characters very large eyes and frizzy hair reminded me of the Sesame Street Yip Yip Martians and I wanted to make something that blended the two. Assembly…
For really narrow openings, adding a funnel to the mix can restrict the passage too much. These funnels fit over the opening, not inside. There's a little lip so that the narrowest part of the funnel ideally matches the walls of the…
Ich habe den gerade neu erschienenden SUNLU-Filamentconnector gekauft und getestet. Es ist schwierig und benötigte immer mehrere Versuche, um das Filament (Ø 1,75) sauber zu verbinden, da es beim Rausnehmen aus dem Connector weich ist und…
IMPORTANT: PRINT THE star_star_cover.stl AT 98% OF ORIGINAL SIZE SO IT FITS. This the season, this the model! Christmas is (almost) here, and if you cant wait, then this model is great for you . Looks lovely , and with LED lights , this…
I've made this organizer to put cuttlery on the inside of a cabinet door and clear space on the shelve. The box includes drainholes and is detachable for easy cleaning. The fit on the holder is tight but works fine for me. You will need…
A nice egg model to hang up with Jesus inside. I made it for my mother we're 70s and 50s. I love feeling like a kid again…
This is an inside corner mount for the wired Nest Cam.
Update - January 2025 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Dog poop bag holder for Flexi leash I made…
Quick design I made for gifts. Printing should be extremely simple, though may need to adjust slicer for the text serifs. The “tall” model has the image/text raised much higher from the base. Also included is a project file for a fridge…
note: Work is still in progress but state is mature enough for building and testing f prototypes Bike trunk inside center triangle. Sits in between seat and bottom tubes and also improves aerodynamics, acts as fairing. WARNING 1 : Don't…
Update - January 2026 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Carabiner mount dog poop bag holder This is…
This remix uses the Filament Guides of the “ COBRA System for Original Prusa Enclosure " to set up a system for the MMU3 with all five spools inside the enclosure including the buffer. The following Parts/Models are used for the complete…
A Doctor Who coaster design in the style of the Walking Dead. Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Blue Creality Silver Silk Commercial Rights If you wish to have commercial…
Quick print for a nice inside corner brace for 4040 extrusions. Remixed from Piotr's remix https://www.printables.com/model/1012482-voron-corner-brace-2020-m5 which was a remix of JSB's original file…
Free loop for GARMIN FORERUNNER 235 watch strap inside size is 23mm by 6.5mm Printed on Creality K1 MAX Used filament from Fil X -- TPR90 Black Nozzle 220 Bed 60 on Creality Smooth PEI plate with hairspray and still was just sticking to…
Fred has been scaled down to 17mm wide (66.84% scale). 20mm calibration cube was designed in fusion360 to fit fred, models were combined in tinkercad.
This is my design for a stackable letter tower that can (and should) be illuminated from the inside. It is a two-color print, with one color forming the shell (or frame) and the second—preferably transparent—creating the fill. The set…
A great wall art of Sadness (Tristesse), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by…
Changed the model for the MK4s upgrade inside an encloser that the Nextruder don t hit at the Filamentroll after the MK4S upgrade . Assemble it with the straight side to the printer as seen at the pictures. With a small Allen key between…
You can put an IKEA GODIS glass in the vase and fill it with water for flowers. Glass IKEA GODIS 40cl has a diameter of 75 mm and a height of 160 mm. You can also use another long drink glass with similar dimensions. The vase can be used…
the remix that i’m remixing had a solid inside that didn’t fit on my potentiometer. i took the inside from another knob i found that was too tall for my liking. print with 0.15mm layer height for best result :)
Same model as original author minus the area for hygrometer. Maximum diameter for the silica gel is 0.55mm. The original design had 1.5mm holes. Make sure to set your wall generator to Arachne
I know, it's simple. I didn't search for this model, i just made it fast in a few seconds and wanted to share if it doesn't exist yet. I made it round, because pointy would be scary and hurts the fingi fingers…
Printed with tpu 95a works best with the softer TPUs the high speed tpu 95a is too stiff to make it work well.
Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly
This silica gel container is inserted into the spool of filament. It is not screwed on. It can be easily replaced with one hand. (fig.1) The color of the silica gel can be seen at a glance. (fig.3) The size is as shown in the figure.…
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
the original S1 was very noisy so Flsun decided to change that. they also offer a Upgrade Kit for early machines. In that upgrade kit a new Blower will be installed but due to its bigger dimensions they decided to do that in a seperate…
A great wall art of Boredom (Ennui), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a…
A great wall art of Embarassment (Embarras), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
A great wall art of Anxiety (Anxiété), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a…
I remixed the Peugeout 2008 II footrest model by Vaty79 and modify the logo to inlayer
![[ALCH] cutlery boxes with rounded insides (ModuBox)](https://media.printables.com/media/prints/8a666ac4-2334-4997-814b-8ad02c4b2f9c/images/9412881_28d81996-52a0-499a-af56-c34cce02ea14_e591874a-9a86-4732-87f6-48f9b6e52da4/img_3644.jpeg)
![[improved] Flexi Leash Dog Poop Bag Holder - Compact and Lightweight - Stores both Clean and Used bags - Poop bag roll dispenser storage inside and loop hook for full waste dog poo bags outside classic lead](https://media.printables.com/media/prints/1065815/images/8064434_3fb5692b-4c50-4329-b99a-209ed14d3893_52f5bdd9-190f-4f3f-bd91-414c9d94cc4b/04.jpg)
![Bike trunk / case inside center triangle [ OpenSCAD ]](https://media.printables.com/media/prints/1067494/images/8076391_ba56060f-aa70-4835-a69b-6661cb9b55ea_943cbb58-4cab-450f-bc94-32b4d78bc440/bike_trunk_2.png)
