202 models
I love the basics of the case made by @SSSR_SH_837849 but I needed one that was smaller and included a way to hold needles without everything falling out when I opened it so this is the remix. The original walls were pretty thin and there…
Print approx. €3.19–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
Since I had found nothing suitable for our 4-year-old daughter, I created a doll pump myself. This small pump and the "catheter" I modeled on the Medtronic 640G of my daughter. The scale of the stl is approx 1:1. I recommend to scale the…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Bonjour à tous, Voici une boite pour stylo insuline avec 8 emplacements pour aiguille avec des insertions pour des aimant de diamètre 10 mm par 2 mm.
Print approx. €7.98–€9.75 excl. taxPreliminary estimate for one variant
This is a case for the Medtronic insulin pumps commonly used in DYI closed loop systems. My son is a type 1 diabetic and sometimes the insulin reservoir would come loose from the pump. The manufacturer makes clips for these pumps, but…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Some days you don't want to carry everything in your kit, or you need just a pen and needle to toss in your backpack for a hike or class. This case allows you to safely carry your insulin pen with a capped needle and helps protect the pen…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
Originally this was designed to fit the Unifine Pentips, which I am using this for. It will fit pen tips no larger than 18mm in diameter. The container features an angled opening, which I thought would help prevent needles from falling…
Print approx. €10.06–€12.29 excl. taxPreliminary estimate for PETGSource material: PET
I created a simple box for holding 3ml and 10ml vials in a dense arrangement. Rather than using both with a hinge that could break, I opted to use 6x3 disc magnets, 4 per box, friction-fitted with the help of super glue. The design has 10…
I wanted a dispenser for my insulin needles that could hold a lot of them. The 110mm tall one should hold an entire box of 100 comfortably but there are smaller versions included if you prefer. The inside has a small slope to help them…
Insulin pen case 2.2 I have brought this project back to life after a long time. I think I had printed all the versions, so everything should fit. If not, tell me. For everyday use. Protects your pens from damage and direct sun. Diameter…
Easier and pain-free self injections: Injecting myself makes me anxious. This device takes away most of the stress by giving me an ergonomic grip on the syringe and automating the injection motion with magnets. After adding the syringe,…
For the cover plate the logo stands proud of the surface by about 2mm, so you can change filament and have a custom title color. Glue the two pieces together around the edges where they meet. I included placement pins that mate with the…
Holds about 16 bottles of 10mL insulin. I made it to fit inside the footprint of the very small Frigidaire table-top minifridge (bottom of fridge measures about 135x135x125mm). -Please ignore the terrible top surface quality of my print…
*********************************************************** Update *********************************************************** Edited the Omnipod retention tabs in the Omnipod case to allow for better overhangs.…
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
2/22/2026 Update: V2 Injection Assistant is now available. Get that one! Overview: Injecting myself makes me anxious. This device takes away most of the stress by giving me an ergonomic grip on the syringe and automating the injection…
I got tired of having to dig around in my stuff to find where my pen needles had fallen, so I designed a "clip" to hold them. This snugly holds 10 BD Ultrafine pen needles that can easily be removed before or after use. If you would like…
Penfill cartridge holder, made to fit fridge doors with 3mm thick walls.
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
I'm a happy Omnipod user, but one of the things I miss from Medtronic's system are the little couplers that come with each reservoir, making it very convenient to transfer insulin from vial to the reservoir. With Omnipod's system, there's…
I wanted something to transport my in use 10ml insulin vials, I use FAISP but it shoud work with most other 10ml vials dimension 52mm(H)x23mm(D). I looked at others people had designed but wanted something that could provide a little more…
What is it? Built to pair with my " Magnetic Injection Assistant ", this securely holds medication vials inline and at the correct depth while drawing your meds into a syringe. How to use: Add your vial to the Carrier (now is also a good…
This is an insulin pump stand. It holds the end of the tube above the pump to stop the insulin running out when you need to take it off. I use it for my Medtronic 670G pump but I expect it would work for other ones too. @3DPrintBunny
This remix is based on the original model of JoerT. The original design used magnets of 5x5 which I didn't have available. So I made a modified design that uses 4 magnets of 8x2mm (two in each part) I printed it for someone else (not…
A simple holder for standard sized injection pens. The openings should hold average insulin pens, or GLP-1 pens. Designed so it can be easily affixed to a fridge wall with double-sided tape. Tested with mounjaro/zepbound pens,…
This will store 12 Insulin Pens, 5 3m pen cartridges and 2 3ml vials. These are common sized with Insulin and Peptides. The Pen slots will hold many different brands of pen. This is supplied free, and do not give permission to sell…
Case 18 short and/or long acting insulin vials. Should be a snug fit on most printer Print at 0.25mm layer height and a 0.4mm nozzle. For separate color on the top to make the writing stand out, change the filament color prior to the 3rd…
I designed an adapter for NovoRapid Penfills to more easily fill the MiniMed pump reservoir.
Bonjour, voici la boite que j'ai créée pour avoir toujours à portée en cas de nécessité : 2 piles AAA 3 cartouches d'insuline Pumpcart pour pompe à insuline Ypsopump Il est indispensable d'avoir ces éléments facilement accessibles pour…
a simple holder for insulin and ozempic pens that clips on to the fridge door
I use these needles for my Mounjaro and recently needed a travel case for a road trip. Mainly something that doesn't make me feel like a drug addict with a pencil case. Specifically, these are sized for the BD U-100 8mm needles.
https://www.reddit.com/r/3Dprinting/comments/1dwvxol/medical_biohazard_trashbin_for_used_needles/ Wheels best if TPU Uses a M3 heat insert and M3x30 screw for the lid. And 2 magnets (5x3mm) to “secure” the closing lid For the biohazard…
I was looking for a good injection pen stand and was checking everywhere, what was available for printing, but felt like nothing was satisfying my interests. I wanted simple stand, that would hold majority of injection pens, will not flip…
A simple holder for standard sized injection pens + pen needles & alcohol swabs. The openings should hold average insulin pens, or GLP-1 pens. Designed so it can be easily affixed to a fridge wall with double-sided tape. Tested with…
This is a simple organizer intended for an insulin, GLP-1, or other injection pen, as well as the accessories that go with it. It has a compartment for the pen itself with a cutout on one side to make it easy to remove, a compartment…
All settings can be standard - except for number of perimeters, which I set to 4 to increase the strength. You do still need to refrigerate your insulin, this case is purely to reduce the chances of breaking your insulin vials when…
Medtronics insulinpump clip keeps breaking. Printable replacement part with similar design to original. Uses the originals rod and spring mechanism.
This is basically the same as https://www.thingiverse.com/thing:57281/files from “walter”. But I customized the options to use it as container for insulin "penfill" vials and generate bottom and top in one go. I generated models for 4…
Simple protective case for a single 10ml bottle of insulin, made to protect against bumps and shakes that might happen. It was modeled around a Novolog bottle (53mm x 23mm) so make sure to check what size yours are before printing. This…
You can store and transport up to 13x Insulin vials for 3ml Pen refill. It has thick walls and when you print it in a bright color it should not get not so quick warm inside.
Ich habe hier einen kompakten Behälter konstruiert zur Mitnahme einer Glaskarpule und einer AAA-Batterie. Gedruckt habe ich es mit Silk-PLA mit Dual-Color. Die Schichthöhe beim Drucken habe ich auf 0,1 mm gestellt. Damit funktioniert das…
It's not polished, but it's functional. you may have to use a deburing tool on the face plate to make it fit.
My wife's insulin pump clip was frequently breaking at the hinge's hole. A Replacement costs a steep 10 Euros here in Germany. 10 Euros for a poorly designed clip made out of a bit of cheap plastic. 🤬 So I decided to design and print one…
Box with sliding lid to hold small glass insulin bottles (vials). Keeps bottles separate so they don’t clank together No supports, brim, or raft required.
Insulin Pump Refilling Aid Designed to make drawing insulin easier and less fiddly for those using insulin pumps. Don't have a 3D printer? Find them on my Etsy store: Omnipod Refilling Aid Tandem T-Slim Refilling Aid Current insulin pump…
A simple holder for standard sized injection pens + pen needles. The openings should hold average insulin pens, or GLP-1 pens. Designed so it can be easily affixed to a fridge wall with double-sided tape. The holder has been tested with…
Buenas soy Juan soy diabetico y este es organizador para la insulina y las agujas. Lo uso para no olvidarme de tomar o ponerme nada. Te cuento como funciona: Cada vez que me tomo o me pongo la insulina lo cojo del organizador y cuando…
Insulin Pen Nadel Rohr für Diabetiker, um auf einer Seite neue und auf der anderen Seite gebrauchte zu verstauen. Mit verschiebbarem Boden, dieser muss im Druck eingelegt werden. Insulin pen needle tube for diabetics to store new ones on…
Insulin Bottle Container With Lid (lid is optional) A sturdy neat container I made to hold 8 insulin bottles (Insulin Aspart, Novorapid/Sanofi). 20x60 mm bottles. The lid can be used with or without magnets. Both the box and lid have…
A used needles box from insulin pens. I made this blue box and red lid for the sharps.
Der Behälter ist 13,6 cm lang, mit Deckel 15,3 cm. Also etwas kürzer und schmaler .Dammit das Insulin da rein passt muss man die Penkappen abnehmen. Wer das nicht will kann auch einen längeren Deckel nehmen.Dabei ist auch ein Dichtring…
Das Design hat Platz für einen Novopen6 und 4 Ersatznadeln (oder gebrauchte) in der Tasche mit dem Slider. Druckmaterial: Wie es erforderlich ist Layerhöhe: 0,20mm und 15% Infill
this model was designed for showing kids the concept of insulin allowing glucose to enter the cell. this model was requested by a child life specialist at Riley Children's Hospital for use in educating patients about their condition. most…
Dies ist eine Aufbewahrungsbox für ein gefülltes Insulinreservoir einer Tandem T-Slim Inulinpumpe
Jednoduchý model na 4 lahvičky insulinu NovoRapid 1,6ml, případně na AAA baterie, samozřejmě možná i kombinace. Víko k zašroubování zajišťuje, že obsah nebude při přenášení poškozen. Simple model for 4 amples of Novorapid 1,6ml insulin or…
Halter für 5x10ml Novorapid Durchstechflaschen
Important! I made this model for a friend without having access to actual penfill cartridges. I have used accurate dimensions provided to me, but I have not been able to actually test it with real cartridges. I used a printed one 😅.…
Stand for T Slim x2, Cartridge and Penfill for easy filling -------------------------------------------------- Halter für T Slim x2, Reservoir und Penfill für einfaches Befüllen -------------------------------------------------- all brand…
Holds 1 vial of insulin, 1 Medtronic MMT332A Reservoir Adapter, 1 Medtronic MMT332A Reservoid Plunger Sleeve provided for protection of items, but fit of items is very tight with TPU insert (probably too tight - difficult to get items out).
Parametric Insulin Pen Holder Keep your insulin pens standing upright to save space in the fridge. Easily adjust the model sizing by changing the parameters defined in the "ss" spreadsheet in the FreeCAD model. Category: Containers
This model is a substitution for the original piece for attaching the insulin pump to this holder. The original design is quite fragile so I have made a bunch for my father-in-law. Printing in PLA is not a problem and works just fine.
Run wires through this and wrap the bare conductors around the two points of contact to the pump. Then connect the other end of the wires to a 1.2-1.5v power source, such as an external AA battery pack. Warning: Most AA battery packs are…
Dispenser for Infusion set for the Tandum t-Slim insulin pump
Un rodamiento 608zz Altera de capa 0.2 Boquilla 0.4 Relleno del 10%
Fácil de guardar y transportar en el bolsillo sin necesidad de llevar mochilas ni riñoneras.
I created this as a visual reminder that I administered insulin to my dog with his morning and evening meal. Make sure you bend and cap your used needles and dispose of appropriately in accordance with local health department guidelines.
A small, pocket sized holder for pen needles in packaging and a place to put the used needles until you can drop them in a proper receptacle. The models should hold 1-4 needles in their packaging until needed, based on size selected. It…
Kaleido quer Version 2 ist Fertig. Die Längs Version wie auf de m Bild hat noch ein paar Bearbeitung (Rundungs nearbeitung und verfeinerung nötig)
turn an insulin pen into a silly writing pen!
I made protective case for one Penfil vial of insulin becose I was sick of that, that every that I found was need TPU elements, or it was just box made from PLA (or other material) and doesn't protect vial at all. That case was tested…
This life-size, non-functional replica of the MiniMed 780G insulin pump is designed to help you make custom pouches, holders and other accessories. Most of the model was captured using a high-resolution 3D scan. The transparent reservoir…
étagère permettant de stocker au frais l'insuline et le glucagon dans la porte de mon réfrigérateur
étagère permettant le stockage de mes cartouches d'insuline NOVORAPID PUMPCART dans mon frigo INDESIT avec un emplacement pour le GLUCAGEN
Buenas soy Juan soy diabetico y este es el "bote" organizador para la insulina y las pastillas que tengo que tomar. Lo uso para no olvidarme de tomar o ponerme nada. Te cuento como funciona: Cada vez que me tomo o me pongo la insulina lo…
If you've been told to refill your pump revivors then having somewhere to hold them in the fridge is kinda handy. I've designed this to hold a 10ml vial and a pump cartridge/revivor, it may also fit a pen cartridge but I don't have one to…
BETA BIONICS ILet Insulin Pump Wireless charger It's pretty straight forward; I needed to charge my pump and didn't want to remove the infusion set connector, so made a holder and there is a pocket on the side that allows the unit to…
Insulin Pen Case — InPen Edition (remix) Based on the original " Insulin pen case 2.2 " by Gonçalo Midões Remixed and resized specifically for the Medtronic InPen. Compact format — designed to take up as little space as possible in a bag…
Boîtier pour transporter un stylo à insuline et les piquettes pour mon père. Adapté aux stylos de marque Lilly de 3 ml. La fermeture est réalisée par 4 petits aimants de diamètre 8 mm x 5 mm. Je me suis inspiré d'autres boîtiers trouvés…
Modificada para seringa da marca SR com agulhas fixas e com nome
Insulin Pen Sharps Container that is not to big but holds at least a few weeks of sharps. Can be printed with a single layer change at layer 120 on the lid to color the text. Use supports to get the text color different on the lid. The…
I created this insert for the Nikupa travel insulin refrigerator. It holds 4 10mL Insulin vials vertically. 6hrs to print vertically or print in 3 parts for 2hrs print time. Here is a link to the travel refrigerator so you can keep your…
Clip on needle holder, holds 4 needles.
Medtronic Insulin Pump battery adaptor
This ergonomic case will be an indispensable companion on any trip, ensuring maximum safety and organization for your medical supplies. Thanks to its durable construction and reliable screw-on lid, it is also perfectly suited for…
Fits inside most diabetic supply travel cases. Holds 8 diabetic syringes, 1 Vial of insulin, and alcohol wipes. Fits on top of the ice pack in the case.
Buenas soy Juan soy diabetico y este es el "bote" organizador para la insulina y las pastillas que tengo que tomar. Lo uso para no olvidarme de tomar o ponerme nada. Te cuento como funciona: Cada vez que me tomo o me pongo la insulina lo…
A small, pocket sized holder for pen needles in packaging and a place to put the used needles until you can drop them in a proper receptacle. The models should hold 1-4 needles in their packaging until needed, based on size selected. It…
2/22/2026 Update: V2 Injection Assistant is now available. Get that one! Overview: Injecting myself makes me anxious. This device takes away most of the stress by giving me an ergonomic grip on the syringe and automating the injection…
Our cat now needs insulin twice a day and we find it easier to ensure we have given them both doses if we prep the needles the night before, so I made this that fits over a shelf in the fridge, comes off easily, holds the bottle and two…
Easier and pain-free self injections: Injecting myself makes me anxious. This device takes away most of the stress by giving me an ergonomic grip on the syringe and automating the injection motion with magnets. After adding the syringe,…
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
I made protective case for one Penfil vial of insulin becose I was sick of that, that every that I found was need TPU elements, or it was just box made from PLA (or other material) and doesn't protect vial at all. That case was tested…
Ich habe hier einen kompakten Behälter konstruiert zur Mitnahme einer Glaskarpule und einer AAA-Batterie. Gedruckt habe ich es mit Silk-PLA mit Dual-Color. Die Schichthöhe beim Drucken habe ich auf 0,1 mm gestellt. Damit funktioniert das…
What is it? Built to pair with my " Magnetic Injection Assistant ", this securely holds medication vials inline and at the correct depth while drawing your meds into a syringe. How to use: Add your vial to the Carrier (now is also a good…
Jednoduchý model na 4 lahvičky insulinu NovoRapid 1,6ml, případně na AAA baterie, samozřejmě možná i kombinace. Víko k zašroubování zajišťuje, že obsah nebude při přenášení poškozen. Simple model for 4 amples of Novorapid 1,6ml insulin or…
Are you a diabetic who struggles with the infusion set sticker not adhering as you remove the infusion set applicator? This applicator assistant for Autosoft injectors is just what you need to keep your infusion set in place and in your…
Holds 1 vial of insulin, 1 Medtronic MMT332A Reservoir Adapter, 1 Medtronic MMT332A Reservoid Plunger Sleeve provided for protection of items, but fit of items is very tight with TPU insert (probably too tight - difficult to get items out).
Fácil de guardar y transportar en el bolsillo sin necesidad de llevar mochilas ni riñoneras.
![[DIA] Insulin pen case](https://media.printables.com/media/prints/427577/images/3537562_ef5a52f2-2f16-443a-934b-b8addbb9a028/1.jpg)
