451 models
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant
Various 3D models of bell and arrow signs in various languages, including English, Spanish, Portuguese, French, Italian, German. The file is in Blender and can be opened for editing.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Printed in ASA so it doesn't warp, upright print no supports needed
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Repuesto interior para el muelle de una picadora manual. Altura de capa: 0.1 soportes: Si Material: PET-G Interior spare part for the dock of a manual chopper. Layer height: 0.1 supports: Yes Material: PET-G
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Die Tablettenbox bietet Platz für mehrere Tabletten. Dank ihrer abgerundeten Form kann sie ohne zu stören in der Hosentasche getragen werden. Die Gewindeverbindung sorgt für einen guten Verschluss und ist mit nur einer Umdrehung zu…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
- Mitsubishi Outlander interior part 6977A273ZZ - Printing of ABS is preferred. - Acabamento Parafuso Trilho Banco 6977A27
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…
There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the…
A treasure chest with an interior for storage. There are spaces for magnets in the ring, of course, in the slicer the spaces can be enlarged to fit the magnets you have.
🇮🇹 Architectural Wonder This model was created by Logan MDR The original MiniWorld3D Florence Cathedral model has been one of the most popular ones for many years – here is a fresh new approach, sure to catch the attention of both…
This part addresses a very specific inconvenience I had with my Prusa Core ONE. From time to time, I drop purge lines or an aborted first layer below the bed. To clean those out, I usually slide them to the front, only to have them get…
A universal key that works for my interior doors :) Notice : use it at your own risk! Print options You can print a full key, splitted in two parts. - or - You can print (without support) the thin one that I'm using in the video below. Demo
Remixed a design I found on thingyverse (https://www.thingiverse.com/thing:4648439) for a Renault Clio and the shape looked the same as the vw Amarok door panel clips, but only the dimensions differed a bit, so I updated the design with…
a modular lightsaber with the interior parts of a real lightsaber and interchangeable pieces that you can mix and match however you want. the outside casing slide on rails on the inside parts with a screw-in blade emitter and pommel to…
Incense stands. The first version is more loose and the second one is a tight fit one. Both fit the same regular sized incense sticks. Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal…
Star Wars Sandcrawler. Updated 1/14/2026 Amazing Sketchfab model by tegnemaskin Fixed for 3d Printing. Added overall .4mm No UV details needed.
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
Renault Twingo Mk1 (First Generation) Cabin Air Filter Frame – Two-Piece Clip Design This is a precise reproduction of the original Renault Twingo 1 interior air filter frame (Copy of OEM: 7701409323). Unlike the original one-piece…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Base to securely hold an Airtag within luggage interior. Foam tape to hold base. Cover plates slide and clip onto the base to hold the Airtag in place - intent is to keep the antenna as close to case exterior as possible. Printed PLA…
Print, edit, modify, etc… I made these for mandos who want stylish interior helmets. They print flat and when heated with a heat gun, can be bent to form around your helmet interior.
Not my files. Reuploaded for my collection Thingiverse thing:5787531 by alfringant
Key Features: Corner -mounted or substrate- buried placement Interior viewing access Fish and shrimp hideout filament: PETG This is an original 3D-printed aquarium rock designed to be placed directly against the glass of your fish tank.…
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. Falls die…
I noticed that there is actually a lot of unused space inside the Original Prusa enclosure, and I can always use more storage space in my small printing room. This shelf mounts behind the printer and adds a substantial amount of storage.…
This is a printable 3d scan of the passenger side interior door handle pull. It is a bolt in replacement for the OEM handle which is very prone to failure. The one pictured was printed in PLA, but I highly recommend ABS, PETG, or ASA for…
"This is the weapon of a Jedi Knight. Not as clumsy or random as a blaster. An elegant weapon, for a more civilized age." I decided to take another stab (pun very much intended) at a lightsaber with interior components. This particular…
I wanted a handle to grab for trunk lid closure that I could grab from any side and angle, so here's my solution. I printed with 45% infill on FFF (on a TAZ 6) and will do a 100% infill SLA print later (Formlabs Form 3). Weak point is the…
hook for gear mounted inside the sleeping roof of the VW california
UPDATE 7.1.25 Added interior model with pockets / hooks for zip ties to fix the light harness UPDATE 8.10.24 I created and added here an interior that is compatible with Trx 2-speed transmission - it has a “box” around it to accommodate…
3003 Fantasy Bits Mega STL Collection on Kickstarter 📢 Earn Money with 3D Printing – Get a Commercial License for My Vase Models! 📢 Do you have a 3D printer and want to start making money? Or maybe you run a shop selling 3D-printed items…
A piece of plastic to hold your cable on the model3 and modelY tesla 2nd generation interrior trim. Check this other design to understand how it works. https://www.printables.com/fr/model/214285-tesla-model-y-center-console-cable-holder…
Designed for simple printing, though I printed with 0.1mm layer height to keep some of the detail. Installation is simple, slide the roof of, drop the print in and close the roof again.
Some supports required Completely remodeled the floor based on nautcasprt6's bronco interior found on Thingiverse with added recessions for seating.
replacement panel clip for interior door panel behind mirror. Toyota Tacoma
A decorative wall art inspired by tractional tiles. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any filament The model…
A set of 12 25mm bases meant to look like the interior of a scifi setting.
Interior door handles for any LHD Nissan s13 240sx with manual windows. If you need for RHD you'll have to mirror the models, left and right are slightly different.
A version of @TokeTokersen's hanging hat rack that fits a standard 1 3/8 inches thick interior door.
Spare interior door key
See screenshot for the printing orientation I used. But do what's best for your printer. This device clamps onto the tape measure for getting accurate measurements of interior spaces like drawers, cabinets and the like. Small tape…
Element Under Desk Drawers I wanted larger deeper drawers under my desk, so I created this set with four interior options. It is just over 70mm deep x 200mm wide x 200mm in length. I used a tolerance of 0.7mm so the operation is smooth.…
I decided to print my clips using classic PLA because it holds very well and I would rather have the clip break than have the door panel damaged if I had to disassemble the door panel again. Print Settings Model orientation: horizontal…
Clips pour maintenir des câbles sur le tableau de bord. Il y a 1 version qui tiens avec du scotch double-face (version DT), et 5 autres avec une épaisseur différente qui se placent dans une jointure. Tous les clips font 5 mm de largeur.…
Remix of 3005083 (see above)- Added fixation behind aluminium cover Better fixation of the hook while the top roof is open Print Settings Printer: Mutirap 420 2 Move Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Multec…
Update 11.03.2023: Spoolholder1 replaced by Spoolholder2 Update 06.03.2023: Base plate V2 left and right with mount for ptfe tube. Works with 8mm rod. So the spool cannot easily slip off the stand and damage the printer. The spool holders…
This is a remix of this pill box. I widened the interior diameter to fit more pills.
Printed on Ender3 v3 KE with normal auto tree support and 100% fill. Tested with some cheap PLA. White clip on image is original part from Citroen. If you want to be sure that the clip holds good, use the strong one.
This model contains only the files that I modified from the separated part remix found here: https://www.printables.com/model/471565-every-part-separated-in-the-suzuki-carry-kei-truck/files For the full model, you will need to print…
🏥 Call Nurse Joy, we have a Poké-medical emergency! This multi-part model was created by MiniWorld3D member ChipsandRamen , allowing you to print parts in full color with a regular setup and assemble later. Pokémon Centers (or PokeCenters…
Did a renovation for an old Clodbuster and used a Blackfoot shell for this. As there is no proper interior available I designed a very simple interior to cover the cables and wiring and give it some more realistic touch. Some parts need…
I made some hospital themed furniture for kids to play with in their dollhouse Note: Some objects on the pictures were already designed. You can find these on their Thingiverse. Wheelchair (scaled down):…
Intorior door handle for Hyundai Coupe/Tiburon/Tuscani GK 2001-2008 Copying the design and printing it was cheaper than buying a new one from dealer, so maybe someone else will have a use for it. For UK and other left hand driving…
Ok this is an expansion for https://www.thingiverse.com/thing:3764187 and contains only some of the parts used to design the ship lay out in the pictures this could be used for a power plant a nuclear submarine or a scifi moon base enjoy…
These are the interiors for the 'Nijverheid' Dutch working class terraced houses I created. Happy printing.
This is the interior found on Southern Railway coaches as rebuilt 1948-1955, in the 1050 to 1080 series. Mostly these cars received a refreshed interior with reclining seats. These cars were used in revenue trains, the Southern steam…
This bracket was originally built for my enclosure it takes three 2x2s and makes excellent right angles out of them the print is surprisingly robust and it makes the outer edge of the wood flush with the bracket.
Interior Door Key This is a printable replacement for interior door passageway keys that use a flat end, like you would find on a bathroom or bedroom. We used an FDM printer and printed this with 8 wall loops and 20% Gyroid infill. Our…
I needed to adjust my door strike plates due to house settling. Instead of filing away the metal ones that were previously installed, I decided to make the file which can be bent to match the door with a heat gun. A DXF file is included…
Warning Tricky, it is a puzzle, but working fine for me. Some parts required more than 18 hours to be printed. Definition None. Printing Not sure this mode could be printed on a Prusa Mini (has been tested on a Mk3S bed). Infill 15%. Use…
⛪ The Temple of Time ⏳ Inspired by The Legend of Zelda: Ocarina of Time , MiniWorld3D artist @dude2k5 created this model of the interior the Temple of Time that fits together with the separate model of the exterior ! Due to the amazing…
If you add a fuse tap to your 2023 Ford Super Duty, the old fuse box cover won't fit. This is a replacement cover with added depth to contain the fuse tap and allow the wiring to enter the fuse box. It may fit older Super Duty models, I'm…
Ironmans Helm im Maßstab 1:1 mit Interior
Edited the model to fit the dust covers i had on my threaded rods
Hope the 4th part was fun for you :) Sidecar Velorex 560 - PART No.4 - Wheel suspension + main body holders od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
Interior Door Pull Handle Black for Volkswagen T2 bay window bus. Replaces part 211-867-161/B (211867161B) First version contains left and right handles with VW emblem. Print with PETG or other heat resistant filament. Work in progress.…
This is used in the event you are installing some accessory that is being hardwired to the cars interior fuse box. This is a remix of the following link:…
No soy experto. Lo he hecho para mi casa con solidworks. Impreso con PLA y soportes
Replacement door handles for First Generation Ford Ranger pickup. Should fit years 1983 1984 1985 1986 1987 1988. Should print in ABS or PETG to prevent melting in the heat.
I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings…
Pequeñas macetas para plantas pequeñas tipo cactus para decorar la oficina o cualquier rincón de la casa. Tiene una altura de 60 mm. Le he añadido una base antideslizante para no rallar superficies delicadas.
just some extra parts for https://www.printables.com/model/808757-modular-lightsaber-with-interior-parts for long casing three just print six of the grips and attach them on their spots
Upon request I have uploaded the interiors of the 'Nijverheid' Dutch working class terraced houses in separate parts.
Door handle interior trim for the R33 Skyline. Modeled off a series 1 GTST.
german version below This is an interior design which kind of matches the outside description of the coach: A4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
https://www.printables.com/de/model/688769-hook-for-vw-california-interior
I wanted the BRDRC filters to fit in the packaging as well. You have to print the empty box and than you can add the inserts. If you want you can also print the original insert.
Interior parts to make a chapel car out of a Bachman G-Scale coach Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: SunLu PLA Category: Vehicles
A unique organic-style dollhouse diorama featuring smooth, flowing walls and a sculptural interior layout.
A simple floor mounted "hidden" barn door guide. Its a rough copy of this part: https://is.gd/xcGRHp ~45mm x 24mm x 4mm Main guide is 20mm tall from the floor Secures with two screws 4 perimeters and 25% infill
Updated files on 6/26/2025 This is the lounge and toilet found on each end of Southern Railway coaches as rebuilt in the mid 1930s, notably the 1500 & 1600 series. See car diagrams from southern.railfan.net for specific car…
Tesla Model 3 Sensorabdeckung Innenraum, damit dir Alarmanlage nicht nervt wenn Fliegen im Fahrgastraum sind. Die Datei wurde mit Bambulab P1P und weißem Bambulab PLA gedruckt. Zum erstellen der STL Datei wurde Autodesk Fusion verwendet.…
I added an Add-a-Fuse tap for a dashcam but couldn't replace the fuse box cover. I also didn't want to cut up the OEM part, so I made a reasonable facsimile and Dremeled out a hole where my tap goes. Sure, you could extrude a hole, too.…
This clip fitted nicely and even better than original metal one, as it is firmer.
Used in 1982-1985 Celica and FJ60 Land Cruiser and many more. If it fits your car let me know and I'll update the description. Printed using ABS. Make sure to use a material that's temperature resistant. Being modelled after something…
I could not find any templates for the old style, non T Loc, systainers, so I measured the foam insert from an old one I have and modeled it in Fusion 360. I broke it up into 4 parts so it would fit onto my print bed. 0.2mm layers, PLA,…
Easily install a lamp inside your car. Fits on the screw socket on the inside of most LGB roofs Update - 2 variants available now: for 25mm and 26mm distance between the screws Fits for a 6.5mm LED (e.g. mXion lamps coming with integrated…
Interior for the famous Marklin metal Donnerbüchse. Made the hole for the light bigger and some minor changes for a better fit.
german version below This is an interior design which kind of matches the outside description of the coach: B4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
These are mounted on all the covers in the rear of the van. I do not advise PLA (hot in the van) , But PETG with a max amount of walls is the way to go. Happy printing and fixing !
We all know the interior Bachmann has in their business car is just horrid. Here is my take on a PRR style interior to replace that. It's based on car 180, that seems to be the closest match to the window pattern Bachmann copied from the…
This plate has a 5mm grid of 2.9mm holes, and two screw holes for the M4 screws that go in the M4-threaded inserts inside the case. The holes should be relatively the right size for just threading M3 screws right into the plastic. I doubt…
I love the cryptex mod by gummybear223 and the original variable USB flash drive cryptex by rwsmith123, but I wanted a simpler interior piece that would (a) print as a single piece rather than two halves and (b) have more interior space.…
Modification of Jake's door hook to make it compatible with 45mm thick doors.
What This is an angled mount for the Philips Hue Interior motion sensor. It includes an screw base which can be turned to the right angle and fixed to the wall. The Sensor mount is connected with its original magnet mount which screws…
As the part is located directly at the heated bed I would recommend printing in PETG like the original part is. Use supports in the screw holes (automatic painting in PrusaSlicer works fine)
1969 And/Or 1970 Cadillac Deville Calais Interior Rear Sail Panel Courtesy Light Lens Replacement Designed, revisioned and printed by me for a client over a year ago, never remembered to upload it. Customer installed it in their vehicle…
