Counting matching models…
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
The one and only truly periodic table of elements. A similar cylindric design might be seen elsewhere, however the periods are always organized as a circle of same height. The increasing Z and periodicity, however, call for a different…
This is a 3D model of the world's first "einstein", an aperiodic monotile. Update: There's a chiral (handed) aperiodic monotile now, see: https://www.printables.com/model/494205-spectre-worlds-first-chrial-aperiodic-monotile You will…
No supports are needed!!! This is the official periodic table of ELEMENTS! All the elements, Hydrogen to Oganesson, all 118, are on the stl. file. This is a great present for a science teacher or someone who loves science! (It was mostly…
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
This is a set of magnet tiles with the elements from the Periodic Table. Every tile has cutout on the back for gluing in a circular magnet. I used 9x2mm magnets. OpenSCAD source file included if you want to customize. Category: Learning
This is a 3D model of the world's first chiral aperiodic monotile. “Chiral” means “handed” -- same as left and right handed screws you can't transform left into right just by turning the object. It's an update to…
This printable periodic table consists of 118 50mmx50mm interlocking pieces. It can be connected with the Lanthanides and Actinides inserted into the transition metals, or a connector can be inserted to make a more horizontally compact…
This is a more compact handle designed specifically for the Elk 2m/70cm log periodic antenna, which I designed to be smaller than the PVC-based handle that it comes with from the manufacturer. This makes it handle a lot more like the…
Aperiodic tile cookie cutter based on the Smith, Myers, Kaplan, and Goodman-Strauss's aperiodic monotile. For information on this tile see https://aperiodical.com/2023/03/an-aperiodic-monotile-exists/ . The cutter was used on ginder bread…
I designed this to bend several diodes at once for some of the mechanical keyboard kits I've been building. This helps keep the bends consistent so they look nice on boards where the components are exposed. It's also helpful being able to…
These cout cutters are perfect for baking lovers who want to bring a pinch of science into their kitchen :) Each cutter represents an element of the periodic table - Ge (Germanium), N (nitrogen), I (Iodine), U (Uranium) and S (Sulfur) -…
My manual Z-axis ( https://www.thingiverse.com/thing:5145644 ) works quite nicely but is overkill for a light-weight laser module. It can be a pain to assemble if the printed fits are particularly tight and requires polished rod and…
Very simple design: this jig allows to bend quickly and repeatedly diodes for the Redox keyboard PCB. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 150µm…
Watch the instagram post about this here: https://www.instagram.com/reel/DFlu37xytdk/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== This is a period pad dispenser! I couldn't find anything out there that suited my style, so I made…
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
A few months ago, I was looking for a 3d model of the periodic table to print and put on my wall. But I couldn't find any, so I decided to make one. By default, the model is sized such that each element (border included), is 1 cm. The…
Aperiodic tiling, folks, is like the 'Jazz' of geometry. It's got some rules but loves to improvise! Picture a floor covered in tiles, but not the kind that make you think, "Oh, I've seen that pattern a million times." No, these tiles are…
For many years, mathematicians have been intrigued by the concept of aperiodic tiling - the idea that shapes can be arranged in such a way as to create infinite patterns that never repeat. However, until recently, it remained unclear…
Note: No AMS/MMU required ! The color changes are done using filament swaps at specific layers, making the print accessible to everyone. A changelog is available at the end of the description to keep you updated on recent additions and…
An aperiodic monotile, sometimes called an "einstein", is a shape that tiles the plane, but never periodically. For more information about this shape, see: website dedicated to this shape video showing the space of related shapes paper…
Periodic table of elements - PL I recommend buying self-adhesive magnets. Dimensions 20mm wide, 2mm high and stick in the middle. Then you can hang the school layout on the blackboard. Board size 120 x 90cm Dimension. Element 1 piece…
These are two cookie cutters based on the aperiodic monotile ("one stone") shapes discovered by David Smith as described here: https://www.nytimes.com/2023/03/28/science/mathematics-tiling-einstein.html Flip some of your cookies for the…
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
Vase - Kangxi period (1662-1722) Fixed lack of bottom -and lack of hole at top. Mangled mesh from p-gam. hollowed. Added UV details.
Also check out my classroom collection here: Classroom Collection by FabTech | Printables.com Note, It was pointed out that I was originally missing Gold. I have a couple more that are also missing. Missing elements were: Technetium(43),…
This is a decorated version of the Hat aperiodic monotile. It includes three “pipes” joining the √3 sides of that tile. The result is quite mesmerizing, with an aesthetic reminiscent of the Tantrix/Palago-style puzzles and the Celtic…
UPDATE updated 2024-May-09 with ‘Extras’ which includes ‘a title peice’ tiles for ‘period’ and ‘group’ 'key' for explaining the different aspects of each element ‘corner guide’ for the packing board, ‘hangers’ for hanging the finished…
I printed this piece in Yellow TPU. Should look great in Black or Red too. It is the only Filament available at my disposal currently. :) Should work fine with any other filament.
combination of the origiinal diode bender and the lead bending jig :-) If you like my work and would like to support me, please consider donating to my tinkerfund - http://paypal.me/sabitech2k
This is a cheap and easy way to experiment with the new family of aperiodic monotiles discovered by: David Smith , Joseph Samuel Myers , Craig S. Kaplan and Chaim Goodman-Strauss . You can find more info here:…
This is maths, it's a tile, and now it's a toy :) You can tile the plane with it. With no gaps. Any way you tile it, you can never find a repeating pattern that continues paving the plane. About 50 years after the Penrose tiling's…
Horses for 1:72 wargaming with and without barding for antiquity and medieval periods. Category: Games
Periodic table of elements /with cover/. can be used as a teaching aid or suitable as a home chemistry practice Model made in OpenSCAD. Down there is an option to download editable files directly for OpenScad (= .scad)
Mathematical! Can be printed without infill since TPMS structures are generally self-supporting. I used two walls and two top/bottom layers and it came out great. Just print it slowly for the best results, especially the first layer for…
General information This is the periodic table measuring 1080 mm by 540 mm. The names of the elements are in Bulgarian but can be changed depending on your wish. You could also add other information on the cube such as atomic mass. The…
Ok here is my version of @ThothLoki rotary axis for my eleksmaker a3 diode laser. Mine is designed for a nema 17 and replaces either the x or y axis on your laser. I use t2 laser to convert the lateral movement into rotational movement.…
adds a air assist to a 40 mm diode laser engraver. should give you slightly better cutting performance by clearing ash from the cut and increase the life span of your laser diode by blowing the smoke away from the lens. tested on my…
You may need to scale it down to fit your hands, I probably printed mine too big I printed with fdm at 0.2 mm layers i think
Diese ist ein Halter um einen Kreuzlaser mit einem Durchmesser von 12mm an einem Cloudray Laserkopf aus der K Serie zu Montieren. Die idee stammt von raptor_demon ich habe es aber neu gezeichnet und die Masse angepasst an Cloudray.…
I made keyrings/pendants/labels from periodic table (chemical table). Each element has symbol, name, atomic mass and number. Note 1: models designed for resin printers, for FDM it would to small (need resize). Note 2: some models has too…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
A parametrized version of the newly discovered Spectre, an Aperiodic Chiral Monotile. See: https://cs.uwaterloo.ca/~csk/spectre/ for more details about this shape. This version includes the OpenScad file, so you can modify the “polygon…
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Introduction The base of this project is an OpenSCAD script that can be used to make single tiles or a text or a name of the Elements of the Periodic Table. The script has many options. All the 118 elements can be created with a batch…
This is a model to attach an air assist to a NeJe laser module that I have on my Eleksmaker laser form banggood. It is printed in PLA with the tube on its side. The main body attached via the four screws on the top of the laser module,…
I created this model in OpenSCAD and then applied the callsign text in Bambu Slicer. I've included an example STL with my callsign, KQ4VYY. To print this model, I use a Bambu P1P with AMS for dual colors and a 0.2mm nozzle, but this could…
Inexpensive diode laser cutter engravers rarely come with a enclosure. This can be a safety hazard for your eyes. This is a simple trick that costs pennies and reduces the risk substantially. It also helps with laser focus and directing…
You will need to set the three different color layers appropriately in the slicer. No supports required. Really like this sign? You can get a Periodic Table “Shenanigans” T-shirt in my Etsy shop at: www.fallingentropy.etsy.com Just go to…
This model is a “from the ground up” recreation of the Einstein aperiodic tessellation. I built this using a series of construction lines to form a set of “allowed vertices” and then “walked” from point-to-point by specifying the angle…
Neatly park your RX and Cap between two standoffs.
60 mm square “refrigerator” magnets of the elements, designed to be used with two 6mm X 2mm magnets, though magnetic tape strips, double stick tape, and removable adhesive strips will work well enough. Works best if printed in two colors.…
Created with OnShape: https://cad.onshape.com/documents/69f25f92cf286322e3ede378/w/64538863a6b45e4f25785fab/e/9af81d9c43e683c16ab986c1
The speaker/mic rubber port cover of my Radioddity GD-77 crumbled to pieces, so I designed from scratch this replacement port cover. I recommend printing it in TPU, with no supports. If you have a rough textured PEI bed sheet, the look of…
Pernas 150 mm mais longas para o laser de diodo Two Trees TTS-55, facilitando a gravação e o corte de objetos mais altos e em leitos de favo de mel. Substitui as pernas originais. você pode adicionar almofadas antiderrapantes sob as…
ABOUT THIS MODEL: 2022 Subaru BRZ Fog Light Brackets for Diode Dynamics SS2 SAE Fog Lights After 2 months of development and 5 revisions of this design, I now have the “final” revision printed and mounted on my 2022 Subaru BRZ (as of this…
Loudspeaker enclosure with aperiodic (resistive) vent to avoid harmful resonance of insufficient air volume. Inner surface consists of two types of quadric surfaces (parabola and ellipse) that share common locus. Aperiodic vent can be…
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
Fridge magnets for each of the elements of the periodic table! Designed for 8mm magnets. Fusion 360 file is included for any desired customization (note, you will need the ParametricText add-in ). Recommended to use a “Height Range…
Little two-part tool for bending the leads of resistors/diodes/other axial components. Fits 20 components at once. Default lead spacing is 10mm, Fusion file can be easily adjusted to other spacings.
All 118 elements with their atomic number and chemical symbols.
This is a Spectre. It is an aperiodic monotile, or "Einstein": A shape that tiles the plane, but only nonperiodically. More specifically, it tiles the plane nonperiodically without using a mix of normal and mirror image shapes . Spectres…
Cylindrical periodic table with 118 elements divided into s, p, d, and f blocks. height: 210 mm diameter: 133.78 mm I differentiated by color diferent blocks: s elements: blue p elements: orange d elements: brown f elements: white noble…
Since all of the storing solutions that I've found required too much filament for this simple task, I've decided to design my own. One card can be printed with less than 7 grams of filament and can hold 3 “sheets” of resistors (3x20=60…
This peat pellet holder is easy to print, and utilizes a slab modifier to create a honeycombed pattern throughout the unit. Printed using PLA “biodegradable" filament (https://www.amazon.com/dp/B0853468ZF) with 10% honeycomb fill density…
The periodic table presented in circular form. In this representation the lanthanide series and actinide series are accurately located within the table, and larger atoms are represented as increasingly further away from the center. Also…
PLEASE READ FULLY BEFORE PRINTING: Fully 3D printable model of the periodic table. Uses around 250g of filament. No AMS/MMU necessary, but 1 manual filament change is recommended for the elements to create a contrasting text colour.…
Every Element as a fridge Magnet Make sure to put in a filament change point. This is the magnet I use.…
I'm surprised nobody's done anything like this yet. It's a nice pattern. The base vector was pilfered from https://cs.uwaterloo.ca/~csk/hat/app.html if you want to have fun with it yourself. I've also included the uncropped inner…
Introduction: Don't worry about the after party with these New Year's 2024 party glasses. They are made using 100% PHA that is known to biodegradable and compost better PLA which needs specific industrial compost conditions to be met in…
In March 2023 finally the first “Einstein” was discovered! As a big fan of the Penrose Tiles, especially P2 (kites and darts), i read an article on derStandard (german) today and i just needed to make this happen. In this article i found…
Features - Complete collection from Actinium (Ac) to Zirconium (Zr) - Consistent size - Clear element symbols and atomic numbers and standard atomic weight - Perfect for science education and chemistry-themed events Technical Details -…
This is the turtle variation of the aperiodic monotiles found by David Smith, Joseph Samuel Myers, Craig S. Kaplan and Chaim Goodman-Strauss announced in March 2023 . An aperiodic monotile, sometimes called an “einstein,” is a shape that…
A small box for the resistors and diodes of the arduino starter kit. One variant with values and one without.
If you build this so it can also do vertical engraving, you might want to also make the self centering turntable to engrave cylindrical objects. https://www.printables.com/model/163956-self-centering-turntable-for-use-with-vertical-las…
A nice science decoration for your room! Category: Decor
A set of recursive OpenScad scripts to generate some aperiodic tilings of the plane: Ammann-Beenker , Armchair , Chair , Domino , Golden Triangle , Half-Hex , House , Penrose , Pentomino , Pinwheel , and TriHex . The STL and GCODE files…
Holder for 2 pieces of LR41 batteries, which serve as a power source for the diode. Useful for lighting the interior of objects, such as in the picture attached. Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament:…
3D model of periodic table with displayed melting points of each element. Higher=Higher melting point Original model authors: https://sites.google.com/ies-sabadell.cat/homelab/%C4%8Desky
includes his swords and hair i printed it in resin but it also works with a 0.2 mm nozzle
Did anyone ever tell you that you could print multiple elements? Well now with this table you can. I did not add the atomic numbers as that might confuse all the ATOMS because then they try to combine and add up. I also only added the…
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
This is a remix of the model found here: https://www.printables.com/model/250689-elk-log-periodic-antenna-handle The only change is adding fillets to high stress areas (right angles) to increase strength. I especially noticed fatigue…
A periodic table-themed desk organizer capable of storing all the elements of your desk. (Yes, I know that Iodine doesn't really work for the “L” in Printables. It was the best I could do!)
Quick & dirty simple diode jig for 8mm holes. Accepts 10 diodes at a time. Insert diodes into holes, bend by hand. Fold diodes flat and cut to remove tape. Originally designed for building the split keyboard ErgoDonk Zero .
Fiodor Mikhaïlovitch Dostoïevski – Buste Description (Français) Ce buste représente Fiodor Mikhaïlovitch Dostoïevski, écrivain et penseur majeur de la littérature russe du XIXᵉ siècle, dont l’œuvre a profondément marqué la philosophie, la…
Clips to make Ikea Dioder LED bars clip nicely into an Ikea Detolf case. Print instructions Print six of the light bar clips to attach the Dioder Bars to the Detolf rails. Print a bunch of the wire clips to keep the Dioder wires tidy.…
An adapter kit for Diode Dynamics Stage Series 3" Standard LED Pod to adapt it for Toyota fog light longer screws are needed Category: Automotive
As described in Smith, D., Myers, J. S., Kaplan, C. S., & Goodman-Strauss, C. (2023). An aperiodic monotile. arXiv preprint arXiv:2303.10798 . Unlike some other models that are derived from Craig Kaplan's interactive tiling toy , the…
Druckeinstellungen PLA Füllung 20% Schichthöhe 0,3mm Rand: “Diode_Boden-Stifte” und “Diode_oben” Stützen: “Diode_oben”
This is a little different than other monotile uploads here. I've taken the extra step to produce multiple aspect ratios for the right-angle edges. So you can have a different monotile set than everybody else ;) My favorite is the Phi…
A cookie or clay cutter in the shape of the aperiodic monotile einstein shape, published by Smith and friends in March 2023. Smith, D., Myers, J. S., Kaplan, C. S., & Goodman-Strauss, C. (2023). An aperiodic monotile. arXiv preprint…
Smith, Myers, Kaplan, and Goodman-Strauss's aperiodic monotile, the Hat, smooth on one side and with Dan Piker's Truchet-like markings on the other side in relief. As discovered in March 2023, this single shape tiles the plane but only…
This is a flip panel periodic table. It’s perfect for memorizing the elements or challenging your friends with quizzes while making learning fun. No additional support is needed; it’s print-in-place, ready to use right off the printer.
The Demon Sword Lostvayne of Meliodas for Dummy 13 / Action Figures Prints in separate parts. NO AMS NO SUPPORTS Glue is recommended. Scaled to a standard D13 Model (100%). Check out my profile for more Dummy 13 weapons and accessories.…
On March 20, 2023, a group of computer scientists (David Smith, Joseph Samuel Myers, Craig Kaplan and Chaim Goodman-Strauss) revealed their discovery of the holy grail of tiles. A simple 13-sided shape, nicknamed the "hat polykite", is…
A holder for the Philips Hue dimmer into a Feller EDIZIOdue cover. The holder is split in two pieces, being the same dimension as the original Feller switches. For an assembly you need: Feller EDIZIOdue cover piece with two empty places…
This is a follow up by David Smith , Joseph Samuel Myers , Craig S. Kaplan , Chaim Goodman-Strauss of their discovery of an aperiodic monotile two months ago. Yesterday (may 29, 2023) they announced they now have found a family of tiles…
Update: Added options for marking top and/or bottom of tiles with Truchet-tile like arcs. A jigsaw puzzle made of these mono tiles could be really insane. Turn filament scraps into colorful tiles to make interesting designs! This tile is…
Surprise in 70x70mm! Print in PLA with filament change when the background stops. Inspired by https://www.printables.com/model/1243241-element-of-surprise-sign but redesigned to be a bit smaller.
![Aperiodic Monotile polykite "The Hat" Einstein - [multiple aspect ratios include Phi]](https://media.printables.com/media/prints/435459/images/3603903_5a1307db-843e-4e5d-8c95-e8c60ae24096/phi.jpg)
