Counting matching models…
Monotonic infill & ironing test Testfile for the new features of Prusaslicer 2.3.0 alpha 1 https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.0-alpha1 Print instructions gcode 1: monotonic infill test gcode 2: monotonic…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…
Remixed to have premade settings for prusaslicer. Just import, slice and print.
This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.
Ironing Flow Test model for testing 10% thru 60% flow in 10% steps
Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…
Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.
Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer
These models are designed to test ironing flow and speed. They are optimized for 0.2mm and 0.16 layer heights. Models test the flow rates of 10%, 15% or 20% through the speeds of 10-40mm/s. The sliced files are for a Bambu X1C. Just load…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
This is a recreation of the simple ironing test square by VladSalad at Thingverse. It's just a simple 50mm X 50mm X 1.6mm flat cube, I recreated it in FreeCAD and exported the STL so it's not the same file, but it is the same part. It…
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…
UPDATE: 06.03.2026~ I have uploaded .3mf files saved in Orca Slicer and Prusa Slicer separately as it seems not every one of them is compatible when opening the .3mf saved in different slicer. Hope this will help ya guys. UPDATE:…
Thank you very much for downloading, hopefully I've been able to help you guys some in your journey. I have made the ironing test v2 to include 10-100mm/sec and 10-100% flow rate. V1 is still available for download and follows the…
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
Ironing test with guide + connected.
FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…
Ironing Test Model I developed this little calibration tool to test my ironing settings. BENEFITS: Fast to print Calibration tool
Guide - How to perfect your Ironing on PrusaSlicer This is my own Guide of the Ironing Test by NuggetsINC on MakerWorld, but ready for Prusa Slicer 2.9.4 A very simple and detailed guide to test and understand how different ironing…
A single hanger with dual hooks to hang the ironing board from.
Replacement iron-on beads with 10 mm diameter. These do not need much filament and are great to print the very last bit of a spool. Tip: In Cura set “Print Sequence” to “One at a Time” and print til there is no filament left.
This tests ironing flow rates, 5%-25%, this was created with Orca Slicer 2.3.2 Feel free to change settings to your liking
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Check if every single part have different ironing settings in slicer. Use brim to get everything attached. In X axis you have different speeds In Y axis you have different flow rate Check which one looks the best :) Edit: values are not…
This model includes axis labels for speed (mm/s) and flow rate (%) to the original model. The grid layout was also switched to align with the conventional x-y axes on a graph. Note that the axes add about 30 minutes to the print, but the…
Quick & Simple Ironing Test Square to really hone in those settings!
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
The diameter of the board leg is 19 millimeters, so the shelf is 20 millimeters wide. The angle of inclination of the legs relative to each other is 66 degrees.
I made ironing test and ironing flow adjustment models, a single plate contains round hole test, flat slope ironing test, and curved slope ironing test, depending on settings,a single plate should take 2 - 3g of filament, a single plate…
Leifheit ironing board cable clip (spare part) After the original clip broke off, I decided to construct a new, better one. Printed with PLA. layer height: 0.2mm infill: 40% For wire diameter: 2,8mm “clip_v2” is normal orientation…
Get your ironing board off the floor - perhaps on the back of a closet door as I did with this approach. I looked at the various brackets others shared but thought I would like something a little different. Some others depend a bit more…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…
I wanted to share the GCODE for the two cubes I printed as an example of the new ironing feature coming to PrusaSlicer 2.30. These are both the same model one is sliced with Ironing turned on, the other without. Print them both and enjoy…
All you have to do is insert the filament you are using et Voila ! testing speed and extrusion for ironing
Quick Practical print to hold the ironing board against the wall to stop it jumping on me in the dark. shared the model to keep these attackers at bay.
Description: This ironing calibration test is designed specifically for the Creality Ender 3 KE to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a…
Adding ironing to the top of models is a great way to give a better appearance. But what's the best spacing for ironing? Is the default 0.1mm optimized or can the same results be achieved faster with more spacing? At what point does…
The 5x5 grid consists of 25 individual parts (10 mm radius, 5 mm pitch). The platform can be deleted and replaced with a custom part (this platform has 1.6 mm thickness). This version is configured for Prusament PLA+ using a standard…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Foot for Ironing board fits 20x30mm pipes. Designed as replacement part for Kärcher Bügelbrett. print settings: Best printed on the large flat side. Depending on tolerances and the ironing board the fight mit bit really tight. Scaling it…
Wall hanger for an ironing board with curved legs. Use four 6mmx50mm half round head screws. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 4 Top layers: 4 layers Bottom layers: 4 layers Infill: 25% Supports: no (if you…
This is a remix of one from https://www.thingiverse.com/thing:4232886 I was asked to make one with pinholes in it. Category: DIY
A Christmas tree tag that is simple to print and takes minimal filament Perfect for use on Gift bags, Presents, and more! We recommend using 70-100% infill at 110mm/min
Description: This ironing calibration test is designed specifically for the Creality K1 to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full…
If you bought a IKEA Ruter Ironing board you are probably wondering where the heck you should put it. I live in a small house, therefore floor space is gold, which prompted me to make this super simple wall hanger for the Ruter board. I…
Wanted to create an ironing test that could be utilized beyond just the test itself to avoid being left with plastic scraps when done. This test print can double as a large drink coaster or keep it to use as a reference for your selected…
Replacement clip for the IKEA DÄNKA ironing board, as the original snapped. Designed and printed within 1 hour!
Holder for the rods on the ironing board. Link to the post .
This is a 3D Print designed to test your ironing settings. :)
EN: Just a simple Hook. I used it form my Ironing board. Space between Wall and inner wall of hook is 35mm DE: Nur ein einfacher Haken für mein Bügelbrett. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,22mm Infill:…
Story: I bought a AquaPur ironing desk which occur to have plastic slippery foots on it, that would cause the board to bend quite bad during ironing. I got my first spool of TPU at that time so I decided to copy that foot and get my board…
just for hang on a wall ;)
A foot of my mothers ironing board wore up so I designed a new one. The size of the strut going in the foot is ca. 20mm x 30mm The angle to the floor is 55° F3D file is attached as well.
Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…
A clip that holds the ironing board folded. It is a replica of the original from IKEA DÄNKA ironing table.
A simple wall hook for hanging your ironing board on the wall. The diameter of the leg of my board is 35mm.
Semi oval shape protective feet for e.g. ironing board. Pipe dimention ~18.3 mm . Angled wall so it catch it good. Big stand area but also big angled stand area (wider). I have printed in draft mode for speed. Change to more precise if…
Introducing the Better Danka Clip, a durable replacement for the Ikea Danka Ironing Board's leg clip. Designed for a firmer hold and increased stability, this clip ensures your ironing board stays securely folded. Easy to install and 3D…
It can hold 300 ml (10 oz) of water. Height 95 mm. To be printed in vase mode. I used 0.6 mm nozzle and 0.7 mm extrusion width. Tried only with cheap PETG and it is much more sturdy than expected. I made one larger version, but then it…
Replacement Ironing Board Leg Cap -If it does not fit, just resize the object. Category: Replacement Parts
I bought the TS100/TS101 soldering iron heating bit from Aliexpress and wanted to put it in FrostyTheClownMan's case. So I made this holder to replace the slimmer soldering bit. It has a 5x1mm magnet inside that sticks to the original…
Ged rid of any fly at any time , with minimum force and maximum agression ;) If done like this this thing almost never breaks: - use PLA basic! - use ironing at the fornt (included in default print profile) As always completly open source…
Ive always struggled with tuning my ironing flow. when i do a ironing test print, it looks perfect, but when i print out something else, my ironing looks rubish. this design replicates almost all situations where ironing would expect to…
The crush ribs mean if the end is not that round or your printer is out of tolerance it won't matter too much. I printed it in PLA, other hard plastics would work fine. No supports were needed on my prusa mini.
SPLIT THE MODEL INTO OBJECTS FIRST they are all together for simplicity split them and copy/paste the ones you want in a 3/6/9 or even 12 or 16 square configuration. edit each object to have different flow rates or top flow or iron speed…
A Wall-mounted Clothes Hanger to put your ironed clothes before putting them back in the closet (or just leave em there, I'm not your mom). I've used this mount for about 3 months now, and I've probably put more wash on it than it should…
Store your (small) ironing board on your closet rod!
Slider of Vileda ironing board. Board repaired- wife satisfied ;) . Printed from PET-G.
While perhaps not the most glamourous model on Thingiverse these replacement feet for my ironing board took the wobble out of my cheap ironing board. I've tested these on two generic ironing boards from Walmart and they press fit (29.8mm…
Differences of the remix compared to the original Made the text as a negative volume part in prusalicer so it can be modified in the slicer. This calibration test is designed to find the ideal ironing settings for achieving a smooth top…
End Plug for Ironing Board Leg for 23 mm leg I printed it with PETG.
this cap to replace broken/lot caps of an ironing board. cross section/dimension of metal frame is 20x30 (more exact 19,5x29,5mm²) i suggest any type of contact glue if it's not a snug fit.
Inspired by similar models that didn't fit my ironing board, I redesign a new clip with Fusion 360 Printed in Prusament PETG Urban Grey with 0.2mm layer height and standard PrusaSlicer parameters Installed, it fits perfectly. So now my…
Printed with PLA Layer height: 0.2mm Infill: 30% Supports: Yes
It's time to hang your ironing board up in that cupboard. Print a left and right and glue them together. You'll need two assemblies. 0.4 nozzle and PETG
My father in law asked me to print out replacement feet for an ironing board ordered from Amazon that came with 2 of the protective feet missing. They had tried to return the ironing board when it first arrived with one foot missing but…
Replacement foot for 20x30mm irnonboard leg with 3.5mm radius. Resizeable or editable with included fusion 360 file. Print suggestion: PETG 0.2 layer, 3xPerimeter, 60% infill. Place upright on the plate with auto supports or upside down…
This is a simple tapered replacement feet for a generic ironing board that uses 16mm tubes as the feet. Print with the wider part on the plate, no supports needed, print in TPU for a nice and snug fit.
Ran out of that one specific color for your pixel art project? Or do you want to create beads in colors that don't exist in stores (like Silk Gold or Glow-in-the-Dark)? This parametric generator allows you to print a precision batch of…
Replacement foot cap for ironing board. Printed in TPU. Category: Replacement Parts
Fusion 360. Worked for years. PLA was fine but Petg for strength
Maximize the functionality of your space with our innovative Door Mount for Ironing Boards. This sleek, white mount is designed to fit seamlessly over any standard door, offering a sturdy and reliable hook for your ironing board. The…
Ironing board replacement feet to protect floors from scratches (fits ~1 inch steel tube legs). Prints OK at 0.3mm. Slight scale adjustment may be needed depending on the tolerances with respect to a particular ironing board.
Inspired by the classic ironing board foot, this design is a perfect replica in form and function. Print it out and breathe new life into your trusty ironing companion.
Here are some ironing board rubber/TPU feet. Filament - TPU Supports - NO Brim - NO Rafts - NO Infill - 100% (not required) 0.2mm Layer Height
Original clamp was weak and only with two screws. This fix has been working for several years now. Inner diameter is 19.5 mm or scale accordingly. Print with maximum perimeters or 100% infill.
The 5x5 grid consists of 25 individual parts (10 mm radius, 5 mm pitch). The platform can be deleted and replaced with a custom part (this platform has 1.6 mm thickness). This version is configured for Prusament PLA+ using a standard…
ganci per appendere asse da stiro Polti Vaporella Essential Hooks for hanging ironing board
Use standard drywall anchors/screws for wall-mounting.
printing without supports works well. PETG white, 25% infill.
## Ironing Test Square (40 × 40 × 3 mm) A small, solid square for tuning ironing so top surfaces come out smooth instead of lined, gappy, or blobbed. Size is large enough to see stripes and edge buildup, small enough that a test print is…
I couldn't find a rounded off square for older ironing board feet, so I created one in Fusion 360. Print in TPU for more of a secure foot that won't move around when ironing. No supports needed and fill % shouldn't really matter. I…
![Holder for the rods on ironing board [Držák na nohy žehlícího prkna]](https://media.printables.com/media/prints/243051/images/2193443_e6d4406e-cee5-4015-941e-fab92804dc77/39_9.jpg)
![Printable Ironing Beads [Generator]](https://media.printables.com/media/prints/385c2996-c351-46a9-a3be-3fb816d6c289/images/14061778_987d0500-d7ca-45ff-a16d-6f75e49ab0a4_35e8c131-8f7f-4504-9cc9-1e040c98673d/01.jpg)
