2,650 models
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Easy to use - Version 2.0 Better readable
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
The must have tool for your workbench !!! Only 3,52 gram's !!!
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Perfect for drawing lines at the right distance
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
Reduce mess and waste when grinding and tamping. Compatible with 54mm portafilter. Clearing for tamper. Prints with minimum organic support
Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
Print approx. €4.22–€5.16 excl. taxPreliminary estimate for one variant
It ist for outdoor use and I will print it in ASA with 50 % infill outer diameter: 40mm inner diameter: 8mm high: 20mm fase: 45°
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
Print approx. €12.57–€15.36 excl. taxPreliminary estimate for one variant
I've provided files for the MINI, MK3S and MK4 along with 3MF and STL files
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
PSA: Displacement Depth Map Comparisons. I was trying to produce a plaque of Shin Hati From Ahsoka using both a Shin Hati and Bas-Relief Lora in SDXL 1.0 - and this was one of the miss-takes. For those interested in creating Hi Detail…
Print approx. €12.20–€14.92 excl. taxPreliminary estimate for one variant
A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass…
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
A cool looking Raspberry Pi 3B case inside Home Assistant logo :) The model uses 2 colors yet it designed to be printable on a single nozzle printer thanks to Z hop feature. The model has a GoPro mount which allows mounting the case on…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
I wanted to screw some things to the prusa MK3S+ aluminium extrusions, but I didn't want to take the printer apart and realign/calibrate it. So I took a standard t-nut design and modified it in a way that you can insert it through the 8mm…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
On the slider of the ruler, a distance up to 18cm can be set in millimeter steps. After fixing the distance by means of the rotary knob, the distance can be marked repeatedly on a workpiece edge. The ruler is very useful for marking drill…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
Der originale Filament-Halter für den Prusa MK3/4 ist so breit, dass verschiedene Spulen Platz haben. Schmale Spulen, wie die 1kg-Spule von Prusa, taumeln auf dem Halter. Dies führt bei vollen Spulen oft zum Abspringen des Filaments.…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This mount uses magnets to hold the Voice unit in place. Press the magnets into the 4 posts on the printed model. I recommend using a right-angle USB-C cable to connect your power source. Requires: 4x 4x2mm magnets 4x *ferrous/magnetic*…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
This model slides onto the edge of character boards for the for the board game “Sleeping Gods: Distant Skies” to track health. This model avoids the problem of bumping the wooden health tracker that normally sits on the board. No supports…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
Home Assistant Yellow stand for mounting device vertically, Printed on a Prusa Mini+ using Paramount3D PETG filament, but any filament is fine. Normal settings at 0.2 layer height.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
I like fountain pens. My current favorite is the Lamy Vista Fountain Pen . The one drawback is that I write in two colors – blue (or black) and red. But the pens only come with a black finial (the end part of the cap). So I…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Human distal femur with fracure, AO classifiacation 33A3.3 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €10.98–€13.42 excl. taxPreliminary estimate for one variant
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Pistachio/Peanut Bowl 3x hole
Print approx. €5.04–€6.17 excl. taxPreliminary estimate for one variant
Soporte para destornilladores de electricistas que se colocan en las estanterias de ikea skadis
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for one variant
Human distal femur. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
The storage box with an openable sliding lid is for the Makita LD030P laser distance meter; it has a lower compartment for the batteries.
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
If you are venturing down the Home Assistant local voice control rabbit hole, I wish you good luck. My hope is that this model may save a little time if you want to throw all components into simple housing. There are two versions. v3:…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for one variant
Der Original-Distanzring überlebte nicht einmal den 1. Einsatz des Schirmes und zerbrach. Mein Ersatzteil aus PETG ist seit nunmehr einem Jahr im Einsatz. Außendurchmesser Ständerrohr: 53mm Innendurchmesser Ständerrohr: 50,5mm Durchmesser…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
Thoughts: I initially started this project with a different thought process. I took the PS2 controller and started to remodel it to get a nice match. I also started to design different grip shapes. The problem?.. : The system would only…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Ce système est composé de plusieurs pièces articulées afin de permettre de compenser la tenue du crayon et d'assister les mouvements du bras lors du dessin. Il a été réfléchi pour un jeune adolescent en situation de handicap moteur…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Description: A rather simple and fast printed guide rail to rehinge/hang in doors back into their place. This door hinges seem to be a rather “oldschool” design concept, although around here they are still broadly used in all shapes and…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
English I designed the project with OpensCAD to allow everyone to customize the result and make it perfect for their needs. In the "Parameters" window you can decide each variable. Italian Ho disegnato il progetto con OpensCAD per…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Movistar Riders Logo and Keychain You can print multi color keychain with a single nozzle (use this video for reference) or using multiple extruders, palette, etc. I also add a design for dual color logo and keychain, just use Cura's…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Zur Verwendung mit meinen Teleskopringen: https://www.printables.com/de/model/503157-teleskopring-tube-ring-for-telescope-120mm https://www.printables.com/de/model/512679-teleskopring-telescope-tube-ring-200mm Bringt die Ringe auf einen…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Since the temperature in my garage does not allow for 3D printing in very cold conditions, I built a polycarbonate enclosure. This enclosure allows me to store my Prusa MK3 (protected from dust) and to carry out prints in a warm…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Just a little adapter Ring for mounting your Umikot 54mm on top of Simbungu's single dose hopper. Supposed to be glued to the Single Dose Hopper with Cyanoacrylate. Have Fun!
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Die Distanzplatte erweitert die Klebefläche für das Nuki Schloss damit es einen besseren Halt an der Türe hat
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Distanzhalter für Pflanzkorbhalter auf dem Balkon
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Way back when I first got into video, I bought a mid-range ENG tripod from B&H during a sale. The tripod was a Davis & Sanford Provista 7518 with FM18 head (#DAPVT75) and B&H bundled it with a free Davis & Sanford W3 dolly (#DAD3) for…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…
Print approx. €13.01–€15.90 excl. taxPreliminary estimate for one variant
Distanziale per sensore di temperatura SwitchBot. Permette il montaggio a parete tramite un unico foro centrale, posizionando il dispositivo a cinquanta millimetri di distanza dalla superficie per evitare interferenze termiche nella…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
if someone ever needs this: it's a simple spacer for the grip of a TWAudio Speaker.. →print it with high 99% - 100% infill settings (and use it solely on your own risk :-)
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This is a digital 3D printable model of Hazel’s Distaff from the South of Midnight. Perfect for cosplay, themed photoshoots, or displaying a magical artifact from the beautiful video game! 🌿 📦 Included Files - Distaff and 2 versions of…
Print approx. €65.56–€80.13 excl. taxPreliminary estimate for one variant
This thing spirals long distances like nobody's business and flies with ghost-like movement! I have made a major update… a TWISTY update if you will ! 🌀 Please, check out the video above. Every throw is around 50 to 60 yards plus! ↪…
I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Edit: Variations added due to comments and…
Easy to use 2 mm increments Demo by きよさん:
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…
Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…
Pistachio bowl to separate shells Print settings 0,2mm layer 3 walls 25% infill no supports
Hi, this toy is tiny (19 x 32 x 3 (3.5) mm) and has a 3.5 mm hole on one side so that you can add it to your keychain. The switch in the middle has two positions, when you push the switch in upwards it snaps into its new position. If you…
This is another pistachio bowl I designed because none of the available models matched my aesthetic preferences or functional requirements. I can also be used for other nuts and snacks where you need space for any waste. I aimed for a…
Travel back to the siege warfare era with the Toothpick Pocket Ballista. This miniature mechanical marvel takes inspiration from the powerful weapon of ancient times, perfectly sized to fit in your pocket. Ideal for history enthusiasts,…
Living in an area with frequent winds (and while my previous hook designs were well-received) I realized I needed a version with significantly more mass and a deeper profile to keep shovels, rakes, and heavy brooms pinned safely against…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
The Pistachio Cracker is an innovative tool designed to effortlessly remove pistachio shells without damaging your nails. This handy device is compact and user-friendly, featuring a sleek, ergonomic design that fits comfortably in your…
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE 27th February 2022-…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
Bring one of the world’s most recognizable landmarks to your 3D printer with this Hagia Sophia Mosque (Ayasofya) model. Inspired by the historic beauty of Hagia Sophia in Istanbul, this 3D printable design is made for architecture lovers,…
Summary This bistable switch is an example of a compliant mechanism with a four-bar mechanism pseudo-rigid-body model. A contact force is created by causing the contacts to connect before the second stable equilibrium position is reached.…
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
A pistachio bowl to sort the shells
As suggested from the audience, it seems what i made remix of some remix of THIS GREAT Model ! So take a look there too - maybe you'll find something more suitable there!!)) But please note that I did not steal that model. As a prototype,…
Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
I remodeled and made some changes to an existing design for an UppaBaby Vista stroller cup holder. I provide 3d files with the design as well as the stl for both part: the cup holder and the clip. please note that I didn't had the chance…
I tried a few bowls, and decided to design my own. This one needs no supports. I printed this model in the pictures with PLA Linden (Prusament wood PLA) and the "fuzzy-skin" effect My print settings (bowl from image): Layer height: 0.20…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
Hi John, Thanks for the file. I've spruced it up as best I could. I'm thinking now I wished I took some more off the neck as I'm not so sure its going to be that easy to get on your head. Will need the dremel to take it back a bit. Let me…
This ballista / Crossbow is really Fun! Simply insert the arrow and pull back until you hear it click into place, then when ready to fire squeeze the back prongs and watch it fire! I have gotten it to shoot as far as ~7m This print does…
Advanced users of the Breville Barista Express espresso machine likely don't fill up the stock bean hopper, but instead only grind enough (carefully weighed) beans for a single espresso shot. The stock hopper has an issue that beans fall…
* Inspired by this model . UPDATE-20 April, 2025 Version 2 released Changes The rims of the bowls will now always be flush with each other. What version to print? Are you going to coat your bowls with a food safe resin? No. Print v2-No…
Please don't forget to like - I want my Prusameters! 😄 ###################################### I love good tools, but got a little bit mad with using my nice caliper for calibrating e-steps / rotation distance, because I got inconsistent…
This is a 3D printed keychain design of a Prusa Filly assistant. It is a miniaturized version of the popular paper clip character present in PrusaSlicer. This keychain is made to be attached to your keys or bags, serving as a cute…
This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…
🐻 Pistachio Bowl with Built-In Filter & Lid 🐻 A two-part pistachio bowl with easy-lock threads, a built-in honeycomb filter for debris, and an included lid for storage. Key Features: Two-Part Design: The bowl consists of two pieces that…
HISTORY: During the Byzantine period the Emperor Justinian had a tower erected in what was to become Galata. This tower was destroyed during the Fourth Crusade in 1204. In 1267 a Genoese colony was established in the Galata part of…
Cubic / Grid infil - 10% Wall loops 4 Surface pattern - monotonic lines Layer heigh - 0.2
My own take on a pistachio bowl. Designed to fit a 250g pack.
It's an open source design. Videos: https://youtube.com/playlist?list=PLgceMsQyNMfT9rvlGa_Ch6L50eUYFBX7_ Git reposistory: https://github.com/alessandroame/MFR Carbon frame version: https://www.printables.com/model/486129 My goal is to…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
