Counting matching models…
This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer. Future trailers such as side dumps, lowboys, belly dumps and cargo trailers…
While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…
These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…
This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…
These spacers are easy to print do not require supports or any glue. They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL. Since they fit tight with themselves and original tiles I wanted to have some smaller ones as…
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
Gravitrax compatible bridge for multilayer tracks without supports
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
This downloadable 3D model is a nitrile glove holder designed specifically for use with the Honeycomb storage wall system by RostaP. Features: Compatibility: Seamlessly integrates with Honeycomb storage wall panels. Material: Designed for…
I divided it into two parts for better printing, if you have trouble with the overhangs. You'll need a lot of power to get through: https://www.thingiverse.com/thing:4800097 helps, normal gauss won't work Video:…
Scenic tile! Add some travel destinations for your Gravitrax marbles with the addition of the Eiffel Tower pass through tile. My wife did one setup where she put this tile in the middle of a bunch of wavy slow rails and she called it the…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
These are straight rails for use with Gravitrax Print instructions Category: Mechanical Toys Summary These are straight rails for use with Gravitrax
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own. I also made…
Fünf auf einen Streich… Mit Stützstrucktur (nur für den Absatz unten) Standardmodell - ca. 33g (einfacher Druck) Lightmodell - ca. 23g (relativ großer Überhang, hat bei mir ohne zusätzliche Stützstruktur funktioniert)
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Gravitrax Höhenstein. Passt mit originalen Zusammen und hält stabil auf der Platte. Gedruckt aus PETG. Der Höhenstein sollte mit der eigentlichen Oberseite auf dem Druckbett gedruckt werden. Support auf dem Druckbett sollte aktiviert…
I added a printable hinge joint and turned the snap cap into a threaded cap. Makes for a less cumbersome “install” and wear. Print the cap face up with tree supports for better quality. Print the watch on a side edge (as pictured) with…
My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…
this amazingly fun addon for gravitrax adds a fun new twist to your existing tracks. it suddenly drops and then comes right back up, it incredibly satisfying & smooth!
This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…
The 3D-printed Vitruvian Man brings Leonardo da Vinci’s famous drawing into a new dimension. This version transforms the two-dimensional study of human proportions into a bumped display, capturing and merging classical art with modern 3D…
A fun rail for gravitrax. The rail is a larger wobble rail. Designed in OnShape.
These bridges give some new possibilities and can help save some spacers. Al files can be printed without any supports
I first designed the plate as one piece based on the original cardboard and then “cut” it into 4 different pieces in order to print it. Use the 4 files gravitrax_hexa_plate_top_left, gravitrax_hexa_plate_top_right,…
The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…
An accesory to lift your Gravitrax-rails. Use the enclosed F3D.-File to scale the height to your needs. Contains files for: 1HU - original height 2HU 3HU 4HU 5HU 10HU Print instructions Print in PLA. No support needed.
Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…
This is a catcher for your Gravitrax catapult. Use it together with the original Gravitrax base stone. The special thing about this catcher is that you can use the inset to choose which exit the ball should take. Tip: Glue the funnel into…
I had two design goals. First a fast print. And second in one piece without support. For the last goal the inner plate was skipped. AFAIK this surface isn't necessary in any condition. The spacer is still stiff. Even more, now a marble…
The stones are as high as 2,5 height stones. There are two parts on every design. Print the inlay up side down and glue them together. For the STLs use the “split to object” function in Prusaslicer to split the parts. Update 2022-04: I…
Yo la commu' Voici le modèle de clips de garniture reproduit sur mesure de l'original, mais rayonné aux endroits sensibles. Pour Peugeot partner et clones 😎👌 Pour l'impression : Couches adaptatives préférable. Impression fine conseillée.…
This is a christmas card for all nerds! I designed this as a greeting for my IT colleagues, hope they'll like it. At 100% scale, this is a standard A6 postcard (105mm x 148mm). What is needed? Simply use the provided step or stl file and…
i wanted to use a “professional” smartphone Holder, bute the placing in our Peugeot Partner wasnt good So this is an adapter for the use of Smartphone holders that are normally fitted to those venting grills It should fit to Citroen…
This is my version of the Gravitrax compatible baseplate with 6 exits and interchangeable insets as well as corner holes for height blocks - all for the construction of flexible tracks. To be able to use this building block, you need to…
Seat Belt Buckle Dacia Duster, Volkswagen Touran, Citroen C4 Picasso (II. Gen) and others Note: Not intended for use while driving with a passenger. -If you decide to use this adapter for tying small animals, it should be more suitable…
Remixed from Thingiverse User thomasdr if you like my model please leave a like there
To print in two colors like in the images, set up your slicer to change filament at approx. 10.5 mm. For best results, place a dummy cube next to the object and make sure that it is printed first on every layer so that the nozzle is clean…
Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
Meine 140mm Spacer findet ihr hier: https://www.printables.com/de/model/17152-spacer-140mm-gravitrax
UPDATE: The reported issue with the bridge has been solved. Additionally, you can now downland both right to left and left-to right orientations of the bridge. This collection of GraviTrax Junior-compatible tiles contains replacements for…
140mm Spacer für Gravitrax Hier findest du noch andere größen https://www.printables.com/de/model/511208-gravitrax-spacer-50-100mm if you like my model please leave a like there
An extendable track for your marble run compatible with Gravitrax. Depending on the height, the original rails were always a little too short. With this track you can adjust the length variably. Print instructions: You can print it…
UPDATE I'm working on printing this and I think it might be a little small. The printer is having some trouble with the statue's details. I'm going to try a slightly larger model and see how it works and I'll update the files here soon.…
Printed in black PETG with 0.2mm layer height, 4 walls and 30% infill. I would recommend using PETG as a minimum, for layer height you could go to 0.24. 4 self tapping screws are required per side. Update 10/11/24: Added modified cup…
The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…
I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top
These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs
A great Wall Art of Lego Vitruvian Man. Do not forget to upload your makes, thanks ! Inspired by a sticker Here are my others Vitruvian man remixes : Minions Vitruvian Man Playmobil Vitruvian Man Stitch Vitruvian Man Sponge Bob Vitruvian…
Durch diese Brücke spart man sich nicht nur viele Höhensteinen, sondern hier können neue Ebenen geschaffen werden. Die Mitte ist zwei Steine hoch. Sehr einfacher und schneller Druck. Die Drei Steine mit der großen flachen Fläche mit…
This is a set of Gravitrax compatible 'standard' inserts. More of my models Click here if you are interested in seeing more of my models for Gravitrax Feedback is always a good thing. To encourage me or other designers to make more…
One of the cornerstones of the Gravitrax system is building at height. These columns are a flexible way to build the marble tracks in an efficient way. The advantage is that the columns together with the base plate are flexible and allow…
Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…
Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.
Continue your Gravitrax marble tour around the world by visiting London and seeing Big Ben! I'm enjoying adding some scenery to our marble layouts and will be doing a bunch more. Enjoy! This is a remix of these models:…
This is a high quality curving rail compatible with the Gravitrax brand marble run. This is designed to be easy and reliable to print with minimal post processing. There is a single layer of "support" built into the model to ensure that…
Hi guys! I present here my new project, a mini RC Car, easy to print and assemble but very fast and agile. It's a super fun and reliable model and I recommend everyone to do it, you'll have fun! The parts list, print settings and all the…
Der Opel Rocks-E und der Citroen Ami haben das Problem, dass es im Winter recht zugig ist. Der Fahrtwind sammelt sich in der Türgriffmulde und zieht durch das Schloss in die Tür. An der Lasche zum Schließen der Tür ist eine Öffnung. Dort…
S-Curve compatible with Gravitrax. Easy to print , needs only support where the hooks are (see image), all other overhangs are 45 degrees at most. Maybe you can even turn off support at all if you print slow enough and your…
UPDATE: now also includes tunnel with a slope With this model, you can print a tunnel compatible with the GraviTrax Junior and extend your marble run building options. This model can be printed without any support and assembled without…
This is a lane switcher which causes half of the balls running through the marble track to go left and the other half will travel right. It consists of to parts which can be clicked together to prevent them to be separated when storing…
Presenting the leaning tower of Pisa in a Gravitrax tile to continue the scenic tour around Europe. Have your marbles enjoy the views while using gravity to follow your pre-determined paths along the way! Printed with two different…
This is a seesaw for your GRAVITRAX marble run system. The special thing about this seesaw is that you can use it with 2, 3 or 4 balls. Use the dividers to keep the desired number of balls in the seesaw. Remember that there must be at…
An improved tile compatible with the Gravitrax brand marble run. This tile consists of a single straight and two sharp turns. No supports are required and the design incorporates a small chamfer on the bottom that nearly eliminates the…
Kompatible Gravitrax Wippe Kleine Feinarbeiten durch schleifen notwendig.
A tower for Gravitrax printed in PLA. Support not needed
v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…
Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s. v2 provides larger juice volume and a optimized outlet, less dripping and better juice flow. The dome is…
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
if you like my model please leave a like there
Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…
Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…
The organizer is a simple plate with 8x3 Slots for Gravitrax elements, and can store up to 24 elements. Even most special elements fit, although they will block other slots. Freecad file for easy modification included. I printed with 2…
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces Update: updated models to not catch the marble if its going too slow
materiál PLA tryska 0,4 mm vrstvy 0,20 mm počet kusů naznačen v názvu souboru šroub M8x8 + matka 2x šroub M3x18 do otvorů 1,8mm možno zakotvit filament jako nárazník
2 collectors which can be used in my basic tile to create new marble tracks. One is the drop collector, which catches the ball from a higher level, redirecting it to a rails to continue it's journey. The other is the endpoint of a marble…
A wall mount holder for a nitrile gloves package.
This drop tube collects the balls and guides them down through the tube. The exit of the tube is compatible with the marble rails (see my other designs). Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is…
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Every gravitrax lift is motorized but not this one. That is very handy, no cables and motors, but just with your hand. You can raise your marbles to different heights. !! Now With Knob !!
Start- or droppoint for your track. the model has 3 parts. Print the parts individually.
First I needed a way to put a gravitrax tower on top of a lego baseplate, and then I needed this, a way to put a gravitrax piece on top of a lego structure. The lego side was designed to be a 4x4 lego but the gravitrax design is not the…
Here's a simple castle model on a Gravitrax pass through tile to add some scenery to your layouts. I haven't printed this yet, but when I do I'll add photos of it here. I'm planning on changing the filament between the white tile and gray…
In order to spice up GraviTrax Junior, I created a set of vertical drops, a catcher as well as a small and a big vortex to collect marbles from multiple tracks. The drops can be stacked on top of big drop towers to adjust for height and…
This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…
(25/1/4) I removed models with larger elevation differences because the ball sometimes falling off the course. I apologize for the inconvenience. --- I previously developed a Spiral Fall system capable of withstanding and adjusting for…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
Looking for straight extendable rails? This set/work is still in progress. The connector is very tight to get a stable connection between tiles and rails Most rails have walls to work even with high-speed marbles Easily printable - with…
After getting a request to transform a design into a printable object I've created this trampoline. It's based on the design of Christopher Jeschke which had the smart idea to use a balloon as base part for the trampoline. I've optimized…
Zur besseren Beständigkeit habe ich die Teile aus PCTG gedruckt. Die Zentrierhülse sollte zur besseren Haltbarkeit mit ein paar Punkten Kleber an den Ausgießer angeklebt werden, damit sie nicht in den Kanister fallen kann. Ich freue mich…
