Counting matching models…
This 3DW osVAC Adapter for Makita DPJ180 /PJ7000 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures…
This simple fence makes it easier to use the Makita Biscuit joiner vertically. It simply bolts into some factory holes at the rear of the bottom sole. There are two small inserts that prevent some M6 nuts from spinning inside of the case.…
“With the Shimano transport lock the brake pads of your Shimano disc brake are reliably kept apart.” Drop in replacement of Shimano Y8J709000 brake pad spacer, which was intended for BR-M985 BR-M987 BR-M9000 BR-M9020 BR-M785 BR-M8000…
This is a reproduction of part [H0518-3P / DJ7033-7.8-11] by the 3B auto parts manufacturer for use with H4, 9003, and HB2 7.8mm spade terminal headlight wiring. Original part: http://www.iiib.biz/en/proView.asp?id=550 For the matching…
Vacuum Adapter: Makita Biscuit Jointer to Bosch Click and Clean System. You will need an O-ring with a 25 mm ID and a thickness of 1.5 mm, which belongs in the smaller groove. To print a nice, sharp bottom surface for the inner lip, I…
Made with the intention of being used for 2026 Toby, but never finished because the 2026 metal engines are smaller than the 80th ones and the measurements were too similar to the AEG Toby Not yet test printed, no couplings/coupling holes,…
Model description The Bombardier CRJ700 is a regional jet airliner that was designed and manufactured by Canadian transportation conglomerate Bombardier (formerly Canadair) between 1999 and 2020. Their design was derived from the smaller…
I remixed the adapter from @gwendal ( https://www.printables.com/model/68024-pj7000-festool-adapter ) since his was not properly working with my Festool Cleantec.
Replace the cable with a plugit adapter. The change is reversible. Work in tandem with the CLEANTEC hose connector . Needed: Festool replacement part #489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable…
I made this model a few years back and posted it on Twitter ( https://twitter.com/Crafty_Modeler/status/1468148316781219840?s=20 ) It runs using the chassis and parts from the Bachmann Toby model. I have included a motor housing that cuts…
A nice little aircraft that took a relatively small amount of time to make, and is at the same scale as all my other aircraft. Scale 1:400.
Handle for the Makita PJ7000 plate joiner which makes it more comfortable to use for me. The handle is mounted with a M6x15 countersunk screw and a M6 locknut. For mounting a hole with countersunk is needed, for the position see photo.…
I created this adapter version because my previous design was too weak and snapped when printed vertically on my FDM printer. This version is meant to be printed horizontally, which results in a much stronger adapter when printed on FDM…
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Samsung Galaxy J7 Neo / Nxt / Core j701 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models' materials are not interchangeable , so pay attention to the file names.…
Adapter für die Oberfräse Makita PJ7000 zu Festool D27 Schlauchanschluss. Ersetzt den vorhandenen Adapter.
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You…
Additional fence for the Makita PJ7000 biscuit joiner Parameter: Walls: 3 Infill: 15% Infill patttern: gyroid Support: yes Material: PETG or PLA , 112g (incl. support) Disclaimer The use of this attachment for the Makita PJ7000 is at your…
Just a quick adapter to use with a standard festool hose. Works perfectly fine and has a snug fit. Category: DIY
![osVAC Adapter M32-PJ7000 [sturdy] (Makita Biscuit Jointer)](https://media.printables.com/media/prints/649299/images/5122850_088a5448-cb3a-47f0-bc84-bf35238d01c5_b376caa5-0f1c-4a82-ade1-6fa5bc543378/osvac_makita_pj7000_split_01.jpg)
