Counting matching models…
Acquired a benchtop jointer second hand, but it was missing the dust port adapter. This works with the Delta 6" Variable Speed Bench Jointer as shown, and possibly works with the following as they all look like they are made in the same…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for PETGSource material: PET
This is an upgrade for my Grizzly G0490X jointer. I removed the 4" port and added this 6" port in its place. The MK4 print bed is just large enough to make slightly lager than “half-holes” for the screws. Added a few washers and it works…
Simple, fast printable adapter to attach a 32mm hose as used by other Makita tools (e.g. Tracksaw) to several biscuit jointers (BPJ180, DPJ180, PJ7000). Print in PETG, 0.2 layer height, 3 walls, no supports needed.
This part is designed to adapt a 4 inch dust collection hose to the Delta ShopMaster Jointer. OD of the dust port is 3.935" which fits a standard 4" hose. No additional hardware is needed. Use the 4 screws on the jointer to attach the…
inside there is room for a plank 10 millimeters thick and 100 millimeters wide, screws M5. Your follow is my reward
This 3D printable T-jointer is designed specifically for connecting 16mm diameter pipes or tubes. The T-shaped connector allows you to create three-way junctions in your pipe system, perfect for DIY projects, small plumbing setups, or…
Friction fit Centech Quick Click adapter for those using a Cutech jointer or planer. Gives a better, faster, and less clog prone connection to whatever vacuum you are using in the shop. May also work(unconfirmed) with similar models…
This is one of a series of dust collection ports that can be found at this link: DUST COLLECTION FITTINGS. This outlet provides a vastly improved pathway for chips and dust, as well as a larger net diameter for improved air flow. Because…
Holds 2 Blades at a time at a user specified angle. Uses 6 M3x12 Button or Socket head screws and M3 nuts for assembly. I include multiple versions at different angles to cover most common cases. Print Settings: PETG, 5 Walls 5 Top and…
Holds a file (20mm x 5mm) perpendicular to a surface like a saw blade ore a card scraper.
Adapter to connect a 6" flex hose to my 120mm Hammer A3-31 dust port. Printed in PETG with supports. the small end flares out a bit to give a friction fit on the dust port. The ID on my flex hose may be a bit different than yours, so I…
Something I could not find so I drew it. Dynamix Cat5e coupler with panel housing. Category: Electronics
This model is designed by LazerShrimp originally posted on Thingiverse. Photos and description are theirs as well. Just reposting here because it is a fantastic solution to get 6" dust collection on your Hammer machine vs stepping down to…
I work at a makerspace and the original plate to connect the Grizzly g0543 jointer to the dust collection system was destroyed. It is available for purchase, but I work in a makerspace after all so I drew this up and printed it out of…
A clip for connecting two WAGO terminal blocks. Print with 0.3 mm layer height, PLA, PET-G, or another material.
Made myself a jointer mallet for my woodworking hobby, needed a holder/display to mount it on my tool wall.
This is a replacement dust port shell thing for the Ryobi JP-155 Jointer so that the hose from the Bauer Cyclone Separator kit can just plug right in to it. Specifically, this cyclone separator kit:…
This is as close of a model as I intend to make for a replacement of the original dust port for the Ryobi JP 155 Jointer.
Hone your planer/jointer blades. I made an 8" one and a 6" one. I would have made a 12" one, but I thought that not many people can print 12" high. I print it on end. I created a coupler so you could glue multiple pieces together if you…
Design Concept The Clothes Dryer Jointer is designed to securely connect the bars of a clothes dryer, ensuring stability and efficient usage of space. Its sleek design is both functional and aesthetically pleasing, blending seamlessly…
This is a Swing Guard for a cast iron bench jointer restoration as documented in my Youtube video: There are two parts in the file. I set the overlaid middle file as a modifier in the slicer and then gave it the same number of walls as…
A nut that allows you to raise and lower the thickness table of Kity jointer-planer combination machines with a drill. designed to fit an M5 bolt, that needs to be tightened in place. Print instructions Category: Machine Tools Print…
There is an angle grinder attachment from Wolfcraft, allowing you to use your angle grinder as a simple biscuit jointer. The square was missing so I designed one. An der Multi-Holzfräse für Winkelschleifer von Wolfcraft fehlte der…
A jointer knife sharpening jig, customizable for whatever dimensions your jointer knives are. You'll need 4x M3 nuts, and 4x M3 screws (12mm long worked for me). Make 100% certain you print it standing tall, not flat! Otherwise tightening…
[Only Planing Adapter] This dust collecter adapter works beautifully for the planing function of my dewalt DW1150 jointer/planer combo. It should also work for the very similar DW50. If its not tight enough on your shroud, you can drill…
This is a Jointing table for your dremel. It takes 1mm of your part at a maximum width of 35mm. I added a dustcollection port on the back for 35mm vacuum hoses. It prints without supports and for the assembly you only need 3x M5x7 screws.…
Pretty simple holder for the original push blocks that come with the Porter Cable Jointer. The holder attaches on the back of the fence, and top to bottom is just shy of what the fence measures. It definitely could be shorter, but I…
This is a angle "stop hold" for wood jointer from Wolfcraft.
I created this adapter version because my previous design was too weak and snapped when printed vertically on my FDM printer. This version is meant to be printed horizontally, which results in a much stronger adapter when printed on FDM…
If you want to do dual rail on your ratrig while using the short single stack CNC jointer this is it! I use ASA, and up by 1% for shrinkage on my machine. STL is exactly the 20mm version of the tub insert. Goes perfect for VZ CNC printhead
simple vacuum adapter, inspired by Ryobi to makita table saw variant. (https://www.printables.com/model/76720-makita-table-saw-to-ryobi-vacuum-adapter)
The diameter of the vacuum port is 35mm. Print with the bottom side on the printer bed to make the protruding peg sturdier. I printed with PETG.
The Grizzly G0490X 8" jointer comes with a 4" dust port and that is all that is commercially available. I designed this 6" version to fit in place of the stock one (including the reliefs for the nutserts that the screws go into). I…
Shopsmith does not sell this part separately, and I didn't want to buy the pricey “upgrade kit” for just one part. I printed this in both PLA and PETG. Both are acceptable but PETG is the better choice. Increase number of walls to ensure…
![[IMPROVED] Dust Collection Adapter Dewalt DW1150/DW50 Jointer/Planer 100mm Hose](https://media.printables.com/media/prints/394666/images/8521118_ec898caa-ff5d-45a7-b0fa-bed8701fe997_8f4809f5-ea6e-4bfd-af04-7ca93fe0efdc/img_4853.jpeg)
![osVAC Adapter M32-PJ7000 [sturdy] (Makita Biscuit Jointer)](https://media.printables.com/media/prints/649299/images/5122850_088a5448-cb3a-47f0-bc84-bf35238d01c5_b376caa5-0f1c-4a82-ade1-6fa5bc543378/osvac_makita_pj7000_split_01.jpg)
