132 models
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
It stores all contents of the Journeys in Middle-Earth game in the core box and its two expansion boxes. The core box holds all the minatures, the battle field maps and the rules. One expansion box contains all the cards and tokens and…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
These are card dividers for my insert/organizer for the board game The Lord of the Rings: Journeys in Middle-Earth. These dividers are in German.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Frieren: Beyond Journey's End : Bust
Print approx. €11.69–€14.29 excl. taxPreliminary estimate for one variant
Replace your umbrella holder(s) with cup holders instead Big enough for your modern tumbler, 4" circular opening, 5" deep Drainage holes allow for condensation or spillage Simply mirror the model to make the Right Side cup holder PETG…
Print approx. €7.99–€9.77 excl. taxPreliminary estimate for PETGSource material: PET
Frieren: Beyond Journey's End : Plaque
Print approx. €9.84–€12.03 excl. taxPreliminary estimate for one variant
Journey into Mystery logo from Marvel Comics in the 1960's, featuing the first appearance of Thor among others. Slice and add pause above the base layer, again above the “Journey into” text, then again about 0.8mm from the top text…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…
A collection of elements used for the game Lord of the Rings: Journeys in Middle-Earth by Fantasy Flight Games (FFG). Note : As there are many sources for this, there are many different licensing going on. I don't know how to properly do…
Stark's Axe These parts fit onto a schedule 40 1" PVC Pipe. The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon). It is suggested…
A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…
Remix of a LOTR Journeys in Middle Earth player dashboard I came across. Modeled up from scratch in fusion360 to add player card holder slits, plenty of inspiration token holders, and works with the sleeves on the smaller cards. I had to…
I was thrilled to receive the long awaited Darwin's Journey by Thundergryph Games. I backed this game on KS in Januari 2021. The box of the base game arrived in April 2023, so after some unpacking I felt the box needs inserts… So I made…
Simple but very nice 2d wall art Frieren
The butterfly hair piece that Fern wears. There is a slot for a wire slide comb (purchased separately off of amazon) to fit that holds it to the wig. The suggested type of printer is MSLA resin, but if you use a FDM, I can't stop you.…
Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…
Himmel's (replica) Hero Sword - Sousou no Frieren / Frieren: Beyond Journey's End This build uses a piece of ¾" Schedule 40 PVC pipe to attach the Hilt to the Grip . If PVC pipe is unavailable, print the Connector piece. The CloakClasp…
Printed with 0.25 nozzle, but you can scale it up and print it with 0.4 nozzle
Component replacement for Lord of the Rings: Journeys in Middle-Earth: Shadowed Paths expansion. File names say how many copies are needed for each. Nest Web and Nest Base are glued together afterwards. I added some webbing on the eggs…
For the final, updated version that includes Spreading War, go here: https://cults3d.com/en/3d-model/game/journeys-in-middle-earth-complete-organizer-playfutbol2 This organizer fits the base game plus Shadowed Paths expansion and both…
Insert for Darwin's Journey and Fireland extension The extension equipment is well separated for easy installation with or without . I've started to plan the locations for the mini extensions, but I don't own them. The insert is perfectly…
Loved the original design, but wanted the split tray to connect with or without gluing. Press the left side on top of the arrows on the right side until tray sits flush.
This is for people who want extra props while cosplaying Frieren. This prop is a small necklace with fine details. PRINT IN RESIN String a leather cord through the top loop to make it into a necklace.
A set of card dividers, to make the large deck of cards that comes with Lord of the Rings: Journeys in Middle Earth more manageable. Sized for sleeved cards. Ideally used with a card organizer such as @merkli's fantastic…
Complete Storage Solution for The Lord of the Rings: Journeys in Middle-earth (Base Game + All Expansions) This project is a full organizer and complete storage solution for The Lord of the Rings: Journeys in Middle-earth , designed to…
I wanted to create a simple and compact dashboard, so I designed this one. It is big enough to use sleeved cards. I hope you enjoy it!
This is an organizer for Darwin's Journey: Collector's Edition, with all available expansions: Fireland expansion Oceania expansion (Founder's Edition) Falmouth Port mini-expansion Animal Companion mini-expansion Darwin Worker…
Start with Black At layer 6(0.60), flip to Orange. At layer 11(1.00), flip to Yellow At layer 13(1.16), flip to White
This is my second entry for the Prusa Printers contest and it is a miniature printable in one step. Hopefully it will stand without the base but theres one included just in case.
9 bush tokens are in the base game. Don't know how many will actually be needed.
Staff fits ¾" PVC Pipe. If printing the half versions, there are three small pins to help with alighting the two pieces. If printing the staff head in full, these are unnecessary. To assemble the staff head, either cut a 50mm piece of PVC…
Map tiles insert/organizer for the LOTR-JIME including all expansions (Shadowed Paths + Spreading War) + extra slots for 3D printed terrain I am currently working on. This doesn't just prolong lifetime of the map tiles, it rapidly speeds…
These are some boxes to make the insert of Darwin's Journey Collector's Edition even better! Just print 4 Player boxes and one of everything else. The large compartment of the player box is meant for all base game pieces and everything…
Tray to store tokens (inspiration, search, person, depletion, darkness, ...) from all expansions.
Органайзер для настольной игры "Легенда вторая: Поход на Север". Ремикс. Вмещает компоненты самой коробки, а так же все необходимые компоненты из базы (Жетоны, предметы, горы, а так же планшеты героев). Всего рассчитан на 4 героев (3 из…
Golden-Winged Roc (a character from "Journey to the West")!
I downloaded some terrain files some while back, and I didn't note the name. So if you recognize the tiles, please let me know so I can give credit. These are modified to suit my needs. The battle-map for Journeys in Middle-Earth is fine…
It's designed to fit all 98 miniatures plus a separate module for the Witch-King of Angmar middle cilinder, since the figure needs to be connected directly to the base to fit in the box (I put it on module 01-01-02). The modules fit in…
Exploration tokens for the board game Lord of the Rings Journeys in Middle Earth.
Player trays for the board game Darwin's Journey . The trays fit in the game's original insert and make it easy to distribute the player pieces at the stat of the game. There are two versions of the tray: One with one compartment, one…
Trays to store all (unsleeved) cards from all expansions.
Update 2025-06-17: File "Cards Lid x3 for Option 1, x1 for Option 2.stl" is fixed. This is my take on insert for retail version of Darwin's Journey. Features of this insert: No box lid lifting. Box can be stored vertically or…
Fiat Freemont / Dodge Journey wheel hubcap (center cover).
3d scan of a Figment figure being auctioned off from The Joel Magee Disneyland Collection by Van Eaton Galleries . This Figment figure is a Audio-Animatronics prototype created for the EPCOT Center attraction Journey Into Imagination by…
seat belt silencer for dodge journey
Tray to store all battle tokens from all expansions.
We 3D scanned the sword on set with the iSense 3D Scanner. It was a perfect size item to scan and we were able to capture all of the details in the handle and blade. We designed it at full scale, printed and assembled in post. Swords were…
The Golden City arc (my favorite so far as of Spring 2025) features Denken more prominently than in S1 of the anime. This is for that 1 cosplayer! I went with more of the manga design. I cannot wait to see this arc animated! This build…
Simple model, just slice and put a pause to change color at 13 layer Start with white than change to black.
Instructions Print all parts (except the ‘Trophy base and chalice.STL’) in it's original orientation and a mirrored copy. These files have (mirror) in the name. You should have 1 base, 2 mirrored left handles, 2 mirrored right handles, 2…
it was a great approach to practice more about stylized anatomy, the model was entirely sculpted in Zbrush, rendered in Blender and composition made in Photoshop. Completely modeled for 3D printing, it was a great joy to work on this…
Disneyland Pinocchio Daring Journey sign. Made from a scan I created in the park near the carousel in June 2023. Should be a dark wood primary color, light tan for the lettering and the hangers look like old iron. Enjoy!
Heart and tear drop shaped boxes for Descent: Journeys in the Dark Healt and Stamina tokens
QR code key tag for the song Don't Stop Believin' by Journey _________________________ Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)
Drucker: Elegoo Neptune 4 Pro Material: Jayo PLA 2.0 Weiß Düse: 0,4 mm Temperatur: Düse 215° Heizbett 60° Druckbetthaftung: Brim Wandlinien: 75 Füllung: 0% Lüfter: 70%
This was specifically made for the bolt holes of a generic Android Auto Screen from Amazon but you could probably mount just about anything you like. It could probably be a little shorter, but I needed the extra distance for the back of…
These are covers for the card trays in manuelf's amazing organizer for Journeys in Middle-Earth. I found that I wanted a spacer to keep the cards from bouncing around during transit. This just sits on the printed card tabs in the original…
Clever made a very nice inlay. I found that two boxes lacked the ability to remove the tiles more easily. So I added more recesses. Just print them as they are.
This is the Traveller from Journey, made for birthday present. Created with 123D Design.
Tokens for use with the game Journeys in Middle-Earth. The Difficult Terrain-tokens were introduced in "Shadowed Paths" expansion but is also present in this expansion. I've printed 10 of them, and also use them when printed on the tiles…
Description This is a 3D printable model based on FERN from Frieren: Beyond Journey's End. Follow me on my social media Twitter: https://twitter.com/FANMADE_NFT Insta: https://www.instagram.com/fanmade3d/
Better insert which holds the cards in place, and separates the pieces in a pillowed tray for easy pickup.
The gold, silver and copper coins seen in Season 2! Do you have an elf who cannot keep to a budget, has a debt and spends too much on grimoires? If your answer is yes, then the answer to this problem is to print out currency on your…
Solitär's Sword(s) that she can summon at will. The final height of this entire print is just 4.8 feet (1.47 meters). This print requires ¾" PVC cut to 46" inches. This sword is massive and heavy and is quite the project and undertaking.…
Tyne and Wear Metro (Newcastle upon Tyne, UK) token for Ticket To Ride First Journey. The 3mf file includes filament changes for the stripes and the “M” and headlights at the front.
This insert includes: Map tile organizer Cards, clue tokens and extra character tokens organizers (personalized for each expansion) Standing investigators storage Monster boxes NOTE: this expansion fits inside its own box. No lid lift.…
Here's another probe holder for the Onefinity Journeyman CNC. This one has been designed around the block and probe that came with the Journeyman model. No supports are needed if printed in the current orientation. Tested this print with…
✨ Free DXF vector file of Frieren — the immortal elf mage from the award-winning anime Frieren: Beyond Journey's End ( Sōsō no Frieren ). A minimalist yet expressive silhouette capturing her flowing silver hair, pointed ears, and serene…
layer high 0.08 Start with Black At layer (0.44) flip to blue. At layer (0.6) flip to orange At layer (0.76) flip to ligth blue At layer (1.24) flip to green At layer (1.64) flip to ligth green
layer high 0.08 Start with Black At layer (0.6) flip to purple. At layer (0.68) flip to black At layer (0.84) flip to orange At layer (1.08) flip to yellow At layer (1.80) flip to Green At layer (2.36) flip to White.
Since there is no english expansion card dividers in either manuelf or The Ugly Dm works. I have made my own that i am sharing :)
Containers for class tokens and cards for Descent: Journeys in the Dark, second edition. Inspired by https://www.thingiverse.com/thing:431859 , but adds class specific tokens (if used) to each box. There are 3 sizes, depending on the…
Designed an angled base for my Klein Journeyman hex sets. Uses the holes at the bottom of the stand to support the keys at a 30 degree angle. Print with the base down, no supports needed. Files are for the 8-piece metric and 10-piece SAE…
A lithophane of the The Hobbit: An Unexpected Journey Movie Poster Use the lithophane profile from this website to ensure the best results. Cura Profiles – 3dprintscape.com Tags
I broke the holder for one of my banners. I couldn't find a replacement, so I made one of my own.
Design Concept The first chapter of the Benchy World series introduces a miniature scene inspired by traditional Asian architecture and symbolism. A small boat rests beneath an ornate gate, accompanied by a guardian lion and a coastal…
Midjourney Prompt: black and white industrial design sketch. Massive futuristic geodesic dome greenhouse with integrated living space. Water features surrounding the dome. Very high quality and highly detailed. --v 6.0 HueForge…
This is for people who want extra props while cosplaying Frieren.
I designed some holders for the markers that you use in The Lord of the Rings: Journeys in Middle-Earth. They are very simplistic but do the job very well. Category: Toy & Game Accessories
This minimalist 3D printed wall art shows a family walking together on a winding path toward the sunset. It’s a beautiful reminder of love, unity, and life’s journey. Perfect as home décor or as a meaningful gift. I designed this piece to…
This enchanting artwork captures a serene, cinematic moment as Santa and his reindeer move through a snowy forest bathed in soft moonlight. Rendered entirely in silhouettes with frosty blue tones, the scene evokes calm, mystery, and…
As stated in the original design, there is no space to store sleeved cards, as every centimetre is utilised. These modifications result in the lid lifting by less than 1cm. I use the official sleeves, which are 80 microns thick. There is…
These are models for my video game (Jayden's Journey) which is not released yet so here are these while you wait. Print Settings Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Infill: 20-100 Category: Models
Cover of the master brake cylinder expansion tank for Dodge Journey
This is a bracket to mount a Kryptonite Lock to an Axium Frontier rear rack. Uploaded stl's are orientated for what I feel is the best strength/printability position. You'll need: - the original Kryptonite mounting bracket. - 3 x m3 nuts…
Crests worn by the Empire's Magic Special Forces in Sousou no Frieren (only manga as of fall 2024). Looking forward to seeing this arc in animated! There is space for a flat back pin if removability is necessary. Otherwise just glue it…
This is my interpretations of the rocket ship from soviet film Cosmic Journey shown in 1936. Konstantin Tsiolkovsky was a consultant on the film and the rocket design is an evolution of Tsiolkovsy’s earlier sketches. The design also…
A highly detailed 3D printed collectible figurine of Fern, the talented and stoic young mage from the acclaimed anime and manga series Frieren: Beyond Journey's End (Sousou no Frieren). This stunning miniature captures her calm and…
In the Collectors edition of Darwins Journey there is a bunch of dead space in the box, causing the boards to move around a bit. These parts holds them in a fix position. Additionally, there is a small spacer to make it easier to access…
Clip / Hanger / Attachment point for the dovetail on the Igloo Trailmate Journey cooler. Recommended to print vertical or at a 45 degree angle with no supports
Darwin's Journey Player board with wrong size for extension Boat and cube have higher size than base game. Original model :
Meet Rudy, the adorable 3D-printed reindeer on his way to the North Pole! Competing in the "Trip to the North Pole" contest, Rudy is ready to spread some holiday cheer in four sizes: Mini, Medium, Big, and Mega. Whether as a cute desk…
This is a simple train holder for the board game "Ticket to Ride: First Journey", which has various other titles in different countries. The holder fits neatly into the rectangular holes in the game box, and each holds 11 trains. Two…
Lid for player board Darwins Journey board game. Its optional thing for playerbooard to Darwins Journey insert made by Blind Iak https://www.printables.com/model/861651-darwins-journey-fireland-sleeve-ok
This build requires a 3/4" PVC Pipe, cut to length per cosplayer's height. Print all the pieces and glue together with 2-part epoxy. When working on the staff head, slide three free-spinning rings through the center
To print, separate the bodies in the STL into: Bird Side Panels (2 x L shaped pieces) Skinny Base (with small stairs) Large Base (with large stairs) Trampoline You will also need 1.5mm (1/16") brass or stainless steel rod, cut to about…
Can holder for the Igloo Trailmate Journey 70 Quart cooler that doesn't interrupt being able to open the cooler. 2 sizes. The "skinny" size has an internal diameter of 65 mm and fits an ice cold Coors Banquet (as pictured) or one of those…
My attempt at a clone of https://www.tailfin.cc/us/product/accessories/rack-aeropack-accessories/seatpost-mimic-light-mount/ Takes an M5 screw for both pivot point and attachment point. I only had 25mm M5's on hand. I made one that takes…
It's a simple clip that lets you retract the straps when the rucksack is attached to the bags. When I first used my Db Journey bag and attached it to my backpack, I found that the straps were dragging along the floor. This little…
![[FULL GAME] LOTR: Journeys in Middle-earth – Organizer / Insert (All Expansions)](https://media.printables.com/media/prints/85015888-3dbf-4b8d-b323-b0154f11b917/images/11575651_838f240b-733c-4e53-a2be-54a246e87f80_b41c6a9c-a66c-4d3b-97b5-82932ea028c0/lotr_insert_-0-title.jpeg)
![[FULL GAME] The Lord of the Rings: Journeys in Middle-earth Map Organizer / Insert](https://media.printables.com/media/prints/3363970b-c9f1-4d4f-b94e-27f43fd4c9c1/images/11573443_6380f1bd-f6ab-461d-8e97-0f305b41aff3_56d4a5bc-d400-41f4-bfbe-60d5171d8528/big_1.jpg)
