Counting matching models…
Magnet of the Ohio State University Buckeyes Logo. This model has holes for 6mm x 3mm magnets. Base layer should be White. G-CODE has four layer pauses: 3.8mm: add magnets 4.0mm: color change to Light Grey 4.6mm: color change to Red…
I absolutely loved tacohittah's ornament , but I wanted a bigger version on a stand as a display piece. I closed the hole on the ornament, made it 300% bigger, and added a stand with the IOWA branding as an inlay. All of the pieces are…
Remixed from https://www.printables.com/model/184911-iowa-hawkeyes-decoration by Dylan2868. Changes fixed thin walls made logo and border flush added some thickness to black layers to give it some additional heft added hole at top to use…
Ohio State Buckeyes Oversized Necklace Logo that I designed. I hope you enjoy!
Made this for my sister. I sized it to my Ender 3 Bed and dropped it down to get about 2-4mm of bottom layers before doing a color change for the boarder and Hawkeye logo. Category: Art
I wanted a coaster with a lip so made a negative image version. Much thanks to original designer. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No Supports: No Resolution: 0.28 Infill: 20% Category: Decor
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
A small model of a commonly-sold 5V relay block to use when laying out electronics bays and the like. Not really intended for printing, rather to use as a guide for mounting hole placement and height clearance etc. It's as accurate…
Hawkeye logo for the University of Iowa on an Iowa background. I included a color change in the slice so the logo was a different color than the state. Space for a small magnet on the back. Printed with Hatchbox PETG bright yellow and…
Iowa Hawkeyes Oversized Necklace Logo that I designed. I hope you enjoy!
Recording Artists - Alicia Keyes
This switch cover was designed for Prusa MMU. In PrusaSlicer use “smart fill” to select the different contours. Each section has a .001" height difference to allow for easy color selection. Print face down.
Keyestudio mks base gen 1.4 board cover and stand.. some holes for cables or airflow.. you chose.. reset button for case included Print instructions Category: 3D Printer Accessories Summary Keyestudio mks base gen 1.4 board cover and…
Joystick handle for Micro:bit module from Keyestudio https://wiki.keyestudio.com/KS0296_Keyestudio_Joystick_Breakout_Board_for_micro_bit The handle has the ability to mount a basket for 18650 1pcs batteries and a power switch. You need…
Summary Wall mount casing for the Keyes DHT22 / AM3202 module. Enjoy! Watch the making off @ YouTube: https://www.youtube.com/watch?v=jPjaodAKAKo Instructions You only need 3 x M3x8 to enclose the DHT module.
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame . To use the front plate you have to remove the power jack of the board. The front plate has three 3mm holes for LEDs. Use M3 screws to mount the board…
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
This block was designed to fit the Ks0308 keyestudio Motor Drive Breakout Board for micro bit and the BBC microbit.
Ultimate Iowa Hawkeye fan set for when the game is close or a Cyclone fan shows up. Completely my design. Three separate pieces. Never find another set like this gem. Be cool on a desk or in a man-cave on the bar.
This is a Din Rail mount for a KEYESTUDIO Pico breakout board. The board can be used with Raspberry Pi Pico Versions one and two. You will need to print one tab for this design. It can be found at https://www.thingiverse.com/thing:3401942…
Funkce detekce stěn využívá senzory k detekci přítomnosti překážek v okruhu 180°, jako jsou stěny a další objekty v dráze vozu, a umožňuje vozu automaticky zastavit nebo změnit směr jízdy, aby se vyhnul kolizi. Tato funkce může být…
This thing contains a mounting plate and a drilling guide for the “Keyes Mosfet Power Control Board”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are…
The Masterton Fab Lab laser cutter had a 10mm diameter guide laser on it, and it got smashed. In New Zealand for stupid reasons importing lasers is hard. But one way we can get them is as kit parts, and Keyes sell an Arduino-compatible…
A Christmas ornament for Ohio State fans. The arms are inspired by Ohio State Marching Band formations, the "Best Damn Band in the Land," with the state of Ohio and a scarlet stripe in the center. Perfect for the tree or as a gift for any…
A compact 3D-printable enclosure for building a Wii controller to USB adapter using an RP2040-Zero and Keyes1 board. The housing keeps the electronics protected while maintaining a small USB-dongle style form factor. It includes openings…
Default print profile, mounted with M2 hard drive screws. Product page: https://www.keyestudio.com/products/keyestudio-esp32-plus-development-board-woroom-32-module-wifibluetooth-compatible-with-arduino
TDS metre KEYESTUDIO TDS metre Sensor (.f3d / .step) TDS metre board (.f3d / .step) link: AliExpress
ESP32 Keyestudio Dev Board Caddy Tray This caddy/tray has been designed to protect the ESP32 Keyestudio Dev board. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive feet hold it firm on the workbench. I've included a…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
My boss asked for a project box for the Keyestudio W5500 , with holes for zip ties and enough space for a short Arduino hat. The board slides into the grooves on the interior walls and bridge across the top is for wire harness strain…
Use a M3 screw to mount the sensor. The outer diameter is Ø21mm. I have used the sensor for my clubs g scale (LGB) indoor layout to control some signals
Presenting a purpose-designed base or platform crafted to accommodate the Keyestudio KS0429 Total Dissolved Solids (TDS) Sensor. This rectangular base ensures a stable and secure foundation, facilitating the integration of the TDS sensor…
Case for Keyes Endstop Switch to use it as 1.75mm Filament Sensor. Still working on a mount for CR-10. Print Settings Printer: Creality CR-10 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .15 or lower Infill: 100% Notes: WIP…
This switch cover was designed for Prusa MMU. In PrusaSlicer use “smart fill” to select the different contours. Each section has a .001" height difference to allow for easy color selection. Print face down.
