Counting matching models…
A practical and visually appealing solution for organizing your kitchen essentials that can be customized to fit your needs. This 3D printable holder showcases a minimalistic design with a distinct cylindrical oval shape and a rotating…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Print approx. €10.14–€12.39 excl. taxPreliminary estimate for one variant
This kitchen stationary is designed to hold a yellow sponge and a scotch-brite dish wand.
Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant
Use this pull with your foot to open kitchen cabinets!
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Design with Thinkercad. Holds 6 kitchen knives. Printed in sparky gray Eryone. Layer thickness: 0.2 mm.
Print approx. €17.32–€21.17 excl. taxPreliminary estimate for one variant
Holder for 2x kitchen foil/film wrap.
Print approx. €10.67–€13.05 excl. taxPreliminary estimate for PETGSource material: PET
This 3D-printed paper towel holder is both functional and stylish, designed to bring order and practical storage to your kitchen. Made from PLA, a lightweight and eco-friendly material, it offers both durability and a modern, minimalist…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
Hook for kitchentools for a rod with diameter 8,2 mm. The opened side for the kitchentools is for diameter 17 mm.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Here is a kitchen utensil tray that I designed for my wife.
Print approx. €12.03–€14.70 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple cable holder for the kitchenaid model: ARTISAN. To mount it, simply loosen the screws on the back and screw on the cable holder with these screws.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
its a holder for the dishes of my sons mudkitchen so we can put them in to the dishholder to dry after washing it!!
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
A simple solution for the game cockroach with missing legs. Just print without supports and fit it into the cockroach.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Add a bin to your Multiboard wall !
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
I used: PETG transparent filament 1 perimeter and 0.4mm layer height (0.8 nozzle) zero top and bottom layers global zero infill a box modifier (15mm height) with 10% aligned rectiliniar infill (it is important that the infill is paralel…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
This is a collection of remixes or add-ons for the awesome “Kitchen Sink Organizer” from @Ruiaxe. Our sink is a bit bigger so it couldn't fit the organizer. Decided to remix the original model and created a few additions that might come…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I organized my kitchen consumables drawer to make sense of all the mess using Gridfinity! I added dovetail lids to Gridfinity tubs, to allow for easy refilling of the ziplock and wrap containers. For the wrap containers, I designed them…
Although KitchenAid stand mixer is coming with an acrylic cover it does not protect you properly from nasty splashes when you mix on the highest speed (e.g. making whipped cream or butter). This is a dead simple splash guard for the 4.8 l…
Based on the original, but (1) enlarged a bit so the cord fits better and (2) used angles (no curves) so it prints w/o supports (printed on its side). I attached it with a medium size 3M Command Strip.
At home we have some food containers from a Tesco store (probably some rebrand). Unfortunately, none of the organiser models available from printables (and elsewhere) have worked well for us. So I logged into my trusty onshape account and…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This baking paper holder is designed to mount on the inside of a kitchen cabinet, providing organized storage for multiple rolls of baking paper, foil, or similar items. It comes in two versions: the standard model holds up to five rolls…
I wanted to model some fried eggs for fun. These will be a gift for my son for advent. These are scaled for a play kitchen. Scale as you see fit!
Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
This magnet toy can be used in a play kitchen or play store. The food can be “cut” between the magnets and so it comes apart like real food. The plastic knife is dull otherwise and poses no harm. Printing: Print all parts in the given…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
This printable cord wrap is designed specifically for the KitchenAid Professional 600 Series stand mixers, including the KP26M9XCOB and other 6‑quart bowl‑lift models with the same rear housing shape. The mount attaches to the back of the…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
This is a remix of Robins ts100/ts101-box ( https://www.printables.com/model/1142422-modified-insets-for-ts101-all-in-one-for-brass-ins ). I've adapted the inserts adaptor to fit insert tips from CNCKitchen. I also added a spool which…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a kitchen drawer modular organizer, it is thinked for kitchen drawer but you can use anywere you want, it is fully modular and configurable as you like. All barrs and conectors can be scaled mainly for lenght as you like in order…
Kitchen sink drain strainer there is a hollow cylinder at the bottom for a magnet.
The knobs on my stove broke so I created new ones. The width of the pin it pushes onto was 6mm on my stove, however I have made multiple sizes. Free for personal use, if you would like a commercial license to sell this model please check…
We always had to use the basket for splash protection. But for the dishes this was always a PITA. Therefore, I made this splash guard. Just a disk with some holes and grips for taking out. No big deal. Printed in ABS, we'll see how this…
Kitchen Sink Splash Pad Designed to surround the base of your kitchen sink. Print is designed to allow any water from wet objects placed on it to drip down into your sink. The sink connector model is there to hold both sides of the splash…
This is an easy storage solution for your kitchen. It fits the baking paper, aluminum foil and plastic wrap in 3 different slots. You can hang it on the inside of your cabinet door if you want. It has some holes for screws or you can use…
Printer: Qidi Q2 Supports: No Resolution: 0.16 mm
This is based on the very well designed Ultimate Kitchen Gridfinity - I've taken the f3d file for the solid base version to create only end caps and blank plates. Included are all combinations that with a 5x5 gridfinity space, which is…
A shallow tray to store your CNC Kitchen threaded insert soldering tips (V1). A user reported that the new version, which includes a new M2.5 tip, does not fit . Remixes welcome! The adapter can easily be removed by pressing down on one…
A kitchen utensils holder with holes in the bottom
You need to reexecute the extrusion as fusion 360 will give you an error. Holes are included but not extruded, if you need them you can easily to it.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Extra bumpers / antennas to attach to front of vacuum's bumper to prevent it from getting stuck under kitchen cabinets. Printed from PETG.
This is an alternative player lid for the Player Trays for the Deluxe version of the board game Critter Kitchen, by Cardboard Alchemy. The original lids are tight and they bend up the trays so when stored they don't sit flat and cause lid…
As an Engineer I was always allowed a “cheat sheet” on my exams. I also happen to love cooking and baking but I was always looking up these conversion rates, even just as a sanity check. Plus, when cooking meats, you really don't want to…
This modular kitchen dryer is built for tight spaces—students, tiny apartments, and campers. All components connect using the provided printed connector and two printable screws, letting you arrange the setup exactly how you need it. If…
Minor modification just to have the text of a different color.
I wanted a custom height and solid bases for the Kitchen Gridfinity collection. I found a parametric remix with solid bases. However, it didn't include a parametric model for endcaps. To fix this, I modified the design to a parametric…
Fits original lid and hinges
This inlay is to compliment my other inlays for Werckmann / Action Store organizer boxes . I just figured that I never need my CNC Kitchen TS-100 soldering tips without my threaded inserts and vise versa, so I can as well just store them…
Simple and Functional Three-Piece Garbage Bin for Your Kitchen Keep your kitchen organized with this straightforward three-piece garbage bin. Consisting of a basic square container and a convenient lid, this minimalist design is perfect…
Something to hold your sponges at the sink and let them drain off water. This includes a slight sloped floor which drains out the front holes to prevent dirty sludge water from collecting. This prints without support on my mini!
Kitchen aluminum foil used to come in a box with a sharp metal serated edge. Some still does, but the brand we buy has just changed to have only serated cardboard (which is about as sharp as butter). Also, the flimsy cardboard boxes are…
NOTES: 3D printing isn't a food safe process, filaments have unknown additives and colouring chemicals, brass nozzles can contain lead, and layer lines are shown to trap bacteria and cannot be adequately cleaned; as such this design is…
Box with 6 compartments to store your usual baking supplies of a standard size.
Simple solid pretend sauce bottles for my son's play kitchen. He makes sure to use all three in every dish. Printed in PLA, 3 walls with cubic infill for strength. Easy to multi-color print: Slice into separate areas for automatic color…
No stand with the device. Argh!. This one works fine. Fits a Kitchen Aid Cordless Variable Speed Hand Blender Step and freecad included Category: Kitchen & Dining
Hey, i have done a second (spice) rack for a friends kitchen to get more space and a cool looking. Its for wall mounting for example on the side of a kitchen cabinet. You can resize it in your slicer for your needs. Without resize it is…
Add some delicious fun to your child’s play kitchen with this 3D printed toy fried egg . Designed with a playful look, it perfectly mimics a sunny-side-up egg and is an ideal accessory for pretend cooking and role-play games. The model is…
This model was design to replace the kitchen stove knob Printing notes Supports : Yes (may be can be printed without) Layer height : 0.2 mm Infill : 15%
Complete your child’s play kitchen breakfast set with this 3D printed toy toast topped with a fried egg . Designed to look like a slice of bread with a sunny-side-up egg on top, this playful accessory adds more variety and fun to pretend…
This is a remix of the @ CNCKitchen case for his excellent insert inserters. I originally posted this as a make, but I had requests for a model, so here it is. It fits into an Altoids tin and has a small area to put a few of your…
Low Poly Kitchen Cabinet 3D Model
Paper towel holder for the 20 mm Conduit Kitchen Rail . Print two of the “Paper Towel Holders” and two “End Caps.” Cut conduit to appropriate length, and insert into the Paper Towel holders. Insert the End Caps and mount it to the 20 mm…
So you bought the 3, 4, 5 mm threaded inserts set, and T18 soldering iron adapters from CNC Kitchen and need a container? here you go. Just drop the inserts in their compartment, 3 to 5 left to right. Each compartment also has a pocket to…
I created an adjustable kitchen roll holder for rolls up to a diameter of 20 cm and a height of 26 cm. Base_Bottom has two places for weight to improve stability. I printed it from PETG material with a thickness of 0.2 mm, but it should…
A simple Box, made for my wife to stock her film rolls. Easy to print with good cooling for bridges. Take care of stringing : 1.4 mm // 50 mms. For mks3+
Remix of original model to allow more / less hooks, diferrent spacing, etc.
Print with the sensor windows downwards without supports. Simply stick it on the VHB tape.
The DataToaster 3000 is a fully functional NAS with two 3.5 inch hard disk docking stations built inside of a toaster. The hard disks can be easily swapped out (while it's powered off) without taking anything apart. It uses a Zimaboard…
My knob broke and I needed another. It is modeled closely to the original. Print oriented flat on your build plate (no supports required) and enjoy new life from your convection toaster oven!
Serving plate with a matching dome for a toy kitchen. I made this for my son at his request. Inside the dome, in the upper half, I added a slope, so the overhangs are less steep, and it can be printed without support. Use adaptive layer…
The old hands broke so I made new clock hands for my kid's Playtive kitchen.
Combine two trays to make one large tray.
Kitchen Leg Clips from Ikea. One is the standard version Another is a long one
Standard print settings, some foodsafe filament.
HookJab's design is great, but I use my pinecil on the go frequently so it lives in it's travel case but I use the heatset inserts less frequently and rarely away from my work station. I remixed the design to make it more compact, and…
this is designed for the 1 base middle rail drawer design.
Children's toy, kitchen mortar, to pretend to make pesto and grind small things, complete with pestle
Print the hooks laying on the side, and then press them in from the back. Attach to the wall with Tesa Powerstrips. The poster strips are strong enough, no need for the stronger ones. Remember to leave a small tab prodruding at the…
Use a cable tray - cover of 30mm widht and patch/glue it to the kitchen tiles. This creates a rail for different hooks to be snapped in. Configure to your own desire and slide to rearrange positions or remove unused items.
Modular kitchen knives holder with dovetail joints to easily swap, remove or add new. Does have inset 6x2mm magnet in the blade plate to minimize rattle when opening/closing drawer. There are models for different knife sizes: 21.5mm…
Just learning Fusion so creating random things for my house of use. Created this kitchen caddy to go on a draining board with a drainage hole in the bottom to stop gross water building up! The separator allows you to segment the caddy at…
A simple splash guard/lid for the KitchenAid bread baking pot. The first two parts can simply be glued together. inspired by: KitchenAid shield with attachable funnel by Heiti - Thingiverse
I could not find something that looked decretive and held all these things , So i made this. It has slope for draining and there is a gap under all the holes to let it drain towards the sink. Prints good depending on your machine and…
