Counting matching models…
NOTE: no need to print the wings V3 if you decide to print the V4 and viceversa, the same goes for the quest_stand, the only difference between the 2 is the text on the base. Update 03.07.24: New improved Controller wings and HMD model,…
My first real sculpt made in sculptris from a sphere! prints well on my SL1 with the beak facing up, have fun!
Kiwi is a cute bird that only inhabits in New Zealand。 It's cute and only goes outside at night, it's hard to meet Kiwi in the wild during the daytime. Now it's a symbol of New Zealand, I love Kiwi very much, so I designed a Kiwi that can…
My attempt at an articulated kiwi bird! It prints nicely in PLA with a .15mm layer height.
Print this cute articulated kiwi without support or brim. It comes in several different versions: a standing version that is wider and more stable, a skinnier version with a built-in ring, a two standing versions with the KiwiFil brand…
This remix of Ryan1705's Kiwi print splits the kiwi into two halves so that it prints without supports. The two halves join together with printed dowels. I've also scaled it up to 200% so the small details would be more robust on my FDM…
This is one of the animals I found fun to make a kit card from. All the slots go in the same direction, just slide each panel into the slotted disk and set it into the baseplate.
Straight from the forests of New Zealand and into your printer comes this delightfully chonky kiwi bird, now in ultra-chibi form! With its big eyes, soft belly, and signature long beak, Kiwi is here to strut across your desk or shelf in…
I needed a clip to route the Kiwi Design Quest 3 Link Cable safely off the rear of the head strap to reduce strain on the plug where it exits the headset. I gave a clip a slightly curved profile to match the shape of the Kiwi Design head…
Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head. Be sure to post a make and…
Easy to print. I used PETG, but you can use PLA. Perfect for that last meter filaments, as it weights only 3.6g and 2g.
Kitcard to make a KIWI bird. Can be printed on the MINI without brime and support. For more informations about the real Kiwi bird follow this link. https://www.doc.govt.nz/nature/native-animals/birds/birds-a-z/kiwi/
Oculus Meta Quest 2 Kiwi USB Cable Clip
I Made this clip to hold the cable running from the Googles to the PowerBank at the back.
Meta Quest 2 to Meta Quest 3 Adapter for Comfort Head Strap from Kiwi Design
il primo driptip per la sigaretta kiwi fatto dalla DYNAMICS
Best Adapter for Kiwi Strap Q2 to Quest 3
This is a kiwi, the national animal of New Zealand. Kiwis are flightless birds that are nocturnal. I made this design myself. You don't need supports for the print, I went with my standard printing settings and it went fine.
Kiwi is just cute ! So I made one. No need to use supports. Hope you print it well :) (This beak to body size is one I can easily assemble. You can scale according to your machine)
Need minimal support only from bed.
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
This robot is meant to be an improvement to the existing XRP robot drive base. The robot utilizes three omni-wheels to allow the robot to move in any direction at a time. By enabling holonomic motion with this drive base provides students…
Celebrate in style with kiwi shaped cookies! This cookie cutter is quick and simple to print. Print without supports or raft. Brim is typically not needed. You can also find the recipe for Grandma Carla's gingerbread cookies here:…
This is 7 different kiwi (bird) leg bones that have been segmented. Category: Animals
drip tip di varie varie dimensioni, sia come foro interno, si come diametro esterno
Created this for printing on my Elegoo Mars, and found it can be scaled incredibly small. Category: Sculptures
Halter für E- Zigarette. Kiwi Vapor Halter für Akku + Pen + Coil --------------------------------------------------------------------------- E- Zigarette stand. Kiwi vapor stand for powerbank, pen and coil. Printed in PLA 15% Infill
Bring a little piece of Aotearoa into your wharē! The kiwi is a native, flightless bird in New Zealand and this wiggly version is set to come into your home. There are print profiles for an AMS-compatible coloured version and a…
KIWI cap really useful to protect the tip of the e-cig. JUST PRINT AND ENJOY I suggest to print in TPU to be more flexible and durable. ___________________________________________ 0.24 Layer height No Support No Brim
I've adapted the original clip to ensure a more steady clipping with Kiwi Elite Strap
1:1 and 1:4 Scale model of a kiwi. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. There…
— Updated with the brand new “KiwiFil Cardboard Companion” masterspool! :-D — Cardboard spools giving you trouble? This may be the solution for KiwiFil and other brands using cardboard spools! --- Spool rims --- Cardboard spools are great…
This is simply a Kiwi Bird, the most beloved bird in the world! I mean… who wouldn't love this thing. Support me, and the Kiwi's so that I can thrive in bringing awareness and they can thrive in basic living standards. PLEASE DONT SELL,…
Printing Information: Use tree support to support the voronoi structures. Use a brim to improve the contact surface with the printbed The sparse variant is easier to print, the holes being bigger help with the removal of the supports but…
This cable management clip snaps on to the black plastic band of a Kiwi halo-type headband for the Quest 3/3S VR headsets. I have a ~5.5 mm thick link cable, but it should accommodate a bit thicker if necessary. Rotate it on its side to…
Made this to suit my cardboard spools I buy from a local supplier and my AMS. I printed in PLA to start and also did one in PETG. Both worked great with no support needed at 0.2mm layer height. Has spikes to aid in gripping the cardboard…
An "ear flap" audio enhancer to help direct the sound from the speakers to your ears more effectively. It is designed to fit the Kiwi Comfort Strap for the Meta Quest 3. I printed the enhancer itself in PLA at 50% grid infill,…
This is my first model I have created. Printed on a ender 3 0.2 height with 15% infill
This is a battery mount for a Quest 2 HMD with the Kiwi headstrap. It attaches a Anker PowerCore 13000 to the rear of the headstrap to balance the headset out, and increase the battery life substantially. This mount is attached via two…
This is a spool holder/stand designed for KiwiFil 2 kg cardboard spools. 2 kg spools typically don't fit on regular spool holders, so we designed this standalone holder/stand. It can also be used for 1 kg spools. Print the tube with the…
box porta sigarette elettroniche kiwi portatile, apertura tipo pacchetto di sigarette, capacità 4 unità con apertura e chiusura magnetica, l'idea mi è venuta per necessità, tenevo in tsca la kiwi e si riempiva il driptip di sporcizia che…
WIP Lenkrad für den Kinderwagen. Der erste Druck mit 50% und qualitativ minderwertigen Filament ist raus und funktioniert.
TIKKIWING - Control Horn 0.2mm Layer / 80% Infill / No support PLA/PETG
Model łącznika do wężyków od spryskiwaczy - banalna rzecz która gdzieś w sklepie kosztuje grosze - ale zanim się pojedzie do sklepu lub zamówi przez Internet można taki łącznik sobie wydrukować 11 minut.
I printed original clip for myself and my wife noticed that it looks a bit like a kiwi bird, so I gave it a pair of feet. It holds 1.75 mm filament, prevents the end from tangling.
this is the final dimensions of my speaker arms that house tectonic tebm35c10-4 BMR drivers, these are cheap and easily available. for those in UK, can be purchased here: https://uk.rs-online.com/web/p/speaker-drivers/1345563 this started…
Replacement claw parts for the KiwiCo Arcade Claw https://www.kiwico.com/kiwi/arcade Need to print 3 total, either 2 eye pieces + 1 jaw, 3 regular claws, or any combination you want.
Accessorio kiwi per laccietto. Sia senza power bank che con, infatti teovate 2 modelli. Seguitemi e lasciate like perfavore. Grazie in anticipo
A model used for teaching needle bevel theory or just having fun. :)
Attaches by taking off the 2 pads and the the top strap (which are all attached with velcro to the back) and then pulling ithe top strap through the loop that on the back-side of the 3D print. Then just attach everything back as it was.…
Demi Kiwi à poser. Impression en multicolore sur deux couches obligatoire. Utiliser la fonction “Surface irrégulière” (dans Orca) sur les contours du corps marron.
TIKKIWING - Motor mount Fit AXIS Flying AF204 - 2910KV 0.2mm Layer / 80% Infill / No support PLA/PETG Use thread lock on the motor screws
It prints very well without supports and without any brim or raft
Just a fidget toy I designed. I'd seen similar but didn't like them as much, so designed my own as a 'learning fusion' self challenge. I'm sure I could make it much faster and more efficiently today. After a while I decided to put a logo…
3D scan of a nice kiwi from new zealand, scanned with OpenScan Mini using a IMX519 Arducam and cloud computing
TIKKIWING - Motor mount Fit DYS 1806 2300kv 0.2mm Layer / 80% Infill / No support PLA/PETG Use thread lock on the motor screws
I used PETG. Need support
Lejek do płynu od spryskiwaczy (pasuje do Orlen i inne) - średnica 29 mm, Windshield washer fluid funnel, Nálevka kapaliny ostřikovače čelního skla Moje ustawienia wydruku: Materiał PLA, warstwa 0,3 mm, wypełnienie 15% lub więcej, podpory…
Table stand for Kiwi Spark Print with PLA Print Settings Rafts No Supports No Resolution 0.20mm Infill 15% Filament PLA
cap for kiwi electronic cigarette
my new design for my two kiwi , it includes 4 10ml bottle, 2 replace coil , 2 drip tip (if you use also the cotton drip tip) Category: Electronics
I made a little guide to keep the PTFE tube in place. I prefer the open version. I also included a closed version but you should try the testfile before. Scale up te ring to your needs and print than the closed one. I used PETG. Thanks to…
TIKKIWING - Landing skid 0.2mm Layer / 80% Infill / No support PLA/PETG
Modification and slicing done with OrcaSlicer. I printed these with PolyTerra PLA, nozzle temp 205c, bed temp 60c. It's recommended that you tune and calibrate your printer first before printing this. Printed with stock Q1P. Print…
. This lets you mount a See3Cam 20 onto the wrist of a LeRobot Follower arm or the arm of a LeKiwi mobile manipulator. I had a couple on hand and wanted to use one for the wrist-cam on the LeKiwi I was building vs. ordering more parts.…
Meet the Kiwi Turtle, a fun and creative fusion between a turtle and a kiwi fruit! This unique 3D model combines nature-inspired design with playful functionality, making it a perfect print for collectors, kids, or anyone who loves cute…
This is my first 3D project ever published. It is a foldable stand for KIWI (v1) electronic cigarette. When closed, it is designed to carry two coils. When open, it can accommodate the KIWI with its battery, two coils and a refill bottle.…
Kiwi Sigarette POD's Holder for carrying around and display on the desk. Can also be printed in TPU for a better grip. FOLLOW ME ON: ⚡︎ YOUTUBE: https://www.youtube.com/AlessandroIppati ⚡︎ INSTAGRAM:…
Extremely simple yet functional holder for Kiwi Pods. The gcode may result in some stringing and has zero infill, consider slicing your own gcode.
Source: https://www.models-resource.com/pc_computer/digimonmasters/model/6020/
Hello everyone! I've designed these simple boxs for stack up to 3 Kiwi Pods. I Hope you'll appreciate this! There are 2 different version. The first is to store 3 Pods without drip tip (more compact) The second is to store 3 Pods with the…
A small articulated desk buddy inspired by a sliced kiwi. The model features movable legs connected with print-in-place joints, allowing simple posing and interaction. The arms are fixed, while the detailed fruit cross-section adds a…
A variation of JJ . You can insert magnets and print a saddle to let Thag ride it! Thanks to all my Club Members who make all of this possible! If you like my work and want to get everything for $3 a month join my Printables club!
This modifies the original model to both increase the cable diameter (and opening) to fit the thicker Kiwi design cable and modify the clips for secure attachment to the Kiwi design head strap. Print on side without support. Light infill…
The monster from the dephths of the sewer has risen. it has destroyed many towns destroying everything in its path but now you can 3d print him so that's a plus. Post makes of your fun multi headed friend.
Ho realizzato questo supporto su richiesta per la sigaretta elettronica kiwi go+ in modo che possa essere posizionata sul tavolo senza ribaltarsi o rotolare via. È progettata per essere stampata in pla o petg. Divertiti e buona stampa! I…
Reduced details compared to the original so that the print is more FDM-compatible. A cavity and slot for a money box were also added. Printing is done in four/five parts: Body left/right Leg left/right Pin (2x) The respective body is…
just a goofy ordinary kiwi bird doing its thing
BOM Magnet - Neodymium disc shape - 10mm x 4mm ( aliexpress ) kiwi holder
This is a tribute to Kiwi! *, the longtime legend of youtube. He’s caught in his single teared moment of bliss as he flies to rapture. This little flight-full Kiwi prints best at the current orientation (for beak strength.) It does well…
This is a flexi kiwi with a kiwi flag embossed
Front and back clip for 2 cables
I made tihis when I noticed my kiwi crate safe was missing it's key. This took a bit with some re-adjusting and having to make it from an image but the finished product should work unless you assembled the safe wrong. (If all else fails,…
Printed with 30% lightning infill. Feel free to modify the project to your likeness, maybe to add other sockets
Of course your Flexi-Kiwi ( https://www.printables.com/model/497594-flexi-kiwi-articulated-kiwi-bird) needs a santa hat! Print the hat on its side - with support - and simply push it on to the head of the kiwi! :-D A filament change from…
This upload is slightly different from the kiwi cranium in that I finally sculpted a mandible! Approximate length from beak tip to occipital bone is 200mm. Scale the mandible appropriately (approximately 185mm) Sculpted in Blender based…
This was my first-time printing in multiple parts so the pegs may need to be sanded down a little for the pieces to fit. Also, be careful with the scale. I would not recommend printing this any smaller as the ChibiKiwimon's legs are very…
Hello everyone! I've designed this simple box for store up to 6 Kiwi Pods. I Hope you'll appreciate this! Warning! You cannot stack a pod with the drip tip, because the top is too short for it! Instructions for print: Wall loop: 2 Top…
my 1st go at creating 3d animal it is a kiwi i think it has came out good
My attempt at an articulated Kiwi! done in 2.5D It prints nicely in PLA with a .2mm layer height it is quite small i would upscale it a bit.
Of course your Flexi-Kiwi ( https://www.printables.com/model/497594-flexi-kiwi-articulated-kiwi-bird ) needs a royal crown! Print this crown on its side - with support - and simply push it on to the head of the kiwi! :-D
Clips to attach the Sony ZX100 headphones to the kiwi design head strap.
An adjustable audio strap designed for any kind of HyperX Cloud series headphones. Specificaly made for Kiwi design strap. Compatible with any Cloud series headphones. Printed with 100 % infill for strenght. If printed verticaly adapter…
A stylized low poly 3D model of a kiwi, created with clean faceted geometry and smooth rounded forms. The design represents the fruit’s characteristic oval shape and textured surface in a minimalist, geometric aesthetic.
