113 models
Model This is a right angle bracket and nato rail to help attach a Blackmagic micro converter to your rig, tripod, drone or live streaming station. The bracket uses the original screw holes to securely attach to the adapter. Parts needed…
Magnet Ivy – Flexibler Efeu-Kühlschrankmagnet mit beweglichen Ranken (Print-in-Place) Mit Magnet Ivy holst du dir ein stilvolles, natürlich wirkendes Dekoelement an jede magnetische Oberfläche – ob Kühlschrank, Whiteboard oder…
Two-Piece Dust Cover for the Blackmagic Speed Editor. With easy to print thread. I don't know what to say… it's arguably the best design for the task :)
The Pokéballs hold 6mm x 3mm magnets, which can be glued into the bottom of the shells. All parts are printed separately, no need for any kind of multi material system. You can print all parts separately in their different colors and glue…
This bracket is for mounting a Blackmagic ATEM Mini Extreme onto a Penn Elcom R1290/1U Sliding Rack Tray. Use 10-24 bolts and square nuts. (Washers also advised.) The left bracket is provided - just mirror it in the slicer to get the…
Zahlen für Kühlschrankmagneten ca. 50mm hoch Magnet Ø6x3 Kann mit Solidworks oder anderen Programmen geändert werden Magnet einfach einkleben und fertig Reche mit deinen Kids spielerisch in der Küche oder an einer Magnettafel Sobald ich…
The Blackmagic converter box itself has no means of mounting, so we made a custom bracket that allows you to mount the converter with either male or female 1/4-20" threads. As an added bonus the bracket protects it from drops as well.
Table mount for the micro converter bidirectional from blackmagic. It fits the 3G and 12G version. Fits table with a 7cm thickness. Holds two converters.
Support for holding 4 Blackmagic design mini converters.
This is a screen cover I made for my BMD 12g Video Assist 7". The face of this is meant to flex allowing for it to be attached and removed without breaking. Printed in bambu labs matte PLA. Angles could definitely be refined for cleaner…
I needed to hold a set of Blackmagic Design micro converters in a tidy way. Fortunately they have a nice hole pattern on the side (34mm spacing), which was easy to adapt to DIN rails. My design forces space between each converter since…
The low cost bluepill board can be converted into a blackmagic probe, which supports JTAG/SWD debugging of many targets. To do this DFU/blackmagic.bin is needed, can be programmed onto the stm32 using serial bootloader or with an STLINK.…
Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag…
This is intended for range use. I would not trust my mags with it in the field. Print standing up with no supports. Material and print settings depending on how robust you want it. Fasten pieces with 3mm shock cord. There is one back…
Blackmagicdesign Mirco Converter BiDirectional SDI/Hdmi Holder The converter slides in and does not slide out. I sliced with Cura and used tree supports for overhangs. Cheers Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
A clip together sun shade for the Blackmagic Video Assist 5" unclips and lays flat to easy fit in your bag. print using PLA+ or preferably PETG.
Mounting a Blackmagic Design BiDirectional SDI Converter to a DAP 2HE 19" Rackmount . Combine with other available Parts for RasperryPi and others. Replace the existing M3 screws on the bottom with two M3x8 or better M3x9
Ich habe ein abgewinkeltes Gehäuse für den Blackmagic Speed Editor entwickelt. Es ist um 20 Grad geneigt, was die Benutzerfreundlichkeit deutlich verbessert. Es fügt sich der Form des Editors an. Ich hoffe, dass es jemandem gefällt. Die…
BMPCC 4k/6k mod that solves a few problems with the BMPCC line: 1. Vastly improved battery life/low cost with NP-F batteries, and flexibility to balance weight/run time with NPF 550/750/950 support. Also add 2 standard 5.5mm output power…
I know there a donzens of those Samsung T5 SSD holders available for the Blackamgic Design Pocket Cinema Camera 4k, but I thought I give it a go. Biggest difference: SSD can be slided in and snaps with the back latch, so the supplied…
1U rackmount, consisting of 4 screwable individual parts for Blackmagic MiniConverter.
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
Fiber optic converter mount for Blackmagic URSA camera. Incl. gear ring
I've made it a bit less high to fit the dimensions of the mini converter, also I moved the screw holes a bit to fit better. I've added screwholes at the backside for storing the original screws. Also there is another file which is meant…
Mounting bracket for Blackmagic Design converters. Utilizes the screws from the converter housing.
The GeekMagic Holographic Cube Stand raises the cube a few degrees forward, which helps you see the animation better if your table is low. There are holes for the legs at the bottom, which need to be peeled off the main part of the cube…
Model These adapters allow you to attach a Blackmagic Micro SDI -> Hdmi converter to the SmallHD501 but the adapters should work on other monitors with LP-E6 battery slots. Print Settings I would highly recommend printing this with 3+…
“ Du Schatz, hast Du meine Pillen-Dose irgendwo gesehen? ”---------- -----------" Das Du aber auch immer Dein Zeugs überall rum liegen lässt! " “ Hab ich die heute schon genommen? ”---------- ----------" Schau doch mal am Kühlschrank, da…
I Designed a Mount for the Blackmagic Micro Studio 4k G2. I you use a cage and a dummy battery you cant mount something flush to the back. so i build this extension which extends the cage that you have a flush mount on the back side with…
RackPi Style Mount for Multiple Blackmagic Design Micro Converters (see STL names) on DAP 19'' 2HE MP-1. If a Converter is missing that you need, write me a message and i'll ask some measurements to add it. Tested on this printable…
English below Innen ist Platz für einen 8x3mm Neodym Magnet Erste Farbe weiß Bei 3,6mm dann den Magnet einlegen. Bei 4,1mm Filament auf Gelb wechseln. Bei 5,1mm Filament auf Schwarz wechseln. meine Druckeinstellungen: Schichthöhe: 0,1mm…
Lens hood for the Blackmagic Studio 4k, may work with the studio 6k. Designed to cover the Panasonic 45-175mm zoom lens and make the camera look better proportioned Printed in PETG-CF with a 0.6mm nozzle. Files include branded and…
Single Blackmagic Mini converter vertical stand. You can put serval side by side.
Replacement for the audio dials of the Blackmagic Design URSA Mini Pro 4.6K (G2) and 12K cameras, which tend to break quiet easily. I resized my preferred design of the original models, so it fits perfectly. The original models were…
I needed to record to a T5 SSD from a Blackmagic Hyperdeck that is mounted in a Teranex Shelf. The Teranex shelf comes with 2 blank spaces for when you only have one device to fit ⅓ of the rack space. This will take up one of those…
Its very easy to print. You dont need any supports. We wanted a system that is robust and easy to fix if something breaks. The converters sit in the pocket without play and can be pushed hard from the front without falling out. But it is…
This sleeve is a part of a mounting system that allows you to mount converters, screens and other video hardware in rack units, on walls and on tri- or monopods. The sleeves connect to other parts of the system with a locking dovetail,…
Did a remix so it could be mounted on a flat surface. Titled the design for better cooling.
here is a rack for the mini fiber converters from blackmagic, they can be clipped together.
Mount for the ESP clock cube from GeekMagic for edges.
It fits the FILMCITY BMCC 2.5K rig
Snap in cover to protect the screen of the camera during transport. Remixed from Abbott_Daimler's sunshade model.
this is a remix on Caleb pikes pelican case insert for the black magic case, it is raised by 10mm and has holes
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter SDI to HDMI 3G I made this model to mount…
This is a holder for the Blackmagic SDI converter. It´s meant to be on a camera tripod. The part has a space for the velcro to be used.
This piece is specifically designed for the URSA Mini Pro 12K and Samsung T7 series' cables. An M2 10mm bolt is used to fix the part to the camera, the USB C cable is pressure-fit. To make things extra secure, you can epoxy the cable to…
Drive bay for Samsung T5/T7 SSD for Blackmagic Design Micro Camera 4k G2 You can use it with any USBC cable but for extra neat look it is designed for this 10cm double 90degree cable. Designed to use with this camera cage.
Made these modesl myself on tinkercad. PLEASE NOTE: You will need to buy longer screws! I bought a 50 pack on Amazon for about $6, search for these: M3 x 8mm Countersunk Flat Head Machine Screws One bracket is for the “top” side, and the…
Is a simple shape to protect screen of BMD video assist 4k, print face down without support, i choose to print 0.1 slower to have best protection for my VA. If you like, you can paint internal part of logo :-D
Small side hook to attach the converter with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
A clip designed to hold your BM converters onto the Honeycomb storage wall . I use the honeycomb storage wall to make a quick setup with the atem mini mix , converters and cable clamps . These are the converters I have. If you are missing…
Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter BiDirectional SDI/HDMI 3G I made this…
A model to put a magnet inside. The magnet used is 18mm in diameter and 5mm in hight. There is an enclosed version and an open one. For the first you need a print stop to insert the magnet, in the second one you glue the magnet in place…
Adapter to fill the gap when using a Sandisk Extreme SSD. There are two versions of this drive from what I know though. I tried to modify another file that was for adapting the T7, but since this has a weird angle, I ended up having to…
Designed for our TV Studio 4K it will probably fit all modern (2018+) panels and surfaces.
Hi all, This is a templates for the P6K side plate, should you want to create your own accessories. Enjoy!
Even on minimum brightness, the GeekMagic Smart Weather Clock (amzn.to/41RDU9z) is too bright. So, I made this housing to try to keep the cool idea but to drastically cut down on brightness. Print however you like. Just ensure it's flat…
kleine Vase als Kühlschrankmagnet (60 mm hoch) Sie ist als “ funktionstüchtige/wasserdichte ” Vase erstellt ABER es kommt auf Eure Drucker/Druckqualität an ob sie dicht ist. Wenn sie mit echten Blümchen dekoriert werden soll empfehle ich…
English below Innen ist Platz für einen 8x3mm Neodym Magnet Erste Farbe weiß Bei 3,7mm dann den Magnet einlegen. Bei 4,3mm Filament auf Schwarz wechseln. meine Druckeinstellungen: Schichthöhe: 0,2mm Bügeln: ein/alle Oberseiten Inside…
Holder piece for the Blackmagic HDMI-SDI Micro Converter. The bottom side of the piece has a tripod mount screw socket . I used it with a cold shoe adapter to mount it on top of my camera. However, you can also connect it directly to a…
Created this snail design for the “refrigerator magnet" contest The hole in the bottom is designed for 8x2mm magnets like this: https://amzn.to/38wGPeA (+0,1mm tollerances for the height and diameter are considered) printable without any…
I really loved the U Bracket from Andycine for the Ninja V, but they did not make one for the Blackmagic Video Assist, so I designed one in the spirit of that bracket. If they ever make one, I'll immediately purchase a metal one from…
Small side hook to attach the distributor with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
This is for getting the full frame field of view and depth of field. Existing speedboosters for the BMPCC6k are expensive. This one is DIY and can be done for about $150 US - the cost of a standard speedbooster. That's because all you…
Outer enclosure for the GeekMagic MiniTV Weather Clock.
FlickMagnet is the ultimate solution for anyone who wants to keep their fridge tidy and organized, without sacrificing style or functionality. Our innovative design allows you to effortlessly remove papers from your fridge with just a…
Eine kleine, einschlagende Rakete als Kühlschrank- (oder andere magnetische Flächen-) -Magnet. Sie ist etwa 56 mm lang. Ich habe vorne ein Sackloch für einen runden 8x3 mm Magnet rein konstruiert.
Hi all, This is a small adapter that allows you to use a Tilta BMPCC top handle (TA-QRTH) on the P6K. You'll need: ¼ inch threaded inserts. I used these 3x ¼ inch screws, like in this kit I printed my kit at 0.2mm with CF-PLA for…
Bolt to keep the Smallrig cage for the 6K/6K Pro cage aligned to the 6K Full Frame. This is not for full support to hold down a rail or anything like that. I just didn't like the wobble it had without some support. I also wanted it low…
Der Nähhelfer kann ohne Support gedruckt werden. Benötigt werden 3 kleine runde Magnete (3mm x 8mm) sowie Sekundenkleber bzw. PLA-Kleber, um sie einzusetzen. Danach kann das Modell als magnetische Saumhilfe oder als Kühlschrankmagnet…
Components: - Matek BEC12S-PRO 3-12S 5/8/12V 5A - Pasiv Cooler 23 x 23 x 6mm - 4x M2 heat thread
Hi all, This is a little accessory that will allow you to mount a ¼ 20 UNC threaded insert to the front dovetail of Blackmagic Design's Cine Handle. In order for this to work, you'll need: M4 Threaded inserts no longer than 6.3mm, I Used…
Inspiriert vom Logo des Mercury Cougar habe ich hier das Logo für einen Kühlschrankmagneten verwendet. Auf der Rückseite des Logos befindet sich eine Aussparung für einen Magneten. Magneten mit Durchmesser 5mm und einer Höhe von 3mm…
use it to slightly angle the monitor for better viewing when placed on a desk or lectern
During a recent production, we noticed the absence of a suitable stand for SDI to HDMI or HDMI to SDI converters that could be securely mounted on production or DSLR camera rigs. I used Blackmagic Design’s BiDirectional SDI/HDMI 3G as a…
This bracket can be used to lay the BMD eGPU or eGPU pro on its side instead of it standing vertically. It has slots in various areas to run straps through to secure the eGPU to the bracket. I use them to mount the eGPU in a rack on a…
I recently received a smallrig cage for my Blackmagic 4K, it was second-hand and the seller hadn't included the fixing screws. The screws themselves were easy enough to get but this plate is custom to smallrig and seems difficult to get.…
Samsung T7 Holder for the Blackmagic Pocket Cinema Camera 4K (or really any camera with a tripod hole) Prints fine without supports, about 30% infill is fine. You'll need either a screw or a nut (1/4-20 UNC or 3/8-16 UNC) to attach it to…
Rackmount for 2 Microconverters (SDI<->HDMI Bidirectional)
Hi all, This is a little accessory that will allow you to mount a ¼ 20 UNC threaded insert to the top dovetail of Blackmagic Design's Cine Handle. In order for this to work, you'll need: M4 Threaded inserts no longer than 6.3mm, I Used…
Blackmagic Micro Studio Camera 4K G2 – Modular Handheld Camera Cage System I designed this camera cage system to turn the Blackmagic Design Micro Studio Camera 4K G2 into a compact, lightweight, modular handheld cinema camera rig. I love…
Adapter for a Neutrix Female XLR Plug to mount it on for example a Blackmagic PYXIS Tilta Cage
Ich habe hier einen Kühlschrankmagnet hergestellt, wo im Innerern ein Magnet komplett versteckt reingedruckt ist. (mit Druckpause) Der fertige Kühlschrankmagnet hat die Grösse 30 x 4mm. Der Magnet immer Inneren hat die Abmessungen 5,9 x…
mit 15 % füllung mit stützen und alle 20 layer einen farbwechsel gedruckt
Holder for Streamdeck XL on a Blackmagic Studio 8 ISO Video mixer.
Kühlschrankmagnet Kaiser-Wilhelms-Brücke WilhelmshavenKühlschrankmagnet Kaiser-Wilhelms-Brücke Wilhelmshaven Gedruck mit einem Anycubic Kobra 3 mit ACE Pro.
A snug light-weight holder for SDI Converter. For the BlackMagicDesign Mini Converter SDI Distribution. Strap it down and secure it with a tie band. No Velcro needed to gum up gear. Cradle helps keep a snug fit and also adds a port…
I needed a wall mount for a Blackmagic power supply. 25% Rectilinear 4 walls
Simple, sturdy screen cover for the Blackmagic Design Video Assist 7" (non 12G, the old one without tally light) Printed on Prusa Core One+ with 0,6mm HF nozzle @ 0,25mm layer height in Glimmer Pink PLA+ from Filament Unger
Würfelstecker Dichtung für Hydraulikmagnetventil gedruckt aus TPU
I recently found out the LCD screen on one of my OG’s was damaged in transport and is now bruised. Well, I won’t let that happen to my other OG. I designed this screen cap. You can add the magnets and it attaches to the Kinotehnik frame…
Top mount for various accessories, I made an SSD holder for the Adata SD810. M3 screwholes are spread out 1cm apart from each other in a grid. SSD holder printed in TPU so it grips well, use a 22mm M3 screw and a nut, use countersunk…
Blackmagic UltraStudio Mini Recorder 12G Wall and SKADIS Mount Mount the UltraStudio Mini Recorder 12G on a wall or SKADIS-style pegboard while supporting the connected cable beside the device. Need a custom part for your setup? I design…
Staubschutzkappe Hydraulikmagnetventil
Kühlschrankmagnet der Orgel in der Apostel-Johannes-Kirche in Altengroden (Wilhelmshaven) Anlässlich des 70. Jubiläum. Gedruck mit einem Anycubic Kobra 3 mit ACE Pro.
Clip on cover for the super bright flashing lights around the drives on the Blackmagic Cloud Dock.
Dieser Star Trek Kühlschrankmagnet ist schnell und einfach zu drucken . Um maximale Flexibilität zu bieten, sind Aussparungen für zwei verschiedene Magnetgrößen integriert: 8 mm x 2 mm 6 mm x 2 mm Tipp: Wenn eine besonders starke…
Add a bit of professionalism with Blackmagic Design Mini Converter installation. STL has support wings to eliminate supports. Additional hardware: Uses durable din mounting plate x1 Flat head #6 7/16 counter sunk machine screw x2 #6 speed…
