Counting matching models…
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Keksausstecher für Ostern (Osterhase + Ei) Cookie Cutters for Eastern (Bunny + Egg)
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Makes an umbrella shaped cookie
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
This holder is designed to store all ingredients of the “Quacksalber Von Quedlinburg Base Game”, except for the 4 sets of starter ingredients (20x white 1, 10x white 2, 4x white 3, 4x green 1, 4x orange 1). Images show the layout as well…
Print approx. €5.87–€7.17 excl. taxPreliminary estimate for one variant
The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…
A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…
Easy to use mini hacksaw, No screws needed only a gentle push
Garage Set 8 : Handle for hacksaw blade Update : U1 : Screw with little head U2 : Nex Gcode and print successfully Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…
This is the way Print instructions Find out how to build your own Darksaber using 3D printed parts and electronics from Adafruit! This features motion-activated lights and sounds using the PropMaker Wing. It also uses BLE to wirelessly…
I like my homemade MFT, but I am tired of the parf dogbench clips. I liked Tamar's design for the 3d printed tracksaw hinge (linked below), but it is expensive (plus one needs to add international shipping). I decided to give it a try. My…
We created this little duffle bag buckle for individual use. Holds very stable and tight. Watch the video! https://www.youtube.com/shorts/DLxIzBYfSyA You can print it, scale it, whatever… The standard size is designed for 25mm wide straps…
This is a hacksaw handle that accepts a standard 12mm / 1/2 inch wide metal hacksaw blade. It's very useful to get into small spaces and for flush cutoffs. Last but not least it allows to recycle broken or partially worn blades. Mount the…
This is a collapsing darksaber I designed based on the darksaber from the star war universe! It prints in 5 pieces, with the 3 blade pieces designed to be printed in vase mode. To assemble simply place the blade pieces in one after…
This is my version of a 3D printed Milwaukee Packout insert that will hold the Milwaukee M12 Hacksaw. I used the Milwaukee Packout Compact Organizer insert designed by @ChadBaker_317227,…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree Supports on build plate only Partially…
Remix of Prateek Rs square. Adjusted for a tighter fit to my Makita & Batavia tracks. Removed slopes and larger roundings for easier upright printing. Added versions that leave space to clamp down the tracks.
20230322 ： new version has been updated. At first , the knbob is from Here , and thanks Yurshevich They are the perfect substitute for the original ALL the models are for studying only. BOM： Square head bolts M6*20 x2 Nuts M6 x2 Print：…
Nothing special about the print. Print large side down. You can choose to print either with our without the logo.
The Darksaber! As seen and inspired by its appearance in The Mandalorian. I have previously made the Rebels appearance of this legendary lightsaber, but I have yet to tackle its live-action counterpart. When I approached the Rebels…
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
Dust cover for the Makita sp6000 corded track saw There is a version for hard plastik and also a version for TPU and other flexible materiel Both just snap in place Print settings PLA Layer Hight: 0.2 mm Infill: 20 % perimeters: 2 layers…
I found a shaper file of an overhead ceiling-mounted track holder that I liked, but since I do not have a shaper I adapted it for a 3D printer. I made the model for both the Festool rail and Makita one, Makita one being a bit longer.…
🧙 Moderner Wichtel Keksausstecher Ein moderner, stilvoller Wichtel-Keksausstecher für die Weihnachtszeit! Perfekt geeignet zum Ausstechen von Teig – der klare Kontur-Look sorgt für schöne, detailreiche Ergebnisse. 🧁 Merkmale: Modernes…
This Hacksaw Handle (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version doesn't require heat-set brass inserts or a soldering iron to install them. Instead, the female threads are printed in the handle…
A 2mm thick cover for the Digitakt (it probably fits the Digitone as well). It can be kept in place with a strap. I personaly use it with a amazonbasics gopro bag (L) :…
This is a model of a backpack in order to transform the Lucky13 actionfigure into a soldier. It's a remix of the part “00B03 skin chest 1.stl” from soozafone 's “LUCKY 13 Printable Jointed Figure” Check my profile, there will be a post…
This is a remix of falk.rose's backpack for the Lucky 13 figure by soozafone. I gave the rucksack a more defined shape and added some more detail to use with the display base. Remixed/redesigned using Autodesk 3DS Max 2023 Sliced in Cura…
This is an Add-On Blade attachment to go hand in hand with the original split by color Darksaber design by UnimatrixRed. This file is modeled to go in place of the “Emitter Tip” from UnimatrixRed's original design so that you can have a…
Model ist ca. 7cm hoch. Funktioniert gut, kleiner würde ich aber nicht drucken, die Wandstärken sind etwas knapp und zum Ausstechen hin werden sie kleiner. Gedruckt in PETG, Schichthöhe 0,15mm
This Hacksaw Handle With Guard (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it doesn't require heat-set brass inserts or a soldering iron…
A simple modification adds a referencing edge to support the tool and track better.
Beautiful cookie cutter
Kurzbeschreibung Stylisher Wichtel-Ausstecher mit weichen, teigfreundlichen Konturen – keine engen Zwischenräume, saubere Kanten, super Griff 👍. Perfekt für Plätzchen zur Weihnachtszeit ✨. Maße: 44 mm × 70 mm × 15 mm Druckempfehlung 🖨…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was made by Dany Sánchez . One of the most recognizable architecture features from the region south of the Atlas Mountains of Morocco is the Amazigh Kasbah, Ksar, or ighrem . The…
I printed it with 80% of speed. Its really strong :)
I designed this because I lost my original one and think every toolbox should have one. This is made in two pieces with interlocking features to ensure both sides line up and the blade can’t ride up through the clamped faces when pressure…
Why I created this After 2-3 game sessions I spottet some wear on some tokens. To preserve a nice appereance of the tokens I created this protective shell / case. Print instructions Works best with a flat print surface (not textured).…
Three versions, one that makes is touch the wall and two deeper one that makes the shoehorn hang 5mm or 10mm further out from the wall.
Einfach zu drucken, kein Support notwendig Alternative Namen: Linzer Auge Linzeraugen Linzereye Linzereyes Cookie Cutter cookiecutter cookie cutters cookiecutters
I tweaked the Fusion 360 file from Adafruit and the Ruiz Brothers so that the entire project will fit on a Prusa i3 MK3 WITHOUT having to glue anything that wasn't glued in the original . This required shortening the handle, rotating the…
There are two models, 2.2mm and 1.8mm for the kerf width of common Festool tracksaw blades.
مرحبا بكم في تونس marhabaan bikum fi tunis Bienvenue en Tunisie! Wecome to Tunisia! A "ksar" is a fortified granary built by the Berber, a native ethnic group from Northern Africa. This one is modeled after Ksar Ouled Soltane , located in…
Größe um die 5 cm, skaliere dir deinen Keksausstecher nach deinen Wunsch! Frohes backen! 🍪🥯 mein anderes Kekse Set! Size around 5 cm, scale your cookie cutter to your liking! Happy baking! 🍪🥯 my other cookie set!
Tarre Vizsla's Darksaber! An ancient and unique lightsaber and symbol of power for the Mandalorians. Much like Kylo Ren's Lightsaber, I designed this hilt with more of the overall form in mind rather than how it would be broken apart to…
i reworked the design 3 times until i liked it, but my group thinks that the earlier versions are better. … So i uploaded all variants. You can decide for yourself. The main image was made with a 100 micron layer height. I suggest to…
Check the model here: https://a360.co/3GXgjM9 BOM: 3 x M4 x 10 mm 3 x Hex nut M4
🎄 Grinch Keksaustecher – Perfekt für Weihnachtsplätzchen! 🍪 ✨ Highlights Saubere Prägung & klare Konturen Optimiert für 3D-Druck (kein Support nötig) Getestet auf mehreren QIDI & Bambu Druckern Perfekt für Weihnachts-Backaktionen 🎅🦌 📌…
Here's my version of the Darksaber as seen throughout the Star Wars universe. To get it size accurate you should scale all the parts by 150%. I'll have build and painting instruction sometime soon. Be sure to post a make and check out my…
This is a strong hook supporting heavy backpacks and bags with more than 25kg. The hook was printed in wood filament and tested up to 30kg. The hook should be oriented on the print bed as shown in the picture. The design and the…
Hacksaw blade handle for 300mm metal saw blades (hacksaw). Print-in-place, efficient and heavy duty. Nothing extra needed. Everyone at my work had a hacksaw blade wrapped in tape in their toolbox. The tape handle was often inconvenient to…
These are 3D models of the Halo 3 Marine's rucksack that can be seen in the level Crow's Nest. They are game models that have been detailed in Blender. These are originally designed to be unfolded for pepakura/foam templates, hence why…
I recently was gifted a Makita DSP600 Tracksaw and bought the matching track for it. I watched a video of a guy (I think he slightly looks like Eminem :P) using some wooden rail extenders to evenly cut the splinter guard at start and end…
Some things need improvement, that I changed in f3D : - The track holder miss holes for M5 nuts => made it. - The rotation to more than 90°, I don(t measure it but probably 115% (see my page)
Summary The kuksa (in english apparently guksi) is a traditional drinking cup from northern Finland and Scandinavia.
This Hacksaw Handle With Guard is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it uses heat-set brass inserts to provide you with a tool that should last…
I made this cookie cutter as I haven't found any Koala one on the web … :-) Based on a Vector File by catalyststuff on Freepik.com
Habe mir eine Duspol Halterung für die Werkzeugtasche in verschiedenen Varianten erstellt. NEU!!!! Mit Kabelhalterung seitlich oder von vorne (nur für festen Sitz). Ein Kollege hatte die Idee. Eine in dem der Duspol locker sitzt und eine…
The original design has a very nice feel in the hand, but I didn't understand the final assembly. This remix has 2 threaded holes for 2 M3x8 screws. One fits through the blade to ensure no slipping.
The Kreg Accu-Cut comes with a saw sled that does not grip the DeWalt DCS565 tight enough. With this print, the it's no longer wobbeling. Designed to align perfectly on the blue guide strip of the Accu-Cut (as the manual suggest, the…
Based upon the PETG Prusament Clamp. The clamp is obviously not as strong as the original Bosch FSN KZW. But it is significantly cheaper and still works well. I created two versions. The short version is less likely to break while…
Tape cutting sleeve for 50mm (2") wide tape rolls. Read reviews of PLA only versions that didn't do a good job a cutting the tape, so designed one with a serrated blade. Material : PLA Layer height : 0.20mm Supports : No * *Printed mine…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Dewalt Router Plate For Wen Tracksaw Adapts your Dewalt router to run on a Wen tracksaw track. Fits a Dewalt DW600 20v router. I also included a stop for limiting router travel. There are 2 versions: One locks in the track and the other…
Hiermit könnt Ihr Kekse in Otterform ausstechen :)
This is an abomination of Metric and SAE components. You know how it is, you work with what you have. Bar stock - 1in x 0.250in x L of your choosing Bar Screws - 1-/4-20 flat head 5/8in Push Knob screws - M6 Socket Head 20mm Clamp Screws…
This is an organizer for the board game Die Quacksalber von Quedlinburg: Das Duell or Quacks Duel (not sure about the English name). It is designed to be used on the table and to make setup/teardown much quicker! Vertical storage is also…
This saw handle is compatible with standard hacksaw blades that can be secured with an M4 nut. near the top of the grip. The saw is super comfy to use and surprisingly useful in many situations where the top bar of the normal hacksaw gets…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Full Scale, Full Detail Darksaber from the Star Wars Franchise. This is the post-Clone Wars model featured in Rebels, Ma
-PETG -No border -No support Print two model. 4 x M6 20mm 4 x wing nuts M6 After print : you need to lightly file the holes to easily fit the nuts
The Fusion 360 model has two new parameters: MaxAngle - How far the hinge will move from the flat position. PrintAngle - The angle of the rail support for printing. When you first free up the hinge after printing, it will tend to have…
English: I created this buckle for my Deuter backpack, because the original one was broken. It's only the female part, because the male part is still o.k.. If I find the time, I will maybe also create the male part. It is not an exact…
Fast and easy print. cookie cutter for Christmas cookies. Famous german Spitzbuben.
just added two more holes and the logo in the slicer and exported - all creds to original author
This is a modified version of the original "Rail Hinge for tracksaw and MFT-style table/workbench" made by @d_mg_305332
Allgemeine Beschreibung Dieses 3D-gedruckte Bauteil verwandelt jeden herkömmlichen Rucksack in eine mobile Fahrradtasche, die schnell und einfach an einem Gepäckträger befestigt werden kann. Die Halterung besteht aus fünf Einzelteilen:…
Compact dust cover for your Digi boxes. IMPORTANT NOTE: Before printing make some measurements to be sure which version you should print. The new Syntakt from 2023 has slightly different distance between knobs comparing to Digitone from…
Pila nemá bednu a není ji kam šikovně strčit. Navíc musí být ve vodorovné (víceméně) poloze, aby z ní netekl olej. Tak šla nakonec na zeď.
Hello friends from all over the world :) This is my contribution to the cookie cutter contest. In Germany, in the winter time there is this gingerbread mix, called “Herzen, Brezeln, Sterne" available in every grocery store. With these…
A cookie cutter shaped like a christian cross. Ein christliches Kreuz als Keksausstecher
I suggest printing the part in PETG, which is what I did. I believe PLA would be too shock-sensitive for a vacuum hose that gets dropped and knocked around. I printed with 0.3mm layers except where the notches are on the Festool end,…
A hacksaw frame that takes 6-inch "junior" hacksaw blades. Unlike full size 12-inch blades which have a hole at each end, the junior blades have a small pin at each end. In this design two M3 x 8mm socket head screws guide the blade and…
Cookie cutter for the logo of the German scout association VCP. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament: --- PLA Category: Household Supplies
Einfacher Clip, um den Insta360 Power Selfiestick (oder jeden anderen Selfie Stick mit 24mm Durchmesser) am Rucksack zu befestigen. Simple clip to attach the Insta360 Power Selfiestick (or any other selfie stick with a 24mm diameter) to a…
This is a Lego Darksaber from the mandalorian Category: Other
Ein kleiner Rabe Socke Keksausstecher, gedruckt in PETG Schichthöhe 0,15 mm. Kleiner würde ich nicht skalieren, Höhe ca. 7cm Die Wandstärke zum Ausstechen ist nur noch eine Linienbreite.
I created a simple adapter for the Parkside PHKSA 20-Li C4 AKU circular saw for use with a MAKITA guide rail. I am using the C4 generation of the saw, but the base will probably be the same for older versions. I recommend printing on a…
The idea I love the beautiful and optimized shape of the engine cladding of a modern commercial aircraft. I also love the beautiful and optimized shape of a "Kuksa", a traditional Nordic handmade wooden cup. What could be more obvious…
Simple print that takes an hour on my Ender at regular quality. print large side down, no supports etc. step file is included if you want to make adjustments for your particular use case. not much else to say really.
I figured after the first few models I did remixes to I need an original design. So to stick with the theme of Mandalorian I though we have to have the darksaber. So my first model ended up being just that. So please keep in mind this is…
Größe um die 5 cm, skaliere dir deinen Keksausstecher nach deinen Wunsch! Frohes backen! 🍪🥯 sieh dir auch mein anderes Kekse 6er Set an! Size around 5 cm, scale your cookie cutter to your liking! Happy baking! 🍪🥯 also look at my other…
A saw blade holder for most common hacksaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting and removing the…
A cutter for two layer cookies.
Modified version of cBoLsmUiEc Darksaber on Makerworld to be used with Prusa Slicer. import the 3mf as project into Prusa Slicer so the handle and blade will print with the connector / hole as an alternative you can also use the provided…
Der Teig muss min. 5 mm dick sein.
Hacksaw Katana Handle for conventional hacksaw blade. A hacksaw cannot cut more than the width of the frame, but with a side handle, it can cut as long as a saw. The hacksaw blade will break if pushed too hard, but if used with care, it…
