214 models
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
This works now with an iPad Pro 10.5" (might also work with an iPad Air 2nd gen). It is a tight fit (especially if you try to slide it on on the camera side) but it shouldn't lose in the car. I recreated it as an one part print (you need…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
Diesmal etwas völlig anderes: Keksausstecher für Doppelkekse oder Weihnachtsplätzchen. Er besteht aus 4+1 Teilen: A-D werden zusammengesteckt, E dient zum Auswerfen der angesammelten “MIttelteile” , also zum reinigen. Die Teile sind also…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
Kruidenpotje van Verstegen vind je overal. Handige potjes met de naam van het kruid goed zichtbaar op de zijkant. Voor de verschillende kruiden zijn er verschillende deksels, met grotere of met kleinere strooiopening. Dit nieuwe dekseltje…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I have lost one of the foot ends of my chair. I did not find any model of foot end of LYCKSELE Ikea chair. So I made a model and it fit very well on the chair. I printed it from PETG, but with more perimeters it can also be printed with…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
ANSI/BHME 120 calls for a 2⅜” backset. I’ll post a link to a variant with a 2¾” backset later.
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
This container helps me to transport my 3 cookies. I often only put 2 inside and enough sugarcubes for the coffee at my work. It is designed for 3 cookies with 70mm diameter and 15mm hight each. I printed it with: 2 bottomlayer 3…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
just a little cover up for the removal of the back seat bar
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
For older Chevy Suburbans with those spring-loaded push latches on the backside of the rear seats. Do not print in PLA. PETG or ABS/ASA would be best. Fusion 360 CAD files included.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Grandpa UP Valentine Love Heart Balloons Carl Fredricksen For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or…
Gauges for setting the radius of N scale track. Short enough to print on most i3 style printers. If you would like additional radii, please reach out and let me know, and I can create them quickly, by altering the model parameters.
Combo decoder for Schlage and Kwikset keys. Print in 0.2mm layer height so you get 2 layers on the letters on top. I've included a file that has the color change height already set, but it's at 2.0mm if you wanna do it yourself.
On an FDM printer this one should be able to be printed without supports :)
Der Opel Rocks-E und der Citroen Ami haben das Problem, dass es im Winter recht zugig ist. Der Fahrtwind sammelt sich in der Türgriffmulde und zieht durch das Schloss in die Tür. An der Lasche zum Schließen der Tür ist eine Öffnung. Dort…
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
Gauges for setting the radius of HO scale track. Short enough to print on most i3 style printers. If you would like additional radii, please reach out and let me know, and I can create them quickly, by altering the model parameters.
The mini adventure Lost Mines of Phandelver includes a Dwarf named "Gundren Rockseeker". I found that he wasn't on Thingiverse so I wanted to create a model of him to fill that gap. He's a pretty basic NPC dwarf that gives out quests at…
You can mod it to any other use, or to fit better in your car. Mine is Ford Kuga/Escape, but it is standardized interface, so it should fit in a lot of others. Just one note: slicer defaults to hiding the seam inside the hook, which is…
Introducing the ultimate solution for backseat boredom and mess! Backseat Foldable Table is the perfect accessory for any car, designed by me as a work in progress and research and development project. With its portable and easy-to-print…
This umbrella hook can hold up to two umbrellas on the back of your backseats in the car's trunk. Just make sure there are those tether points in your car (see photos), I think they are standardized - at least in Germany / Europe. Just…
The newest Mattel Pixar Cars track sets (2023+) use a redesigned road connector piece. The new design has smaller connectors (which are easier to connector/disconnect) and all road pieces have attach points on the sides to connect…
Each part is easy to replace and relatively fast to print. The entire thing only uses ~60g of filament. A bunch of other cheap jigs are plastic but you can't replace parts that wear out from touching the drill bit. The center gear as well…
This is a customizable 5-pin Kwikset KW1 key with label. Based off of nrp's design Open the .scad file with OpenSCAD and use the parameters on the right side to enter the coding
Update (Aug 02, 2022): v1.3 Resized to fit better with most Kwikset-pattern keys. Update (Jan 15, 2022): I've made some minor tweaks to the model and added an updated the Fusion 360 file where you can alter the text label (the second…
This bicycle chain/crankset cover guard works on any bike whose screws are squarely located 100mm apart from one another. I use it on a Specialized Rockhopper 29.
A Wall Art dedicated to the touching character Carl Fredricksen, from Up (Pixar). I used a children's coloring to create that model.
This is a replacement for the backseat clip of Audi A4 B5. I didn't find the part number for it. Maybe some edits could be done to improve it, but so far it works fine for me. Comes with .stp and .stl Printed with Ender 3 V2 Print…
This is a lockset installation jig very similar to what you can buy from Dewalt. It's designed for a 2-3/8" backset and gives you the exact location of the holes to drill. It also has a small indicator window to line up the correct height…
Der seitliche Befestigungsclip der Abstützung war leider gebrochen, ich habe es als Ersatzteil nachgebaut. The clip of the side Loop Support was broken, with the modell its easy to replace it.
A tissue box with a flap to be fixed in the pocket of a car seat. I wanted a tissue box that wouldn't move when turning, accelerating or braking and that could be reached from any place within the car. Yes, it's easy to reach from the…
I designed this crank ring protector for my Torpado MTB Chiron 27,5'' as the original part broke. The distance between the screw holes is 88mm, so check your bike for compatibility. So many bikes have the chainring guard protector missing…
A wall mountable chisel holder. Use two screws to secure it to a wall or object. Two versions are available, one with markings indicating 1", ¾", ½" and ¼" chisels; the other has no markings. Designed specifically for KSEIBI chisels, but…
I couldn't find a replacement to order, or one that was already created for a 3D print, so here is my very first personally designed print. There are some negative spaces that appear as extra cubes in the render on this page, but should…
From the original author: A stylish key cover that turns any key into an electric guitar. Remixed for standard Kwikset K1 Keys
This is a tool used to rekey a Kwikset Smartkey lock that you do not have a working key for. It works by depressing the five sliders simultaneously which then allows you to turn the cylinder a quarter turn. You can then use the Kwikset…
Hi 3D printing friends! This is a ball joint that fits the Skip Hop Baby Backseat Car Mirror. The ball is larger and more sturdy than the one that comes with the mirror, and has the ability to tighten and clamp down on the ball so it…
I changed out my house's locks from Schlage to Kwikset and did not save the pack of adapters they included. Was able to remix a lock blank from Thingiverse (linked below) and create a working adapter. Printed in PLA+ with 100% infill.…
Traveling with children or passengers who crave entertainment on the go? Introducing this custom-designed 3D-printed holder for the Tesla Model Y and Model 3. Securely mount an iPad or phone using a magnet, ensuring the device is always…
This was designed to compliment the Pixar Cars Tracksets. The ends of this road piece are designed to connect to the ‘older’ tracksets with the thicker triangular connection arrows. The ‘newer’ tracksets have much smaller connection…
Youri Alekseïevitch Gagarine — Buste 🇫🇷 Description (FR) Ce buste représente Youri Alekseïevitch Gagarine , premier être humain à avoir voyagé dans l’espace et figure emblématique de la conquête spatiale. Le 12 avril 1961, à bord de la…
I designed this to fit my 5 screw bike, to be printed in 5 parts, since the whole won't fit on a Mini print bed. I used stainless M4 countersunk socket head screws and matching M4 nuts. The Onshape CAD drawing is parametric, so should be…
5-pin bump key for Kwikset KW1 lock cylinders, for locksport. Based on OpenSCAD code from https://www.thingiverse.com/thing:8925/files
These 4-way connectors were made for Mattel Pixar Cars track sets. There are two different models included here. One of them has the New (2023+) smaller track set connectors on all 4 sides. The other model has 2 adjacent sides with the…
Video Games - Metro 2033 - Artyom Alekseyevich Chyornyj - 2010 3D printable model.
I recommend PETG, but I didn't have any black PETG on hand so I printed it in PLA and it works. If it breaks, deforms I'll reprint in PETG.
Een deksel voor reeds geopende verpakking van Danio Romige Kwark. Designed with Fusion 360. I printed it with PETG on a Prusa MK3. No support needed.
I had found a SC1 key holder but couldn't find one for a Kwikset KW1 so I decided to make one myself. Printed at .16mm or (Optimal Speed) in PrusaSlicer. Print came out with just the right tolerances.
!!Caution!! An experimental cutting procedure has been applied to this model. please test your initial output with a small figure size. Perform scaling in the scaling section of your slicing program; if you don't know how to do this, you…
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset. The holes for attaching the chainguard are 110mm and 120mm apart. You will need 4 around 5-8 mm long M4 screws with countersunk or very flat heads. I already printed…
Alfblind din FUGA vippekontakt uden at pille ved 230 V. Kræver at din ramme har indhak foroven, som vist på billedt herunder. Tekniskemonterings-rammer i 2½ og 3½ modul har ikke hakket. De gamle rammer har hakket. Eller konvertere en…
QuickSecure Wall Mount turns every install into a breeze, maker to maker. Print it flat and watch it shave hours off your build and kilos off your filament spool, all without skimping on strength. Those sturdy 2×5 mm lugs hold up to 35 kg…
My new CUES crank didn't come with a chainguard, this design fits just right. Feel free to adapt to more Cranksets, or let me know the hole spacing of the other CUES cranks! Designed around the cheap heatset inserts, files provided for M4…
Wanted an organizer that fit the entire KSE + Sand & Wind Expansion set with sleeved cards and had a way to display the enamel pin. Everything fits into the box with relatively small tolerances and displays items neatly (though admittedly…
I gout a touring bike that i use for daily commute. It is comfy and quick but few times I got stain on my jeans. I removed the original plastic piece and designed this. Warning: If you remove the original plastic peice from the crankset,…
Model Information After removing the backseats from our newly purchased Ford Tourneo Custom, I realized that Ford hasn't provided a cover to protect the socket hole in the floor from debris and potential damage. Even though the connector…
Need supports and needs string. How long the string is depends on how big your car seat head is. *DOES NOT WORK ON NINTENDO SWITCH LITES!!!
peça para apertar parafuso e rolamento da pedaleira tipo bb51 Ainda não foi impressa a peça english version (google translate) piece to tighten screw and bearing bracket bb51 It has not yet been printed piece Category: Hand Tools
Ausstechform für Kekse in Form eines MK3. Gedruckt mit PLA 0,3 mm Infill 15% Wenn es euch gefällt, lasst mir bitte ein Like da.
Modelname says everything. I designed a Poop Box for the Qidi Max 4, like the design idea most know from different Printers. On the backside of the printer, use the 2 original screws on the lower side from the exit, to mount the frame.…
Background : My office door has a rather old Kwickset doorknob which recently broke. I immediately opened it up and found the plastic core had cracked so I ran to fusion 360 and managed to recreate the original core. I beefed up the walls…
This is a removable lockout key for Kwikset keyways. Please use it carefully and legally. Do not use it if you don't understand it. Use it only on locks you own. I made the lower blade as thin as I thought wise. It can still be hard to…
The hinge from my Ikea LYCKSELE sofa-bed broke so I designed it for repair. Size is roughly good but I had to scratch a little bit of plastic due to hole in metal frame that was not deburred inside. I printed it with PLA for test then…
A single mirror is only sufficient for two toddlers on the backseat when it centered. That's possible using this model. Needs M4 nuts and bolts for fastening, as well as a plastic pipe. To be printed from sufficiently heat resistant…
Crankset keychain modelled off a 110BCD THM Clavicula crankset. 30% of life size. Paired with 25mm keyring in pictures.
This project from a few years ago solves several issues and could be easily modified for other tables or heights. the kids can no longer roll the couch table all over the living room the vacuum cleaner robot can now also clean under the…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 2 models: high quality and low poly. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
I have made this precise model of Kittenbot Geekservo 9g as i needed some special cover for it, share and enjoy Category: Electronics
Sortimentsbokse, 4 stk. Art. 71-815 https://www.biltema.dk/varktoj/varkstedsudstyr/sortimentskasser/sortimentsbokse-4-stk--2000041612
While not a remix of a design this was heavily influenced by Johnny_Tsunami version of the box insert. That can be located here - https://www.thingiverse.com/thing:5411665 . This fits all current expansions. From his basic design: I made…
Used to remove Kwikset cylinder, usually to change the key orientation. Other models I found were a bit oversized. Wanted the lettering and to practice CAD, etc… I don't need to explain myself, go away.
This is my beginning attempts at making a battery compartment for the Kevo series of Kwikset locks. My lock is Bluetooth and model 925 but it may fit others. (note, the black one in the pictures is the OEM compartment, the white one is…
I'm now selling these on my website! https://www.3dlocksport.com/products.php#!/Double-Deadbolt-Holder/p/158655713/category=39551008 This is a holder that you can insert 2 Kwikset deadbolts into. In mine, I actually changed the key pins…
Edit 2026-01-19: V3 with rotation feature. I've created a model of which you can rotate based per seat inclination. You can reuse an GoPro M5 thumb screw and a M5 nut to tighten the assembly. V2 model has a fixed angle. both models slide…
Diese Einschlaghilfe habe ich für die 41mm Federgabeln der Suzuki DR650 konstruiert. Sie kann natürlich auch für andere Hersteller und Modelle mit 41mm Gabelrohren verwendet werden. Ich empfehle es aus einem stabilen Material wie ABS/ASA…
Made fender for Ninebot Max Sharkset Rear suspension, because I didn't like the included assembly. This one covers whole wheel from top and even from sides, so it will catch almost all water splashes flying at you. Printed in 3 parts so…
Project: TreeBookSelf.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 153.68x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
I was looking for a way to keep my house key from scratching stuff in my pocket. I was inspired by kwfredeen's cover, but wanted something that “stayed” on, was easy to remove, and easy to tell which side went up. This cover features a…
Bike chain protection for crankset Prowheel Suolo 22/32/44Т.
iPad Holder for Tesla Backset. Printed in two pieces. Assembly with one screw and nut. The plate does need support. Remark: The model is modified without Tesla logo.
Replaces GM 88937926 This part is no longer available online. This print will replace the clip that breaks often.
Dies ist eine Halterung um eure Maker Base oder auch Flipsky Regler fest und sicher auf eine Holz Oberfläche zu Montieren. Es werden ledeglich zwei M4 Holzschrauben benötigt, der Regler selbst wird dann nur noch eingeklipst. Es wird…
A friend of mine was looking for a new “Schocken” Set, but i couldn't find one with the right measurements in the web. So i took his old one andmade one with freeCAD. I made the stand in 3 parts, because i was not able to print it in one…
This allows a Kwikset Smartkey lock to be easily mounted into a vise. The cutaway model provides an opening to the top of the sliders for easier learning of this lock.
Can effectively prevent dust, dirt and rain water into the hole to get rusty. Size: 27mm x 8mm Inner diameter: 20mm
decathlon not have parts for theyown stuffs so i print my own guard. Ref. : 968556 Square-shaft transmission, 7-9 speeds
Designed to be printed with TPU. DO NOT PRINT IN PLA, EVER!. PETG might also work in a pinch, although has a high risk of breaking. I used Esun eTPU 95A, which has been working perfectly fine for over 3 years. After printing, connect via…
I've got several of these Kwikset smart door locks around my house for a number of years. They generally work pretty well but the summer months can play havoc with them. During summer the 70%+ humidity swells doors, frames etc and can…
The current model of the side cover that sharkset has released is not the most recent one. I physically scanned the ones mine came with on a flatbed scanner, made vector art of it and imported into Fusion360. Extruded that SVG and we have…
Sharkset KICKSTAN SPACER SHARKSET is a registered brand of Wuxi Sharkset Technology Co., Ltd. We are specialized in the design and development of Electric Scooters and Modules for Scooter Tune-up. WWW.SHARKSET.COM [email protected]…
Simple chain catcher that prevents bicycle chain from falling inwards towards the bottom bracket. This was designed for a Look 795 Blade with a Shimano Ultegra R8000 derailleur and crankset, so you may have to modify the model to fit the…
I made this 3. Seat Cover for a good Friend. I like to share it with this awesome Community. Let me know your thoughts in the comments.
What this is Cover for the UWH50 box (hollewanddoos). IMPORTANT: Use at our own risk! This is not an electrical qualified product or part. Why I made it UWH50 box doesn't come with a lid to cover it, which I needed during reconstruction…
WIP-more Improvements to come decorative battery tiedown with area to put text or whatever in. Verified fitment on 8thgen Si and 9thgen Si this may fit other Kseries as well (unverified) Print Settings Printer Brand: Creality Printer:…
I was watching the show the the dimensions looked a bit off when compared to my first effort so I grabbed the logo and put it through fusion 360 to create this. The one with the tab fits a Lenovo Thinkstation/Thinkserver Category: Computer
I designed on solidworks and ı printed on the creality cr10smart pro. Bir Çok laptop ile uyumludur baskı almak için 30x30 tabla gerekiyor. How I Designed This Category: Parts
Garde-chaîne pour pédalier Shimano GRX FC-RX820-1 (38T à 50T) (Testé uniquement avec le modèle 40T) 31.05.2026 : Ajout des modèles de garde-chaînes pour 38T, 40T, 42T, 44T, 46T, 48T et 50T (nouvelle version) Paramètres d'impression : PLA…
Dies ist die eine Deckseite für den 1 m - Stein, um daraus einen oberen Steine einer Reihe zu machen. Dafür muss beim Zusammenbau der Gießform lediglich die Noppenplatte durch die Deckplatte ersetzt werden. Dann gibt es keine Noppen mehr.
Made to fit an 85 mm hole. Skal passe standard hullstørrelse brukt av norske elektrikere.
![Car backseat pocket tissue box [no support]](https://media.printables.com/media/prints/899783/images/6881255_0ab22e4a-f762-43b2-b208-0c8b3a4b9416_e869d577-32e7-4ced-83d9-48c062c9121b/pxl_20240526_0510354673.jpg)
