Search results: kyd

Sort order

Counting matching models…

P
Printablesoliverschebesta

angled SKYDRAG mount

angled mount for IKEA's SKYDRAG lamp

Downloads
63
Likes
8
Rating
5
P
PrintablesJDPrints

Imalent LD70 Mini Kydex and Molle Mount

Cut the karibiner loop off and slapped on some molle connections so you can carry your flashlight on your molle rig. Alternatively, I made a rig to attach to a safariland leg shroud or other kydex sheath. The flashlight fits a certain way…

Downloads
8
Likes
2
Rating
0
P
PrintablesTaylor

QUICK-CLIP : Kydex Sheath Mounting Clips

NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy Tools Needed: Deburring Tool and Small Needle-Nose Pliers Introduction & Instructions: QUICK-CLIP is a versatile mounting system…

Downloads
1,073
Likes
377
Rating
5
P
Printablesdtxtr

Fake Kydex: Folded Universal Sheath for Victorinox Fruit Knife

Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…

Downloads
907
Likes
183
Rating
4.78
P
PrintablesPrintedByMark

Skydrifter from Horizon Forbidden West

Skydrifters! Two unique poses are provided. Both are integrated with their bases and are intended to be printed in one piece. I had good success printing the flying version with the base attached to the build plate and using mostly…

Downloads
430
Likes
88
Rating
0
P
PrintablesAustin Lively

Kydex Style Mag Retention Inserts

Quick printed version of the kydex AR mag inserts you'll find in nicer pouches. If printed in PLA they will creep over time, but I've found the retention to still be pretty reliable over time. Obviously higher temp resistance materials…

Downloads
397
Likes
29
Rating
5
P
PrintablesNinomalbinho

Skydiver Wall Art #1

A great wall art of a skydiver. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker

Downloads
371
Likes
42
Rating
0
P
PrintablesPurrfect3D

Prusa MK4/MK4S Snap-On Light Mount for IKEA SKYDRAG/SILVERGLANS

Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…

Downloads
329
Likes
172
Rating
4.86
P
PrintablesJaroslav Klaus

Kydex pocket clip

Pocket clip that attaches to a kydex sheath

Downloads
329
Likes
33
Rating
0
P
PrintablesAkash

Skydive Squadron Wall Art

Note : Use double sided tape to stick on the wall. Dive into action with our Skydive Squadron Wall Art, meticulously crafted to bring a piece of the adrenaline-packed PUBG universe into your space. This 3D model showcases a detailed scene…

Downloads
318
Likes
113
Rating
0
P
PrintablesMirkoFerronato

Cookie G3 skydiving Helmet scanned from real by POP2 - L size

Size L This is a rough 3D scan of the popular Cookie G3 skydiving helmet , created using the POP2 3D scanner. While it’s not highly detailed, the model is ideal for size and shape references when designing custom accessories, camera…

Downloads
266
Likes
6
Rating
0

IKEA SKYDRAG LED Light Bar Prusa i3 MK2/MK3

This is an IKEA SKYDRAG LED Light Bar Holder for the Prusa i3 MK2/S and MK3/S/+. Lamp used: SKYDRAG Size 40cm https://www.ikea.com/de/de/p/skydrag-led-lichtleiste-arbpl-klschr-sensor-dimmbar-anthrazit-90439628/ 904.396.28 The cool thing…

Downloads
243
Likes
63
Rating
4.6
P
PrintablesStigern

Skydiver Gnome

Skydiver Gnome – Ready to Drop into Your Garden! 🪂🧙♂ This fearless little gnome isn’t your average garden dweller — he’s geared up, strapped in, and ready to jump! Few supports are needed. I used organic-style supports, which peeled off…

Downloads
229
Likes
39
Rating
4
P
PrintablesReferentiel

Skydrag IKEA Led MK4 / MK4S

Add IKEA LED Skydrag on your MK4/MK4S with a nice integrated design ! Ikea Led : SKYDRAG bag lumin LED av capt plan trav/arm, intensité lumineuse réglable anthracite, 40 cm - IKEA

Downloads
197
Likes
130
Rating
5
P
PrintablesKR Design

Redukcie Beskyd Sport Škoda 120

Redukcie Beskyd Sport zrkadiel pre originál rozteč. Škoda 105 120 130 135 136 Materiál : ASA275 Flex pre podložku Montážny materiál: Matice a skrutky M4.

Downloads
170
Likes
9
Rating
5
P
PrintablesBastien Stefani

Skydiving helmet gopro antisnag support

Hello guys, While in lockdown I decided to design my own antisnag Gopro support for my Tonfly performer helmet. For now the result seems to work as intended but was not yet tested, so print & use with caution and at your own risks. Fits…

Downloads
167
Likes
6
Rating
0
P
PrintablesEvgen Orlovsky

Skydiver keychain

Simple skydiver keychain

Downloads
130
Likes
11
Rating
0
P
PrintablesAuamarto

Curve jig for kydex holster

Simple Jig to form curve part of Kydex holster. Just put any gun on top. Printed 0,2 in PETG 4 walls and 40% infill.

Downloads
121
Likes
10
Rating
0
P
PrintablesSkydiveMann

Alti 2 N3 or Atlas Skydiving Altimeter TPU Sew on Mount

A mount to attach your N3 or Atlas to wrist band, suit arms, swoop shorts or anywhere else you want it. Simply sew through the tpu, recommend a heavy duty sewing machine for ease but can be done by hand. If you struggle you can melt holes…

Downloads
120
Likes
4
Rating
0
P
Printablesstephen.briggs

IKEA Skydrag Mount

Basic Mount the the IKEA Skydrag LED Light bar. Can be used to create your own mounts.

Downloads
118
Likes
16
Rating
5
P
PrintablesTenz

Skybean Skydrop risers holder

Risers holder for Skybean skydrop variometer. Fix it with two fastener as the original one, and add a piece of velcro. Printed with Prusa Mini 0.2 or better 0.15 mm. PETG

Downloads
110
Likes
5
Rating
0
P
PrintablesPapa Boojum

Storm Giant - Skydread

This model is inspired by a non player character from a private campaign. This Storm Giant is Skydread. NOTE: This model was designed for - and only test-printed on - my 4K SLA printer.

Downloads
98
Likes
12
Rating
0
P
Printablesink

Printed Kydex for Victorinox Tomato & Table Knife

MAYBE using Supports for. What can I say? I saw this cool fake Kydex sheath for the Victorinox food knives from dtxtr [1] and really wanted the same thing for the tomato knife. Using a lighter to heat up the folding line. Take a look at…

Downloads
91
Likes
18
Rating
4.5
P
PrintablesStoneRiver

Kydex clip

Initially, I experimented with different clips to discover a concealed carry option. While the standard clip was acceptable, I found it too deeply situated. The subsequent version allows for a higher carry, and my current favorite, the…

Downloads
88
Likes
8
Rating
0
P
PrintablesMichal
Downloads
86
Likes
11
Rating
5
P
PrintablesAmmocan

Kydex OWB holster belt loop

simple belt loop for kydex outside the waist holsters (OWB). Hole centered at 2.625" which is most common. If you have an issue with scaling in Cura, I size it to 81mm on the X axis with uniform scaling for proper size. Printed with PLA+…

Downloads
85
Likes
6
Rating
0
P
PrintablesKR Design

Držiak Beskyd Sport Zrkadiel

Material: Pet-G/ ASA 275 Gumenné podložky: Flexi Jednotlivé diely sú zameniteľné s original dielmi “repliky”. Zopár dielov je modernizovaných voči originálu použitím spojovacieho materiálu.

Downloads
84
Likes
7
Rating
0
P
Printablesstephen.briggs

IKEA Skydrag Skadis Mounts

Mounts for the IKEA Skydrag 18" LED light bar to attach to the IKEA Skadis Peg board

Downloads
79
Likes
23
Rating
4
P
PrintablesPrintVision

HMS Skydrift

The HMS Skydrift is a stylish retro zeppelin model, ideal for aviation lovers, steampunk displays, or as a unique shelf decoration. With a finely modeled gondola, ribbed hull, and embossed HMS lettering, this airship brings nostalgic…

Downloads
78
Likes
7
Rating
0
P
Printablespsz92

Prusa MK4 IKEA Skydrag LED Light

I wanted to add a light bar to the Prusa MK4. As the IKEA Skydrag/Silverglans LED Light is available also in black, I decided to go with it instead of popular MITLED solution. Printed with PLA and 15% infill.

Downloads
78
Likes
26
Rating
5
P
Printablesmpbzh

IKEA SKYDRAG 45 degree adapter

This adapter allows you to mount any IKEA SKYDRAG LED strip rotated by 45°. Prints without supports on the flat side.

Downloads
74
Likes
14
Rating
0
P
Printableswc23

Kydex Holster Inside Waistband Clips

Four models to cover 1.5", 1.75", thick and thin belts. Printing in PETG is preferable, otherwise you might not be able to flex the clip enough to fit the screws into their holes.

Downloads
70
Likes
13
Rating
0
P
Printablespipo

Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar

Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…

Downloads
70
Likes
24
Rating
5
P
PrintablesURSUS

Fire Steel / Ferro Rod Mount Kydex

Fire Steel / Ferro Rod Mount for Kydex Knife Sheath with variable hole distance I printed mine out of TPU

Downloads
61
Likes
7
Rating
0
P
PrintablesTrail Features

Skydio 2 Beacon GoPro mount

Remixed v3bahumut's Skydio 2 Beacon mount to hold the beacon in the case more securely, also reinforced the mount point to provide more support for lateral movement. Notes: Print is designed to flex a bit to insert/remove the beacon, so…

Downloads
61
Likes
3
Rating
0
P
PrintablesGuZZLo

Light bar IKEA SKYDRAG

Removed hex pattern and added chamfers inside.

Downloads
57
Likes
9
Rating
5

Skydio 2 Propeller Guard POC

Do not attach more than one and do not use these while performing real flights. These are dangerous and can easily destroy your drone. They are being published for fit and obstacle avoidance testing. This POC can be used to test a…

Downloads
54
Likes
2
Rating
0
P
PrintablesDJMaxergy

PERGOLUX Pergola Skydance leaf guard

I have a pergola installed on my terrace and I'm living near the forest. That's why the holes for the drainage of the pergola are getting clogged. Therefor I made a quick design of a leaf guard which can be placed into the pergola's…

Downloads
53
Likes
3
Rating
0
P
PrintablesMirko

Sackimesser Belt Dangler for Kydex Sheath / Sacki Knife Schmiedeglut

General Info The Sackimesser from Schmiedeglut comes with a belt loop that is really good for carrying your knife at belt height. This does not work with a rucksack that has a hip belt. This dangler puts the knife lower on your belt,…

Downloads
51
Likes
9
Rating
0
P
PrintablesTomivol

Universelle Gürtelhalterung für Kydex Scheiden und Holster TEK-LOK kompatibel

Taktische Gürtelhalterung für diverse Kydex Scheiden bzw. Holster TEK-LOK kompatibel. Gürtelbreite bis 50mm Nach dem Druck die Schlaufenösen unter warmen Wasser leicht rund biegen, um sie an den Körper anzupassen. Die Variante A 2.0…

Downloads
50
Likes
7
Rating
0
P
Printablesduelago

Skydiver Altimeter Wall Clock

I just made my version of the classic altimeter used by skydivers. This is a prototype. Still waiting for my clockwork to show up from AliExpress. Print it with an AMS UPDATE: Added 4000 meter altimeter

Downloads
47
Likes
7
Rating
0
P
Printablesmoxtec

Prusa Bear IKEA SKYDRAG LED Light Bar

Prusa Bear IKEA SKYDRAG LED Light Bar Holder Lamp used: SKYDRAG Size 40cm https://www.ikea.com/de/de/p/skydrag-led-lichtleiste-arbpl-klschr-sensor-dimmbar-anthrazit-90439628/ 904.396.28 The Skydrag lightbar is operated with 24V 3.6W and…

Downloads
47
Likes
12
Rating
0
P
PrintablesScon

IKEA Skydrag Skadis Mounts for 24" light bar

Skadis mounting for IKEA Skydrag 24" light bar.

Downloads
46
Likes
10
Rating
0
P
Printableskimett

IKEA Skydrag bridgin mount

Needed to bridge multiple IKEA Skydrag for a 1m cabinet

Downloads
46
Likes
9
Rating
0
P
PrintablesSpiralOut

Kydex Standoff Jig

This jig allows you to create a standoff to attach to your Kydex knife sheath. This way you can get the belt clip centered rather than screwing it onto the rivets on the sides. This design was inspired by Jeremy from the Simple Little…

Downloads
45
Likes
11
Rating
0

Skydio 2 Light Guard

The Skydio 2 Light Guard is designed to allow your drone to carry anti-collision lighting allowing for improved visual line of sight. I recommend these as they are cheap drone lights → https://www.amazon.com/gp/product/B0B45NNDKB You can…

Downloads
42
Likes
4
Rating
0
P
Printablespipo

Prusa MK4/3 rear light bracket for IKEA Skydrag/Silverglans

Bracket for an additional light bar behind the frame which doesn't interfere with the original spool holder. Works with both IKEA Skydrag and Silverglans. Both are powered by 24V so theoretically can be powered by the MK4 power supply…

Downloads
41
Likes
7
Rating
5
P
PrintablesCayman3D

Springfield Echelon molding preparation set DIY kydex holster

This molding preparation set will greatly help you when making your own holster for Springfield Echelon. - You have to remove the disassembly lever - Safariland mounting/drilling template is included in the files - Retention plate comes…

Downloads
38
Likes
11
Rating
0
P
PrintablesNimbus

Skydio Gimbal Guard

This is a simplified version of Skydio's gimbal guard used to stabilize the drone's camera during transportation. When I bought my Skydio 2 used on eBay, it didn't have a gimbal guard to protect the drone's camera during transportation.…

Downloads
38
Likes
3
Rating
0
P
Printablesnilson_fx

IKEA Skydrag LED Mount

Spare part for IKEA Skydrag Mount that prints fast without supports. Happy printing and mounting.

Downloads
36
Likes
6
Rating
5
P
PrintablesBicyclerepairGM

Skydrag mount Original Prusa Enclosure

Altered the model to fit in our Prusa Enclosure. You can use the screws and bolts that come along with the prusa enclosure and bolt into the excisting holes. For the Skydrag to fit you will be needing 1 short side and 1 long side in…

Downloads
35
Likes
12
Rating
0
P
PrintablesKurt Dempsey

Suspender Hooks (Uplifters) Kydex Holes

I made the switch to suspenders and the pair of Hikers-Uplifters purchased were shorter than expected so i added about 5 to 10 mm worth of length as well as 5mm holes to attach a knife sheath to the hook.

Downloads
33
Likes
6
Rating
0
P
PrintablesMrBaumann

LED light bracket for IKEA Skydrag for Flsun SR profile

Designed this LED light bracket for a set of IKEA Skydrags for side mounting on the aluminium profile of my Flsun SR. Printed with: PLA 20% infill no supports when laying on the side Used 3 clips per Skydrag and it still works great.

Downloads
33
Likes
2
Rating
0
P
PrintablesGimker

Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar 14cm

Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…

Downloads
32
Likes
5
Rating
5
P
PrintablesMilkShake4829

Attachment for IKEA Skydrag Led light

I don't have yet eny project with 24V LED strips and instead to order LED strips and alluminium profile I just found 40 cm IKEA Skydrag Led assy with 3 meters of the cable. With that clip you can attach the LED light to any corner of the…

Downloads
30
Likes
7
Rating
0
P
PrintablesMarkuzzzi

IKEA Skydrag LED light brackets

This is a set of brackets / holders for the IKEA Skydrag LED light bar. I designed it to have the bars attached to the back of my desk, yielding indirect lighting. The brackets can be screwed directly into a tabletop. If you do not want…

Downloads
29
Likes
2
Rating
0
P
PrintablesFluid

Joint attachment for IKEA SKYDRAG LED lamp

Each IKEA SKYDRAG light fixture comes with two attachments which let it screw into a surface. However, if you want to place two lamps side-by-side, you end up having to screw each lamp individually, wasting space and making alignment more…

Downloads
28
Likes
3
Rating
0
P
Printablesdtxtr

Fake Kydex: Keychain Knife Sharpener (using Victorinox Knife Sharpener Blades)

This is a small conversion kit that uses the two hardened sharpening blades of the large Victorinox knife sharpener. The case gets printed flat and is folded by gently applying the lower (low temp) part of a lighter flame to the spine.…

Downloads
27
Likes
10
Rating
0
P
PrintablesTomivol

Universelle Gürtelhalterung für Kydex Scheiden und Holster TEK-LOK Kompatibel Var.B

Die Variante B 2.0 verfügt über verstärkte Gürtelösen.Nach dem Druck die Schlaufenösen unter warmen Wasser leicht rund biegen, um sie an den Körper anzupassen

Downloads
26
Likes
4
Rating
0
P
Printablesdenkz0ne

Wall Mount Hook for IKEA SOLSKYDD Speaker

SK: 3D tlačený náhradný držiak (háčik) pre reproduktor IKEA SOLSKYDD. Originálny háčik je síce súčasťou balenia, ale ak sa stratí alebo chceš ďalší, toto je rýchla a funkčná náhrada. Navrhnutý tak, aby zapadol do zadného otvoru a pevne…

Downloads
22
Likes
0
Rating
0
P
PrintablesDUMMY13Lab

Carbon 13 Skydiving Gear (rig, helmet and skysurf)

Does your Carbon 13 (M-Type) figure need an adrenaline rush? Then this skydiving gear is just what you need! Equip your figure with a rig (parachute not included), a helmet, and—if you really want to kick things up a notch—a skysurf…

Downloads
22
Likes
9
Rating
0
P
PrintablesGSVNoFixedAbode

Remarkables Skydive NZONE

This is from a Tandem Skydive with NZONE, Queenstown, NZ. Time to print your own souvenir! The topo map part of this comes from the LINZ 8m data, with the Tandem jump pair derived from https://www.thingiverse.com/thing:4169041 . Scale is…

Downloads
21
Likes
2
Rating
0

FPV Camera, Garmin Adapters for DJI/Skydio, Hot Shoe Microphone

First, there is a basic FPV Camera mount for you to use on a cheap scooter helmet. This will allow you to capture POV footage from a phone, gopro or even a mirrorless camera (FPV_Camera) Second, there is a HotShoe microphone mount which…

Downloads
19
Likes
3
Rating
0
P
PrintablesNod

IKEA SKYDRAG 25mm shelf mount

On a mount, there are spacings for felt stickers (chair floor protection stickers), so the mount fits softly and nicely. See pictures for details. I've tested the mounts with the 80mm light bar, so it should be ok for a shorter one. To…

Downloads
18
Likes
3
Rating
0
P
Printablesjamie

Planetary Resources Arkyd 100

UPDATED 5/30/2013 - Added optical tube extension rails, strengthened the "selfie cam" attachment point and improved the secondary mirror attachments. UPDATED 5/29/2013 - Added solar panels and fixed a few details to improve print quality.…

Downloads
17
Likes
1
Rating
0
P
PrintablesTTGeek

Window vent guard / fönsterventil skydd

A window vent guard (fönsterventil skydd) that prevents insects from entering the vent holes. Comes in length of 25.5cm and 29cm, and two variants for each length with different interior design. The space between the guard rails is 2mm,…

Downloads
17
Likes
4
Rating
0
P
PrintablesAlex2012

Ikea Skydrag mounts for screwing

Enhance the stability of your Ikea Skydrag lamps with this custom 3D-printed mount. Designed for a secure fit, the mount utilizes two 3.5mm screws to firmly anchor the lamp to your cabinet. Enjoy a hassle-free installation and peace of…

Downloads
16
Likes
0
Rating
0
P
PrintablesPaul Arden

IKEA Skydrag Magnet Mount

End cap pieces for the IKEA Skydrag linear shelf lights to allow magnets to be inserted either from the top or the side to allow non-destructive mounting of the lights. Uses the great mount geometry from @stephenbriggs_529843 as the base…

Downloads
15
Likes
1
Rating
0
P
PrintablesNerobotiko

IKEA Skydrag shelf mount brackets

Remix of Markuzzzi's IKEA Skydrag LED light brackets: https://www.printables.com/model/530174-ikea-skydrag-led-light-brackets Modified them so they mount nicely (I think) to a shelf. Also included a notch to tuck away the cable. Shelf in…

Downloads
15
Likes
5
Rating
0
P
PrintablesfreakyDude

Freakydruder HGX Lite 2.0 Extruder with filament sensors (optional)

Freakydruder HGX Lite 2.0 Extruder with Filament Sensors (optional) A tiny, high-performance extruder featuring a Sherpa-Mini-compatible mount, HGX Lite 2.0 gears, and an integrated toolhead sensor (optional). Note: This design has been…

Downloads
14
Likes
6
Rating
0
P
Printablestcies

IKEA Skydrag Wall Mount with Shade

Mount an 80cm Skydrag LED Strip in a way that optimally lights a working surface at the wall: Assumes the distance between working surface and light is the same as the depth of the working surface. In the above picture, the LED strip is…

Downloads
13
Likes
0
Rating
0
P
PrintablesGreg

Prusa MK4/MK4S Snap-On Light Mount for IKEA SKYDRAG/SILVERGLANS

Prusa MK4/MK4S Snap-On Light Mount for IKEA SKYDRAG/SILVERGLANS, smaller (10.5 - 12 inch version)

Downloads
13
Likes
0
Rating
0
P
PrintablesCNS

Cookie G3 Skydiving visor side clip

Looks awesome on a textured PEI plate Recommend printing PETG since its a functional part and you don't want it to risk cracking one wall on the bottom layer to make it look nice 6 wall loops elsewhere 85% infill Print face down so its a…

Downloads
13
Likes
0
Rating
0
P
PrintablesTigris

Skydeck Mini

Skydeck Mini is a portable radio transmitter designed around the internals of the Radiomaster Pocket and Walksnail VRX module. It is made to be as compact as possible, and as a result has some ergonomic compromises. Features include: 7"…

Downloads
11
Likes
5
Rating
0
P
PrintablesCesare Catitti

SKYDRAG z-support

Needed 2 support for the new ikea skydrag led bar(40cm) to put ontop of my prusa 3d printer. printed with PETG prusament on my prusa mk3 printer, nozzle 0,4 layer 0,2 3 wall infill 30% almost no support needed, just for the hexagon (see…

Downloads
11
Likes
2
Rating
0
P

Skydd till vaccumförpackare

Gjorde den med WeedoTina2

Downloads
11
Likes
1
Rating
0
P
Printablescvdveer

MK4S hex hole for skydrag

Print accoring to original Prusa instructions

Downloads
10
Likes
1
Rating
0
P
PrintablesAJtheking

Skydio 2 Mount for lights

Skydio 2 mount for lights to fly in the dark Credit to WriteCodeEveryday for making the original design

Downloads
9
Likes
1
Rating
0
P
PrintablesJames Mayor

SKYDRAG light mount for IKEA Skadis (SUMS)

Mount the Skydrag light on a Skadis board. Overhang is roughly 10 to 11 centimeters and the light is mounted at a 45 degree angle. Use the mounting parts that come with the package, but replace the tiny screws that come with the Skydrag…

Downloads
9
Likes
3
Rating
0
P
PrintablesJames Gurney

IKEA Skydrag 300mm mount for Original Prusa Enclosure

The 300mm length version of the IKEA Skydrag was on sale, so I bought a bunch of them. This is a very simple model which slides onto the end of the original mounts and then screws perfectly into the mount holes on any vertex of the…

Downloads
7
Likes
2
Rating
0
P
PrintablesRuckie

Skydrag Holder for Ikea Skadis

Keep your SKYDRAG organized and accessible with this custom 3D-printed holder designed to fit perfectly on the IKEA SKÅDIS pegboard system. This holder is precisely cut to the exact dimensions of the SKYDRAG device and angled at 45° to…

Downloads
7
Likes
0
Rating
0
P
PrintablesKenBob

KlickyDock

KlickyDock is an automatic docking system for the Klicky Probe, designed for the Voron Trident. A servo rotates the dock horizontally, moving it from a retracted position on the left to the docking position on the right when the probe…

Downloads
7
Likes
3
Rating
0
P
PrintablesLÿø

Skydrag lights

You bought as me a skydrag for your 3Dprinter, here is what you need

Downloads
5
Likes
1
Rating
0
P
PrintablesFMe_er

Ikea Skydrag LED-Light Monitorbracket

This is a simple bracket for the IKEA Skydrag LED-Bar that you can fit to a monitor stand with a diameter of 35 mm. I used two/three M3 screws and threads. Printed in PLA with variable infill: 15 % for the most part, bracket in the front…

Downloads
4
Likes
1
Rating
0
P
PrintablesM Reynolds

Skydio R10Battery Molle Mount

Skydio R10 drone battery Molle mount to attach spare batteries to a tactical vest or pack. The battery uses its own attachment spring clips similar to how it attached to the UAV. Simple print with no supports. Use six Wall Loop /…

Downloads
4
Likes
1
Rating
0
P
PrintablesAndy Forsberg

IKEA SKYDRAG to IKEA SKADIS brackets

These brackets are designed to hold IKEA SKYDRAG lights 20cm from IKEA SKADIS pegboards. There are various other nice SKYDRAG mounts on printables, but I wanted to have the lights extend farther over my work area. Use 6D678's excellent…

Downloads
4
Likes
4
Rating
0
P
PrintablesM Reynolds

Skydio R10 Spare Battery Mount (Screw Holes) for vehicle

Skydio R10 spare drone battery mount for securing in a vehicle, trunk locker, or other hard mounting point. Uses. two 0.75 inch #8 screws (Holes are 4mm in diameter and countersunk) No supports needed and print with six wall loops /…

Downloads
3
Likes
1
Rating
0
P
PrintablesM Reynolds

Skydio R10 Drone / Battery Tray

Skydio R10 drone tray for transporting the UAV and battery in a vehicle. This tray can be secured to a hard surface or attached using velcro. This tray is not meant to secure the drone for bumpy, overland travel. this is meant as a…

Downloads
3
Likes
1
Rating
0

Figurky pro deskovou hru "Zbojníci v Beskydech"

Vymodelování malých postaviček zbojníků ke vzdělávací deskové hře

Downloads
3
Likes
0
Rating
0
P
Printableserror on line 1

skydivers

in case you have a spare fan with a length of 60mm as well as a piece of acrylic tube with 60mm diameter let the five people fly and try to steer their altitude with your hand. 3d printing print the body without support since it is…

Downloads
2
Likes
0
Rating
0
P
Printablesmaxfagin

Skydio Drone Controller Wearable Desk Clamp

A clamp for mounting the Skydio 2 controller to this wearable desk , creating a hands-free way to manage your controller while having an accessible work surface for an iPad or checklists while flying. Posts on the clamp match the screw…

Downloads
2
Likes
2
Rating
0
P
PrintablesMarc

SkyBean SkyDrop Vario Case (Holder, Fastening)

A simple case for the SkyDrop vario. The case is attached to the harness with cable ties. Can be printed without support, use a brim.

Downloads
2
Likes
1
Rating
0
P
PrintablesStan de Waard

IKEA Skadis Skydrag mount for 60 cm en 20 degrees tilt

I've made a remix where the mounts are a 20 degrees tilt to get the light a bit further away. And i've lengthen the mount a bit so its more sturdy

Downloads
2
Likes
0
Rating
0
P
PrintablesM Reynolds

Skydio R10 Battery Molle Mount (BladeTech)

Skydio R10 drone battery Molle mount using the BladeTech system to attach spare batteries to a tactical vest or pack. The battery uses its own attachment spring clips similar to how it attached to the UAV. Simple print with no supports.…

Downloads
2
Likes
1
Rating
0
P
Printablesver1oren

Indoor Skydiving GoPro Net Mount

Overview I made this GoPro mount to record training sessions with my VFS team in the tunnel. In addition to the print, you'll need to buy or make a velcro cinch strap to hold the GoPro in the mount, and optionally the lid. The strap holes…

Downloads
2
Likes
0
Rating
0
P
PrintablesAndy Forsberg

IKEA Skydrag adapter

There are other nice Ikea Skydrag adapters on printables, but none seemed to have .step files for remixing. So I made one. .step and Solidworks maker .prt files are included for your remixing fun.

Downloads
2
Likes
0
Rating
0
P
PrintablesHipMusicMan

Skydio 2 Controller Housing (WIP)

I feel the original is bulky and doesn't hold devices securely at all.

Downloads
1
Likes
0
Rating
0

Sakrální stavby Beskyd

Studenti 3D vytvoří zmenšené makety kostelů, kaplí a bazilik z místa svého bydliště.

Downloads
1
Likes
0
Rating
0
P
Printables

Skydiver Wall Art #1

A great wall art of a skydiver. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker