Search results: l298

Counting matching models…

L298N Motor Drive

Model of L298N DC Motor Drive Controller Board Dual H Bridge

Downloads: 1,160
Likes: 12
Rating: 0

Printablesjcp

L298N Dual H-Bridge Motor Driver Controller Board Case

Protective, low-profile snap-fit case for the L298N Dual H-Bridge Motor Driver Controller Board . Both the top and base have port and pin header cutouts with an exposed heat sink. The base comes with dual side mounts and a central bottom…

Downloads: 594
Likes: 21
Rating: 5

Order a print of this model

PrintablesShmilCat

L298N Case with Zip-Tie closure and Screw holes for placement

L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics

Downloads: 454
Likes: 21
Rating: 5

Order a print of this model

PrintablesDani85

L298N module

3d model of L298N driver board

Downloads: 404
Likes: 4
Rating: 5

Order a print of this model

PrintablesAtom's Lab

L298N Case

This is a case for the generic L298N module. It has a slide on top, and openings to reach the terminals. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 300 Microns Infill: Doesn't matter Notes:…

Downloads: 249
Likes: 6
Rating: 0

Order a print of this model

PrintablesNebbish

Arduino UNO case with room for L298 motor shield

This is intended for holding an Arduino UNO with an L298 motor shield on top of it. The cover is a snap fit with access to the L298 connection screws. This was printed at .2mm layer in PLA.

Downloads: 170
Likes: 12
Rating: 0

Order a print of this model

PrintablesLordEvilFish3DP

L298N riser

A simple L298N riser, it raises the motor controller 5mm above the floor, it helps protect the controller from scratches. Dimensions (mm): 43 x 43 x 5 Average print time with 0.4mm nozzle 70 mm/s print speed 0.2 layer height = 25 minutes…

Downloads: 168
Likes: 5
Rating: 0

Order a print of this model

Printablesfirewolf8385

L298N Motor Driver Holder ORP

An ORP-Compatible holder for an L298N Motor Controller. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design rules,…

Downloads: 146
Likes: 8
Rating: 0

Order a print of this model

PrintablesDaystrom

L298N Spacer Mount

Recommend Printing in PETG or something with good heat tolerance considering the heatsink. Can be incorporated into existing 3D models, screwed, or glued in place. Optional mounting caps included in model.

Downloads: 141
Likes: 3
Rating: 0

Order a print of this model

Printablesbglasford1

L298N Mounting Plate

This mount has a minimum footprint, best suited for gluing down. Use four M3x4mm screws to hold the L298N board in place.

Downloads: 121
Likes: 2
Rating: 0

Order a print of this model

Printablesxwing

L298 Board support

Support for L298 bridges, single and double.

Downloads: 98
Likes: 3
Rating: 0

Order a print of this model

Printablesctheroux

L298D Motor Driver Mouning Plate

This is a mounting plate for the dual motor driver board that uses a L298D. They are widely available. This mounting plate serves three purposes: act as a spacer between the mounting surface and the board (4 mm) prevent scratching the…

Downloads: 95
Likes: 5
Rating: 0

Order a print of this model

PrintablesNotLikeALeafOnTheWind

Din Rail mount for L298N Motor Drive Controller Board

A din rail mount for an L298N Motor Drive Controller Board. The board we used: https://a.co/d/cqiP37h You will need to print a tab to lock this mount to the rail. It can be found at: https://www.thingiverse.com/thing:3401942 or…

Downloads: 93
Likes: 9
Rating: 0

Order a print of this model

PrintablesCryp7o

L298N H-Bridge motor driver mount

a screw / cable tie mount for an L298N H-Bridge motor driver

Downloads: 86
Likes: 5
Rating: 0

Order a print of this model

PrintablesAlien3D

L298 Dual H Bridge Motor Speed Controller Mount

Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml

Downloads: 85
Likes: 7
Rating: 0

Order a print of this model

Printablesctheroux

Solarbotics L298 Compact Motor Driver Mounting Plate

Solarbotics L298 Compact Motor Driver Mounting Plate. Bottom mounting holes are on 1/2" boundaries. Mounting post are 5 mm high. This thing is compatible with the Arduino Due Mounting Plate ( http://www.thingiverse.com/thing:127512 ) and…

Downloads: 71
Likes: 0
Rating: 5

Order a print of this model

PrintablesBrokenTooth Designs

L298N + ACS712

Places current sensor on top of L298N. Requires M3 x (35) or 40 screws

Downloads: 59
Likes: 7
Rating: 5

Order a print of this model

Printablesalexb

ESP32 & L298N Mounting Plate for OSWW (Open Source Watch Winder) – Mod/Upgrade

This project provides a custom mounting plate designed to securely attach an ESP32 (30-pin) , L298N motor driver , and a 15mm Rocker Switch (2-pin) to the OSWW (Open Source Watch Winder) . The plate is specifically tailored to fit the…

Downloads: 57
Likes: 5
Rating: 5

Order a print of this model

PrintablesCHÍ TOÀN

L298N-B-Green-Case

Case for L298N-B-Green module. it used for L298N-B-Green module only not fit with L298N-Red module.

Downloads: 56
Likes: 2
Rating: 0

Order a print of this model

PrintablesShmilCat

Mini L298N DC Motor Driver Case

NOTICE !!! - This is for the L298N Mini! not the regular driver. The case is closed by a zip tie and includes mounting holes the mini does not have the heatsinks, the screw connector or the enable input. however it is smaller (and…

Downloads: 52
Likes: 4
Rating: 0

Order a print of this model

PrintablesFrankWL

Arduino Montagerahmen für L298 Motortreiber-Platine

Arduino Montagerahmen für L298 Motortreiberplatine Print Settings Printer Brand: Anycubic Printer: Photon Resolution: 0,2mm Infill: 20% Filament: Anycubic PLA red Category: 3D Printing

Downloads: 51
Likes: 7
Rating: 0

Order a print of this model

PrintablesMath

DIN Rail Mount for L298N motor control driver / double H-bridge

This mount places the L298N motor controller on your DIN rail, saving you some space in your electronics assembly. It fits this motor controller board from e.g. Reichelt:…

Downloads: 48
Likes: 2
Rating: 0

Order a print of this model

PrintablesMichael Samblanet

Bestep L298N Housing

I have a L298N motor driver board that does not match the housing available on Printables, so I made my own housing. Board is labeled as a "Bestep" L298N" Consists of a main body + friction fit lit. While I added some ventilation slits,…

Downloads: 47
Likes: 2
Rating: 0

Order a print of this model

PrintablesCallmelee

Obtsacle Avoiding Robot using L298N

This is another version of the obstacle Avoidance robot using Arduino Board. all the files are printable, watch my video for making it, The video here: https://www.youtube.com/watch?v=v97VBkiN7e8&t=340s&ab_channel=LeeCuriosity It takes me…

Downloads: 43
Likes: 3
Rating: 0

Order a print of this model

Printablesfabse-hack

L298N Lego mount

L298N LEGO Mount Integrate your L298N motor driver seamlessly into your LEGO projects with this custom mount. Designed for compatibility with standard LEGO components, this mount provides a stable and reliable platform for your motor…

Downloads: 36
Likes: 4
Rating: 0

Order a print of this model

PrintablesChristopher Andrzejewski

DROK L298 Dual H Bridge Motor Controller Vented Case

Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…

Downloads: 33
Likes: 1
Rating: 0

Order a print of this model

PrintablesPEDRITO LOQUITO

Puente H L298N a escala 1:1

Este modelo no esta echo por mi: Creditos A Lemos

Downloads: 32
Likes: 2
Rating: 0

Order a print of this model

PrintablesShmilCat

Double L298N Case with Zip-Tie closure and Screw holes for placement

This is a case for 2 L298N boards, if you need two and don't want to use two separate cases :-) Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20% Notes: should print fine with any…

Downloads: 31
Likes: 0
Rating: 0

Order a print of this model

PrintablesKDM3Dmodels

L298 motor driver

This is for creating circuit diagrams in a 3D model

Downloads: 24
Likes: 5
Rating: 0

Order a print of this model

PrintablesAlex

L298 Module Bottom Cover

Clip-on bottom cover for a 44mmx44mm L298 module PCB. ✓ Prevents the module from scratching your desk. ✓ Enables you to place the module on conductive surfaces. ✓ Clip-on, no screws. The sample in the photos is printed in PLA, 0.2mm layer…

Downloads: 23
Likes: 2
Rating: 0

Order a print of this model

Printablesctheroux

Solarbotics L298 Compact Motor Driver Drilling and Mounting Plates

This thing contains a mounting plate and a drilling guide for the “Solarbotics L298 Compact Motor Driver”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting…

Downloads: 22
Likes: 2
Rating: 0

Order a print of this model

PrintablesOmer Droub

Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3

Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…

Downloads: 14
Likes: 5
Rating: 0

Order a print of this model

PrintablesSaleh Hasanli

L298N motor driver case

This is my first project that I make it can be inaccurate. You can tell what is wrong in model

Downloads: 14
Likes: 1
Rating: 0

Order a print of this model

PrintablesSaleh Hasanli

Updated L298N motor driver case

You can put your motor driver. Updates: L298N Logo, more curved edges, space for 2-sided tape

Downloads: 14
Likes: 2
Rating: 0

Order a print of this model

PrintablesChristopher Andrzejewski

New custom tray for rack supporting DROK L298 Dual H Bridge Motor Controller

Newly Updated** I love this raspberry pi rack made available from jonthemiller! I needed a tray that would support a DROK L298 Dual H Bridge Motor Controller and rebuilt it to support a L268 and amended ports. with ventilation. I have…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesSatzende

L298D Motor Driver Mouning Plate + esp32 mount

Kann mit https://www.printables.com/model/263841-smars-l-v01-arduino-mega verwendet werden. Bietet platz für ein ESP32 Wroom32 modul das Original stammt von https://www.printables.com/@ctheroux

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesOnur NEŞVAT

Stor Perde Motor Kutusu V5 — ESP-01 / L298N / JGY-370

Stor perdenin boncuk zincirini 12 V redüktörlü DC motorla hareket ettirmek için tasarlanmış, duvara monte bir motor ve elektronik kutusu. Gövde, sökülebilir ön kapak ve kasnak olmak üzere üç baskı parçasından oluşur. Zincir kılavuzu…

Downloads: 3
Likes: 1
Rating: 0

Order a print of this model

Printables