P
PrintablesDavide Bucci
L298N Motor Drive
Model of L298N DC Motor Drive Controller Board Dual H Bridge
- Pobrania
- 1160
- Polubienia
- 12
- Ocena
- 0
Wyniki wyszukiwania: l298
Liczymy pasujące modele…
P
Printablesjcp
L298N Dual H-Bridge Motor Driver Controller Board Case
Protective, low-profile snap-fit case for the L298N Dual H-Bridge Motor Driver Controller Board . Both the top and base have port and pin header cutouts with an exposed heat sink. The base comes with dual side mounts and a central bottom…
- Pobrania
- 594
- Polubienia
- 21
- Ocena
- 5
P
PrintablesShmilCat
L298N Case with Zip-Tie closure and Screw holes for placement
L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics
- Pobrania
- 454
- Polubienia
- 21
- Ocena
- 5
P
PrintablesAtom's Lab
L298N Case
This is a case for the generic L298N module. It has a slide on top, and openings to reach the terminals. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 300 Microns Infill: Doesn't matter Notes:…
- Pobrania
- 249
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNebbish
Arduino UNO case with room for L298 motor shield
This is intended for holding an Arduino UNO with an L298 motor shield on top of it. The cover is a snap fit with access to the L298 connection screws. This was printed at .2mm layer in PLA.
- Pobrania
- 170
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLordEvilFish3DP
L298N riser
A simple L298N riser, it raises the motor controller 5mm above the floor, it helps protect the controller from scratches. Dimensions (mm): 43 x 43 x 5 Average print time with 0.4mm nozzle 70 mm/s print speed 0.2 layer height = 25 minutes…
- Pobrania
- 168
- Polubienia
- 5
- Ocena
- 0
P
Printablesfirewolf8385
L298N Motor Driver Holder ORP
An ORP-Compatible holder for an L298N Motor Controller. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design rules,…
- Pobrania
- 146
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDaystrom
L298N Spacer Mount
Recommend Printing in PETG or something with good heat tolerance considering the heatsink. Can be incorporated into existing 3D models, screwed, or glued in place. Optional mounting caps included in model.
- Pobrania
- 141
- Polubienia
- 3
- Ocena
- 0
P
Printablesbglasford1
L298N Mounting Plate
This mount has a minimum footprint, best suited for gluing down. Use four M3x4mm screws to hold the L298N board in place.
- Pobrania
- 121
- Polubienia
- 2
- Ocena
- 0
P
Printablesxwing
L298 Board support
Support for L298 bridges, single and double.
- Pobrania
- 98
- Polubienia
- 3
- Ocena
- 0
P
Printablesctheroux
L298D Motor Driver Mouning Plate
This is a mounting plate for the dual motor driver board that uses a L298D. They are widely available. This mounting plate serves three purposes: act as a spacer between the mounting surface and the board (4 mm) prevent scratching the…
- Pobrania
- 95
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNotLikeALeafOnTheWind
Din Rail mount for L298N Motor Drive Controller Board
A din rail mount for an L298N Motor Drive Controller Board. The board we used: https://a.co/d/cqiP37h You will need to print a tab to lock this mount to the rail. It can be found at: https://www.thingiverse.com/thing:3401942 or…
- Pobrania
- 93
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCryp7o
L298N H-Bridge motor driver mount
a screw / cable tie mount for an L298N H-Bridge motor driver
- Pobrania
- 86
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAlien3D
L298 Dual H Bridge Motor Speed Controller Mount
Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 0
P
Printablesctheroux
Solarbotics L298 Compact Motor Driver Mounting Plate
Solarbotics L298 Compact Motor Driver Mounting Plate. Bottom mounting holes are on 1/2" boundaries. Mounting post are 5 mm high. This thing is compatible with the Arduino Due Mounting Plate ( http://www.thingiverse.com/thing:127512 ) and…
- Pobrania
- 71
- Polubienia
- 0
- Ocena
- 5
P
PrintablesBrokenTooth Designs
L298N + ACS712
Places current sensor on top of L298N. Requires M3 x (35) or 40 screws
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 5
P
Printablesalexb
ESP32 & L298N Mounting Plate for OSWW (Open Source Watch Winder) – Mod/Upgrade
This project provides a custom mounting plate designed to securely attach an ESP32 (30-pin) , L298N motor driver , and a 15mm Rocker Switch (2-pin) to the OSWW (Open Source Watch Winder) . The plate is specifically tailored to fit the…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 5
P
PrintablesCHÍ TOÀN
L298N-B-Green-Case
Case for L298N-B-Green module. it used for L298N-B-Green module only not fit with L298N-Red module.
- Pobrania
- 56
- Polubienia
- 2
- Ocena
- 0
P
PrintablesShmilCat
Mini L298N DC Motor Driver Case
NOTICE !!! - This is for the L298N Mini! not the regular driver. The case is closed by a zip tie and includes mounting holes the mini does not have the heatsinks, the screw connector or the enable input. however it is smaller (and…
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFrankWL
Arduino Montagerahmen für L298 Motortreiber-Platine
Arduino Montagerahmen für L298 Motortreiberplatine Print Settings Printer Brand: Anycubic Printer: Photon Resolution: 0,2mm Infill: 20% Filament: Anycubic PLA red Category: 3D Printing
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMath
DIN Rail Mount for L298N motor control driver / double H-bridge
This mount places the L298N motor controller on your DIN rail, saving you some space in your electronics assembly. It fits this motor controller board from e.g. Reichelt:…
- Pobrania
- 48
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichael Samblanet
Bestep L298N Housing
I have a L298N motor driver board that does not match the housing available on Printables, so I made my own housing. Board is labeled as a "Bestep" L298N" Consists of a main body + friction fit lit. While I added some ventilation slits,…
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCallmelee
Obtsacle Avoiding Robot using L298N
This is another version of the obstacle Avoidance robot using Arduino Board. all the files are printable, watch my video for making it, The video here: https://www.youtube.com/watch?v=v97VBkiN7e8&t=340s&ab_channel=LeeCuriosity It takes me…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
Printablesfabse-hack
L298N Lego mount
L298N LEGO Mount Integrate your L298N motor driver seamlessly into your LEGO projects with this custom mount. Designed for compatibility with standard LEGO components, this mount provides a stable and reliable platform for your motor…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChristopher Andrzejewski
DROK L298 Dual H Bridge Motor Controller Vented Case
Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPEDRITO LOQUITO
Puente H L298N a escala 1:1
Este modelo no esta echo por mi: Creditos A Lemos
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesShmilCat
Double L298N Case with Zip-Tie closure and Screw holes for placement
This is a case for 2 L298N boards, if you need two and don't want to use two separate cases :-) Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20% Notes: should print fine with any…
- Pobrania
- 31
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKDM3Dmodels
L298 motor driver
This is for creating circuit diagrams in a 3D model
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAlex
L298 Module Bottom Cover
Clip-on bottom cover for a 44mmx44mm L298 module PCB. ✓ Prevents the module from scratching your desk. ✓ Enables you to place the module on conductive surfaces. ✓ Clip-on, no screws. The sample in the photos is printed in PLA, 0.2mm layer…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
Printablesctheroux
Solarbotics L298 Compact Motor Driver Drilling and Mounting Plates
This thing contains a mounting plate and a drilling guide for the “Solarbotics L298 Compact Motor Driver”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOmer Droub
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSaleh Hasanli
L298N motor driver case
This is my first project that I make it can be inaccurate. You can tell what is wrong in model
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSaleh Hasanli
Updated L298N motor driver case
You can put your motor driver. Updates: L298N Logo, more curved edges, space for 2-sided tape
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChristopher Andrzejewski
New custom tray for rack supporting DROK L298 Dual H Bridge Motor Controller
Newly Updated** I love this raspberry pi rack made available from jonthemiller! I needed a tray that would support a DROK L298 Dual H Bridge Motor Controller and rebuilt it to support a L268 and amended ports. with ventilation. I have…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSatzende
L298D Motor Driver Mouning Plate + esp32 mount
Kann mit https://www.printables.com/model/263841-smars-l-v01-arduino-mega verwendet werden. Bietet platz für ein ESP32 Wroom32 modul das Original stammt von https://www.printables.com/@ctheroux
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOnur NEŞVAT
Stor Perde Motor Kutusu V5 — ESP-01 / L298N / JGY-370
Stor perdenin boncuk zincirini 12 V redüktörlü DC motorla hareket ettirmek için tasarlanmış, duvara monte bir motor ve elektronik kutusu. Gövde, sökülebilir ön kapak ve kasnak olmak üzere üç baskı parçasından oluşur. Zincir kılavuzu…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printables
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
