1 / 2
Arduino UNO case with room for L298 motor shield
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was created to be able to mount an Arduino UNO with a L298 motor shield for DCC++. This is used in model railroads.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This is intended for holding an Arduino UNO with an L298 motor shield on top of it. The cover is a snap fit with access to the L298 connection screws.
This was printed at .2mm layer in PLA.